summaryrefslogtreecommitdiff
path: root/include/asm-powerpc/io.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-powerpc/io.h')
-rw-r--r--include/asm-powerpc/io.h787
1 files changed, 0 insertions, 787 deletions
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
deleted file mode 100644
index 77c7fa025e65..000000000000
--- a/include/asm-powerpc/io.h
+++ /dev/null
@@ -1,787 +0,0 @@
-#ifndef _ASM_POWERPC_IO_H
-#define _ASM_POWERPC_IO_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* Check of existence of legacy devices */
-extern int check_legacy_ioport(unsigned long base_port);
-#define I8042_DATA_REG 0x60
-#define FDC_BASE 0x3f0
-/* only relevant for PReP */
-#define _PIDXR 0x279
-#define _PNPWRP 0xa79
-#define PNPBIOS_BASE 0xf000
-
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-#include <asm/byteorder.h>
-#include <asm/synch.h>
-#include <asm/delay.h>
-#include <asm/mmu.h>
-
-#include <asm-generic/iomap.h>
-
-#ifdef CONFIG_PPC64
-#include <asm/paca.h>
-#endif
-
-#define SIO_CONFIG_RA 0x398
-#define SIO_CONFIG_RD 0x399
-
-#define SLOW_DOWN_IO
-
-/* 32 bits uses slightly different variables for the various IO
- * bases. Most of this file only uses _IO_BASE though which we
- * define properly based on the platform
- */
-#ifndef CONFIG_PCI
-#define _IO_BASE 0
-#define _ISA_MEM_BASE 0
-#define PCI_DRAM_OFFSET 0
-#elif defined(CONFIG_PPC32)
-#define _IO_BASE isa_io_base
-#define _ISA_MEM_BASE isa_mem_base
-#define PCI_DRAM_OFFSET pci_dram_offset
-#else
-#define _IO_BASE pci_io_base
-#define _ISA_MEM_BASE isa_mem_base
-#define PCI_DRAM_OFFSET 0
-#endif
-
-extern unsigned long isa_io_base;
-extern unsigned long pci_io_base;
-extern unsigned long pci_dram_offset;
-
-extern resource_size_t isa_mem_base;
-
-#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO)
-#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits
-#endif
-
-/*
- *
- * Low level MMIO accessors
- *
- * This provides the non-bus specific accessors to MMIO. Those are PowerPC
- * specific and thus shouldn't be used in generic code. The accessors
- * provided here are:
- *
- * in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64
- * out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64
- * _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns
- *
- * Those operate directly on a kernel virtual address. Note that the prototype
- * for the out_* accessors has the arguments in opposite order from the usual
- * linux PCI accessors. Unlike those, they take the address first and the value
- * next.
- *
- * Note: I might drop the _ns suffix on the stream operations soon as it is
- * simply normal for stream operations to not swap in the first place.
- *
- */
-
-#ifdef CONFIG_PPC64
-#define IO_SET_SYNC_FLAG() do { local_paca->io_sync = 1; } while(0)
-#else
-#define IO_SET_SYNC_FLAG()
-#endif
-
-/* gcc 4.0 and older doesn't have 'Z' constraint */
-#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0)
-#define DEF_MMIO_IN_LE(name, size, insn) \
-static inline u##size name(const volatile u##size __iomem *addr) \
-{ \
- u##size ret; \
- __asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync" \
- : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \
- return ret; \
-}
-
-#define DEF_MMIO_OUT_LE(name, size, insn) \
-static inline void name(volatile u##size __iomem *addr, u##size val) \
-{ \
- __asm__ __volatile__("sync;"#insn" %1,0,%2" \
- : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \
- IO_SET_SYNC_FLAG(); \
-}
-#else /* newer gcc */
-#define DEF_MMIO_IN_LE(name, size, insn) \
-static inline u##size name(const volatile u##size __iomem *addr) \
-{ \
- u##size ret; \
- __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \
- : "=r" (ret) : "Z" (*addr) : "memory"); \
- return ret; \
-}
-
-#define DEF_MMIO_OUT_LE(name, size, insn) \
-static inline void name(volatile u##size __iomem *addr, u##size val) \
-{ \
- __asm__ __volatile__("sync;"#insn" %1,%y0" \
- : "=Z" (*addr) : "r" (val) : "memory"); \
