diff options
Diffstat (limited to 'include/linux/spi')
| -rw-r--r-- | include/linux/spi/mcp23s08.h | 18 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 7 |
2 files changed, 25 insertions, 0 deletions
diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h index 2d676d5aaa89..aa07d7b32568 100644 --- a/include/linux/spi/mcp23s08.h +++ b/include/linux/spi/mcp23s08.h @@ -22,4 +22,22 @@ struct mcp23s08_platform_data { * base to base+15 (or base+31 for s17 variant). */ unsigned base; + /* Marks the device as a interrupt controller. + * NOTE: The interrupt functionality is only supported for i2c + * versions of the chips. The spi chips can also do the interrupts, + * but this is not supported by the linux driver yet. + */ + bool irq_controller; + + /* Sets the mirror flag in the IOCON register. Devices + * with two interrupt outputs (these are the devices ending with 17 and + * those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and + * IO 8-15 are bank 2. These chips have two different interrupt outputs: + * One for bank 1 and another for bank 2. If irq-mirror is set, both + * interrupts are generated regardless of the bank that an input change + * occurred on. If it is not set, the interrupt are only generated for + * the bank they belong to. + * On devices with only one interrupt output this property is useless. + */ + bool mirror; }; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index e713543336f1..46d188a9947c 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -253,6 +253,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * the device whose settings are being modified. * @transfer: adds a message to the controller's transfer queue. * @cleanup: frees controller-specific state + * @can_dma: determine whether this master supports DMA * @queued: whether this master is providing an internal message queue * @kworker: thread struct for message pump * @kworker_task: pointer to task for message pump kworker thread @@ -262,6 +263,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @cur_msg: the currently in-flight message * @cur_msg_prepared: spi_prepare_message was called for the currently * in-flight message + * @cur_msg_mapped: message has been mapped for DMA * @xfer_completion: used by core transfer_one_message() * @busy: message pump is busy * @running: message pump is running @@ -299,6 +301,10 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). + * @dma_tx: DMA transmit channel + * @dma_rx: DMA receive channel + * @dummy_rx: dummy receive buffer for full-duplex devices + * @dummy_tx: dummy transmit buffer for full-duplex devices * * Each SPI master controller can communicate with one or more @spi_device * children. These make a small bus, sharing MOSI, MISO and SCK signals @@ -632,6 +638,7 @@ struct spi_transfer { * addresses for each transfer buffer * @complete: called to report transaction completions * @context: the argument to complete() when it's called + * @frame_length: the total number of bytes in the message * @actual_length: the total number of bytes that were transferred in all * successful segments * @status: zero for success, else negative errno |