diff options
Diffstat (limited to 'include/linux/mfd/abx500')
| -rw-r--r-- | include/linux/mfd/abx500/ab8500-bm.h | 61 | ||||
| -rw-r--r-- | include/linux/mfd/abx500/ab8500-gpadc.h | 74 | ||||
| -rw-r--r-- | include/linux/mfd/abx500/ab8500-sysctrl.h | 6 | ||||
| -rw-r--r-- | include/linux/mfd/abx500/ab8500.h | 3 | ||||
| -rw-r--r-- | include/linux/mfd/abx500/ux500_chargalg.h | 7 |
5 files changed, 129 insertions, 22 deletions
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h index 8d35bfe164c8..cc892a8d8d6e 100644 --- a/include/linux/mfd/abx500/ab8500-bm.h +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -23,6 +23,7 @@ * Bank : 0x5 */ #define AB8500_USB_LINE_STAT_REG 0x80 +#define AB8500_USB_LINE_CTRL2_REG 0x82 #define AB8500_USB_LINK1_STAT_REG 0x94 /* @@ -33,7 +34,7 @@ #define AB8500_CH_STATUS2_REG 0x01 #define AB8500_CH_USBCH_STAT1_REG 0x02 #define AB8500_CH_USBCH_STAT2_REG 0x03 -#define AB8500_CH_FSM_STAT_REG 0x04 +#define AB8540_CH_USBCH_STAT3_REG 0x04 #define AB8500_CH_STAT_REG 0x05 /* @@ -69,6 +70,8 @@ #define AB8500_USBCH_CTRL1_REG 0xC0 #define AB8500_USBCH_CTRL2_REG 0xC1 #define AB8500_USBCH_IPT_CRNTLVL_REG 0xC2 +#define AB8540_USB_PP_MODE_REG 0xC5 +#define AB8540_USB_PP_CHR_REG 0xC6 /* * Gas Gauge register offsets @@ -105,6 +108,7 @@ #define AB8500_RTC_BACKUP_CHG_REG 0x0C #define AB8500_RTC_CC_CONF_REG 0x01 #define AB8500_RTC_CTRL_REG 0x0B +#define AB8500_RTC_CTRL1_REG 0x11 /* * OTP register offsets @@ -154,6 +158,7 @@ #define CH_OP_CUR_LVL_1P4 0x0D #define CH_OP_CUR_LVL_1P5 0x0E #define CH_OP_CUR_LVL_1P6 0x0F +#define CH_OP_CUR_LVL_2P 0x3F /* BTEMP High thermal limits */ #define BTEMP_HIGH_TH_57_0 0x00 @@ -179,10 +184,25 @@ #define BUP_ICH_SEL_300UA 0x08 #define BUP_ICH_SEL_700UA 0x0C -#define BUP_VCH_SEL_2P5V 0x00 -#define BUP_VCH_SEL_2P6V 0x01 -#define BUP_VCH_SEL_2P8V 0x02 -#define BUP_VCH_SEL_3P1V 0x03 +enum bup_vch_sel { + BUP_VCH_SEL_2P5V, + BUP_VCH_SEL_2P6V, + BUP_VCH_SEL_2P8V, + BUP_VCH_SEL_3P1V, + /* + * Note that the following 5 values 2.7v, 2.9v, 3.0v, 3.2v, 3.3v + * are only available on ab8540. You can't choose these 5 + * voltage on ab8500/ab8505/ab9540. + */ + BUP_VCH_SEL_2P7V, + BUP_VCH_SEL_2P9V, + BUP_VCH_SEL_3P0V, + BUP_VCH_SEL_3P2V, + BUP_VCH_SEL_3P3V, +}; + +#define BUP_VCH_RANGE 0x02 +#define VBUP33_VRTCN 0x01 /* Battery OVV constants */ #define BATT_OVV_ENA 0x02 @@ -228,6 +248,8 @@ #define BAT_CTRL_20U_ENA 0x02 #define BAT_CTRL_18U_ENA 0x01 #define BAT_CTRL_16U_ENA 0x02 +#define BAT_CTRL_60U_ENA 0x01 +#define BAT_CTRL_120U_ENA 0x02 #define BAT_CTRL_CMP_ENA 0x04 #define FORCE_BAT_CTRL_CMP_HIGH 0x08 #define BAT_CTRL_PULL_UP_ENA 0x10 @@ -235,6 +257,24 @@ /* Battery type */ #define BATTERY_UNKNOWN 00 +/* Registers for pcut feature in ab8505 and ab9540 */ +#define AB8505_RTC_PCUT_CTL_STATUS_REG 0x12 +#define AB8505_RTC_PCUT_TIME_REG 0x13 +#define AB8505_RTC_PCUT_MAX_TIME_REG 0x14 +#define AB8505_RTC_PCUT_FLAG_TIME_REG 0x15 +#define AB8505_RTC_PCUT_RESTART_REG 0x16 +#define AB8505_RTC_PCUT_DEBOUNCE_REG 0x17 + +/* USB Power Path constants for ab8540 */ +#define BUS_VSYS_VOL_SELECT_MASK 0x06 +#define BUS_VSYS_VOL_SELECT_3P6V 0x00 +#define BUS_VSYS_VOL_SELECT_3P325V 0x02 +#define BUS_VSYS_VOL_SELECT_3P9V 0x04 +#define BUS_VSYS_VOL_SELECT_4P3V 0x06 +#define BUS_POWER_PATH_MODE_ENA 0x01 +#define BUS_PP_PRECHG_CURRENT_MASK 0x0E +#define