diff options
Diffstat (limited to 'include/linux/hil.h')
| -rw-r--r-- | include/linux/hil.h | 483 |
1 files changed, 483 insertions, 0 deletions
diff --git a/include/linux/hil.h b/include/linux/hil.h new file mode 100644 index 000000000000..13352d7d0caf --- /dev/null +++ b/include/linux/hil.h @@ -0,0 +1,483 @@ +#ifndef _HIL_H_ +#define _HIL_H_ + +/* + * Hewlett Packard Human Interface Loop (HP-HIL) Protocol -- header. + * + * Copyright (c) 2001 Brian S. Julin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * References: + * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A + * + * A note of thanks to HP for providing and shipping reference materials + * free of charge to help in the development of HIL support for Linux. + * + */ + +#include <asm/types.h> + +/* Physical constants relevant to raw loop/device timing. + */ + +#define HIL_CLOCK 8MHZ +#define HIL_EK1_CLOCK 30HZ +#define HIL_EK2_CLOCK 60HZ + +#define HIL_TIMEOUT_DEV 5 /* ms */ +#define HIL_TIMEOUT_DEVS 10 /* ms */ +#define HIL_TIMEOUT_NORESP 10 /* ms */ +#define HIL_TIMEOUT_DEVS_DATA 16 /* ms */ +#define HIL_TIMEOUT_SELFTEST 200 /* ms */ + + +/* Actual wire line coding. These will only be useful if someone is + * implementing a software MLC to run HIL devices on a non-parisc machine. + */ + +#define HIL_WIRE_PACKET_LEN 15 +enum hil_wire_bitpos { + HIL_WIRE_START = 0, + HIL_WIRE_ADDR2, + HIL_WIRE_ADDR1, + HIL_WIRE_ADDR0, + HIL_WIRE_COMMAND, + HIL_WIRE_DATA7, + HIL_WIRE_DATA6, + HIL_WIRE_DATA5, + HIL_WIRE_DATA4, + HIL_WIRE_DATA3, + HIL_WIRE_DATA2, + HIL_WIRE_DATA1, + HIL_WIRE_DATA0, + HIL_WIRE_PARITY, + HIL_WIRE_STOP +}; + +/* HP documentation uses these bit positions to refer to commands; + * we will call these "packets". + */ +enum hil_pkt_bitpos { + HIL_PKT_CMD = 0x00000800, + HIL_PKT_ADDR2 = 0x00000400, + HIL_PKT_ADDR1 = 0x00000200, + HIL_PKT_ADDR0 = 0x00000100, + HIL_PKT_ADDR_MASK = 0x00000700, + HIL_PKT_ADDR_SHIFT = 8, + HIL_PKT_DATA7 = 0x00000080, + HIL_PKT_DATA6 = 0x00000040, + HIL_PKT_DATA5 = 0x00000020, + HIL_PKT_DATA4 = 0x00000010, + HIL_PKT_DATA3 = 0x00000008, + HIL_PKT_DATA2 = 0x00000004, + HIL_PKT_DATA1 = 0x00000002, + HIL_PKT_DATA0 = 0x00000001, + HIL_PKT_DATA_MASK = 0x000000FF, + HIL_PKT_DATA_SHIFT = 0 +}; + +/* The HIL MLC also has several error/status/control bits. We extend the + * "packet" to include these when direct access to the MLC is available, + * or emulate them in cases where they are not available. + * + * This way the device driver knows that the underlying MLC driver + * has had to deal with loop