diff options
Diffstat (limited to 'include/linux/i2c/bfin_twi.h')
| -rw-r--r-- | include/linux/i2c/bfin_twi.h | 145 |
1 files changed, 145 insertions, 0 deletions
diff --git a/include/linux/i2c/bfin_twi.h b/include/linux/i2c/bfin_twi.h new file mode 100644 index 000000000000..135a4e0876ae --- /dev/null +++ b/include/linux/i2c/bfin_twi.h @@ -0,0 +1,145 @@ +/* + * i2c-bfin-twi.h - interface to ADI TWI controller + * + * Copyright 2005-2014 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __I2C_BFIN_TWI_H__ +#define __I2C_BFIN_TWI_H__ + +#include <linux/types.h> +#include <linux/i2c.h> + +/* + * ADI twi registers layout + */ +struct bfin_twi_regs { + u16 clkdiv; + u16 dummy1; + u16 control; + u16 dummy2; + u16 slave_ctl; + u16 dummy3; + u16 slave_stat; + u16 dummy4; + u16 slave_addr; + u16 dummy5; + u16 master_ctl; + u16 dummy6; + u16 master_stat; + u16 dummy7; + u16 master_addr; + u16 dummy8; + u16 int_stat; + u16 dummy9; + u16 int_mask; + u16 dummy10; + u16 fifo_ctl; + u16 dummy11; + u16 fifo_stat; + u16 dummy12; + u32 __pad[20]; + u16 xmt_data8; + u16 dummy13; + u16 xmt_data16; + u16 dummy14; + u16 rcv_data8; + u16 dummy15; + u16 rcv_data16; + u16 dummy16; +}; + +struct bfin_twi_iface { + int irq; + spinlock_t lock; + char read_write; + u8 command; + u8 *transPtr; + int readNum; + int writeNum; + int cur_mode; + int manual_stop; + int result; + struct i2c_adapter adap; + struct completion complete; + struct i2c_msg *pmsg; + int msg_num; + int cur_msg; + u16 saved_clkdiv; + u16 saved_control; + struct bfin_twi_regs __iomem *regs_base; +}; + +/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ********************/ +/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ +#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ + +/* TWI_PRESCALE Masks */ +#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ +#define TWI_ENA 0x0080 /* TWI Enable */ +#define SCCB 0x0200 /* SCCB Compatibility Enable */ + +/* TWI_SLAVE_CTL Masks */ +#define SEN 0x0001 /* Slave Enable */ +#define SADD_LEN 0x0002 /* Slave Address Length */ +#define STDVAL 0x0004 /* Slave Transmit Data Valid */ +#define NAK 0x0008 /* NAK Generated At Conclusion Of Transfer */ +#define GEN 0x0010 /* General Call Address Matching Enabled */ + +/* TWI_SLAVE_STAT Masks */ +#define SDIR 0x0001 /* Slave Transfer Direction (RX/TX*) */ +#define GCALL 0x0002 /* General Call Indicator */ + +/* TWI_MASTER_CTL Masks */ +#define MEN 0x0001 /* Master Mode Enable */ +#define MADD_LEN 0x0002 /* Master Address Length */ +#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ +#define FAST 0x0008 /* Use Fast Mode Timing Specs */ +#define STOP 0x0010 /* Issue Stop Condition */ +#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ +#define DCNT 0x3FC0 /* Data Bytes To Transfer */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* TWI_MASTER_STAT Masks */ +#define MPROG 0x0001 /* Master Transfer In Progress */ +#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ +#define ANAK 0x0004 /* Address Not Acknowledged */ +#define DNAK 0x0008 /* Data Not Acknowledged */ +#define BUFRDERR 0x0010 /* Buffer Read Error */ +#define BUFWRERR 0x0020 /* Buffer Write Error */ +#define SDASEN 0x0040 /* Serial Data Sense */ +#define SCLSEN 0x0080 /* Serial Clock Sense */ +#define BUSBUSY 0x0100 /* Bus Busy Indicator */ + +/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ +#define SINIT 0x0001 /* Slave Transfer Initiated */ +#define SCOMP 0x0002 /* Slave Transfer Complete */ +#define SERR 0x0004 /* Slave Transfer Error */ +#define SOVF 0x0008 /* Slave Overflow */ +#define MCOMP 0x0010 /* Master Transfer Complete */ +#define MERR 0x0020 /* Master Transfer Error */ +#define XMTSERV 0x0040 /* Transmit FIFO Service */ +#define RCVSERV 0x0080 /* Receive FIFO Service */ + +/* TWI_FIFO_CTRL Masks */ +#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ +#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ + +/* TWI_FIFO_STAT Masks */ +#define XMTSTAT 0x0003 /* Transmit FIFO Status */ +#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ +#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ +#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ + +#define RCVSTAT 0x000C /* Receive FIFO Status */ +#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ +#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ +#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ + +#endif |