diff options
Diffstat (limited to 'include/linux/rio_regs.h')
| -rw-r--r-- | include/linux/rio_regs.h | 80 |
1 files changed, 75 insertions, 5 deletions
diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h index 326540f9b54e..aedee0489fb4 100644 --- a/include/linux/rio_regs.h +++ b/include/linux/rio_regs.h @@ -39,6 +39,8 @@ #define RIO_PEF_INB_MBOX2 0x00200000 /* [II] Mailbox 2 */ #define RIO_PEF_INB_MBOX3 0x00100000 /* [II] Mailbox 3 */ #define RIO_PEF_INB_DOORBELL 0x00080000 /* [II] Doorbells */ +#define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */ +#define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */ #define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */ #define RIO_PEF_EXT_FEATURES 0x00000008 /* [I] EFT_PTR valid */ #define RIO_PEF_ADDR_66 0x00000004 /* [I] 66 bits */ @@ -91,7 +93,10 @@ #define RIO_OPS_ATOMIC_CLR 0x00000010 /* [I] Atomic clr op */ #define RIO_OPS_PORT_WRITE 0x00000004 /* [I] Port-write op */ - /* 0x20-0x3c *//* Reserved */ + /* 0x20-0x30 *//* Reserved */ + +#define RIO_SWITCH_RT_LIMIT 0x34 /* [III, 1.3] Switch Route Table Destination ID Limit CAR */ +#define RIO_RT_MAX_DESTID 0x0000ffff #define RIO_MBOX_CSR 0x40 /* [II] Mailbox CSR */ #define RIO_MBOX0_AVAIL 0x80000000 /* [II] Mbox 0 avail */ @@ -153,7 +158,11 @@ #define RIO_HOST_DID_LOCK_CSR 0x68 /* [III] Host Base Device ID Lock CSR */ #define RIO_COMPONENT_TAG_CSR 0x6c /* [III] Component Tag CSR */ - /* 0x70-0xf8 *//* Reserved */ +#define RIO_STD_RTE_CONF_DESTID_SEL_CSR 0x70 +#define RIO_STD_RTE_CONF_PORT_SEL_CSR 0x74 +#define RIO_STD_RTE_DEFAULT_PORT 0x78 + + /* 0x7c-0xf8 *//* Reserved */ /* 0x100-0xfff8 *//* [I] Extended Features Space */ /* 0x10000-0xfffff8 *//* [I] Implementation-defined Space */ @@ -183,9 +192,14 @@ #define RIO_EFB_PAR_EP_ID 0x0001 /* [IV] LP/LVDS EP Devices */ #define RIO_EFB_PAR_EP_REC_ID 0x0002 /* [IV] LP/LVDS EP Recovery Devices */ #define RIO_EFB_PAR_EP_FREE_ID 0x0003 /* [IV] LP/LVDS EP Free Devices */ +#define RIO_EFB_SER_EP_ID_V13P 0x0001 /* [VI] LP/Serial EP Devices, RapidIO Spec ver 1.3 and above */ +#define RIO_EFB_SER_EP_REC_ID_V13P 0x0002 /* [VI] LP/Serial EP Recovery Devices, RapidIO Spec ver 1.3 and above */ +#define RIO_EFB_SER_EP_FREE_ID_V13P 0x0003 /* [VI] LP/Serial EP Free Devices, RapidIO Spec ver 1.3 and above */ #define RIO_EFB_SER_EP_ID 0x0004 /* [VI] LP/Serial EP Devices */ #define RIO_EFB_SER_EP_REC_ID 0x0005 /* [VI] LP/Serial EP Recovery Devices */ #define RIO_EFB_SER_EP_FREE_ID 0x0006 /* [VI] LP/Serial EP Free Devices */ +#define RIO_EFB_SER_EP_FREC_ID 0x0009 /* [VI] LP/Serial EP Free Recovery Devices */ +#define RIO_EFB_ERR_MGMNT 0x0007 /* [VIII] Error Management Extensions */ /* * Physical 8/16 LP-LVDS @@ -201,15 +215,71 @@ #define RIO_PORT_MNT_HEADER 0x0000 #define RIO_PORT_REQ_CTL_CSR 0x0020 #define RIO_PORT_RSP_CTL_CSR 0x0024 /* 0x0001/0x0002 */ +#define RIO_PORT_LINKTO_CTL_CSR 0x0020 /* Serial */ +#define RIO_PORT_RSPTO_CTL_CSR 0x0024 /* Serial */ #define RIO_PORT_GEN_CTL_CSR 0x003c #define RIO_PORT_GEN_HOST 0x80000000 #define RIO_PORT_GEN_MASTER 0x40000000 #define RIO_PORT_GEN_DISCOVERED 0x20000000 #define RIO_PORT_N_MNT_REQ_CSR(x) (0x0040 + x*0x20) /* 0x0002 */ #define RIO_PORT_N_MNT_RSP_CSR(x) (0x0044 + x*0x20) /* 0x0002 */ +#define