1 files changed, 0 insertions, 129 deletions
diff --git a/include/asm-mips/sn/intr.h b/include/asm-mips/sn/intr.h
deleted file mode 100644
index 6718b644b970..000000000000
--- a/include/asm-mips/sn/intr.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
- */
-#ifndef __ASM_SN_INTR_H
-#define __ASM_SN_INTR_H
-
-/* Number of interrupt levels associated with each interrupt register. */
-#define N_INTPEND_BITS		64
-
-#define INT_PEND0_BASELVL	0
-#define INT_PEND1_BASELVL	64
-
-#define	N_INTPENDJUNK_BITS	8
-#define	INTPENDJUNK_CLRBIT	0x80
-
-/*
- * Macros to manipulate the interrupt register on the calling hub chip.
- */
-
-#define LOCAL_HUB_SEND_INTR(level)				\
-	LOCAL_HUB_S(PI_INT_PEND_MOD, (0x100 | (level)))
-#define REMOTE_HUB_SEND_INTR(hub, level)			\
-	REMOTE_HUB_S((hub), PI_INT_PEND_MOD, (0x100 | (level)))
-
-/*
- * When clearing the interrupt, make sure this clear does make it
- * to the hub. Otherwise we could end up losing interrupts.
- * We do an uncached load of the int_pend0 register to ensure this.
- */
-
-#define LOCAL_HUB_CLR_INTR(level)	  			\
-do {								\
-	LOCAL_HUB_S(PI_INT_PEND_MOD, (level));			\
-	LOCAL_HUB_L(PI_INT_PEND0);				\
-} while (0);
-
-#define REMOTE_HUB_CLR_INTR(hub, level)				\
-do {								\
-	nasid_t  __hub = (hub);					\
-								\
-	REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level));		\
-	REMOTE_HUB_L(__hub, PI_INT_PEND0);			\
-} while (0);
-
-/*
- * Hard-coded interrupt levels:
- */
-
-/*
- *	L0 = SW1
- *	L1 = SW2
- *	L2 = INT_PEND0
- *	L3 = INT_PEND1
- *	L4 = RTC
- *	L5 = Profiling Timer
- *	L6 = Hub Errors
- *	L7 = Count/Compare (T5 counters)
- */
-
-
-/*
- * INT_PEND0 hard-coded bits.
- */
-
-/*
- * INT_PEND0 bits determined by hardware:
- */
-#define RESERVED_INTR		 0	/* What is this bit? */
-#define GFX_INTR_A		 1
-#define GFX_INTR_B		 2
-#define PG_MIG_INTR		 3
-#define UART_INTR		 4
-#define CC_PEND_A		 5
-#define CC_PEND_B		 6
-
-/*
- * INT_PEND0 used by the kernel for itself ...
- */
-#define CPU_RESCHED_A_IRQ	 7
-#define CPU_RESCHED_B_IRQ	 8
-#define CPU_CALL_A_IRQ		 9
-#define CPU_CALL_B_IRQ		10
-#define MSC_MESG_INTR		11
-#define BASE_PCI_IRQ		12
-
-/*
- * INT_PEND0 again, bits determined by hardware / hardcoded:
- */
-#define SDISK_INTR		63	/* SABLE name */
-#define IP_PEND0_6_63		63	/* What is this bit? */
-
-/*
- * INT_PEND1 hard-coded bits:
- */
-#define NI_BRDCAST_ERR_A	39
-#define NI_BRDCAST_ERR_B	40
-
-#define LLP_PFAIL_INTR_A	41	/* see ml/SN/SN0/sysctlr.c */
-#define LLP_PFAIL_INTR_B	42
-
-#define	TLB_INTR_A		43	/* used for tlb flush random */
-#define	TLB_INTR_B		44
-
-#define IP27_INTR_0		45	/* Reserved for PROM use */
-#define IP27_INTR_1		46	/* do not use in Kernel */
-#define IP27_INTR_2		47
-#define IP27_INTR_3		48
-#define IP27_INTR_4		49
-#define IP27_INTR_5		50
-#define IP27_INTR_6		51
-#define IP27_INTR_7		52
-
-#define BRIDGE_ERROR_INTR	53	/* Setup by PROM to catch	*/
-					/* Bridge Errors */
-#define	DEBUG_INTR_A		54
-#define	DEBUG_INTR_B		55	/* Used by symmon to stop all cpus */
-#define IO_ERROR_INTR		57	/* Setup by PROM */
-#define CLK_ERR_INTR		58
-#define COR_ERR_INTR_A		59
-#define COR_ERR_INTR_B		60
-#define MD_COR_ERR_INTR		61
-#define NI_ERROR_INTR		62
-#define MSC_PANIC_INTR		63
-
-#endif /* __ASM_SN_INTR_H */