errors. + */ +enum hil_error_bitpos { + HIL_ERR_OB = 0x00000800, /* MLC is busy sending an auto-poll, + or we have filled up the output + buffer and must wait. */ + HIL_ERR_INT = 0x00010000, /* A normal interrupt has occurred. */ + HIL_ERR_NMI = 0x00020000, /* An NMI has occurred. */ + HIL_ERR_LERR = 0x00040000, /* A poll didn't come back. */ + HIL_ERR_PERR = 0x01000000, /* There was a Parity Error. */ + HIL_ERR_FERR = 0x02000000, /* There was a Framing Error. */ + HIL_ERR_FOF = 0x04000000 /* Input FIFO Overflowed. */ +}; + +enum hil_control_bitpos { + HIL_CTRL_TEST = 0x00010000, + HIL_CTRL_IPF = 0x00040000, + HIL_CTRL_APE = 0x02000000 +}; + +/* Bits 30,31 are unused, we use them to control write behavior. */ +#define HIL_DO_ALTER_CTRL 0x40000000 /* Write MSW of packet to control + before writing LSW to loop */ +#define HIL_CTRL_ONLY 0xc0000000 /* *Only* alter the control registers */ + +/* This gives us a 32-bit "packet" + */ +typedef u32 hil_packet; + + +/* HIL Loop commands + */ +enum hil_command { + HIL_CMD_IFC = 0x00, /* Interface Clear */ + HIL_CMD_EPT = 0x01, /* Enter Pass-Thru Mode */ + HIL_CMD_ELB = 0x02, /* Enter Loop-Back Mode */ + HIL_CMD_IDD = 0x03, /* Identify and Describe */ + HIL_CMD_DSR = 0x04, /* Device Soft Reset */ + HIL_CMD_PST = 0x05, /* Perform Self Test */ + HIL_CMD_RRG = 0x06, /* Read Register */ + HIL_CMD_WRG = 0x07, /* Write Register */ + HIL_CMD_ACF = 0x08, /* Auto Configure */ + HIL_CMDID_ACF = 0x07, /* Auto Configure bits with incremented ID */ + HIL_CMD_POL = 0x10, /* Poll */ + HIL_CMDCT_POL = 0x0f, /* Poll command bits with item count */ + HIL_CMD_RPL = 0x20, /* RePoll */ + HIL_CMDCT_RPL = 0x0f, /* RePoll command bits with item count */ + HIL_CMD_RNM = 0x30, /* Report Name */ + HIL_CMD_RST = 0x31, /* Report Status */ + HIL_CMD_EXD = 0x32, /* Extended Describe */ + HIL_CMD_RSC = 0x33, /* Report Security Code */ + + /* 0x34 to 0x3c reserved for future use */ + + HIL_CMD_DKA = 0x3d, /* Disable Keyswitch Autorepeat */ + HIL_CMD_EK1 = 0x3e, /* Enable Keyswitch Autorepeat 1 */ + HIL_CMD_EK2 = 0x3f, /* Enable Keyswitch Autorepeat 2 */ + HIL_CMD_PR1 = 0x40, /* Prompt1 */ + HIL_CMD_PR2 = 0x41, /* Prompt2 */ + HIL_CMD_PR3 = 0x42, /* Prompt3 */ + HIL_CMD_PR4 = 0x43, /* Prompt4 */ + HIL_CMD_PR5 = 0x44, /* Prompt5 */ + HIL_CMD_PR6 = 0x45, /* Prompt6 */ + HIL_CMD_PR7 = 0x46, /* Prompt7 */ + HIL_CMD_PRM = 0x47, /* Prompt (General Purpose) */ + HIL_CMD_AK1 = 0x48, /* Acknowlege1 */ + HIL_CMD_AK2 = 0x49, /* Acknowlege2 */ + HIL_CMD_AK3 = 0x4a, /* Acknowlege3 */ + HIL_CMD_AK4 = 