RIO_PORT_N_MNT_RSP_RVAL 0x80000000 /* Response Valid */ +#define RIO_PORT_N_MNT_RSP_ASTAT 0x000003e0 /* ackID Status */ +#define RIO_PORT_N_MNT_RSP_LSTAT 0x0000001f /* Link Status */ #define RIO_PORT_N_ACK_STS_CSR(x) (0x0048 + x*0x20) /* 0x0002 */ -#define RIO_PORT_N_ERR_STS_CSR(x) (0x58 + x*0x20) -#define PORT_N_ERR_STS_PORT_OK 0x00000002 -#define RIO_PORT_N_CTL_CSR(x) (0x5c + x*0x20) +#define RIO_PORT_N_ACK_CLEAR 0x80000000 +#define RIO_PORT_N_ACK_INBOUND 0x1f000000 +#define RIO_PORT_N_ACK_OUTSTAND 0x00001f00 +#define RIO_PORT_N_ACK_OUTBOUND 0x0000001f +#define RIO_PORT_N_ERR_STS_CSR(x) (0x0058 + x*0x20) +#define RIO_PORT_N_ERR_STS_PW_OUT_ES 0x00010000 /* Output Error-stopped */ +#define RIO_PORT_N_ERR_STS_PW_INP_ES 0x00000100 /* Input Error-stopped */ +#define RIO_PORT_N_ERR_STS_PW_PEND 0x00000010 /* Port-Write Pending */ +#define RIO_PORT_N_ERR_STS_PORT_ERR 0x00000004 +#define RIO_PORT_N_ERR_STS_PORT_OK 0x00000002 +#define RIO_PORT_N_ERR_STS_PORT_UNINIT 0x00000001 +#define RIO_PORT_N_ERR_STS_CLR_MASK 0x07120204 +#define RIO_PORT_N_CTL_CSR(x) (0x005c + x*0x20) +#define RIO_PORT_N_CTL_PWIDTH 0xc0000000 +#define RIO_PORT_N_CTL_PWIDTH_1 0x00000000 +#define RIO_PORT_N_CTL_PWIDTH_4 0x40000000 +#define RIO_PORT_N_CTL_P_TYP_SER 0x00000001 +#define RIO_PORT_N_CTL_LOCKOUT 0x00000002 +#define RIO_PORT_N_CTL_EN_RX_SER 0x00200000 +#define RIO_PORT_N_CTL_EN_TX_SER 0x00400000 +#define RIO_PORT_N_CTL_EN_RX_PAR 0x08000000 +#define RIO_PORT_N_CTL_EN_TX_PAR 0x40000000 + +/* + * Error Management Extensions (RapidIO 1.3+, Part 8) + * + * Extended Features Block ID=0x0007 + */ + +/* General EM Registers (Common for all Ports) */ + +#define RIO_EM_EFB_HEADER 0x000 /* Error Management Extensions Block Header */ +#define RIO_EM_LTL_ERR_DETECT 0x008 /* Logical/Transport Layer Error Detect CSR */ +#define RIO_EM_LTL_ERR_EN 0x00c /* Logical/Transport Layer Error Enable CSR */ +#define RIO_EM_LTL_HIADDR_CAP 0x010 /* Logical/Transport Layer High Address Capture CSR */ +#define RIO_EM_LTL_ADDR_CAP 0x014 /* Logical/Transport Layer Address Capture CSR */ +#define RIO_EM_LTL_DEVID_CAP 0x018 /* Logical/Transport Layer Device ID Capture CSR */ +#define RIO_EM_LTL_CTRL_CAP 0x01c /* Logical/Transport Layer Control Capture CSR */ +#define RIO_EM_PW_TGT_DEVID 0x028 /* Port-write Target deviceID CSR */ +#define RIO_EM_PKT_TTL 0x02c /* Packet Time-to-live CSR */ + +/* Per-Port EM Registers */ + +#define RIO_EM_PN_ERR_DETECT(x) (0x040 + x*0x40) /* Port N Error Detect CSR */ +#define REM_PED_IMPL_SPEC 0x80000000 +#define REM_PED_LINK_TO 0x00000001 +#define RIO_EM_PN_ERRRATE_EN(x) (0x044 + x*0x40) /* Port N Error Rate Enable CSR */ +#define RIO_EM_PN_ATTRIB_CAP(x) (0x048 + x*0x40) /* Port N Attributes Capture CSR */ +#define RIO_EM_PN_PKT_CAP_0(x) (0x04c + x*0x40) /* Port N Packet/Control Symbol Capture 0 CSR */ +#define RIO_EM_PN_PKT_CAP_1(x) (0x050 + x*0x40) /* Port N Packet Capture 1 CSR */ +#define RIO_EM_PN_PKT_CAP_2(x) (0x054 + x*0x40) /* Port N Packet Capture 2 CSR */ +#define RIO_EM_PN_PKT_CAP_3(x) (0x058 + x*0x40) /* Port N Packet Capture 3 CSR */ +#define RIO_EM_PN_ERRRATE(x) (0x068 + x*0x40) /* Port N Error Rate CSR */ +#define RIO_EM_PN_ERRRATE_TR(x) (0x06c + x*0x40) /* Port N Error Rate Threshold CSR */ #endif /* LINUX_RIO_REGS_H */ |