- IO_SET_SYNC_FLAG(); \
-}
-#endif
-
-#define DEF_MMIO_IN_BE(name, size, insn) \
-static inline u##size name(const volatile u##size __iomem *addr) \
-{ \
- u##size ret; \
- __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
- : "=r" (ret) : "m" (*addr) : "memory"); \
- return ret; \
-}
-
-#define DEF_MMIO_OUT_BE(name, size, insn) \
-static inline void name(volatile u##size __iomem *addr, u##size val) \
-{ \
- __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \
- : "=m" (*addr) : "r" (val) : "memory"); \
- IO_SET_SYNC_FLAG(); \
-}
-
-
-DEF_MMIO_IN_BE(in_8, 8, lbz);
-DEF_MMIO_IN_BE(in_be16, 16, lhz);
-DEF_MMIO_IN_BE(in_be32, 32, lwz);
-DEF_MMIO_IN_LE(in_le16, 16, lhbrx);
-DEF_MMIO_IN_LE(in_le32, 32, lwbrx);
-
-DEF_MMIO_OUT_BE(out_8, 8, stb);
-DEF_MMIO_OUT_BE(out_be16, 16, sth);
-DEF_MMIO_OUT_BE(out_be32, 32, stw);
-DEF_MMIO_OUT_LE(out_le16, 16, sthbrx);
-DEF_MMIO_OUT_LE(out_le32, 32, stwbrx);
-
-#ifdef __powerpc64__
-DEF_MMIO_OUT_BE(out_be64, 64, std);
-DEF_MMIO_IN_BE(in_be64, 64, ld);
-
-/* There is no asm instructions for 64 bits reverse loads and stores */
-static inline u64 in_le64(const volatile u64 __iomem *addr)
-{
- return swab64(in_be64(addr));
-}
-
-static inline void out_le64(volatile u64 __iomem *addr, u64 val)
-{
- out_be64(addr, swab64(val));
-}
-#endif /* __powerpc64__ */
-
-/*
- * Low level IO stream instructions are defined out of line for now
- */
-extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
-extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
-extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count);
-extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count);
-extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count);
-extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count);
-
-/* The _ns naming is historical and will be removed. For now, just #define
- * the non _ns equivalent names
- */
-#define _insw _insw_ns
-#define _insl _insl_ns
-#define _outsw _outsw_ns
-#define _outsl _outsl_ns
-
-
-/*
- * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line
- */
-
-extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n);
-extern void _memcpy_fromio(void *dest, const volatile void __iomem *src,
- unsigned long n);
-extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
- unsigned long n);
-
-/*
- *
- * PCI and standard ISA accessors
- *
- * Those are globally defined linux accessors for devices on PCI or ISA
- * busses. They follow the Linux defined semantics. The current implementation
- * for PowerPC is as close as possible to the x86 version of these, and thus
- * provides fairly heavy weight barriers for the non-raw versions
- *
- * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO
- * allowing the platform to provide its own implementation of some or all
- * of the accessors.
- */
-
-/*
- * Include the EEH definitions when EEH is enabled only so they don't get
- * in the way when building for 32 bits
- */
-#ifdef CONFIG_EEH
-#include <asm/eeh.h>
-#endif
-
-/* Shortcut to the MMIO argument pointer */
-#define PCI_IO_ADDR volatile void __iomem *
-
-/* Indirect IO address tokens:
- *
- * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks
- * on all IOs. (Note that this is all 64 bits only for now)
- *
- * To help platforms who may need to differenciate MMIO addresses in
- * their hooks, a bitfield is reserved for use by the platform near the
- * top of MMIO addresses (not PIO, those have to cope the hard way).
- *
- * This bit field is 12 bits and is at the top of the IO virtual
- * addresses PCI_IO_INDIRECT_TOKEN_MASK.
- *
- * The kernel virtual space is thus:
- *
- * 0xD000000000000000 : vmalloc
- * 0xD000080000000000 : PCI PHB IO space
- * 0xD000080080000000 : ioremap
- * 0xD0000fffffffffff : end of ioremap region
- *
- * Since the top 4 bits are reserved as the region ID, we use thus
- * the next 12 bits and keep 4 bits available for the future if the
- * virtual address space is ever to be extended.
