summaryrefslogtreecommitdiff
path: root/include/linux/amba
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/amba')
-rw-r--r--include/linux/amba/bus.h8
-rw-r--r--include/linux/amba/clcd.h90
-rw-r--r--include/linux/amba/mmci.h17
3 files changed, 92 insertions, 23 deletions
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 9e7f259346e1..fcbbe71a3cc1 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -43,12 +43,12 @@ struct amba_id {
struct amba_driver {
struct device_driver drv;
- int (*probe)(struct amba_device *, struct amba_id *);
+ int (*probe)(struct amba_device *, const struct amba_id *);
int (*remove)(struct amba_device *);
void (*shutdown)(struct amba_device *);
int (*suspend)(struct amba_device *, pm_message_t);
int (*resume)(struct amba_device *);
- struct amba_id *id_table;
+ const struct amba_id *id_table;
};
enum amba_vendor {
@@ -56,6 +56,10 @@ enum amba_vendor {
AMBA_VENDOR_ST = 0x80,
};
+extern struct bus_type amba_bustype;
+
+#define to_amba_device(d) container_of(d, struct amba_device, dev)
+
#define amba_get_drvdata(d) dev_get_drvdata(&d->dev)
#define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p)
diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h
index be33b3affc8a..24d26efd1432 100644
--- a/include/linux/amba/clcd.h
+++ b/include/linux/amba/clcd.h
@@ -53,6 +53,7 @@
#define CNTL_LCDBPP8 (3 << 1)
#define CNTL_LCDBPP16 (4 << 1)
#define CNTL_LCDBPP16_565 (6 << 1)
+#define CNTL_LCDBPP16_444 (7 << 1)
#define CNTL_LCDBPP24 (5 << 1)
#define CNTL_LCDBW (1 << 4)
#define CNTL_LCDTFT (1 << 5)
@@ -66,6 +67,32 @@
#define CNTL_LDMAFIFOTIME (1 << 15)
#define CNTL_WATERMARK (1 << 16)
+enum {
+ /* individual formats */
+ CLCD_CAP_RGB444 = (1 << 0),
+ CLCD_CAP_RGB5551 = (1 << 1),
+ CLCD_CAP_RGB565 = (1 << 2),
+ CLCD_CAP_RGB888 = (1 << 3),
+ CLCD_CAP_BGR444 = (1 << 4),
+ CLCD_CAP_BGR5551 = (1 << 5),
+ CLCD_CAP_BGR565 = (1 << 6),
+ CLCD_CAP_BGR888 = (1 << 7),
+
+ /* connection layouts */
+ CLCD_CAP_444 = CLCD_CAP_RGB444 | CLCD_CAP_BGR444,
+ CLCD_CAP_5551 = CLCD_CAP_RGB5551 | CLCD_CAP_BGR5551,
+ CLCD_CAP_565 = CLCD_CAP_RGB565 | CLCD_CAP_BGR565,
+ CLCD_CAP_888 = CLCD_CAP_RGB888 | CLCD_CAP_BGR888,
+
+ /* red/blue ordering */
+ CLCD_CAP_RGB = CLCD_CAP_RGB444 | CLCD_CAP_RGB5551 |
+ CLCD_CAP_RGB565 | CLCD_CAP_RGB888,
+ CLCD_CAP_BGR = CLCD_CAP_BGR444 | CLCD_CAP_BGR5551 |
+ CLCD_CAP_BGR565 | CLCD_CAP_BGR888,
+
+ CLCD_CAP_ALL = CLCD_CAP_BGR | CLCD_CAP_RGB,
+};
+
struct clcd_panel {
struct fb_videomode mode;
signed short width; /* width in mm */
@@ -73,6 +100,7 @@ struct clcd_panel {
u32 tim2;
u32 tim3;
u32 cntl;
+ u32 caps;
unsigned int bpp:8,
fixedtimings:1,
grayscale:1;
@@ -97,6 +125,11 @@ struct clcd_board {
const char *name;
/*
+ * Optional. Hardware capability flags.
+ */
+ u32 caps;
+
+ /*
* Optional. Check whether the var structure is acceptable
* for this display.
