diff options
Diffstat (limited to 'include/asm-i386/mach-visws')
| -rw-r--r-- | include/asm-i386/mach-visws/cobalt.h | 125 | ||||
| -rw-r--r-- | include/asm-i386/mach-visws/do_timer.h | 52 | ||||
| -rw-r--r-- | include/asm-i386/mach-visws/entry_arch.h | 23 | ||||
| -rw-r--r-- | include/asm-i386/mach-visws/irq_vectors.h | 62 | ||||
| -rw-r--r-- | include/asm-i386/mach-visws/lithium.h | 53 | ||||
| -rw-r--r-- | include/asm-i386/mach-visws/mach_apic.h | 100 | ||||
| -rw-r--r-- | include/asm-i386/mach-visws/mach_apicdef.h | 12 | ||||
| -rw-r--r-- | include/asm-i386/mach-visws/piix4.h | 107 | ||||
| -rw-r--r-- | include/asm-i386/mach-visws/setup_arch_post.h | 49 | ||||
| -rw-r--r-- | include/asm-i386/mach-visws/setup_arch_pre.h | 5 | ||||
| -rw-r--r-- | include/asm-i386/mach-visws/smpboot_hooks.h | 24 |
11 files changed, 612 insertions, 0 deletions
diff --git a/include/asm-i386/mach-visws/cobalt.h b/include/asm-i386/mach-visws/cobalt.h new file mode 100644 index 000000000000..33c36225a042 --- /dev/null +++ b/include/asm-i386/mach-visws/cobalt.h @@ -0,0 +1,125 @@ +#ifndef __I386_SGI_COBALT_H +#define __I386_SGI_COBALT_H + +#include <asm/fixmap.h> + +/* + * Cobalt SGI Visual Workstation system ASIC + */ + +#define CO_CPU_NUM_PHYS 0x1e00 +#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2) + +#define CO_CPU_MAX 4 + +#define CO_CPU_PHYS 0xc2000000 +#define CO_APIC_PHYS 0xc4000000 + +/* see set_fixmap() and asm/fixmap.h */ +#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU)) +#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC)) + +/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */ +#define CO_CPU_REV 0x08 +#define CO_CPU_CTRL 0x10 +#define CO_CPU_STAT 0x20 +#define CO_CPU_TIMEVAL 0x30 + +/* CO_CPU_CTRL bits */ +#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */ +#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */ + +/* CO_CPU_STATUS bits */ +#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */ + +/* CO_CPU_TIMEVAL value */ +#define CO_TIME_HZ 100000000 /* Cobalt core rate */ + +/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */ +#define CO_APIC_HI(n) (((n) * 0x10) + 4) +#define CO_APIC_LO(n) ((n) * 0x10) +#define CO_APIC_ID 0x0ffc + +/* CO_APIC_ID bits */ +#define CO_APIC_ENABLE 0x00000100 + +/* CO_APIC_LO bits */ +#define CO_APIC_MASK 0x00010000 /* 0 = enabled */ +#define CO_APIC_LEVEL 0x00008000 /* 0 = edge */ + +/* + * Where things are physically wired to Cobalt + * #defines with no board _<type>_<rev>_ are common to all (thus far) + */ +#define CO_APIC_IDE0 4 +#define CO_APIC_IDE1 2 /* Only on 320 */ + +#define CO_APIC_8259 12 /* serial, floppy, par-l-l */ + +/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */ +#define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */ +#define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */ + +#define CO_APIC_PIIX4_USB 7 /* this one is weird */ + +/* Lithium PCI Bridge B -- "the one with PIIX4" */ +#define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */ +#define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */ + +#define CO_APIC_VIDOUT0 16 +#define CO_APIC_VIDOUT1 17 +#define CO_APIC_VIDIN0 18 +#define CO_APIC_VIDIN1 19 + +#define CO_APIC_LI_AUDIO 22 + +#define CO_APIC_AS 24 +#define CO_APIC_RE 25 + +#define CO_APIC_CPU 28 /* Timer and Cache interrupt */ +#define CO_APIC_NMI 29 +#define CO_APIC_LAST CO_APIC_NMI + +/* + * This is how irqs are assigned on the Visual Workstation. + * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU). + * All other devices (including PCI) go to Cobalt and are irq's 16 on up. + */ +#define CO_IRQ_APIC0 16 /* irq of apic entry 0 */ +#define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0) +#define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */ +#define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */ +#define CO_IRQ_IDE0 14 /* knowledge of... */ +#define CO_IRQ_IDE1 15 /* ... ide driver defaults! */ +#define CO_IRQ_8259 CO_IRQ(CO_APIC_8259) + +#ifdef CONFIG_X86_VISWS_APIC +extern __inline void co_cpu_write(unsigned long reg, unsigned long v) +{ + *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v; +} + +extern __inline unsigned long co_cpu_read(unsigned long reg) +{ + return *((volatile unsigned long *)(CO_CPU_VADDR+reg)); +} + +extern __inline void co_apic_write(unsigned long reg, unsigned long v) +{ + *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v; +} + +extern __inline unsigned long co_apic_read(unsigned long reg) +{ + return *((volatile unsigned long *)(CO_APIC_VADDR+reg)); +} +#endif + +extern char visws_board_type; + +#define VISWS_320 0 +#define VISWS_540 1 + +extern char visws_board_rev; + +#endif /* __I386_SGI_COBALT_H */ diff --git a/include/asm-i386/mach-visws/do_timer.h b/include/asm-i386/mach-visws/do_timer.h new file mode 100644 index 000000000000..33acd50fd9a8 --- /dev/null +++ b/include/asm-i386/mach-visws/do_timer.h @@ -0,0 +1,52 @@ +/* defines for inline arch setup functions */ + +#include <asm/fixmap.h> +#include "cobalt.h" + +static inline void do_timer_interrupt_hook(struct pt_regs *regs) +{ + /* Clear the interrupt */ + co_cpu_write(CO_CPU_STAT,co_cpu_read(CO_CPU_STAT) & ~CO_STAT_TIMEINTR); + + do_timer(regs); +#ifndef CONFIG_SMP + update_process_times(user_mode(regs)); +#endif +/* + * In the SMP case we use the local APIC timer interrupt to do the + * profiling, except when we simulate SMP mode on a uniprocessor + * system, in that case we have to call the local interrupt handler. + */ +#ifndef CONFIG_X86_LOCAL_APIC + profile_tick(CPU_PROFILING, regs); +#else + if (!using_apic_timer) + smp_local_timer_interrupt(regs); +#endif +} + +static inline int do_timer_overflow(int count) +{ + int i; + + spin_lock(&i8259A_lock); + /* + * This is tricky when I/O APICs are used; + * see do_timer_interrupt(). + */ + i = inb(0x20); + spin_unlock(&i8259A_lock); + + /* assumption about timer being IRQ0 */ + if (i & 0x01) { + /* + * We cannot detect lost timer interrupts ... + * well, that's why we call them lost, don't we? :) + * [hmm, on the Pentium and Alpha we can ... sort of] + */ + count -= LATCH; + } else { + printk("do_slow_gettimeoffset(): hardware timer problem?\n"); + } + return count; +} diff --git a/include/asm-i386/mach-visws/entry_arch.h b/include/asm-i386/mach-visws/entry_arch.h new file mode 100644 index 000000000000..b183fa6d83d9 --- /dev/null +++ b/include/asm-i386/mach-visws/entry_arch.h @@ -0,0 +1,23 @@ +/* + * The following vectors are part of the Linux architecture, there + * is no hardware IRQ pin equivalent for them, they are triggered + * through the ICC by us (IPIs) + */ +#ifdef CONFIG_X86_SMP +BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR) +BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR) +BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR) +#endif + +/* + * every pentium local APIC has two 'local interrupts', with a + * soft-definable vector attached to both interrupts, one of + * which is a timer interrupt, the other one is error counter + * overflow. Linux uses the local APIC timer interrupt to get + * a much simpler SMP time architecture: + */ +#ifdef CONFIG_X86_LOCAL_APIC +BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR) +BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR) +BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR) +#endif diff --git a/include/asm-i386/mach-visws/irq_vectors.h b/include/asm-i386/mach-visws/irq_vectors.h new file mode 100644 index 000000000000..cb572d8db505 --- /dev/null +++ b/include/asm-i386/mach-visws/irq_vectors.h @@ -0,0 +1,62 @@ +#ifndef _ASM_IRQ_VECTORS_H +#define _ASM_IRQ_VECTORS_H + +/* + * IDT