0x4b, /* Acknowlege4 */ + HIL_CMD_AK5 = 0x4c, /* Acknowlege5 */ + HIL_CMD_AK6 = 0x4d, /* Acknowlege6 */ + HIL_CMD_AK7 = 0x4e, /* Acknowlege7 */ + HIL_CMD_ACK = 0x4f, /* Acknowlege (General Purpose) */ + + /* 0x50 to 0x78 reserved for future use */ + /* 0x80 to 0xEF device-specific commands */ + /* 0xf0 to 0xf9 reserved for future use */ + + HIL_CMD_RIO = 0xfa, /* Register I/O Error */ + HIL_CMD_SHR = 0xfb, /* System Hard Reset */ + HIL_CMD_TER = 0xfc, /* Transmission Error */ + HIL_CMD_CAE = 0xfd, /* Configuration Address Error */ + HIL_CMD_DHR = 0xfe, /* Device Hard Reset */ + + /* 0xff is prohibited from use. */ +}; + + +/* + * Response "records" to HIL commands + */ + +/* Device ID byte + */ +#define HIL_IDD_DID_TYPE_MASK 0xe0 /* Primary type bits */ +#define HIL_IDD_DID_TYPE_KB_INTEGRAL 0xa0 /* Integral keyboard */ +#define HIL_IDD_DID_TYPE_KB_ITF 0xc0 /* ITD keyboard */ +#define HIL_IDD_DID_TYPE_KB_RSVD 0xe0 /* Reserved keyboard type */ +#define HIL_IDD_DID_TYPE_KB_LANG_MASK 0x1f /* Keyboard locale bits */ +#define HIL_IDD_DID_KBLANG_USE_ESD 0x00 /* Use ESD Locale instead */ +#define HIL_IDD_DID_TYPE_ABS 0x80 /* Absolute Positioners */ +#define HIL_IDD_DID_ABS_RSVD1_MASK 0xf8 /* Reserved */ +#define HIL_IDD_DID_ABS_RSVD1 0x98 +#define HIL_IDD_DID_ABS_TABLET_MASK 0xf8 /* Tablets and digitizers */ +#define HIL_IDD_DID_ABS_TABLET 0x90 +#define HIL_IDD_DID_ABS_TSCREEN_MASK 0xfc /* Touch screens */ +#define HIL_IDD_DID_ABS_TSCREEN 0x8c +#define HIL_IDD_DID_ABS_RSVD2_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_ABS_RSVD2 0x88 +#define HIL_IDD_DID_ABS_RSVD3_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_ABS_RSVD3 0x80 +#define HIL_IDD_DID_TYPE_REL 0x60 /* Relative Positioners */ +#define HIL_IDD_DID_REL_RSVD1_MASK 0xf0 /* Reserved */ +#define HIL_IDD_DID_REL_RSVD1 0x70 +#define HIL_IDD_DID_REL_RSVD2_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_REL_RSVD2 0x6c +#define HIL_IDD_DID_REL_MOUSE_MASK 0xfc /* Mouse */ +#define HIL_IDD_DID_REL_MOUSE 0x68 +#define HIL_IDD_DID_REL_QUAD_MASK 0xf8 /* Other Quadrature Devices */ +#define HIL_IDD_DID_REL_QUAD 0x60 +#define HIL_IDD_DID_TYPE_CHAR 0x40 /* Character Entry */ +#define HIL_IDD_DID_CHAR_BARCODE_MASK 0xfc /* Barcode Reader */ +#define HIL_IDD_DID_CHAR_BARCODE 0x5c +#define HIL_IDD_DID_CHAR_RSVD1_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_CHAR_RSVD1 0x58 +#define HIL_IDD_DID_CHAR_RSVD2_MASK 0xf8 /* Reserved */ +#define HIL_IDD_DID_CHAR_RSVD2 0x50 +#define HIL_IDD_DID_CHAR_RSVD3_MASK 0xf0 /* Reserved */ +#define HIL_IDD_DID_CHAR_RSVD3 