*/
@@ -155,34 +188,35 @@ struct clcd_fb {
static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
{
+ struct fb_var_screeninfo *var = &fb->fb.var;
u32 val, cpl;
/*
* Program the CLCD controller registers and start the CLCD
*/
- val = ((fb->fb.var.xres / 16) - 1) << 2;
- val |= (fb->fb.var.hsync_len - 1) << 8;
- val |= (fb->fb.var.right_margin - 1) << 16;
- val |= (fb->fb.var.left_margin - 1) << 24;
+ val = ((var->xres / 16) - 1) << 2;
+ val |= (var->hsync_len - 1) << 8;
+ val |= (var->right_margin - 1) << 16;
+ val |= (var->left_margin - 1) << 24;
regs->tim0 = val;
- val = fb->fb.var.yres;
+ val = var->yres;
if (fb->panel->cntl & CNTL_LCDDUAL)
val /= 2;
val -= 1;
- val |= (fb->fb.var.vsync_len - 1) << 10;
- val |= fb->fb.var.lower_margin << 16;
- val |= fb->fb.var.upper_margin << 24;
+ val |= (var->vsync_len - 1) << 10;
+ val |= var->lower_margin << 16;
+ val |= var->upper_margin << 24;
regs->tim1 = val;
val = fb->panel->tim2;
- val |= fb->fb.var.sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS;
- val |= fb->fb.var.sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
+ val |= var->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS;
+ val |= var->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
- cpl = fb->fb.var.xres_virtual;
+ cpl = var->xres_virtual;
if (fb->panel->cntl & CNTL_LCDTFT) /* TFT */
/* / 1 */;
- else if (!fb->fb.var.grayscale) /* STN color */
+ else if (!var->grayscale) /* STN color */
cpl = cpl * 8 / 3;
else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */
cpl /= 8;
@@ -194,10 +228,22 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
regs->tim3 = fb->panel->tim3;
val = fb->panel->cntl;
- if (fb->fb.var.grayscale)
+ if (var->grayscale)
val |= CNTL_LCDBW;
- switch (fb->fb.var.bits_per_pixel) {
+ if (fb->panel->caps && fb->board->caps &&
+ var->bits_per_pixel >= 16) {
+ /*
+ * if board and panel supply capabilities, we can support
+ * changing BGR/RGB depending on supplied parameters
+ */
+ if (var->red.offset == 0)
+ val &= ~CNTL_BGR;
+ else
+ val |= CNTL_BGR;
+ }
+
+ switch (var->bits_per_pixel) {
case 1:
val |= CNTL_LCDBPP1;
break;
@@ -212,15 +258,17 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
break;
case 16:
/*
- * PL110 cannot choose between 5551 and 565 modes in
- * its control register
+ * PL110 cannot choose between 5551 and 565 modes in its
+ * control register. It is possible to use 565 with
+ * custom external wiring.
*/
- if ((fb->dev->periphid & 0x000fffff) == 0x00041110)
+ if (amba_part(fb->dev) == 0x110 ||
+ var->green.length == 5)
val |= CNTL_LCDBPP16;
- else if (fb->fb.var.green.length == 5)
- val |= CNTL_LCDBPP16;
- else
+ else if (var->green.length == 6)
val |= CNTL_LCDBPP16_565;
+ else
+ val |= CNTL_LCDBPP16_444;
break;
case 32:
val |= CNTL_LCDBPP24;
@@ -228,7 +276,7 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
}
regs->cntl = val;
- regs->pixclock = fb->fb.var.pixclock;
+ regs->pixclock = var->pixclock;
}
static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index f4ee9acc9721..f60227088b7b 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -6,6 +6,9 @@
#include <linux/mmc/host.h>
+/* Just some dummy forwarding */
+struct dma_chan;
+
/**
* struct mmci_platform_data - platform configuration for the MMCI
* (also known as PL180) block.
@@ -27,6 +30,17 @@
* @cd_invert: true if the gpio_cd pin value is active low
* @capabilities: the capabilities of the block as implemented in
* this platform, signify anything MMC_CAP_* from mmc/host.h
+ * @dma_filter: function used to select an apropriate RX and TX
+ * DMA channel to be used for DMA, if and only if you're deploying the
+ * generic DMA engine
+ * @dma_rx_param: parameter passed to the DMA allocation
+ * filter in order to select an apropriate RX channel. If
+ * there is a bidirectional RX+TX channel, then just specify
+ * this and leave dma_tx_param set to NULL
+ * @dma_tx_param: parameter passed to the DMA allocation
+ * filter in order to select an apropriate TX channel. If this
+ * is NULL the driver will attempt to use the RX channel as a
+ * bidirectional channel
*/
struct mmci_platform_data {
unsigned int f_max;
@@ -38,6 +52,9 @@ struct mmci_platform_data {
int gpio_cd;
bool cd_invert;
unsigned long capabilities;
+ bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+ void *dma_rx_param;
+ void *dma_tx_param;
};
#endif
generated by cgit v1.2.3 (git 2.0.4) at 2025-02-10 18:16:07 +0000