vectors usable for external interrupt sources start + * at 0x20: + */ +#define FIRST_EXTERNAL_VECTOR 0x20 + +#define SYSCALL_VECTOR 0x80 + +/* + * Vectors 0x20-0x2f are used for ISA interrupts. + */ + +/* + * Special IRQ vectors used by the SMP architecture, 0xf0-0xff + * + * some of the following vectors are 'rare', they are merged + * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. + * TLB, reschedule and local APIC vectors are performance-critical. + * + * Vectors 0xf0-0xfa are free (reserved for future Linux use). + */ +#define SPURIOUS_APIC_VECTOR 0xff +#define ERROR_APIC_VECTOR 0xfe +#define INVALIDATE_TLB_VECTOR 0xfd +#define RESCHEDULE_VECTOR 0xfc +#define CALL_FUNCTION_VECTOR 0xfb + +#define THERMAL_APIC_VECTOR 0xf0 +/* + * Local APIC timer IRQ vector is on a different priority level, + * to work around the 'lost local interrupt if more than 2 IRQ + * sources per level' errata. + */ +#define LOCAL_TIMER_VECTOR 0xef + +/* + * First APIC vector available to drivers: (vectors 0x30-0xee) + * we start at 0x31 to spread out vectors evenly between priority + * levels. (0x80 is the syscall vector) + */ +#define FIRST_DEVICE_VECTOR 0x31 +#define FIRST_SYSTEM_VECTOR 0xef + +#define TIMER_IRQ 0 + +/* + * IRQ definitions + */ +#define NR_VECTORS 256 +#define NR_IRQS 224 +#define NR_IRQ_VECTORS NR_IRQS + +#define FPU_IRQ 13 + +#define FIRST_VM86_IRQ 3 +#define LAST_VM86_IRQ 15 +#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) + +#endif /* _ASM_IRQ_VECTORS_H */ diff --git a/include/asm-i386/mach-visws/lithium.h b/include/asm-i386/mach-visws/lithium.h new file mode 100644 index 000000000000..d443e68d0066 --- /dev/null +++ b/include/asm-i386/mach-visws/lithium.h @@ -0,0 +1,53 @@ +#ifndef __I386_SGI_LITHIUM_H +#define __I386_SGI_LITHIUM_H + +#include <asm/fixmap.h> + +/* + * Lithium is the SGI Visual Workstation I/O ASIC + */ + +#define LI_PCI_A_PHYS 0xfc000000 /* Enet is dev 3 */ +#define LI_PCI_B_PHYS 0xfd000000 /* PIIX4 is here */ + +/* see set_fixmap() and asm/fixmap.h */ +#define LI_PCIA_VADDR (fix_to_virt(FIX_LI_PCIA)) +#define LI_PCIB_VADDR (fix_to_virt(FIX_LI_PCIB)) + +/* Not a standard PCI? (not in linux/pci.h) */ +#define LI_PCI_BUSNUM 0x44 /* lo8: primary, hi8: sub */ +#define LI_PCI_INTEN 0x46 + +/* LI_PCI_INTENT bits */ +#define LI_INTA_0 0x0001 +#define LI_INTA_1 0x0002 +#define LI_INTA_2 0x0004 +#define LI_INTA_3 0x0008 +#define LI_INTA_4 0x0010 +#define LI_INTB 0x0020 +#define LI_INTC 0x0040 +#define LI_INTD 0x0080 + +/* More special purpose macros... */ +extern __inline void li_pcia_write16(unsigned long reg, unsigned short v) +{ + *((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v; +} + +extern __inline unsigned short li_pcia_read16(unsigned long reg) +{ + return *((volatile unsigned short *)(LI_PCIA_VADDR+reg)); +} + +extern __inline void li_pcib_write16(unsigned long reg, unsigned short v) +{ + *((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v; +} + +extern __inline unsigned short li_pcib_read16(unsigned long reg) +{ + return *((volatile unsigned short *)(LI_PCIB_VADDR+reg)); +} + +#endif + diff --git a/include/asm-i386/mach-visws/mach_apic.h b/include/asm-i386/mach-visws/mach_apic.h new file mode 100644 index 000000000000..4e6cdfb8b091 --- /dev/null +++ b/include/asm-i386/mach-visws/mach_apic.h @@ -0,0 +1,100 @@ +#ifndef __ASM_MACH_APIC_H +#define __ASM_MACH_APIC_H + +#include <mach_apicdef.h> +#include <asm/smp.h> + +#define APIC_DFR_VALUE (APIC_DFR_FLAT) + +#define no_balance_irq (0) +#define esr_disable (0) + +#define NO_IOAPIC_CHECK (0) + +#define INT_DELIVERY_MODE dest_LowestPrio +#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */ + +#ifdef CONFIG_SMP + #define TARGET_CPUS cpu_online_map +#else + #define TARGET_CPUS cpumask_of_cpu(0) +#endif + +#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap) +#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map) + +static inline int apic_id_registered(void) +{ + return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map); +} + +/* + * Set up the logical destination ID. + * + * Intel recommends to set DFR, LDR and TPR before enabling + * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel + * document number 292116). So here it goes... + */ +static inline void init_apic_ldr(void) +{ + unsigned long val; + + apic_write_around(APIC_DFR, APIC_DFR_VALUE); + val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; + val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id()); + apic_write_around(APIC_LDR, val); +} + +static inline void summit_check(char *oem, char *productid) +{ +} + +static inline void clustered_apic_check(void) +{ +} + +/* Mapping from cpu number to logical apicid */ +static inline int cpu_to_logical_apicid(int cpu) +{ + return 1 << cpu; +} + +static inline int cpu_present_to_apicid(int mps_cpu) +{ + if (mps_cpu < get_physical_broadcast()) + return mps_cpu; + else + return BAD_APICID; +} + +static inline physid_mask_t apicid_to_cpu_present(int apicid) +{ + return physid_mask_of_physid(apicid); +} + +#define WAKE_SECONDARY_VIA_INIT + +static inline void setup_portio_remap(void) +{ +} + +static inline void enable_apic_mode(void) +{ +} + +static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) +{ + return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map); +} + +static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) +{ + return cpus_addr(cpumask)[0]; +} + +static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) +{ + return cpuid_apic >> index_msb; +} + +#endif /* __ASM_MACH_APIC_H */ diff --git a/include/asm-i386/mach-visws/mach_apicdef.h b/include/asm-i386/mach-visws/mach_apicdef.h new file mode 100644 index 000000000000..826cfa97d778 --- /dev/null +++ b/include/asm-i386/mach-visws/mach_apicdef.h @@ -0,0 +1,12 @@ +#ifndef __ASM_MACH_APICDEF_H +#define __ASM_MACH_APICDEF_H + +#define APIC_ID_MASK (0xF<<24) + +static inline unsigned get_apic_id(unsigned long x) +{ + return (((x)>>24)&0xF); +} +#define GET_APIC_ID(x) get_apic_id(x) + +#endif diff --git a/include/asm-i386/mach-visws/piix4.h b/include/asm-i386/mach-visws/piix4.h new file mode 100644 index 000000000000..83ea4f46e419 --- /dev/null +++ b/include/asm-i386/mach-visws/piix4.h @@ -0,0 +1,107 @@ +#ifndef __I386_SGI_PIIX_H +#define __I386_SGI_PIIX_H + +/* + * PIIX4 as used on SGI Visual Workstations + */ + +#define PIIX_PM_START 0x0F80 + +#define SIO_GPIO_START 0x0FC0 + +#define SIO_PM_START 0x0FC8 + +#define PMBASE PIIX_PM_START +#define GPIREG0 (PMBASE+0x30) +#define GPIREG(x) (GPIREG0+((x)/8)) +#define GPIBIT(x) (1 << ((x)%8)) + +#define PIIX_GPI_BD_ID1 18 +#define PIIX_GPI_BD_ID2 19 +#define PIIX_GPI_BD_ID3 20 +#define PIIX_GPI_BD_ID4 21 +#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1) +#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \ + GPIBIT(PIIX_GPI_BD_ID2) | \ + GPIBIT(PIIX_GPI_BD_ID3) | \ + GPIBIT(PIIX_GPI_BD_ID4) ) + +#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8) + +#define SIO_INDEX 0x2e +#define SIO_DATA 0x2f + +#define SIO_DEV_SEL 0x7 +#define SIO_DEV_ENB 0x30 +#define SIO_DEV_MSB 0x60 +#define SIO_DEV_LSB 0x61 + +#define SIO_GP_DEV 0x7 + +#define SIO_GP_BASE SIO_GPIO_START +#define SIO_GP_MSB (SIO_GP_BASE>>8) +#define SIO_GP_LSB (SIO_GP_BASE&0xff) + +#define SIO_GP_DATA1 (SIO_GP_BASE+0) + +#define SIO_PM_DEV 0x8 + +#define SIO_PM_BASE SIO_PM_START +#define SIO_PM_MSB (SIO_PM_BASE>>8) +#define SIO_PM_LSB (SIO_PM_BASE&0xff) +#define SIO_PM_INDEX (SIO_PM_BASE+0) +#define SIO_PM_DATA (SIO_PM_BASE+1) + +#define SIO_PM_FER2 0x1 + +#define SIO_PM_GP_EN 0x80 + + + +/* + * This is the dev/reg where generating a config cycle will + * result in a PCI special