summaryrefslogtreecommitdiff
path: root/include/asm-mips/hazards.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-mips/hazards.h')
-rw-r--r--include/asm-mips/hazards.h58
1 files changed, 47 insertions, 11 deletions
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h
index f524eaccd5f1..7517189e469f 100644
--- a/include/asm-mips/hazards.h
+++ b/include/asm-mips/hazards.h
@@ -74,7 +74,8 @@
#define irq_disable_hazard
_ehb
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
+ defined(CONFIG_CPU_SB1)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
@@ -107,6 +108,7 @@ __asm__(
" .endm \n\t");
#ifdef CONFIG_CPU_RM9000
+
/*
* RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
* use of the JTLB for instructions should not occur for 4 cpu cycles and use
@@ -124,6 +126,9 @@ __asm__(
".set\tmips32\n\t" \
"_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
".set\tmips0")
+
+#define back_to_back_c0_hazard() do { } while (0)
+
#else
/*
@@ -144,15 +149,13 @@ __asm__(
#endif
/*
- * mtc0->mfc0 hazard
- * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
- * It is a MIPS32R2 processor so ehb will clear the hazard.
+ * Interrupt enable/disable hazards
+ * Some processors have hazards when modifying
+ * the status register to change the interrupt state
*/
#ifdef CONFIG_CPU_MIPSR2
-/*
- * Use a macro for ehb unless explicit support for MIPSR2 is enabled
- */
+
__asm__(
" .macro\tirq_enable_hazard \n\t"
" _ehb \n\t"
@@ -160,17 +163,26 @@ __asm__(
" \n\t"
" .macro\tirq_disable_hazard \n\t"
" _ehb \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " .macro\tback_to_back_c0_hazard \n\t"
+ " _ehb \n\t"
" .endm");
#define irq_enable_hazard() \
__asm__ __volatile__( \
- "_ehb\t\t\t\t# irq_enable_hazard")
+ "irq_enable_hazard")
#define irq_disable_hazard() \
__asm__ __volatile__( \
- "_ehb\t\t\t\t# irq_disable_hazard")
+ "irq_disable_hazard")
+
+#define back_to_back_c0_hazard() \
+ __asm__ __volatile__( \
+ "back_to_back_c0_hazard")
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
+ defined(CONFIG_CPU_SB1)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
@@ -186,6 +198,8 @@ __asm__(
#define irq_enable_hazard() do { } while (0)
#define irq_disable_hazard() do { } while (0)
+#define back_to_back_c0_hazard() do { } while (0)
+
#else
/*
@@ -208,10 +222,32 @@ __asm__(
#define irq_enable_hazard() do { } while (0)
#define irq_disable_hazard() \
__asm__ __volatile__( \
- "_ssnop; _ssnop; _ssnop;\t\t# irq_disable_hazard")
+ "irq_disable_hazard")
+
+#define back_to_back_c0_hazard() \
+ __asm__ __volatile__( \
+ " .set noreorder \n" \
+ " nop; nop; nop \n" \
+ " .set reorder \n")
#endif
+#ifdef CONFIG_CPU_MIPSR2
+#define instruction_hazard() \
+do { \
+__label__ __next; \
+ __asm__ __volatile__( \
+ " jr.hb %0 \n" \
+ : \
+ : "r" (&&__next)); \
+__next: \
+ ; \
+} while (0)
+
+#else
+#define instruction_hazard() do { } while (0)
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_HAZARDS_H */