diff options
Diffstat (limited to 'include/linux/phy.h')
| -rw-r--r-- | include/linux/phy.h | 61 |
1 files changed, 41 insertions, 20 deletions
diff --git a/include/linux/phy.h b/include/linux/phy.h index 5e43ae751412..779cbcd65f62 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -39,7 +39,8 @@ SUPPORTED_1000baseT_Half | \ SUPPORTED_1000baseT_Full) -/* Set phydev->irq to PHY_POLL if interrupts are not supported, +/* + * Set phydev->irq to PHY_POLL if interrupts are not supported, * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if * the attached driver handles the interrupt */ @@ -63,8 +64,6 @@ typedef enum { PHY_INTERFACE_MODE_RTBI } phy_interface_t; -#define MII_BUS_MAX 4 - #define PHY_INIT_TIMEOUT 100000 #define PHY_STATE_TIME 1 @@ -74,20 +73,30 @@ typedef enum { #define PHY_MAX_ADDR 32 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ -#define PHY_ID_FMT "%x:%02x" +#define PHY_ID_FMT "%s:%02x" -/* The Bus class for PHYs. Devices which provide access to - * PHYs should register using this structure */ +/* + * Need to be a little smaller than phydev->dev.bus_id to leave room + * for the ":%02x" + */ +#define MII_BUS_ID_SIZE (BUS_ID_SIZE - 3) + +/* + * The Bus class for PHYs. Devices which provide access to + * PHYs should register using this structure + */ struct mii_bus { const char *name; - int id; + char id[MII_BUS_ID_SIZE]; void *priv; int (*read)(struct mii_bus *bus, int phy_id, int regnum); int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val); int (*reset)(struct mii_bus *bus); - /* A lock to ensure that only one thing can read/write - * the MDIO bus at a time */ + /* + * A lock to ensure that only one thing can read/write + * the MDIO bus at a time + */ struct mutex mdio_lock; struct device *dev; @@ -98,8 +107,10 @@ struct mii_bus { /* Phy addresses to be ignored when probing */ u32 phy_mask; - /* Pointer to an array of interrupts, each PHY's - * interrupt at the index matching its address */ + /* + * Pointer to an array of interrupts, each PHY's + * interrupt at the index matching its address + */ int *irq; }; @@ -251,7 +262,8 @@ struct phy_device { /* Bus address of the PHY (0-32) */ int addr; - /* forced speed & duplex (no autoneg) + /* + * forced speed & duplex (no autoneg) * partner speed & duplex & pause (autoneg) */ int speed; @@ -274,8 +286,10 @@ struct phy_device { int link_timeout; - /* Interrupt number for this PHY - * -1 means no interrupt */ + /* + * Interrupt number for this PHY + * -1 means no interrupt + */ int irq; /* private data pointer */ @@ -325,22 +339,28 @@ struct phy_driver { u32 features; u32 flags; - /* Called to initialize the PHY, - * including after a reset */ + /* + * Called to initialize the PHY, + * including after a reset + */ int (*config_init)(struct phy_device *phydev); - /* Called during discovery. Used to set - * up device-specific structures, if any */ + /* + * Called during discovery. Used to set + * up device-specific structures, if any + */ int (*probe)(struct phy_device *phydev); /* PHY Power Management */ int (*suspend)(struct phy_device *phydev); int (*resume)(struct phy_device *phydev); - /* Configures the advertisement and resets + /* + * Configures the advertisement and resets * autonegotiation if phydev->autoneg is on, * forces the speed to the current settings in phydev - * if phydev->autoneg is off */ + * if phydev->autoneg is off + */ int (*config_aneg)(struct phy_device *phydev); /* Determines the negotiated speed and duplex */ @@ -361,6 +381,7 @@ struct phy_driver { int phy_read(struct phy_device *phydev, u16 regnum); int phy_write(struct phy_device *phydev, u16 regnum, u16 val); +int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id); struct phy_device* get_phy_device(struct mii_bus *bus, int addr); int phy_clear_interrupt(struct phy_device *phydev); int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); |