diff options
Diffstat (limited to 'include/asm-parisc/pdc.h')
| -rw-r--r-- | include/asm-parisc/pdc.h | 757 |
1 files changed, 0 insertions, 757 deletions
diff --git a/include/asm-parisc/pdc.h b/include/asm-parisc/pdc.h deleted file mode 100644 index 9eaa794c3e4a..000000000000 --- a/include/asm-parisc/pdc.h +++ /dev/null @@ -1,757 +0,0 @@ -#ifndef _PARISC_PDC_H -#define _PARISC_PDC_H - -/* - * PDC return values ... - * All PDC calls return a subset of these errors. - */ - -#define PDC_WARN 3 /* Call completed with a warning */ -#define PDC_REQ_ERR_1 2 /* See above */ -#define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */ -#define PDC_OK 0 /* Call completed successfully */ -#define PDC_BAD_PROC -1 /* Called non-existent procedure*/ -#define PDC_BAD_OPTION -2 /* Called with non-existent option */ -#define PDC_ERROR -3 /* Call could not complete without an error */ -#define PDC_NE_MOD -5 /* Module not found */ -#define PDC_NE_CELL_MOD -7 /* Cell module not found */ -#define PDC_INVALID_ARG -10 /* Called with an invalid argument */ -#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */ -#define PDC_NOT_NARROW -17 /* Narrow mode not supported */ - -/* - * PDC entry points... - */ - -#define PDC_POW_FAIL 1 /* perform a power-fail */ -#define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */ - -#define PDC_CHASSIS 2 /* PDC-chassis functions */ -#define PDC_CHASSIS_DISP 0 /* update chassis display */ -#define PDC_CHASSIS_WARN 1 /* return chassis warnings */ -#define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */ -#define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */ - -#define PDC_PIM 3 /* Get PIM data */ -#define PDC_PIM_HPMC 0 /* Transfer HPMC data */ -#define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/ -#define PDC_PIM_LPMC 2 /* Transfer HPMC data */ -#define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */ -#define PDC_PIM_TOC 4 /* Transfer TOC data */ - -#define PDC_MODEL 4 /* PDC model information call */ -#define PDC_MODEL_INFO 0 /* returns information */ -#define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */ -#define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/ -#define PDC_MODEL_SYSMODEL 3 /* return system model info */ -#define PDC_MODEL_ENSPEC 4 /* enable specific option */ -#define PDC_MODEL_DISPEC 5 /* disable specific option */ -#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */ -#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */ -/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */ -#define PDC_MODEL_IOPDIR_FDC (1 << 2) -#define PDC_MODEL_NVA_MASK (3 << 4) -#define PDC_MODEL_NVA_SUPPORTED (0 << 4) -#define PDC_MODEL_NVA_SLOW (1 << 4) -#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4) -#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */ -#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */ - -#define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */ -#define PA90_INSTRUCTION_SET 0x8 - -#define PDC_CACHE 5 /* return/set cache (& TLB) info*/ -#define PDC_CACHE_INFO 0 /* returns information */ -#define PDC_CACHE_SET_COH 1 /* set coherence state */ -#define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */ - -#define PDC_HPA 6 /* return HPA of processor */ -#define PDC_HPA_PROCESSOR 0 -#define PDC_HPA_MODULES 1 - -#define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */ -#define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */ - -#define PDC_IODC 8 /* talk to IODC */ -#define PDC_IODC_READ 0 /* read IODC entry point */ -/* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */ -#define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */ -/* 1, 2 obsolete - HVERSION dependent*/ -#define PDC_IODC_RI_INIT 3 /* Initialize module */ -#define PDC_IODC_RI_IO 4 /* Module input/output */ -#define PDC_IODC_RI_SPA 5 /* Module input/output */ -#define PDC_IODC_RI_CONFIG 6 /* Module input/output */ -/* 7 obsolete - HVERSION dependent */ -#define PDC_IODC_RI_TEST 8 /* Module input/output */ -#define PDC_IODC_RI_TLB 9 /* Module input/output */ -#define PDC_IODC_NINIT 2 /* non-destructive init */ -#define PDC_IODC_DINIT 3 /* destructive init */ -#define PDC_IODC_MEMERR 4 /* check for memory errors */ -#define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */ -#define PDC_IODC_BUS_ERROR -4 /* bus error return value */ -#define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */ -#define PDC_IODC_COUNT -6 /* count is too small */ - -#define PDC_TOD 9 /* time-of-day clock (TOD) */ -#define PDC_TOD_READ 0 /* read TOD */ -#define PDC_TOD_WRITE 1 /* write TOD */ - - -#define PDC_STABLE 10 /* stable storage (sprockets) */ -#define PDC_STABLE_READ 0 -#define PDC_STABLE_WRITE 1 -#define PDC_STABLE_RETURN_SIZE 2 -#define PDC_STABLE_VERIFY_CONTENTS 3 -#define PDC_STABLE_INITIALIZE 4 - -#define PDC_NVOLATILE 11 /* often not implemented */ - -#define PDC_ADD_VALID 12 /* Memory validation PDC call */ -#define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */ - -#define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */ - -#define PDC_PROC 16 /* (sprockets) */ - -#define PDC_CONFIG 16 /* (sprockets) */ -#define PDC_CONFIG_DECONFIG 0 -#define PDC_CONFIG_DRECONFIG 1 -#define PDC_CONFIG_DRETURN_CONFIG 2 - -#define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */ -#define PDC_BTLB_INFO 0 /* returns parameter */ -#define PDC_BTLB_INSERT 1 /* insert BTLB entry */ -#define PDC_BTLB_PURGE 2 /* purge BTLB entries */ -#define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */ - -#define PDC_TLB 19 /* manage hardware TLB miss handling */ -#define PDC_TLB_INFO 0 /* returns parameter */ -#define PDC_TLB_SETUP 1 /* set up miss handling */ - -#define PDC_MEM 20 /* Manage memory */ -#define PDC_MEM_MEMINFO 0 -#define PDC_MEM_ADD_PAGE 1 -#define PDC_MEM_CLEAR_PDT 2 -#define PDC_MEM_READ_PDT 3 -#define PDC_MEM_RESET_CLEAR 4 -#define PDC_MEM_GOODMEM 5 -#define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */ -#define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE -#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131 -#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132 -#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133 - -#define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */ -#define PDC_MEM_RET_DUPLICATE_ENTRY 4 -#define PDC_MEM_RET_BUF_SIZE_SMALL 1 -#define PDC_MEM_RET_PDT_FULL -11 -#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL - -#define PDC_PSW 21 /* Get/Set default System Mask */ -#define PDC_PSW_MASK 0 /* Return mask */ -#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */ -#define PDC_PSW_SET_DEFAULTS 2 /* Set default */ -#define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */ -#define PDC_PSW_WIDE_BIT 2 /* set for wide mode */ - -#define PDC_SYSTEM_MAP 22 /* find system modules */ -#define PDC_FIND_MODULE 0 -#define PDC_FIND_ADDRESS 1 -#define PDC_TRANSLATE_PATH 2 - -#define PDC_SOFT_POWER 23 /* soft power switch */ -#define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */ -#define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */ - - -/* HVERSION dependent */ - -/* The PDC_MEM_MAP calls */ -#define PDC_MEM_MAP 128 /* on s700: return page info */ -#define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */ - -#define PDC_EEPROM 129 /* EEPROM access */ -#define PDC_EEPROM_READ_WORD 0 -#define PDC_EEPROM_WRITE_WORD 1 -#define PDC_EEPROM_READ_BYTE 2 -#define PDC_EEPROM_WRITE_BYTE 3 -#define PDC_EEPROM_EEPROM_PASSWORD -1000 - -#define PDC_NVM 130 /* NVM (non-volatile memory) access */ -#define PDC_NVM_READ_WORD 0 -#define PDC_NVM_WRITE_WORD 1 -#define PDC_NVM_READ_BYTE 2 -#define PDC_NVM_WRITE_BYTE 3 - -#define PDC_SEED_ERROR 132 /* (sprockets) */ - -#define PDC_IO 135 /* log error info, reset IO system */ -#define PDC_IO_READ_AND_CLEAR_ERRORS 0 -#define PDC_IO_RESET 1 -#define PDC_IO_RESET_DEVICES 2 -/* sets bits 6&7 (little endian) of the HcControl Register */ -#define PDC_IO_USB_SUSPEND 0xC000000000000000 -#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */ -#define PDC_IO_NO_SUSPEND -6 /* return value */ - -#define PDC_BROADCAST_RESET 136 /* reset all processors */ -#define PDC_DO_RESET 0 /* option: perform a broadcast reset */ -#define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */ -#define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */ -#define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */ - -#define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */ -#define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */ - -#define PDC_LAN_STATION_ID_SIZE 6 - -#define PDC_CHECK_RANGES 139 /* (sprockets) */ - -#define PDC_NV_SECTIONS 141 /* (sprockets) */ - -#define PDC_PERFORMANCE 142 /* performance monitoring */ - -#define PDC_SYSTEM_INFO 143 /* system information */ -#define PDC_SYSINFO_RETURN_INFO_SIZE 0 -#define PDC_SYSINFO_RRETURN_SYS_INFO 1 -#define PDC_SYSINFO_RRETURN_ERRORS 2 -#define PDC_SYSINFO_RRETURN_WARNINGS 3 -#define PDC_SYSINFO_RETURN_REVISIONS 4 -#define PDC_SYSINFO_RRETURN_DIAGNOSE 5 -#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005 - -#define PDC_RDR 144 /* (sprockets) */ -#define PDC_RDR_READ_BUFFER 0 -#define PDC_RDR_READ_SINGLE 1 -#define PDC_RDR_WRITE_SINGLE 2 - -#define PDC_INTRIGUE 145 /* (sprockets) */ -#define PDC_INTRIGUE_WRITE_BUFFER 0 -#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1 -#define PDC_INTRIGUE_START_CPU_COUNTERS 2 -#define PDC_INTRIGUE_STOP_CPU_COUNTERS 3 - -#define PDC_STI 146 /* STI access */ -/* same as PDC_PCI_XXX values (see below) */ - -/* Legacy PDC definitions for same stuff */ -#define PDC_PCI_INDEX 147 -#define PDC_PCI_INTERFACE_INFO 0 -#define PDC_PCI_SLOT_INFO 1 -#define PDC_PCI_INFLIGHT_BYTES 2 -#define PDC_PCI_READ_CONFIG 3 -#define PDC_PCI_WRITE_CONFIG 4 -#define PDC_PCI_READ_PCI_IO 5 -#define PDC_PCI_WRITE_PCI_IO 6 -#define PDC_PCI_READ_CONFIG_DELAY 7 -#define PDC_PCI_UPDATE_CONFIG_DELAY 8 -#define PDC_PCI_PCI_PATH_TO_PCI_HPA 9 -#define PDC_PCI_PCI_HPA_TO_PCI_PATH 10 -#define PDC_PCI_PCI_PATH_TO_PCI_BUS 11 -#define PDC_PCI_PCI_RESERVED 12 -#define PDC_PCI_PCI_INT_ROUTE_SIZE 13 -#define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE -#define PDC_PCI_PCI_INT_ROUTE 14 -#define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE -#define PDC_PCI_READ_MON_TYPE 15 -#define PDC_PCI_WRITE_MON_TYPE 16 - - -/* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */ -#define PDC_INITIATOR 163 -#define PDC_GET_INITIATOR 0 -#define PDC_SET_INITIATOR 1 -#define PDC_DELETE_INITIATOR 2 -#define PDC_RETURN_TABLE_SIZE 3 -#define PDC_RETURN_TABLE 4 - -#define PDC_LINK 165 /* (sprockets) */ -#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */ -#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */ - -/* cl_class - * page 3-33 of IO-Firmware ARS - * IODC ENTRY_INIT(Search first) RET[1] - */ -#define CL_NULL 0 /* invalid */ -#define CL_RANDOM 1 /* random