BUS_POWER_PATH_PRECHG_ENA 0x01 + /** * struct res_to_temp - defines one point in a temp to res curve. To * be used in battery packs that combines the identification resistor with a @@ -283,6 +323,11 @@ struct ab8500_fg; * points. * @maint_thres This is the threshold where we stop reporting * battery full while in maintenance, in per cent + * @pcut_enable: Enable power cut feature in ab8505 + * @pcut_max_time: Max time threshold + * @pcut_flag_time: Flagtime threshold + * @pcut_max_restart: Max number of restarts + * @pcut_debunce_time: Sets battery debounce time */ struct ab8500_fg_parameters { int recovery_sleep_timer; @@ -299,6 +344,11 @@ struct ab8500_fg_parameters { int battok_raising_th_sel1; int user_cap_limit; int maint_thres; + bool pcut_enable; + u8 pcut_max_time; + u8 pcut_flag_time; + u8 pcut_max_restart; + u8 pcut_debunce_time; }; /** @@ -415,6 +465,7 @@ void ab8500_fg_reinit(void); void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA); struct ab8500_btemp *ab8500_btemp_get(void); int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp); +int ab8500_btemp_get_temp(struct ab8500_btemp *btemp); struct ab8500_fg *ab8500_fg_get(void); int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev); int ab8500_fg_inst_curr_start(struct ab8500_fg *di); diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h index 252966769d93..49ded001049b 100644 --- a/include/linux/mfd/abx500/ab8500-gpadc.h +++ b/include/linux/mfd/abx500/ab8500-gpadc.h @@ -4,32 +4,72 @@ * * Author: Arun R Murthy <arun.murthy@stericsson.com> * Author: Daniel Willerud <daniel.willerud@stericsson.com> + * Author: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> */ #ifndef _AB8500_GPADC_H #define _AB8500_GPADC_H -/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */ -#define BAT_CTRL 0x01 -#define BTEMP_BALL 0x02 -#define MAIN_CHARGER_V 0x03 -#define ACC_DETECT1 0x04 -#define ACC_DETECT2 0x05 -#define ADC_AUX1 0x06 -#define ADC_AUX2 0x07 -#define MAIN_BAT_V 0x08 -#define VBUS_V 0x09 -#define MAIN_CHARGER_C 0x0A -#define USB_CHARGER_C 0x0B -#define BK_BAT_V 0x0C -#define DIE_TEMP 0x0D +/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2 + * and ADCHwSel[4:0] in GPADCCtrl3 ) */ +#define BAT_CTRL 0x01 +#define BTEMP_BALL 0x02 +#define MAIN_CHARGER_V 0x03 +#define ACC_DETECT1 0x04 +#define ACC_DETECT2 0x05 +#define ADC_AUX1 0x06 +#define ADC_AUX2 0x07 +#define MAIN_BAT_V 0x08 +#define VBUS_V 0x09 +#define MAIN_CHARGER_C 0x0A +#define USB_CHARGER_C 0x0B +#define BK_BAT_V 0x0C +#define DIE_TEMP 0x0D +#define USB_ID 0x0E +#define XTAL_TEMP 0x12 +#define VBAT_TRUE_MEAS 0x13 +#define BAT_CTRL_AND_IBAT 0x1C +#define VBAT_MEAS_AND_IBAT 0x1D +#define VBAT_TRUE_MEAS_AND_IBAT 0x1E +#define BAT_TEMP_AND_IBAT 0x1F + +/* Virtual channel used only for ibat convertion to ampere + * Battery current conversion (ibat) cannot be requested as a single conversion + * but it is always in combination with other input requests + */ +#define IBAT_VIRTUAL_CHANNEL 0xFF + +#define SAMPLE_1 1 +#define SAMPLE_4 4 +#define SAMPLE_8 8 +#define SAMPLE_16 16 +#define RISING_EDGE 0 +#define FALLING_EDGE 1 + +/* Arbitrary ADC conversion type constants */ +#define ADC_SW 0 +#define ADC_HW 1 struct ab8500_gpadc; struct ab8500_gpadc *ab8500_gpadc_get(char *name); -int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel); -int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel); +int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type); +static inline int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel) +{ + return ab8500_gpadc_sw_hw_convert(gpadc, channel, + SAMPLE_16, 0, 0, ADC_SW); +} + +int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type); +int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type, + int *ibat); int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, - u8 channel, int ad_value); + u8 channel, int ad_value); +void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc, + u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h, + u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h); #endif /* _AB8500_GPADC_H */ diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h index ebf12e793db9..990bc93f46e1 100644 --- a/include/linux/mfd/abx500/ab8500-sysctrl.h +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -12,6 +12,7 @@ int ab8500_sysctrl_read(u16 reg, u8 *value); int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value); +void ab8500_restart(char mode, const char *cmd); #else @@ -40,6 +41,7 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) /* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */ struct ab8500_sysctrl_platform_data { u8 initial_req_buf_config[8]; + u16 (*reboot_reason_code)(const char *cmd); }; /* Registers */ @@ -299,4 +301,8 @@ struct ab8500_sysctrl_platform_data { #define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF #define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0 +#define AB8500_ENABLE_WD 0x1 +#define AB8500_KICK_WD 0x2 +#define AB8500_WD_RESTART_ON_EXPIRE 0x10 + #endif /* __AB8500_SYSCTRL_H */ diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 84f449475c25..fb1bf7d6a410 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -362,6 +362,7 @@ struct ab8500 { u8 *oldmask; int mask_size; const int *irq_reg_offset; + int it_latchhier_num; }; struct ab8500_regulator_platform_data; @@ -505,6 +506,8 @@ static inline int is_ab9540_2p0_or_earlier(struct ab8500 *ab) return (is_ab9540(ab) && (ab->chip_id < AB8500_CUT2P0)); } +void ab8500_override_turn_on_stat(u8 mask, u8 set); + #ifdef CONFIG_AB8500_DEBUG void ab8500_dump_all_banks(struct device *dev); void ab8500_debug_register_interrupt(int line); diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h index d43ac0f35526..234c99143bf7 100644 --- a/include/linux/mfd/abx500/ux500_chargalg.h +++ b/include/linux/mfd/abx500/ux500_chargalg.h @@ -17,8 +17,11 @@ struct ux500_charger; struct ux500_charger_ops { int (*enable) (struct ux500_charger *, int, int, int); + int (*check_enable) (struct ux500_charger *, int, int); int (*kick_wd) (struct ux500_charger *); int (*update_curr) (struct ux500_charger *, int); + int (*pp_enable) (struct ux500_charger *, bool); + int (*pre_chg_enable) (struct ux500_charger *, bool); }; /** @@ -29,6 +32,7 @@ struct ux500_charger_ops { * @max_out_curr maximum output charger current in mA * @enabled indicates if this charger is used or not * @external external charger unit (pm2xxx) + * @power_path USB power path support */ struct ux500_charger { struct power_supply psy; @@ -38,6 +42,9 @@ struct ux500_charger { int wdt_refresh; bool enabled; bool external; + bool power_path; }; +extern struct blocking_notifier_head charger_notifier_list; + #endif |