- *
- * The direct IO mapping operations will then mask off those bits
- * before doing the actual access, though that only happen when
- * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that
- * mechanism
- */
-
-#ifdef CONFIG_PPC_INDIRECT_IO
-#define PCI_IO_IND_TOKEN_MASK 0x0fff000000000000ul
-#define PCI_IO_IND_TOKEN_SHIFT 48
-#define PCI_FIX_ADDR(addr) \
- ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK))
-#define PCI_GET_ADDR_TOKEN(addr) \
- (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> \
- PCI_IO_IND_TOKEN_SHIFT)
-#define PCI_SET_ADDR_TOKEN(addr, token) \
-do { \
- unsigned long __a = (unsigned long)(addr); \
- __a &= ~PCI_IO_IND_TOKEN_MASK; \
- __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT; \
- (addr) = (void __iomem *)__a; \
-} while(0)
-#else
-#define PCI_FIX_ADDR(addr) (addr)
-#endif
-
-
-/*
- * Non ordered and non-swapping "raw" accessors
- */
-
-static inline unsigned char __raw_readb(const volatile void __iomem *addr)
-{
- return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr);
-}
-static inline unsigned short __raw_readw(const volatile void __iomem *addr)
-{
- return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr);
-}
-static inline unsigned int __raw_readl(const volatile void __iomem *addr)
-{
- return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr);
-}
-static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
-{
- *(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v;
-}
-static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
-{
- *(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v;
-}
-static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
-{
- *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
-}
-
-#ifdef __powerpc64__
-static inline unsigned long __raw_readq(const volatile void __iomem *addr)
-{
- return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr);
-}
-static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
-{
- *(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v;
-}
-#endif /* __powerpc64__ */
-
-/*
- *
- * PCI PIO and MMIO accessors.
- *
- *
- * On 32 bits, PIO operations have a recovery mechanism in case they trigger
- * machine checks (which they occasionally do when probing non existing
- * IO ports on some platforms, like PowerMac and 8xx).
- * I always found it to be of dubious reliability and I am tempted to get
- * rid of it one of these days. So if you think it's important to keep it,
- * please voice up asap. We never had it for 64 bits and I do not intend
- * to port it over
- */
-
-#ifdef CONFIG_PPC32
-
-#define __do_in_asm(name, op) \
-static inline unsigned int name(unsigned int port) \
-{ \
- unsigned int x; \
- __asm__ __volatile__( \
- "sync\n" \
- "0:" op " %0,0,%1\n" \
- "1: twi 0,%0,0\n" \
- "2: isync\n" \
- "3: nop\n" \
- "4:\n" \
- ".section .fixup,\"ax\"\n" \
- "5: li %0,-1\n" \
- " b 4b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 0b,5b\n" \
- " .long 1b,5b\n" \
- " .long 2b,5b\n" \
- " .long 3b,5b\n" \
- ".previous" \
- : "=&r" (x) \
- : "r" (port + _IO_BASE) \
- : "memory"); \
- return x; \
-}
-
-#define __do_out_asm(name, op) \
-static inline void name(unsigned int val, unsigned int port) \
-{ \
- __asm__ __volatile__( \
- "sync\n" \
- "0:" op " %0,0,%1\n" \
- "1: sync\n" \
- "2:\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 0b,2b\n" \
- " .long 1b,2b\n" \
- ".previous" \
- : : "r" (val), "r" (port + _IO_BASE) \
- : "memory"); \
-}
-
-__do_in_asm(_rec_inb, "lbzx")
-__do_in_asm(_rec_inw, "lhbrx")
-__do_in_asm(_rec_inl, "lwbrx")
-__do_out_asm(_rec_outb, "stbx")
-__do_out_asm(_rec_outw, "sthbrx")
-__do_out_asm(_rec_outl, "stwbrx")
-
-#endif /* CONFIG_PPC32 */
-
-/* The "__do_*" operations below provide the actual "base" implementation
- * for each of the defined acccessor. Some of them use the out_* functions
- * directly, some of them still use EEH, though we might change that in the
- * future. Those macros below provide the necessary argument swapping and
- * handling of the IO base for PIO.