access (as disk) */ -#define CL_SEQU 2 /* sequential access (as tape) */ -#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */ -#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */ -#define CL_DISPL 9 /* half-duplex console (display) */ -#define CL_FC 10 /* FiberChannel access media */ - -/* IODC ENTRY_INIT() */ -#define ENTRY_INIT_SRCH_FRST 2 -#define ENTRY_INIT_SRCH_NEXT 3 -#define ENTRY_INIT_MOD_DEV 4 -#define ENTRY_INIT_DEV 5 -#define ENTRY_INIT_MOD 6 -#define ENTRY_INIT_MSG 9 - -/* IODC ENTRY_IO() */ -#define ENTRY_IO_BOOTIN 0 -#define ENTRY_IO_BOOTOUT 1 -#define ENTRY_IO_CIN 2 -#define ENTRY_IO_COUT 3 -#define ENTRY_IO_CLOSE 4 -#define ENTRY_IO_GETMSG 9 -#define ENTRY_IO_BBLOCK_IN 16 -#define ENTRY_IO_BBLOCK_OUT 17 - -/* IODC ENTRY_SPA() */ - -/* IODC ENTRY_CONFIG() */ - -/* IODC ENTRY_TEST() */ - -/* IODC ENTRY_TLB() */ - -/* constants for OS (NVM...) */ -#define OS_ID_NONE 0 /* Undefined OS ID */ -#define OS_ID_HPUX 1 /* HP-UX OS */ -#define OS_ID_MPEXL 2 /* MPE XL OS */ -#define OS_ID_OSF 3 /* OSF OS */ -#define OS_ID_HPRT 4 /* HP-RT OS */ -#define OS_ID_NOVEL 5 /* NOVELL OS */ -#define OS_ID_LINUX 6 /* Linux */ - - -/* constants for PDC_CHASSIS */ -#define OSTAT_OFF 0 -#define OSTAT_FLT 1 -#define OSTAT_TEST 2 -#define OSTAT_INIT 3 -#define OSTAT_SHUT 4 -#define OSTAT_WARN 5 -#define OSTAT_RUN 6 -#define OSTAT_ON 7 - -/* Page Zero constant offsets used by the HPMC handler */ -#define BOOT_CONSOLE_HPA_OFFSET 0x3c0 -#define BOOT_CONSOLE_SPA_OFFSET 0x3c4 -#define BOOT_CONSOLE_PATH_OFFSET 0x3a8 - -#if !defined(__ASSEMBLY__) -#ifdef __KERNEL__ - -#include <linux/types.h> - -extern int pdc_type; - -/* Values for pdc_type */ -#define PDC_TYPE_ILLEGAL -1 -#define PDC_TYPE_PAT 0 /* 64-bit PAT-PDC */ -#define PDC_TYPE_SYSTEM_MAP 1 /* 32-bit, but supports PDC_SYSTEM_MAP */ -#define PDC_TYPE_SNAKE 2 /* Doesn't support SYSTEM_MAP */ - -struct pdc_chassis_info { /* for PDC_CHASSIS_INFO */ - unsigned long actcnt; /* actual number of bytes returned */ - unsigned long maxcnt; /* maximum number of bytes that could be returned */ -}; - -struct pdc_coproc_cfg { /* for PDC_COPROC_CFG */ - unsigned long ccr_functional; - unsigned long ccr_present; - unsigned long revision; - unsigned long model; -}; - -struct pdc_model { /* for PDC_MODEL */ - unsigned long hversion; - unsigned long sversion; - unsigned long hw_id; - unsigned long boot_id; - unsigned long sw_id; - unsigned long sw_cap; - unsigned long arch_rev; - unsigned long pot_key; - unsigned long curr_key; -}; - -struct pdc_cache_cf { /* for PDC_CACHE (I/D-caches) */ - unsigned long -#ifdef CONFIG_64BIT - cc_padW:32, -#endif - cc_alias: 4, /* alias boundaries for virtual addresses */ - cc_block: 4, /* to determine most efficient stride */ - cc_line : 3, /* maximum amount written back as a result of store (multiple of 16 bytes) */ - cc_shift: 2, /* how much to shift cc_block left */ - cc_wt : 1, /* 0 = WT-Dcache, 1 = WB-Dcache */ - cc_sh : 2, /* 0 = separate I/D-cache, else shared I/D-cache */ - cc_cst : 3, /* 0 = incoherent D-cache, 1=coherent D-cache */ - cc_pad1 : 10, /* reserved */ - cc_hv : 3; /* hversion dependent */ -}; - -struct pdc_tlb_cf { /* for PDC_CACHE (I/D-TLB's) */ - unsigned long tc_pad0:12, /* reserved */ -#ifdef CONFIG_64BIT - tc_padW:32, -#endif - tc_sh : 2, /* 0 = separate I/D-TLB, else shared I/D-TLB */ - tc_hv : 1, /* HV */ - tc_page : 1, /* 0 = 2K page-size-machine, 1 = 4k page size */ - tc_cst : 3, /* 0 = incoherent operations, else coherent operations */ - tc_aid : 5, /* ITLB: width of access ids of processor (encoded!) */ - tc_pad1 : 8; /* ITLB: width of space-registers (encoded) */ -}; - -struct pdc_cache_info { /* main-PDC_CACHE-structure (caches & TLB's) */ - /* I-cache */ - unsigned long ic_size; /* size in bytes */ - struct pdc_cache_cf ic_conf; /* configuration */ - unsigned long ic_base; /* base-addr */ - unsigned long ic_stride; - unsigned long ic_count; - unsigned long ic_loop; - /* D-cache */ - unsigned long dc_size; /* size in bytes */ - struct pdc_cache_cf dc_conf; /* configuration */ - unsigned long dc_base; /* base-addr */ - unsigned long dc_stride; - unsigned long dc_count; - unsigned long dc_loop; - /* Instruction-TLB */ - unsigned long it_size; /* number of entries in I-TLB */ - struct pdc_tlb_cf it_conf; /* I-TLB-configuration */ - unsigned long it_sp_base; - unsigned long it_sp_stride; - unsigned long it_sp_count; - unsigned long it_off_base; - unsigned long it_off_stride; - unsigned long it_off_count; - unsigned long it_loop; - /* data-TLB */ - unsigned long dt_size; /* number of entries in D-TLB */ - struct pdc_tlb_cf dt_conf; /* D-TLB-configuration */ - unsigned long dt_sp_base; - unsigned long dt_sp_stride; - unsigned long dt_sp_count; - unsigned long dt_off_base; - unsigned long dt_off_stride; - unsigned long dt_off_count; - unsigned long dt_loop; -}; - -#if 0 -/* If you start using the next struct, you'll have to adjust it to - * work with 64-bit firmware I think -PB - */ -struct pdc_iodc { /* PDC_IODC */ - unsigned char hversion_model; - unsigned char hversion; - unsigned char spa; - unsigned char type; - unsigned int sversion_rev:4; - unsigned int sversion_model:19; - unsigned int sversion_opt:8; - unsigned char rev; - unsigned char dep; - unsigned char features; - unsigned char pad1; - unsigned int checksum:16; - unsigned int length:16; - unsigned int pad[15]; -} __attribute__((aligned(8))) ; -#endif - -#ifndef CONFIG_PA20 -/* no BLTBs in pa2.0 processors */ -struct pdc_btlb_info_range { - __u8 res00; - __u8 num_i; - __u8 num_d; - __u8 num_comb; -}; - -struct pdc_btlb_info { /* PDC_BLOCK_TLB, return of PDC_BTLB_INFO */ - unsigned int min_size; /* minimum size of BTLB in pages */ - unsigned int max_size; /* maximum size of BTLB in pages */ - struct pdc_btlb_info_range fixed_range_info; - struct pdc_btlb_info_range variable_range_info; -}; - -#endif /* !CONFIG_PA20 */ - -#ifdef CONFIG_64BIT -struct pdc_memory_table_raddr { /* PDC_MEM/PDC_MEM_TABLE (return info) */ - unsigned long entries_returned; - unsigned long entries_total; -}; - -struct pdc_memory_table { /* PDC_MEM/PDC_MEM_TABLE (arguments) */ - unsigned long paddr; - unsigned int pages; - unsigned int reserved; -}; -#endif /* CONFIG_64BIT */ - -struct pdc_system_map_mod_info { /* PDC_SYSTEM_MAP/FIND_MODULE */ - unsigned long mod_addr; - unsigned long mod_pgs; - unsigned long add_addrs; -}; - -struct pdc_system_map_addr_info { /* PDC_SYSTEM_MAP/FIND_ADDRESS */ - unsigned long mod_addr; - unsigned long mod_pgs; -}; - -struct pdc_initiator { /* PDC_INITIATOR */ - int host_id; - int factor; - int width; - int mode; -}; - -struct hardware_path { - char flags; /* see bit definitions below */ - char bc[6]; /* Bus Converter routing info to a specific */ - /* I/O adaptor (< 0 means none, > 63 resvd) */ - char mod; /* fixed field of specified module */ -}; - -/* - * Device path specifications used by PDC. - */ -struct pdc_module_path { - struct hardware_path path; - unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */ -}; - -#ifndef CONFIG_PA20 -/* Only used on some pre-PA2.0 boxes */ -struct pdc_memory_map { /* PDC_MEMORY_MAP */ - unsigned long hpa; /* mod's register set address */ - unsigned long more_pgs; /* number of additional I/O