diff options
Diffstat (limited to 'include/linux/i2c')
| -rw-r--r-- | include/linux/i2c/adp5588.h | 37 | ||||
| -rw-r--r-- | include/linux/i2c/ltc4245.h | 21 | ||||
| -rw-r--r-- | include/linux/i2c/mcs.h | 34 | ||||
| -rw-r--r-- | include/linux/i2c/mcs5000_ts.h | 24 | ||||
| -rw-r--r-- | include/linux/i2c/pca954x.h | 47 | ||||
| -rw-r--r-- | include/linux/i2c/qt602240_ts.h | 38 | ||||
| -rw-r--r-- | include/linux/i2c/sx150x.h | 78 |
7 files changed, 255 insertions, 24 deletions
diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h index 02c9af374741..269181b8f623 100644 --- a/include/linux/i2c/adp5588.h +++ b/include/linux/i2c/adp5588.h @@ -78,6 +78,40 @@ #define ADP5588_KEYMAPSIZE 80 +#define GPI_PIN_ROW0 97 +#define GPI_PIN_ROW1 98 +#define GPI_PIN_ROW2 99 +#define GPI_PIN_ROW3 100 +#define GPI_PIN_ROW4 101 +#define GPI_PIN_ROW5 102 +#define GPI_PIN_ROW6 103 +#define GPI_PIN_ROW7 104 +#define GPI_PIN_COL0 105 +#define GPI_PIN_COL1 106 +#define GPI_PIN_COL2 107 +#define GPI_PIN_COL3 108 +#define GPI_PIN_COL4 109 +#define GPI_PIN_COL5 110 +#define GPI_PIN_COL6 111 +#define GPI_PIN_COL7 112 +#define GPI_PIN_COL8 113 +#define GPI_PIN_COL9 114 + +#define GPI_PIN_ROW_BASE GPI_PIN_ROW0 +#define GPI_PIN_ROW_END GPI_PIN_ROW7 +#define GPI_PIN_COL_BASE GPI_PIN_COL0 +#define GPI_PIN_COL_END GPI_PIN_COL9 + +#define GPI_PIN_BASE GPI_PIN_ROW_BASE +#define GPI_PIN_END GPI_PIN_COL_END + +#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1) + +struct adp5588_gpi_map { + unsigned short pin; + unsigned short sw_evt; +}; + struct adp5588_kpad_platform_data { int rows; /* Number of rows */ int cols; /* Number of columns */ @@ -87,6 +121,9 @@ struct adp5588_kpad_platform_data { unsigned en_keylock:1; /* Enable Key Lock feature */ unsigned short unlock_key1; /* Unlock Key 1 */ unsigned short unlock_key2; /* Unlock Key 2 */ + const struct adp5588_gpi_map *gpimap; + unsigned short gpimapsize; + const struct adp5588_gpio_platform_data *gpio_data; }; struct adp5588_gpio_platform_data { diff --git a/include/linux/i2c/ltc4245.h b/include/linux/i2c/ltc4245.h new file mode 100644 index 000000000000..56bda4be0016 --- /dev/null +++ b/include/linux/i2c/ltc4245.h @@ -0,0 +1,21 @@ +/* + * Platform Data for LTC4245 hardware monitor chip + * + * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef LINUX_LTC4245_H +#define LINUX_LTC4245_H + +#include <linux/types.h> + +struct ltc4245_platform_data { + bool use_extra_gpios; +}; + +#endif /* LINUX_LTC4245_H */ diff --git a/include/linux/i2c/mcs.h b/include/linux/i2c/mcs.h new file mode 100644 index 000000000000..725ae7c313ff --- /dev/null +++ b/include/linux/i2c/mcs.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * Author: HeungJun Kim <riverful.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MCS_H +#define __LINUX_MCS_H + +#define MCS_KEY_MAP(v, c) ((((v) & 0xff) << 16) | ((c) & 0xffff)) +#define MCS_KEY_VAL(v) (((v) >> 16) & 0xff) +#define MCS_KEY_CODE(v) ((v) & 0xffff) + +struct mcs_platform_data { + void (*cfg_pin)(void); + + /* touchscreen */ + unsigned int x_size; + unsigned int y_size; + + /* touchkey */ + const u32 *keymap; + unsigned int keymap_size; + unsigned int key_maxval; + bool no_autorepeat; +}; + +#endif /* __LINUX_MCS_H */ diff --git a/include/linux/i2c/mcs5000_ts.h b/include/linux/i2c/mcs5000_ts.h deleted file mode 100644 index 5a117b5ca15e..000000000000 --- a/include/linux/i2c/mcs5000_ts.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * mcs5000_ts.h - * - * Copyright (C) 2009 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __LINUX_MCS5000_TS_H -#define __LINUX_MCS5000_TS_H - -/* platform data for the MELFAS MCS-5000 touchscreen driver */ -struct mcs5000_ts_platform_data { - void (*cfg_pin)(void); - int x_size; - int y_size; -}; - -#endif /* __LINUX_MCS5000_TS_H */ diff --git a/include/linux/i2c/pca954x.h b/include/linux/i2c/pca954x.h new file mode 100644 index 000000000000..28f1f8d5ab1f --- /dev/null +++ b/include/linux/i2c/pca954x.h @@ -0,0 +1,47 @@ +/* + * + * pca954x.h - I2C multiplexer/switch support + * + * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it> + * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it> + * Michael Lawnick <michael.lawnick.ext@nsn.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#ifndef _LINUX_I2C_PCA954X_H +#define _LINUX_I2C_PCA954X_H + +/* Platform data for the PCA954x I2C multiplexers */ + +/* Per channel initialisation data: + * @adap_id: bus number for the adapter. 