- *
- * They are themselves used by the macros that define the actual accessors
- * and can be used by the hooks if any.
- *
- * Note that PIO operations are always defined in terms of their corresonding
- * MMIO operations. That allows platforms like iSeries who want to modify the
- * behaviour of both to only hook on the MMIO version and get both. It's also
- * possible to hook directly at the toplevel PIO operation if they have to
- * be handled differently
- */
-#define __do_writeb(val, addr) out_8(PCI_FIX_ADDR(addr), val)
-#define __do_writew(val, addr) out_le16(PCI_FIX_ADDR(addr), val)
-#define __do_writel(val, addr) out_le32(PCI_FIX_ADDR(addr), val)
-#define __do_writeq(val, addr) out_le64(PCI_FIX_ADDR(addr), val)
-#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val)
-#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val)
-#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val)
-
-#ifdef CONFIG_EEH
-#define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr))
-#define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr))
-#define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr))
-#define __do_readq(addr) eeh_readq(PCI_FIX_ADDR(addr))
-#define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr))
-#define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr))
-#define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr))
-#else /* CONFIG_EEH */
-#define __do_readb(addr) in_8(PCI_FIX_ADDR(addr))
-#define __do_readw(addr) in_le16(PCI_FIX_ADDR(addr))
-#define __do_readl(addr) in_le32(PCI_FIX_ADDR(addr))
-#define __do_readq(addr) in_le64(PCI_FIX_ADDR(addr))
-#define __do_readw_be(addr) in_be16(PCI_FIX_ADDR(addr))
-#define __do_readl_be(addr) in_be32(PCI_FIX_ADDR(addr))
-#define __do_readq_be(addr) in_be64(PCI_FIX_ADDR(addr))
-#endif /* !defined(CONFIG_EEH) */
-
-#ifdef CONFIG_PPC32
-#define __do_outb(val, port) _rec_outb(val, port)
-#define __do_outw(val, port) _rec_outw(val, port)
-#define __do_outl(val, port) _rec_outl(val, port)
-#define __do_inb(port) _rec_inb(port)
-#define __do_inw(port) _rec_inw(port)
-#define __do_inl(port) _rec_inl(port)
-#else /* CONFIG_PPC32 */
-#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)_IO_BASE+port);
-#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)_IO_BASE+port);
-#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)_IO_BASE+port);
-#define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port);
-#define __do_inw(port) readw((PCI_IO_ADDR)_IO_BASE + port);
-#define __do_inl(port) readl((PCI_IO_ADDR)_IO_BASE + port);
-#endif /* !CONFIG_PPC32 */
-
-#ifdef CONFIG_EEH
-#define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n))
-#define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n))
-#define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n))
-#else /* CONFIG_EEH */
-#define __do_readsb(a, b, n) _insb(PCI_FIX_ADDR(a), (b), (n))
-#define __do_readsw(a, b, n) _insw(PCI_FIX_ADDR(a), (b), (n))
-#define __do_readsl(a, b, n) _insl(PCI_FIX_ADDR(a), (b), (n))
-#endif /* !CONFIG_EEH */
-#define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n))
-#define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n))
-#define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n))
-
-#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
-#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
-#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
-#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
-#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
-#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
-
-#define __do_memset_io(addr, c, n) \
- _memset_io(PCI_FIX_ADDR(addr), c, n)
-#define __do_memcpy_toio(dst, src, n) \
- _memcpy_toio(PCI_FIX_ADDR(dst), src, n)
-
-#ifdef CONFIG_EEH
-#define __do_memcpy_fromio(dst, src, n) \
- eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n)
-#else /* CONFIG_EEH */
-#define __do_memcpy_fromio(dst, src, n) \
- _memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
-#endif /* !CONFIG_EEH */
-
-#ifdef CONFIG_PPC_INDIRECT_IO
-#define DEF_PCI_HOOK(x) x
-#else
-#define DEF_PCI_HOOK(x) NULL
-#endif
-
-/* Structure containing all the hooks */
-extern struct ppc_pci_io {
-
-#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) ret (*name) at;
-#define DEF_PCI_AC_NORET(name, at, al, space, aa) void (*name) at;
-
-#include <asm/io-defs.h>
-
-#undef DEF_PCI_AC_RET
-#undef DEF_PCI_AC_NORET
-
-} ppc_pci_io;
-
-/* The inline wrappers */
-#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \
-static inline ret name at \
-{ \
- if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \
- return ppc_pci_io.name al; \
- return __do_##name al; \
-}
-
-#define DEF_PCI_AC_NORET(name, at, al, space, aa) \
-static inline void name at \
-{ \
- if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \
- ppc_pci_io.name al; \
- else \
- __do_##name al; \
-}
-
-#include <asm/io-defs.h>
-
-#undef DEF_PCI_AC_RET
-#undef DEF_PCI_AC_NORET
-
-/* Some drivers check for the presence of readq & writeq with
- * a #ifdef, so we make them happy here.
