diff options
Diffstat (limited to 'include/linux/nl80211.h')
| -rw-r--r-- | include/linux/nl80211.h | 62 |
1 files changed, 58 insertions, 4 deletions
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index a8d71ed43a0e..da8ea2e19273 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -160,6 +160,11 @@ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, * partial scan results may be available * + * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation + * or noise level + * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to + * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) + * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain * has been changed and provides details of the request information * that caused the change such as who initiated the regulatory request @@ -341,6 +346,13 @@ enum nl80211_commands { NL80211_CMD_SET_WIPHY_NETNS, + NL80211_CMD_GET_SURVEY, + NL80211_CMD_NEW_SURVEY_RESULTS, + + NL80211_CMD_SET_PMKSA, + NL80211_CMD_DEL_PMKSA, + NL80211_CMD_FLUSH_PMKSA, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -584,6 +596,16 @@ enum nl80211_commands { * changed then the list changed and the dump should be repeated * completely from scratch. * + * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface + * + * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of + * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute + * containing info as possible, see &enum survey_info. + * + * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. + * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can + * cache, a wiphy attribute. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -714,6 +736,13 @@ enum nl80211_attrs { NL80211_ATTR_PID, + NL80211_ATTR_4ADDR, + + NL80211_ATTR_SURVEY_INFO, + + NL80211_ATTR_PMKID, + NL80211_ATTR_MAX_NUM_PMKIDS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -895,14 +924,14 @@ enum nl80211_sta_info { * * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running - * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN + * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded */ enum nl80211_mpath_flags { NL80211_MPATH_FLAG_ACTIVE = 1<<0, NL80211_MPATH_FLAG_RESOLVING = 1<<1, - NL80211_MPATH_FLAG_DSN_VALID = 1<<2, + NL80211_MPATH_FLAG_SN_VALID = 1<<2, NL80211_MPATH_FLAG_FIXED = 1<<3, NL80211_MPATH_FLAG_RESOLVED = 1<<4, }; @@ -915,7 +944,7 @@ enum nl80211_mpath_flags { * * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination - * @NL80211_ATTR_MPATH_DSN: destination sequence number + * @NL80211_ATTR_MPATH_SN: destination sequence number * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in @@ -926,7 +955,7 @@ enum nl80211_mpath_flags { enum nl80211_mpath_info { __NL80211_MPATH_INFO_INVALID, NL80211_MPATH_INFO_FRAME_QLEN, - NL80211_MPATH_INFO_DSN, + NL80211_MPATH_INFO_SN, NL80211_MPATH_INFO_METRIC, NL80211_MPATH_INFO_EXPTIME, NL80211_MPATH_INFO_FLAGS, @@ -1117,6 +1146,26 @@ enum nl80211_reg_rule_flags { }; /** + * enum nl80211_survey_info - survey information + * + * These attribute types are used with %NL80211_ATTR_SURVEY_INFO + * when getting information about a survey. + * + * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved + * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel + * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) + */ +enum nl80211_survey_info { + __NL80211_SURVEY_INFO_INVALID, + NL80211_SURVEY_INFO_FREQUENCY, + NL80211_SURVEY_INFO_NOISE, + + /* keep last */ + __NL80211_SURVEY_INFO_AFTER_LAST, + NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 +}; + +/** * enum nl80211_mntr_flags - monitor configuration flags * * Monitor configuration flags. @@ -1196,6 +1245,8 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) * that it takes for an HWMP information element to propagate across the mesh * + * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not + * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use @@ -1215,6 +1266,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + NL80211_MESHCONF_HWMP_ROOTMODE, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -1277,6 +1329,7 @@ enum nl80211_channel_type { * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon * in unspecified units, scaled to 0..100 (u8) * @NL80211_BSS_STATUS: status, if this BSS is "used" + * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -1291,6 +1344,7 @@ enum nl80211_bss { NL80211_BSS_SIGNAL_MBM, NL80211_BSS_SIGNAL_UNSPEC, NL80211_BSS_STATUS, + NL80211_BSS_SEEN_MS_AGO, /* keep last */ __NL80211_BSS_AFTER_LAST, |