0x40 +#define HIL_IDD_DID_TYPE_OTHER 0x20 /* Miscellaneous */ +#define HIL_IDD_DID_OTHER_RSVD1_MASK 0xf0 /* Reserved */ +#define HIL_IDD_DID_OTHER_RSVD1 0x30 +#define HIL_IDD_DID_OTHER_BARCODE_MASK 0xfc /* Tone Generator */ +#define HIL_IDD_DID_OTHER_BARCODE 0x2c +#define HIL_IDD_DID_OTHER_RSVD2_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_OTHER_RSVD2 0x28 +#define HIL_IDD_DID_OTHER_RSVD3_MASK 0xf8 /* Reserved */ +#define HIL_IDD_DID_OTHER_RSVD3 0x20 +#define HIL_IDD_DID_TYPE_KEYPAD 0x00 /* Vectra Keyboard */ + +/* IDD record header + */ +#define HIL_IDD_HEADER_AXSET_MASK 0x03 /* Number of axis in a set */ +#define HIL_IDD_HEADER_RSC 0x04 /* Supports RSC command */ +#define HIL_IDD_HEADER_EXD 0x08 /* Supports EXD command */ +#define HIL_IDD_HEADER_IOD 0x10 /* IOD byte to follow */ +#define HIL_IDD_HEADER_16BIT 0x20 /* 16 (vs. 8) bit resolution */ +#define HIL_IDD_HEADER_ABS 0x40 /* Reports Absolute Position */ +#define HIL_IDD_HEADER_2X_AXIS 0x80 /* Two sets of 1-3 axis */ + +/* I/O Descriptor + */ +#define HIL_IDD_IOD_NBUTTON_MASK 0x07 /* Number of buttons */ +#define HIL_IDD_IOD_PROXIMITY 0x08 /* Proximity in/out events */ +#define HIL_IDD_IOD_PROMPT_MASK 0x70 /* Number of prompts/acks */ +#define HIL_IDD_IOD_PROMPT_SHIFT 4 +#define HIL_IDD_IOD_PROMPT 0x80 /* Generic prompt/ack */ + +#define HIL_IDD_NUM_AXES_PER_SET(header_packet) \ +((header_packet) & HIL_IDD_HEADER_AXSET_MASK) + +#define HIL_IDD_NUM_AXSETS(header_packet) \ +(2 - !((header_packet) & HIL_IDD_HEADER_2X_AXIS)) + +#define HIL_IDD_LEN(header_packet) \ +((4 - !(header_packet & HIL_IDD_HEADER_IOD) - \ + 2 * !(HIL_IDD_NUM_AXES_PER_SET(header_packet))) + \ + 2 * HIL_IDD_NUM_AXES_PER_SET(header_packet) * \ + !!((header_packet) & HIL_IDD_HEADER_ABS)) + +/* The following HIL_IDD_* macros assume you have an array of + * packets and/or unpacked 8-bit data in the order that they + * were received. + */ + +#define HIL_IDD_AXIS_COUNTS_PER_M(header_ptr) \ +(!(HIL_IDD_NUM_AXSETS(*(header_ptr))) ? -1 : \ +(((*(header_ptr + 1) & HIL_PKT_DATA_MASK) + \ + ((*(header_ptr + 2) & HIL_PKT_DATA_MASK)) << 8) \ +* ((*(header_ptr) & HIL_IDD_HEADER_16BIT) ? 100 : 1))) + +#define HIL_IDD_AXIS_MAX(header_ptr, __axnum) \ +((!(*(header_ptr) & HIL_IDD_HEADER_ABS) || \ + (HIL_IDD_NUM_AXES_PER_SET(*(header_ptr)) <= __axnum)) ? 