diff options
Diffstat (limited to 'include/asm-powerpc/reg_booke.h')
| -rw-r--r-- | include/asm-powerpc/reg_booke.h | 74 |
1 files changed, 74 insertions, 0 deletions
diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h index cf54a3f31753..be980f4ee495 100644 --- a/include/asm-powerpc/reg_booke.h +++ b/include/asm-powerpc/reg_booke.h @@ -61,6 +61,8 @@ #define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */ #define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ #define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ +#define SPRN_L1CFG0 0x203 /* L1 Cache Configure Register 0 */ +#define SPRN_L1CFG1 0x204 /* L1 Cache Configure Register 1 */ #define SPRN_ATB 0x20E /* Alternate Time Base */ #define SPRN_ATBL 0x20E /* Alternate Time Base Lower */ #define SPRN_ATBU 0x20F /* Alternate Time Base Upper */ @@ -78,6 +80,7 @@ #define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */ #define SPRN_SPRG8 0x25C /* Special Purpose Register General 8 */ #define SPRN_SPRG9 0x25D /* Special Purpose Register General 9 */ +#define SPRN_L1CSR2 0x25E /* L1 Cache Control and Status Register 2 */ #define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ #define SPRN_MAS1 0x271 /* MMU Assist Register 1 */ #define SPRN_MAS2 0x272 /* MMU Assist Register 2 */ @@ -108,6 +111,8 @@ #define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */ #define SPRN_PIT 0x3DB /* Programmable Interval Timer */ #define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */ +#define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */ +#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */ #define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ #define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ #define SPRN_SVR 0x3FF /* System Version Register */ @@ -210,6 +215,7 @@ #ifdef CONFIG_BOOKE #define DBSR_IC 0x08000000 /* Instruction Completion */ #define DBSR_BT 0x04000000 /* Branch Taken */ +#define DBSR_IRPT 0x02000000 /* Exception Debug Event */ #define DBSR_TIE 0x01000000 /* Trap Instruction Event */ #define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */ #define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */ @@ -219,10 +225,14 @@ #define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */ #define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */ #define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */ +#define DBSR_RET 0x00008000 /* Return Debug Event */ +#define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ +#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */ #endif #ifdef CONFIG_40x #define DBSR_IC 0x80000000 /* Instruction Completion */ #define DBSR_BT 0x40000000 /* Branch taken */ +#define DBSR_IRPT 0x20000000 /* Exception Debug Event */ #define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ #define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */ #define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */ @@ -253,6 +263,7 @@ #define ESR_BO 0x00020000 /* Byte Ordering */ /* Bit definitions related to the DBCR0. */ +#if defined(CONFIG_40x) #define DBCR0_EDM 0x80000000 /* External Debug Mode */ #define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ #define DBCR0_RST 0x30000000 /* all the bits in the RST field */ @@ -261,20 +272,69 @@ #define DBCR0_RST_CORE 0x10000000 /* Core Reset */ #define DBCR0_RST_NONE 0x00000000 /* No Reset */ #define DBCR0_IC 0x08000000 /* Instruction Completion */ +#define DBCR0_ICMP DBCR0_IC #define DBCR0_BT 0x04000000 /* Branch Taken */ +#define DBCR0_BRT DBCR0_BT #define DBCR0_EDE 0x02000000 /* Exception Debug Event */ +#define DBCR0_IRPT DBCR0_EDE #define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ #define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IAC1 DBCR0_IA1 #define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IAC2 DBCR0_IA2 #define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */ #define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */ #define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */ +#define DBCR0_IAC3 DBCR0_IA3 #define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */ +#define DBCR0_IAC4 DBCR0_IA4 #define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */ #define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */ #define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ #define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ +#elif defined(CONFIG_BOOKE) +#define DBCR0_EDM 0x80000000 /* External Debug Mode */ +#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ +#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ +/* DBCR0_RST_* is 44x specific and not followed in fsl booke */ +#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ +#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ +#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ +#define DBCR0_RST_NONE 0x00000000 /* No Reset */ +#define DBCR0_ICMP 0x08000000 /* Instruction Completion */ +#define DBCR0_IC DBCR0_ICMP +#define DBCR0_BRT 0x04000000 /* Branch Taken */ +#define DBCR0_BT DBCR0_BRT +#define DBCR0_IRPT 0x02000000 /* Exception Debug Event */ +#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ +#define DBCR0_TIE DBCR0_TDE +#define DBCR0_IAC1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IAC2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IAC3 0x00200000 /* Instr Addr compare 3 enable */ +#define DBCR0_IAC4 0x00100000 /* Instr Addr compare 4 enable */ +#define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */ +#define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */ +#define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */ +#define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */ +#define DBCR0_RET 0x00008000 /* Return Debug Event */ +#define DBCR0_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ +#define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ +#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ + +/* Bit definitions related to the DBCR1. */ +#define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */ +#define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */ +#define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */ +#define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */ +#define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ +#define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ + +/* Bit definitions related to the DBCR2. */ +#define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */ +#define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */ +#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */ +#endif /* Bit definitions related to the TCR. */ #define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ @@ -336,6 +396,20 @@ #define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */ #define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */ +/* Bit definitions for L2CSR0. */ +#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ +#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ +#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */ +#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */ +#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */ +#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */ +#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */ +#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */ +#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */ +#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */ +#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ +#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ + /* Bit definitions for SGR. */ #define SGR_NORMAL 0 /* Speculative fetching allowed. */ #define SGR_GUARDED 1 /* Speculative fetching disallowed. */ |