cycle. + */ +#define SPECIAL_DEV 0xff +#define SPECIAL_REG 0x00 + +/* + * PIIX4 needs to see a special cycle with the following data + * to be convinced the processor has gone into the stop grant + * state. PIIX4 insists on seeing this before it will power + * down a system. + */ +#define PIIX_SPECIAL_STOP 0x00120002 + +#define PIIX4_RESET_PORT 0xcf9 +#define PIIX4_RESET_VAL 0x6 + +#define PMSTS_PORT 0xf80 // 2 bytes PM Status +#define PMEN_PORT 0xf82 // 2 bytes PM Enable +#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control + +#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state + +/* + * PMSTS and PMEN I/O bit definitions. + * (Bits are the same in both registers) + */ +#define PM_STS_RSM (1<<15) // Resume Status +#define PM_STS_PWRBTNOR (1<<11) // Power Button Override +#define PM_STS_RTC (1<<10) // RTC status +#define PM_STS_PWRBTN (1<<8) // Power Button Pressed? +#define PM_STS_GBL (1<<5) // Global Status +#define PM_STS_BM (1<<4) // Bus Master Status +#define PM_STS_TMROF (1<<0) // Timer Overflow Status. + +/* + * Stop clock GPI register + */ +#define PIIX_GPIREG0 (0xf80 + 0x30) + +/* + * Stop clock GPI bit in GPIREG0 + */ +#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in + +#endif diff --git a/include/asm-i386/mach-visws/setup_arch_post.h b/include/asm-i386/mach-visws/setup_arch_post.h new file mode 100644 index 000000000000..cdbd895a54b1 --- /dev/null +++ b/include/asm-i386/mach-visws/setup_arch_post.h @@ -0,0 +1,49 @@ +/* Hook for machine specific memory setup. + * + * This is included late in kernel/setup.c so that it can make use of all of + * the static functions. */ + +#define MB (1024 * 1024) + +unsigned long sgivwfb_mem_phys; +unsigned long sgivwfb_mem_size; + +long long mem_size __initdata = 0; + +static char * __init machine_specific_memory_setup(void) +{ + long long gfx_mem_size = 8 * MB; + + mem_size = ALT_MEM_K; + + if (!mem_size) { + printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n"); + mem_size = 128 * MB; + } + + /* + * this hardcodes the graphics memory to 8 MB + * it really should be sized dynamically (or at least + * set as a boot param) + */ + if (!sgivwfb_mem_size) { + printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n"); + sgivwfb_mem_size = 8 * MB; + } + + /* + * Trim to nearest MB + */ + sgivwfb_mem_size &= ~((1 << 20) - 1); + sgivwfb_mem_phys = mem_size - gfx_mem_size; + + add_memory_region(0, LOWMEMSIZE(), E820_RAM); + add_memory_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM); + add_memory_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED); + + return "PROM"; + + /* Remove gcc warnings */ + (void) sanitize_e820_map(NULL, NULL); + (void) copy_e820_map(NULL, 0); +} diff --git a/include/asm-i386/mach-visws/setup_arch_pre.h b/include/asm-i386/mach-visws/setup_arch_pre.h new file mode 100644 index 000000000000..b92d6d9a4d3c --- /dev/null +++ b/include/asm-i386/mach-visws/setup_arch_pre.h @@ -0,0 +1,5 @@ +/* Hook to call BIOS initialisation function */ + +/* no action for visws */ + +#define ARCH_SETUP diff --git a/include/asm-i386/mach-visws/smpboot_hooks.h b/include/asm-i386/mach-visws/smpboot_hooks.h new file mode 100644 index 000000000000..d926471fa359 --- /dev/null +++ b/include/asm-i386/mach-visws/smpboot_hooks.h @@ -0,0 +1,24 @@ +static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip) +{ + CMOS_WRITE(0xa, 0xf); + local_flush_tlb(); + Dprintk("1.\n"); + *((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4; + Dprintk("2.\n"); + *((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf; + Dprintk("3.\n"); +} + +/* for visws do nothing for any of these */ + +static inline void smpboot_clear_io_apic_irqs(void) +{ +} + +static inline void smpboot_restore_warm_reset_vector(void) +{ +} + +static inline void smpboot_setup_io_apic(void) +{ +} |