- */
-#ifdef __powerpc64__
-#define readq readq
-#define writeq writeq
-#endif
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-/*
- * We don't do relaxed operations yet, at least not with this semantic
- */
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-#define readq_relaxed(addr) readq(addr)
-
-#ifdef CONFIG_PPC32
-#define mmiowb()
-#else
-/*
- * Enforce synchronisation of stores vs. spin_unlock
- * (this does it explicitly, though our implementation of spin_unlock
- * does it implicitely too)
- */
-static inline void mmiowb(void)
-{
- unsigned long tmp;
-
- __asm__ __volatile__("sync; li %0,0; stb %0,%1(13)"
- : "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync))
- : "memory");
-}
-#endif /* !CONFIG_PPC32 */
-
-static inline void iosync(void)
-{
- __asm__ __volatile__ ("sync" : : : "memory");
-}
-
-/* Enforce in-order execution of data I/O.
- * No distinction between read/write on PPC; use eieio for all three.
- * Those are fairly week though. They don't provide a barrier between
- * MMIO and cacheable storage nor do they provide a barrier vs. locks,
- * they only provide barriers between 2 __raw MMIO operations and
- * possibly break write combining.
- */
-#define iobarrier_rw() eieio()
-#define iobarrier_r() eieio()
-#define iobarrier_w() eieio()
-
-
-/*
- * output pause versions need a delay at least for the
- * w83c105 ide controller in a p610.
- */
-#define inb_p(port) inb(port)
-#define outb_p(val, port) (udelay(1), outb((val), (port)))
-#define inw_p(port) inw(port)
-#define outw_p(val, port) (udelay(1), outw((val), (port)))
-#define inl_p(port) inl(port)
-#define outl_p(val, port) (udelay(1), outl((val), (port)))
-
-
-#define IO_SPACE_LIMIT ~(0UL)
-
-
-/**
- * ioremap - map bus memory into CPU space
- * @address: bus address of the memory
- * @size: size of the resource to map
- *
- * ioremap performs a platform specific sequence of operations to
- * make bus memory CPU accessible via the readb/readw/readl/writeb/
- * writew/writel functions and the other mmio helpers. The returned
- * address is not guaranteed to be usable directly as a virtual
- * address.
- *
- * We provide a few variations of it:
- *
- * * ioremap is the standard one and provides non-cacheable guarded mappings
- * and can be hooked by the platform via ppc_md
- *
- * * ioremap_flags allows to specify the page flags as an argument and can
- * also be hooked by the platform via ppc_md. ioremap_prot is the exact
- * same thing as ioremap_flags.
- *
- * * ioremap_nocache is identical to ioremap
- *
- * * iounmap undoes such a mapping and can be hooked
- *
- * * __ioremap_at (and the pending __iounmap_at) are low level functions to
- * create hand-made mappings for use only by the PCI code and cannot
- * currently be hooked. Must be page aligned.