0 = don't care + * @deselect_on_exit: set this entry to 1, if your H/W needs deselection + * of this channel after transaction. + * + */ +struct pca954x_platform_mode { + int adap_id; + unsigned int deselect_on_exit:1; +}; + +/* Per mux/switch data, used with i2c_register_board_info */ +struct pca954x_platform_data { + struct pca954x_platform_mode *modes; + int num_modes; +}; + +#endif /* _LINUX_I2C_PCA954X_H */ diff --git a/include/linux/i2c/qt602240_ts.h b/include/linux/i2c/qt602240_ts.h new file mode 100644 index 000000000000..c5033e101094 --- /dev/null +++ b/include/linux/i2c/qt602240_ts.h @@ -0,0 +1,38 @@ +/* + * AT42QT602240/ATMXT224 Touchscreen driver + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __LINUX_QT602240_TS_H +#define __LINUX_QT602240_TS_H + +/* Orient */ +#define QT602240_NORMAL 0x0 +#define QT602240_DIAGONAL 0x1 +#define QT602240_HORIZONTAL_FLIP 0x2 +#define QT602240_ROTATED_90_COUNTER 0x3 +#define QT602240_VERTICAL_FLIP 0x4 +#define QT602240_ROTATED_90 0x5 +#define QT602240_ROTATED_180 0x6 +#define QT602240_DIAGONAL_COUNTER 0x7 + +/* The platform data for the AT42QT602240/ATMXT224 touchscreen driver */ +struct qt602240_platform_data { + unsigned int x_line; + unsigned int y_line; + unsigned int x_size; + unsigned int y_size; + unsigned int blen; + unsigned int threshold; + unsigned int voltage; + unsigned char orient; +}; + +#endif /* __LINUX_QT602240_TS_H */ diff --git a/include/linux/i2c/sx150x.h b/include/linux/i2c/sx150x.h new file mode 100644 index 000000000000..ee3049cb9ba5 --- /dev/null +++ b/include/linux/i2c/sx150x.h @@ -0,0 +1,78 @@ +/* + * Driver for the Semtech SX150x I2C GPIO Expanders + * + * Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef __LINUX_I2C_SX150X_H +#define __LINUX_I2C_SX150X_H + +/** + * struct sx150x_platform_data - config data for SX150x driver + * @gpio_base: The index number of the first GPIO assigned to this + * GPIO expander. The expander will create a block of + * consecutively numbered gpios beginning at the given base, + * with the size of the block depending on the model of the + * expander chip. + * @oscio_is_gpo: If set to true, the driver will configure OSCIO as a GPO + * instead of as an oscillator, increasing the size of the + * GP(I)O pool created by this expander by one. The + * output-only GPO pin will be added at the end of the block. + * @io_pullup_ena: A bit-mask which enables or disables the pull-up resistor + * for each IO line in the expander. Setting the bit at + * position n will enable the pull-up for the IO at + * the corresponding offset. For chips with fewer than + * 16 IO pins, high-end bits are ignored. + * @io_pulldn_ena: A bit-mask which enables-or disables the pull-down + * resistor for each IO line in the expander. Setting the + * bit at position n will enable the pull-down for the IO at + * the corresponding offset. For chips with fewer than + * 16 IO pins, high-end bits are ignored. + * @io_open_drain_ena: A bit-mask which enables-or disables open-drain + * operation for each IO line in the expander. Setting the + * bit at position n enables open-drain operation for + * the IO at the corresponding offset. Clearing the bit + * enables regular push-pull operation for that IO. + * For chips with fewer than 16 IO pins, high-end bits + * are ignored. + * @io_polarity: A bit-mask which enables polarity inversion for each IO line + * in the expander. Setting the bit at position n inverts + * the polarity of that IO line, while clearing it results + * in normal polarity. For chips with fewer than 16 IO pins, + * high-end bits are ignored. + * @irq_summary: The 'summary IRQ' line to which the GPIO expander's INT line + * is connected, via which it reports interrupt events + * across all GPIO lines. This must be a real, + * pre-existing IRQ line. + * Setting this value < 0 disables the irq_chip functionality + * of the driver. + * @irq_base: The first 'virtual IRQ' line at which our block of GPIO-based + * IRQ lines will appear. Similarly to gpio_base, the expander + * will create a block of irqs beginning at this number. + * This value is ignored if irq_summary is < 0. + */ +struct sx150x_platform_data { + unsigned gpio_base; + bool oscio_is_gpo; + u16 io_pullup_ena; + u16 io_pulldn_ena; + u16 io_open_drain_ena; + u16 io_polarity; + int irq_summary; + unsigned irq_base; +}; + +#endif /* __LINUX_I2C_SX150X_H */ |