diff options
Diffstat (limited to 'include/linux/cyclades.h')
| -rw-r--r-- | include/linux/cyclades.h | 426 |
1 files changed, 1 insertions, 425 deletions
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h index a5049eaf782d..19ae518f5471 100644 --- a/include/linux/cyclades.h +++ b/include/linux/cyclades.h @@ -63,434 +63,11 @@ * * */ - #ifndef _LINUX_CYCLADES_H #define _LINUX_CYCLADES_H -#include <linux/types.h> - -struct cyclades_monitor { - unsigned long int_count; - unsigned long char_count; - unsigned long char_max; - unsigned long char_last; -}; - -/* - * These stats all reflect activity since the device was last initialized. - * (i.e., since the port was opened with no other processes already having it - * open) - */ -struct cyclades_idle_stats { - __kernel_time_t in_use; /* Time device has been in use (secs) */ - __kernel_time_t recv_idle; /* Time since last char received (secs) */ - __kernel_time_t xmit_idle; /* Time since last char transmitted (secs) */ - unsigned long recv_bytes; /* Bytes received */ - unsigned long xmit_bytes; /* Bytes transmitted */ - unsigned long overruns; /* Input overruns */ - unsigned long frame_errs; /* Input framing errors */ - unsigned long parity_errs; /* Input parity errors */ -}; - -#define CYCLADES_MAGIC 0x4359 - -#define CYGETMON 0x435901 -#define CYGETTHRESH 0x435902 -#define CYSETTHRESH 0x435903 -#define CYGETDEFTHRESH 0x435904 -#define CYSETDEFTHRESH 0x435905 -#define CYGETTIMEOUT 0x435906 -#define CYSETTIMEOUT 0x435907 -#define CYGETDEFTIMEOUT 0x435908 -#define CYSETDEFTIMEOUT 0x435909 -#define CYSETRFLOW 0x43590a -#define CYGETRFLOW 0x43590b -#define CYSETRTSDTR_INV 0x43590c -#define CYGETRTSDTR_INV 0x43590d -#define CYZSETPOLLCYCLE 0x43590e -#define CYZGETPOLLCYCLE 0x43590f -#define CYGETCD1400VER 0x435910 -#define CYSETWAIT 0x435912 -#define CYGETWAIT 0x435913 - -/*************** CYCLOM-Z ADDITIONS ***************/ - -#define CZIOC ('M' << 8) -#define CZ_NBOARDS (CZIOC|0xfa) -#define CZ_BOOT_START (CZIOC|0xfb) -#define CZ_BOOT_DATA (CZIOC|0xfc) -#define CZ_BOOT_END (CZIOC|0xfd) -#define CZ_TEST (CZIOC|0xfe) - -#define CZ_DEF_POLL (HZ/25) - -#define MAX_BOARD 4 /* Max number of boards */ -#define MAX_DEV 256 /* Max number of ports total */ -#define CYZ_MAX_SPEED 921600 - -#define CYZ_FIFO_SIZE 16 - -#define CYZ_BOOT_NWORDS 0x100 -struct CYZ_BOOT_CTRL { - unsigned short nboard; - int status[MAX_BOARD]; - int nchannel[MAX_BOARD]; - int fw_rev[MAX_BOARD]; - unsigned long offset; - unsigned long data[CYZ_BOOT_NWORDS]; -}; - - -#ifndef DP_WINDOW_SIZE -/* - * Memory Window Sizes - */ - -#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */ -#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and - 8Zo V.2 */ -#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */ - -/* - * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver - * normally will access only interested on the fpga_id, fpga_version, - * start_cpu and stop_cpu. - */ - -struct CUSTOM_REG { - __u32 fpga_id; /* FPGA Identification Register */ - __u32 fpga_version; /* FPGA Version Number Register */ - __u32 cpu_start; /* CPU start Register (write) */ - __u32 cpu_stop; /* CPU stop Register (write) */ - __u32 misc_reg; /* Miscellaneous Register */ - __u32 idt_mode; /* IDT mode Register */ - __u32 uart_irq_status; /* UART IRQ status Register */ - __u32 clear_timer0_irq; /* Clear timer interrupt Register */ - __u32 clear_timer1_irq; /* Clear timer interrupt Register */ - __u32 clear_timer2_irq; /* Clear timer interrupt Register */ - __u32 test_register; /* Test Register */ - __u32 test_count; /* Test Count Register */ - __u32 timer_select; /* Timer select register */ - __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ - __u32 ram_wait_state; /* RAM wait-state Register */ - __u32 