pgs */ -}; -#endif - -struct pdc_tod { - unsigned long tod_sec; - unsigned long tod_usec; -}; - -/* architected results from PDC_PIM/transfer hpmc on a PA1.1 machine */ - -struct pdc_hpmc_pim_11 { /* PDC_PIM */ - __u32 gr[32]; - __u32 cr[32]; - __u32 sr[8]; - __u32 iasq_back; - __u32 iaoq_back; - __u32 check_type; - __u32 cpu_state; - __u32 rsvd1; - __u32 cache_check; - __u32 tlb_check; - __u32 bus_check; - __u32 assists_check; - __u32 rsvd2; - __u32 assist_state; - __u32 responder_addr; - __u32 requestor_addr; - __u32 path_info; - __u64 fr[32]; -}; - -/* - * architected results from PDC_PIM/transfer hpmc on a PA2.0 machine - * - * Note that PDC_PIM doesn't care whether or not wide mode was enabled - * so the results are different on PA1.1 vs. PA2.0 when in narrow mode. - * - * Note also that there are unarchitected results available, which - * are hversion dependent. Do a "ser pim 0 hpmc" after rebooting, since - * the firmware is probably the best way of printing hversion dependent - * data. - */ - -struct pdc_hpmc_pim_20 { /* PDC_PIM */ - __u64 gr[32]; - __u64 cr[32]; - __u64 sr[8]; - __u64 iasq_back; - __u64 iaoq_back; - __u32 check_type; - __u32 cpu_state; - __u32 cache_check; - __u32 tlb_check; - __u32 bus_check; - __u32 assists_check; - __u32 assist_state; - __u32 path_info; - __u64 responder_addr; - __u64 requestor_addr; - __u64 fr[32]; -}; - -void pdc_console_init(void); /* in pdc_console.c */ -void pdc_console_restart(void); - -void setup_pdc(void); /* in inventory.c */ - -/* wrapper-functions from pdc.c */ - -int pdc_add_valid(unsigned long address); -int pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len); -int pdc_chassis_disp(unsigned long disp); -int pdc_chassis_warn(unsigned long *warn); -int pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info); -int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index, - void *iodc_data, unsigned int iodc_data_size); -int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info, - struct pdc_module_path *mod_path, long mod_index); -int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info, - long mod_index, long addr_index); -int pdc_model_info(struct pdc_model *model); -int pdc_model_sysmodel(char *name); -int pdc_model_cpuid(unsigned long *cpu_id); -int pdc_model_versions(unsigned long *versions, int id); -int pdc_model_capabilities(unsigned long *capabilities); -int pdc_cache_info(struct pdc_cache_info *cache); -int pdc_spaceid_bits(unsigned long *space_bits); -#ifndef CONFIG_PA20 -int pdc_btlb_info(struct pdc_btlb_info *btlb); -int pdc_mem_map_hpa(struct pdc_memory_map *r_addr, struct pdc_module_path *mod_path); -#endif /* !CONFIG_PA20 */ -int pdc_lan_station_id(char *lan_addr, unsigned long net_hpa); - -int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count); -int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count); -int pdc_stable_get_size(unsigned long *size); -int pdc_stable_verify_contents(void); -int pdc_stable_initialize(void); - -int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa); -int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl); - -int pdc_get_initiator(struct hardware_path *, struct pdc_initiator *); -int pdc_tod_read(struct pdc_tod *tod); -int pdc_tod_set(unsigned long sec, unsigned long usec); - -#ifdef CONFIG_64BIT -int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr, - struct pdc_memory_table *tbl, unsigned long entries); -#endif - -void set_firmware_width(void); -int pdc_do_firm_test_reset(unsigned long ftc_bitmap); -int pdc_do_reset(void); -int pdc_soft_power_info(unsigned long *power_reg); -int pdc_soft_power_button(int