summaryrefslogtreecommitdiff
path: root/include/asm-x86/debugreg.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-x86/debugreg.h')
-rw-r--r--include/asm-x86/debugreg.h70
1 files changed, 0 insertions, 70 deletions
diff --git a/include/asm-x86/debugreg.h b/include/asm-x86/debugreg.h
deleted file mode 100644
index ecb6907c3ea4..000000000000
--- a/include/asm-x86/debugreg.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef ASM_X86__DEBUGREG_H
-#define ASM_X86__DEBUGREG_H
-
-
-/* Indicate the register numbers for a number of the specific
- debug registers. Registers 0-3 contain the addresses we wish to trap on */
-#define DR_FIRSTADDR 0 /* u_debugreg[DR_FIRSTADDR] */
-#define DR_LASTADDR 3 /* u_debugreg[DR_LASTADDR] */
-
-#define DR_STATUS 6 /* u_debugreg[DR_STATUS] */
-#define DR_CONTROL 7 /* u_debugreg[DR_CONTROL] */
-
-/* Define a few things for the status register. We can use this to determine
- which debugging register was responsible for the trap. The other bits
- are either reserved or not of interest to us. */
-
-#define DR_TRAP0 (0x1) /* db0 */
-#define DR_TRAP1 (0x2) /* db1 */
-#define DR_TRAP2 (0x4) /* db2 */
-#define DR_TRAP3 (0x8) /* db3 */
-
-#define DR_STEP (0x4000) /* single-step */
-#define DR_SWITCH (0x8000) /* task switch */
-
-/* Now define a bunch of things for manipulating the control register.
- The top two bytes of the control register consist of 4 fields of 4
- bits - each field corresponds to one of the four debug registers,
- and indicates what types of access we trap on, and how large the data
- field is that we are looking at */
-
-#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */
-#define DR_CONTROL_SIZE 4 /* 4 control bits per register */
-
-#define DR_RW_EXECUTE (0x0) /* Settings for the access types to trap on */
-#define DR_RW_WRITE (0x1)
-#define DR_RW_READ (0x3)
-
-#define DR_LEN_1 (0x0) /* Settings for data length to trap on */
-#define DR_LEN_2 (0x4)
-#define DR_LEN_4 (0xC)
-#define DR_LEN_8 (0x8)
-
-/* The low byte to the control register determine which registers are
- enabled. There are 4 fields of two bits. One bit is "local", meaning
- that the processor will reset the bit after a task switch and the other
- is global meaning that we have to explicitly reset the bit. With linux,
- you can use either one, since we explicitly zero the register when we enter
- kernel mode. */
-
-#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit */
-#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit */
-#define DR_ENABLE_SIZE 2 /* 2 enable bits per register */
-
-#define DR_LOCAL_ENABLE_MASK (0x55) /* Set local bits for all 4 regs */
-#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */
-
-/* The second byte to the control register has a few special things.
- We can slow the instruction pipeline for instructions coming via the
- gdt or the ldt if we want to. I am not sure why this is an advantage */
-
-#ifdef __i386__
-#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */
-#else
-#define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) /* Reserved */
-#endif
-
-#define DR_LOCAL_SLOWDOWN (0x100) /* Local slow the pipeline */
-#define DR_GLOBAL_SLOWDOWN (0x200) /* Global slow the pipeline */
-
-#endif /* ASM_X86__DEBUGREG_H */