uart_wait_state; /* UART wait-state Register */ - __u32 timer_wait_state; /* timer wait-state Register */ - __u32 ack_wait_state; /* ACK wait State Register */ -}; - -/* - * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime - * registers. This structure can be used to access the 9060 registers - * (memory mapped). - */ - -struct RUNTIME_9060 { - __u32 loc_addr_range; /* 00h - Local Address Range */ - __u32 loc_addr_base; /* 04h - Local Address Base */ - __u32 loc_arbitr; /* 08h - Local Arbitration */ - __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */ - __u32 loc_rom_range; /* 10h - Local ROM Range */ - __u32 loc_rom_base; /* 14h - Local ROM Base */ - __u32 loc_bus_descr; /* 18h - Local Bus descriptor */ - __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */ - __u32 loc_base_mst; /* 20h - Local Base for Master PCI */ - __u32 loc_range_io; /* 24h - Local Range for Master IO */ - __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */ - __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */ - __u32 filler1; /* 30h */ - __u32 filler2; /* 34h */ - __u32 filler3; /* 38h */ - __u32 filler4; /* 3Ch */ - __u32 mail_box_0; /* 40h - Mail Box 0 */ - __u32 mail_box_1; /* 44h - Mail Box 1 */ - __u32 mail_box_2; /* 48h - Mail Box 2 */ - __u32 mail_box_3; /* 4Ch - Mail Box 3 */ - __u32 filler5; /* 50h */ - __u32 filler6; /* 54h */ - __u32 filler7; /* 58h */ - __u32 filler8; /* 5Ch */ - __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */ - __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */ - __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */ - __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ -}; - -/* Values for the Local Base Address re-map register */ - -#define WIN_RAM 0x00000001L /* set the sliding window to RAM */ -#define WIN_CREG 0x14000001L /* set the window to custom Registers */ - -/* Values timer select registers */ - -#define TIMER_BY_1M 0x00 /* clock divided by 1M */ -#define TIMER_BY_256K 0x01 /* clock divided by 256k */ -#define TIMER_BY_128K 0x02 /* clock divided by 128k */ -#define TIMER_BY_32K 0x03 /* clock divided by 32k */ - -/****************** ****************** *******************/ -#endif - -#ifndef ZFIRM_ID -/* #include "zfwint.h" */ -/****************** ****************** *******************/ -/* - * This file contains the definitions for interfacing with the - * Cyclom-Z ZFIRM Firmware. - */ - -/* General Constant definitions */ - -#define MAX_CHAN 64 /* max number of channels per board */ - -/* firmware id structure (set after boot) */ - -#define ID_ADDRESS 0x00000180L /* signature/pointer address */ -#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */ -#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */ -#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */ - -#define ZF_TINACT_DEF 1000 /* default inactivity timeout - (1000 ms) */ -#define ZF_TINACT ZF_TINACT_DEF - -struct FIRM_ID { - __u32 signature; /* ZFIRM/U signature */ - __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */ -}; - -/* Op. System id */ - -#define C_OS_LINUX 0x00000030 /* generic Linux system */ - -/* channel op_mode */ - -#define C_CH_DISABLE 0x00000000 /* channel is disabled */ -#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */ -#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */ -#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */ -#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */ - -/* comm_parity - parity */ - -#define C_PR_NONE 0x00000000 /* None */ -#define C_PR_ODD 0x00000001 /* Odd */ -#define C_PR_EVEN 0x00000002 /* Even */ -#define C_PR_MARK 0x00000004 /* Mark */ -#define C_PR_SPACE 0x00000008 /* Space */ -#define C_PR_PARITY 0x000000ff - -#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */ -#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */ - -/* comm_data_l - data length and stop bits */ - -#define C_DL_CS5 0x00000001 -#define C_DL_CS6 0x00000002 -#define C_DL_CS7 0x00000004 -#define C_DL_CS8 0x00000008 -#define C_DL_CS 0x0000000f -#define C_DL_1STOP 0x00000010 -#define C_DL_15STOP 0x00000020 -#define C_DL_2STOP 0x00000040 -#define C_DL_STOP 0x000000f0 - -/* interrupt enabling/status */ - -#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */ -#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */ -#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */ -#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */ -#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */ -#define C_IN_MDCD 0x00000100 /* modem DCD change */ -#define C_IN_MDSR 0x00000200 /* modem DSR change */ -#define C_IN_MRI 0x00000400 /* modem RI change */ -#define C_IN_MCTS 0x00000800 /* modem CTS change */ -#define C_IN_RXBRK 0x00001000 /* Break received */ -#define C_IN_PR_ERROR 0x00002000 /* parity error */ -#define C_IN_FR_ERROR 0x00004000 /* frame error */ -#define C_IN_OVR_ERROR 0x00008000 /* overrun error */ -#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */ -#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */ -#define C_IN_MRTS 0x00040000 /* modem RTS drop */ -#define C_IN_ICHAR 0x00080000 - -/* flow control */ - -#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */ -#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */ -#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */ -#define C_FL_SWFLOW 0x0000000f - -/* flow status */ - -#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */ -#define C_FS_SENDING 0x00000001 /* UART is sending data */ -#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */ - -/* rs_control/rs_status RS-232 signals */ - -#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in - IOCTLM command */ -#define C_RS_RTS 0x00000001 /* RTS */ -#define C_RS_DTR 0x00000004 /* DTR */ -#define C_RS_DCD 0x00000100 /* CD */ -#define C_RS_DSR 0x00000200 /* DSR */ -#define C_RS_RI 0x00000400 /* RI */ -#define C_RS_CTS 0x00000800 /* CTS */ - -/* commands Host <-> Board */ - -#define C_CM_RESET 0x01 /* reset/flush buffers */ -#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */ -#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */ -#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */ -#define C_CM_SENDXOFF 0x10 /* send Xoff */ -#define C_CM_SENDXON 0x11 /* send Xon */ -#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */ -#define C_CM_SENDBRK 0x41 /* send break */ -#define C_CM_INTBACK 0x42 /* Interrupt back */ -#define C_CM_SET_BREAK 0x43 /* Tx break on */ -#define C_CM_CLR_BREAK 0x44 /* Tx break off */ -#define C_CM_CMD_DONE 0x45 /* Previous command done */ -#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */ -#define C_CM_TINACT 0x51 /* set inactivity detection */ -#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */ -#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */ -#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */ -#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */ -#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */ -#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */ -#define C_CM_Q_ENABLE 0x58 /* enables queue access from the - driver */ -#define C_CM_Q_DISABLE 0x59 /* disables queue access from the - driver */ - -#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */ -#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */ -#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */ -#define C_CM_RXNNDT 0x63 /* rx no new data timeout */ -#define C_CM_TXFEMPTY 0x64 -#define C_CM_ICHAR 0x65 -#define C_CM_MDCD 0x70 /* modem DCD change */ -#define C_CM_MDSR 0x71 /* modem DSR change */ -#define C_CM_MRI 0x72 /* modem RI change */ -#define C_CM_MCTS 0x73 /* modem CTS change */ -#define C_CM_MRTS 0x74 /* modem RTS drop */ -#define C_CM_RXBRK 0x84 /* Break received */ -#define C_CM_PR_ERROR 0x85 /* Parity error */ -#define C_CM_FR_ERROR 0x86 /* Frame error */ -#define C_CM_OVR_ERROR 0x87 /* Overrun error */ -#define C_CM_RXOFL 0x88 /* RX buffer overflow */ -#define C_CM_CMDERROR 0x90 /* command error */ -#define C_CM_FATAL 0x91 /* fatal error */ -#define C_CM_HW_RESET 0x92 /* reset board */ - -/* - * CH_CTRL - This per port structure contains all parameters - * that control an specific port. It can be seen as the - * configuration registers of a "super-serial-controller". - */ - -struct CH_CTRL { - __u32 op_mode; /* operation mode */ - __u32 intr_enable; /* interrupt masking */ - __u32 sw_flow; /* SW flow control */ - __u32 flow_status; /* output flow status */ - __u32 comm_baud; /* baud rate - numerically specified */ - __u32 comm_parity; /* parity */ - __u32 comm_data_l; /* data length/stop */ - __u32 comm_flags; /* other flags */ - __u32 hw_flow; /* HW flow control */ - __u32 rs_control; /* RS-232 outputs */ - __u32 rs_status; /* RS-232 inputs */ - __u32 flow_xon; /* xon char */ - __u32 flow_xoff; /* xoff char */ - __u32 hw_overflow; /* hw overflow counter */ - __u32 sw_overflow; /* sw overflow counter */ - __u32 comm_error; /* frame/parity error counter */ - __u32 ichar; - __u32 filler[7]; -}; - - -/* - * BUF_CTRL - This per channel structure contains - * all Tx and Rx buffer control for a given channel. - */ - -struct BUF_CTRL { - __u32 flag_dma; /* buffers are in Host memory */ - __u32 tx_bufaddr; /* address of the tx buffer */ - __u32 tx_bufsize; /* tx buffer size */ - __u32 tx_threshold; /* tx low water mark */ - __u32 tx_get; /* tail index tx buf */ - __u32 tx_put; /* head index tx buf */ - __u32 rx_bufaddr; /* address of the rx buffer */ - __u32 rx_bufsize; /* rx buffer size */ - __u32 rx_threshold; /* rx high water mark */ - __u32 rx_get; /* tail index rx buf */ - __u32 rx_put; /* head index rx buf */ - __u32 filler[5]; /* filler to align structures */ -}; - -/* - * BOARD_CTRL - This per board structure contains all global - * control fields related to the board. - */ - -struct BOARD_CTRL { - - /* static info provided by the on-board CPU */ - __u32 n_channel; /* number of channels */ - __u32 fw_version; /* firmware version */ - - /* static info provided by the driver */ - __u32 op_system; /* op_system id */ - __u32 dr_version; /* driver version */ - - /* board control area */ - __u32 inactivity; /* inactivity control */ - - /* host to FW commands */ - __u32 hcmd_channel; /* channel number */ - __u32 hcmd_param; /* pointer to parameters */ - - /* FW to Host commands */ - __u32 fwcmd_channel; /* channel number */ - __u32 fwcmd_param; /* pointer to parameters */ - __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */ - - /* filler so the structures are aligned */ - __u32 filler[6]; -}; - -/* Host Interrupt Queue */ - -#define QUEUE_SIZE (10*MAX_CHAN) - -struct INT_QUEUE { - unsigned char intr_code[QUEUE_SIZE]; - unsigned long channel[QUEUE_SIZE]; - unsigned long param[QUEUE_SIZE]; - unsigned long put; - unsigned long get; -}; - -/* - * ZFW_CTRL - This is the data structure that includes all other - * data structures used by the Firmware. - */ - -struct ZFW_CTRL { - struct BOARD_CTRL board_ctrl; - struct CH_CTRL ch_ctrl[MAX_CHAN]; - struct BUF_CTRL buf_ctrl[MAX_CHAN]; -}; - -/****************** ****************** *******************/ -#endif +#include <uapi/linux/cyclades.h> -#ifdef __KERNEL__ /* Per card data structure */ struct cyclades_card { @@ -780,5 +357,4 @@ struct cyclades_port { /***************************************************************************/ -#endif /* __KERNEL__ */ #endif /* _LINUX_CYCLADES_H */ |