sw_control); -void pdc_io_reset(void); -void pdc_io_reset_devices(void); -int pdc_iodc_getc(void); -int pdc_iodc_print(const unsigned char *str, unsigned count); - -void pdc_emergency_unlock(void); -int pdc_sti_call(unsigned long func, unsigned long flags, - unsigned long inptr, unsigned long outputr, - unsigned long glob_cfg); - -static inline char * os_id_to_string(u16 os_id) { - switch(os_id) { - case OS_ID_NONE: return "No OS"; - case OS_ID_HPUX: return "HP-UX"; - case OS_ID_MPEXL: return "MPE-iX"; - case OS_ID_OSF: return "OSF"; - case OS_ID_HPRT: return "HP-RT"; - case OS_ID_NOVEL: return "Novell Netware"; - case OS_ID_LINUX: return "Linux"; - default: return "Unknown"; - } -} - -#endif /* __KERNEL__ */ - -#define PAGE0 ((struct zeropage *)__PAGE_OFFSET) - -/* DEFINITION OF THE ZERO-PAGE (PAG0) */ -/* based on work by Jason Eckhardt (jason@equator.com) */ - -/* flags of the device_path */ -#define PF_AUTOBOOT 0x80 -#define PF_AUTOSEARCH 0x40 -#define PF_TIMER 0x0F - -struct device_path { /* page 1-69 */ - unsigned char flags; /* flags see above! */ - unsigned char bc[6]; /* bus converter routing info */ - unsigned char mod; - unsigned int layers[6];/* device-specific layer-info */ -} __attribute__((aligned(8))) ; - -struct pz_device { - struct device_path dp; /* see above */ - /* struct iomod *hpa; */ - unsigned int hpa; /* HPA base address */ - /* char *spa; */ - unsigned int spa; /* SPA base address */ - /* int (*iodc_io)(struct iomod*, ...); */ - unsigned int iodc_io; /* device entry point */ - short pad; /* reserved */ - unsigned short cl_class;/* see below */ -} __attribute__((aligned(8))) ; - -struct zeropage { - /* [0x000] initialize vectors (VEC) */ - unsigned int vec_special; /* must be zero */ - /* int (*vec_pow_fail)(void);*/ - unsigned int vec_pow_fail; /* power failure handler */ - /* int (*vec_toc)(void); */ - unsigned int vec_toc; - unsigned int vec_toclen; - /* int (*vec_rendz)(void); */ - unsigned int vec_rendz; - int vec_pow_fail_flen; - int vec_pad[10]; - - /* [0x040] reserved processor dependent */ - int pad0[112]; - - /* [0x200] reserved */ - int pad1[84]; - - /* [0x350] memory configuration (MC) */ - int memc_cont; /* contiguous mem size (bytes) */ - int memc_phsize; /* physical memory size */ - int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */ - unsigned int mem_pdc_hi; /* used for 64-bit */ - - /* [0x360] various parameters for the boot-CPU */ - /* unsigned int *mem_booterr[8]; */ - unsigned int mem_booterr[8]; /* ptr to boot errors */ - unsigned int mem_free; /* first location, where OS can be loaded */ - /* struct iomod *mem_hpa; */ - unsigned int mem_hpa; /* HPA of the boot-CPU */ - /* int (*mem_pdc)(int, ...); */ - unsigned int mem_pdc; /* PDC entry point */ - unsigned int mem_10msec; /* number of clock ticks in 10msec */ - - /* [0x390] initial memory module (IMM) */ - /* struct iomod *imm_hpa; */ - unsigned int imm_hpa; /* HPA of the IMM */ - int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */ - unsigned int imm_spa_size; /* SPA size of the IMM in bytes */ - unsigned int imm_max_mem; /* bytes of mem in IMM */ - - /* [0x3A0] boot console, display device and keyboard */ - struct pz_device mem_cons; /* description of console device */ - struct pz_device mem_boot; /* description of boot device */ - struct pz_device mem_kbd; /* description of keyboard device */ - - /* [0x430] reserved */ - int pad430[116]; - - /* [0x600] processor dependent */ - __u32 pad600[1]; - __u32 proc_sti; /* pointer to STI ROM */ - __u32 pad608[126]; -}; - -#endif /* !defined(__ASSEMBLY__) */ - -#endif /* _PARISC_PDC_H */ |