0 : \ + ((HIL_PKT_DATA_MASK & *((header_ptr) + 3 + 2 * __axnum)) + \ + ((HIL_PKT_DATA_MASK & *((header_ptr) + 4 + 2 * __axnum)) << 8))) + +#define HIL_IDD_IOD(header_ptr) \ +(*(header_ptr + HIL_IDD_LEN((*header_ptr)) - 1)) + +#define HIL_IDD_HAS_GEN_PROMPT(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) && \ + (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROMPT)) + +#define HIL_IDD_HAS_GEN_PROXIMITY(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) && \ + (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROXIMITY)) + +#define HIL_IDD_NUM_BUTTONS(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) ? \ + (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NBUTTON_MASK) : 0) + +#define HIL_IDD_NUM_PROMPTS(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) ? \ + ((HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NPROMPT_MASK) \ + >> HIL_IDD_IOD_PROMPT_SHIFT) : 0) + +/* The response to HIL EXD commands -- the "extended describe record" */ +#define HIL_EXD_HEADER_WRG 0x03 /* Supports type2 WRG */ +#define HIL_EXD_HEADER_WRG_TYPE1 0x01 /* Supports type1 WRG */ +#define HIL_EXD_HEADER_WRG_TYPE2 0x02 /* Supports type2 WRG */ +#define HIL_EXD_HEADER_RRG 0x04 /* Supports RRG command */ +#define HIL_EXD_HEADER_RNM 0x10 /* Supports RNM command */ +#define HIL_EXD_HEADER_RST 0x20 /* Supports RST command */ +#define HIL_EXD_HEADER_LOCALE 0x40 /* Contains locale code */ + +#define HIL_EXD_NUM_RRG(header_ptr) \ +((*header_ptr & HIL_EXD_HEADER_RRG) ? \ + (*(header_ptr + 1) & HIL_PKT_DATA_MASK) : 0) + +#define HIL_EXD_NUM_WWG(header_ptr) \ +((*header_ptr & HIL_EXD_HEADER_WRG) ? \ + (*(header_ptr + 2 - !(*header_ptr & HIL_EXD_HEADER_RRG)) & \ + HIL_PKT_DATA_MASK) : 0) + +#define HIL_EXD_LEN(header_ptr) \ +(!!(*header_ptr & HIL_EXD_HEADER_RRG) + \ + !!(*header_ptr & HIL_EXD_HEADER_WRG) + \ + !!(*header_ptr & HIL_EXD_HEADER_LOCALE) + \ + 2 * !!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) + 1) + +#define HIL_EXD_LOCALE(header_ptr) \ +(!(*header_ptr & HIL_EXD_HEADER_LOCALE) ? -1 : \ + (*(header_ptr + HIL_EXD_LEN(header_ptr) - 1) & HIL_PKT_DATA_MASK)) + +#define HIL_EXD_WRG_TYPE2_LEN(header_ptr) \ +(!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) ? -1 : \ + (*(header_ptr + HIL_EXD_LEN(header_ptr) - 2 - \ + !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) + \ + ((*(header_ptr + HIL_EXD_LEN(header_ptr) - 1 - \ + !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) << 8)) + +/* Device locale codes. */ + +/* Last defined locale code. Everything above this is "Reserved", + and note that this same table applies to the Device ID Byte where + keyboards may have a nationality code which is only 5 bits. */ +#define HIL_LOCALE_MAX 0x1f + +/* Map to hopefully useful strings. I was trying to make