diff options
Diffstat (limited to 'include/asm-blackfin/mach-bf561/bfin_serial_5xx.h')
| -rw-r--r-- | include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 164 |
1 files changed, 0 insertions, 164 deletions
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h deleted file mode 100644 index 8aa02780e642..000000000000 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * file: include/asm-blackfin/mach-bf561/bfin_serial_5xx.h - * based on: - * author: - * - * created: - * description: - * blackfin serial driver head file - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. - */ - -#include <linux/serial.h> -#include <asm/dma.h> -#include <asm/portmux.h> - -#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) -#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) -#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) -#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) -#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) -#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) -#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) - -#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) -#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) -#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) -#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) -#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) -#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) -#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) -#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) - -#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) -#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) - -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) -#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) -#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) - -#ifdef CONFIG_BFIN_UART0_CTSRTS -# define CONFIG_SERIAL_BFIN_CTSRTS -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_port { - struct uart_port port; - unsigned int old_status; - unsigned int lsr; -#ifdef CONFIG_SERIAL_BFIN_DMA - int tx_done; - int tx_count; - struct circ_buf rx_dma_buf; - struct timer_list rx_dma_timer; - int rx_dma_nrows; - unsigned int tx_dma_channel; - unsigned int rx_dma_channel; - struct work_struct tx_dma_workqueue; -#else -# if ANOMALY_05000230 - unsigned int anomaly_threshold; -# endif -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct timer_list cts_timer; - int cts_pin; - int rts_pin; -#endif -}; - -/* The hardware clears the LSR bits upon read, so we need to cache - * some of the more fun bits in software so they don't get lost - * when checking the LSR in other code paths (TX). - */ -static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) -{ - unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); - uart->lsr |= (lsr & (BI|FE|PE|OE)); - return lsr | uart->lsr; -} - -static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) -{ - uart->lsr = 0; - bfin_write16(uart->port.membase + OFFSET_LSR, -1); -} - -struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { - { - 0xFFC00400, - IRQ_UART_RX, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART_TX, - CH_UART_RX, -#endif -#ifdef CONFIG_BFIN_UART0_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - } -}; - -#define DRIVER_NAME "bfin-uart" - -int nr_ports = BFIN_UART_NR_PORTS; -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_input(uart->rts_pin, 0); - } -#endif -} |