- *
- * * __ioremap is the low level implementation used by ioremap and
- * ioremap_flags and cannot be hooked (but can be used by a hook on one
- * of the previous ones)
- *
- * * __iounmap, is the low level implementation used by iounmap and cannot
- * be hooked (but can be used by a hook on iounmap)
- *
- */
-extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
- unsigned long flags);
-#define ioremap_nocache(addr, size) ioremap((addr), (size))
-#define ioremap_prot(addr, size, prot) ioremap_flags((addr), (size), (prot))
-
-extern void iounmap(volatile void __iomem *addr);
-
-extern void __iomem *__ioremap(phys_addr_t, unsigned long size,
- unsigned long flags);
-extern void __iounmap(volatile void __iomem *addr);
-
-extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea,
- unsigned long size, unsigned long flags);
-extern void __iounmap_at(void *ea, unsigned long size);
-
-/*
- * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation
- * which needs some additional definitions here. They basically allow PIO
- * space overall to be 1GB. This will work as long as we never try to use
- * iomap to map MMIO below 1GB which should be fine on ppc64
- */
-#define HAVE_ARCH_PIO_SIZE 1
-#define PIO_OFFSET 0x00000000UL
-#define PIO_MASK (FULL_IO_SIZE - 1)
-#define PIO_RESERVED (FULL_IO_SIZE)
-
-#define mmio_read16be(addr) readw_be(addr)
-#define mmio_read32be(addr) readl_be(addr)
-#define mmio_write16be(val, addr) writew_be(val, addr)
-#define mmio_write32be(val, addr) writel_be(val, addr)
-#define mmio_insb(addr, dst, count) readsb(addr, dst, count)
-#define mmio_insw(addr, dst, count) readsw(addr, dst, count)
-#define mmio_insl(addr, dst, count) readsl(addr, dst, count)
-#define mmio_outsb(addr, src, count) writesb(addr, src, count)
-#define mmio_outsw(addr, src, count) writesw(addr, src, count)
-#define mmio_outsl(addr, src, count) writesl(addr, src, count)
-
-/**
- * virt_to_phys - map virtual addresses to physical
- * @address: address to remap
- *
- * The returned physical address is the physical (CPU) mapping for
- * the memory address given. It is only valid to use this function on
- * addresses directly mapped or allocated via kmalloc.
- *
- * This function does not give bus mappings for DMA transfers. In
- * almost all conceivable cases a device driver should not be using
- * this function
- */
-static inline unsigned long virt_to_phys(volatile void * address)
-{
- return __pa((unsigned long)address);
-}
-
-/**
- * phys_to_virt - map physical address to virtual
- * @address: address to remap
- *
- * The returned virtual address is a current CPU mapping for
- * the memory address given. It is only valid to use this function on
- * addresses that have a kernel mapping
- *
- * This function does not handle bus mappings for DMA transfers. In
- * almost all conceivable cases a device driver should not be using
- * this function
- */
-static inline void * phys_to_virt(unsigned long address)
-{
- return (void *)__va(address);
-}
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-
-/* We do NOT want virtual merging, it would put too much pressure on
- * our iommu allocator. Instead, we want drivers to be smart enough
- * to coalesce sglists that happen to have been mapped in a contiguous
- * way by the iommu
- */
-#define BIO_VMERGE_BOUNDARY 0
-
-/*
- * 32 bits still uses virt_to_bus() for it's implementation of DMA
- * mappings se we have to keep it defined here. We also have some old
- * drivers (shame shame shame) that use bus_to_virt() and haven't been
- * fixed yet so I need to define it here.
- */
-#ifdef CONFIG_PPC32
-
-static inline unsigned long virt_to_bus(volatile void * address)
-{
- if (address == NULL)
- return 0;
- return __pa(address) + PCI_DRAM_OFFSET;
-}
-
-static inline void * bus_to_virt(unsigned long address)
-{
- if (address == 0)
- return NULL;
- return __va(address - PCI_DRAM_OFFSET);
-}
-
-#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET)
-
-#endif /* CONFIG_PPC32 */
-
-/* access ports */
-#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v))
-#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
-
-#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v))
-#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
-
-#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v))
-#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
-
-/* Clear and set bits in one shot. These macros can be used to clear and
- * set multiple bits in a register using a single read-modify-write. These
- * macros can also be used to set a multiple-bit bit pattern using a mask,
- * by specifying the mask in the 'clear' parameter and the new bit pattern
- * in the 'set' parameter.
- */
-
-#define clrsetbits(type, addr, clear, set) \
- out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
-
-#ifdef __powerpc64__
-#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
-#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
-#endif
-
-#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
-#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
-
-#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
-#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
-
-#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
-
-void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
- size_t size, unsigned long flags);
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_IO_H */