these look + like locale.aliases strings do; maybe that isn't the right table to + emulate. In either case, I didn't have much to work on. */ +#define HIL_LOCALE_MAP \ +"", /* 0x00 Reserved */ \ +"", /* 0x01 Reserved */ \ +"", /* 0x02 Reserved */ \ +"swiss.french", /* 0x03 Swiss/French */ \ +"portuguese", /* 0x04 Portuguese */ \ +"arabic", /* 0x05 Arabic */ \ +"hebrew", /* 0x06 Hebrew */ \ +"english.canadian", /* 0x07 Canadian English */ \ +"turkish", /* 0x08 Turkish */ \ +"greek", /* 0x09 Greek */ \ +"thai", /* 0x0a Thai (Thailand) */ \ +"italian", /* 0x0b Italian */ \ +"korean", /* 0x0c Hangul (Korea) */ \ +"dutch", /* 0x0d Dutch */ \ +"swedish", /* 0x0e Swedish */ \ +"german", /* 0x0f German */ \ +"chinese", /* 0x10 Chinese-PRC */ \ +"chinese", /* 0x11 Chinese-ROC */ \ +"swiss.french", /* 0x12 Swiss/French II */ \ +"spanish", /* 0x13 Spanish */ \ +"swiss.german", /* 0x14 Swiss/German II */ \ +"flemish", /* 0x15 Belgian (Flemish) */ \ +"finnish", /* 0x16 Finnish */ \ +"english.uk", /* 0x17 United Kingdom */ \ +"french.canadian", /* 0x18 French/Canadian */ \ +"swiss.german", /* 0x19 Swiss/German */ \ +"norwegian", /* 0x1a Norwegian */ \ +"french", /* 0x1b French */ \ +"danish", /* 0x1c Danish */ \ +"japanese", /* 0x1d Katakana */ \ +"spanish", /* 0x1e Latin American/Spanish*/\ +"english.us" /* 0x1f United States */ \ + + +/* HIL keycodes */ +#define HIL_KEYCODES_SET1_TBLSIZE 128 +#define HIL_KEYCODES_SET1 \ + KEY_5, KEY_RESERVED, KEY_RIGHTALT, KEY_LEFTALT, \ + KEY_RIGHTSHIFT, KEY_LEFTSHIFT, KEY_LEFTCTRL, KEY_SYSRQ, \ + KEY_KP4, KEY_KP8, KEY_KP5, KEY_KP9, \ + KEY_KP6, KEY_KP7, KEY_KPCOMMA, KEY_KPENTER, \ + KEY_KP1, KEY_KPSLASH, KEY_KP2, KEY_KPPLUS, \ + KEY_KP3, KEY_KPASTERISK, KEY_KP0, KEY_KPMINUS, \ + KEY_B, KEY_V, KEY_C, KEY_X, \ + KEY_Z, KEY_RESERVED, KEY_RESERVED, KEY_ESC, \ + KEY_6, KEY_F10, KEY_3, KEY_F11, \ + KEY_KPDOT, KEY_F9, KEY_TAB /*KP*/, KEY_F12, \ + KEY_H, KEY_G, KEY_F, KEY_D, \ + KEY_S, KEY_A, KEY_RESERVED, KEY_CAPSLOCK, \ + KEY_U, KEY_Y, KEY_T, KEY_R, \ + KEY_E, KEY_W, KEY_Q, KEY_TAB, \ + KEY_7, KEY_6, KEY_5, KEY_4, \ + KEY_3, KEY_2, KEY_1, KEY_GRAVE, \ + KEY_F13, KEY_F14, KEY_F15, KEY_F16, \ + KEY_F17, KEY_F18, KEY_F19, KEY_F20, \ + KEY_MENU, KEY_F4, KEY_F3, KEY_F2, \ + KEY_F1, KEY_VOLUMEUP, KEY_STOP, KEY_SENDFILE, \ + KEY_SYSRQ, KEY_F5, KEY_F6, KEY_F7, \ + KEY_F8, KEY_VOLUMEDOWN, KEY_DEL_EOL, KEY_DEL_EOS, \ + KEY_8, KEY_9, KEY_0, KEY_MINUS, \ + KEY_EQUAL, KEY_BACKSPACE, KEY_INS_LINE, KEY_DEL_LINE, \ + KEY_I, KEY_O, KEY_P, KEY_LEFTBRACE, \ + KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_INSERT, KEY_DELETE, \ + KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \ + KEY_APOSTROPHE, KEY_ENTER, KEY_HOME, KEY_PAGEUP, \ + KEY_M, KEY_COMMA, KEY_DOT, KEY_SLASH, \ + KEY_BACKSLASH, KEY_SELECT, KEY_102ND, KEY_PAGEDOWN, \ + KEY_N, KEY_SPACE, KEY_NEXT, KEY_RESERVED, \ + KEY_LEFT, KEY_DOWN, KEY_UP, KEY_RIGHT + + +#define HIL_KEYCODES_SET3_TBLSIZE 128 +#define HIL_KEYCODES_SET3 \ + KEY_RESERVED, KEY_ESC, KEY_1, KEY_2, \ + KEY_3, KEY_4, KEY_5, KEY_6, \ + KEY_7, KEY_8, KEY_9, KEY_0, \ + KEY_MINUS, KEY_EQUAL, KEY_BACKSPACE, KEY_TAB, \ + KEY_Q, KEY_W, KEY_E, KEY_R, \ + KEY_T, KEY_Y, KEY_U, KEY_I, \ + KEY_O, KEY_P, KEY_LEFTBRACE, KEY_RIGHTBRACE, \ + KEY_ENTER, KEY_LEFTCTRL, KEY_A, KEY_S, \ + KEY_D, KEY_F, KEY_G, KEY_H, \ + KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \ + KEY_APOSTROPHE,KEY_GRAVE, KEY_LEFTSHIFT, KEY_BACKSLASH, \ + KEY_Z, KEY_X, KEY_C, KEY_V, \ + KEY_B, KEY_N, KEY_M, KEY_COMMA, \ + KEY_DOT, KEY_SLASH, KEY_RIGHTSHIFT, KEY_KPASTERISK, \ + KEY_LEFTALT, KEY_SPACE, KEY_CAPSLOCK, KEY_F1, \ + KEY_F2, KEY_F3, KEY_F4, KEY_F5, \ + KEY_F6, KEY_F7, KEY_F8, KEY_F9, \ + KEY_F10, KEY_NUMLOCK, KEY_SCROLLLOCK, KEY_KP7, \ + KEY_KP8, KEY_KP9, KEY_KPMINUS, KEY_KP4, \ + KEY_KP5, KEY_KP6, KEY_KPPLUS, KEY_KP1, \ + KEY_KP2, KEY_KP3, KEY_KP0, KEY_KPDOT, \ + KEY_SYSRQ, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_UP, KEY_LEFT, KEY_DOWN, KEY_RIGHT, \ + KEY_HOME, KEY_PAGEUP, KEY_END, KEY_PAGEDOWN, \ + KEY_INSERT, KEY_DELETE, KEY_102ND, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_F1, KEY_F2, KEY_F3, KEY_F4, \ + KEY_F5, KEY_F6, KEY_F7, KEY_F8, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED + + +/* Response to POL command, the "poll record header" */ + +#define HIL_POL_NUM_AXES_MASK 0x03 /* Number of axis reported */ +#define HIL_POL_CTS 0x04 /* Device ready to receive data */ +#define HIL_POL_STATUS_PENDING 0x08 /* Device has status to report */ +#define HIL_POL_CHARTYPE_MASK 0x70 /* Type of character data to follow */ +#define HIL_POL_CHARTYPE_NONE 0x00 /* No character data to follow */ +#define HIL_POL_CHARTYPE_RSVD1 0x10 /* Reserved Set 1 */ +#define HIL_POL_CHARTYPE_ASCII 0x20 /* U.S. ASCII */ +#define HIL_POL_CHARTYPE_BINARY 0x30 /* Binary data */ +#define HIL_POL_CHARTYPE_SET1 0x40 /* Keycode Set 1 */ +#define HIL_POL_CHARTYPE_RSVD2 0x50 /* Reserved Set 2 */ +#define HIL_POL_CHARTYPE_SET2 0x60 /* Keycode Set 2 */ +#define HIL_POL_CHARTYPE_SET3 0x70 /* Keycode Set 3 */ +#define HIL_POL_AXIS_ALT 0x80 /* Data is from axis set 2 */ + + +#endif /* _HIL_H_ */ |