summaryrefslogtreecommitdiff
path: root/include/linux/usb/ch9.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/usb/ch9.h')
-rw-r--r--include/linux/usb/ch9.h960
1 files changed, 1 insertions, 959 deletions
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index d1d732c2838d..9c210f2283df 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -29,887 +29,11 @@
* someone that the two other points are non-issues for that
* particular descriptor type.
*/
-
#ifndef __LINUX_USB_CH9_H
#define __LINUX_USB_CH9_H
-#include <linux/types.h> /* __u8 etc */
-#include <asm/byteorder.h> /* le16_to_cpu */
-
-/*-------------------------------------------------------------------------*/
-
-/* CONTROL REQUEST SUPPORT */
-
-/*
- * USB directions
- *
- * This bit flag is used in endpoint descriptors' bEndpointAddress field.
- * It's also one of three fields in control requests bRequestType.
- */
-#define USB_DIR_OUT 0 /* to device */
-#define USB_DIR_IN 0x80 /* to host */
-
-/*
- * USB types, the second of three bRequestType fields
- */
-#define USB_TYPE_MASK (0x03 << 5)
-#define USB_TYPE_STANDARD (0x00 << 5)
-#define USB_TYPE_CLASS (0x01 << 5)
-#define USB_TYPE_VENDOR (0x02 << 5)
-#define USB_TYPE_RESERVED (0x03 << 5)
-
-/*
- * USB recipients, the third of three bRequestType fields
- */
-#define USB_RECIP_MASK 0x1f
-#define USB_RECIP_DEVICE 0x00
-#define USB_RECIP_INTERFACE 0x01
-#define USB_RECIP_ENDPOINT 0x02
-#define USB_RECIP_OTHER 0x03
-/* From Wireless USB 1.0 */
-#define USB_RECIP_PORT 0x04
-#define USB_RECIP_RPIPE 0x05
-
-/*
- * Standard requests, for the bRequest field of a SETUP packet.
- *
- * These are qualified by the bRequestType field, so that for example
- * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
- * by a GET_STATUS request.
- */
-#define USB_REQ_GET_STATUS 0x00
-#define USB_REQ_CLEAR_FEATURE 0x01
-#define USB_REQ_SET_FEATURE 0x03
-#define USB_REQ_SET_ADDRESS 0x05
-#define USB_REQ_GET_DESCRIPTOR 0x06
-#define USB_REQ_SET_DESCRIPTOR 0x07
-#define USB_REQ_GET_CONFIGURATION 0x08
-#define USB_REQ_SET_CONFIGURATION 0x09
-#define USB_REQ_GET_INTERFACE 0x0A
-#define USB_REQ_SET_INTERFACE 0x0B
-#define USB_REQ_SYNCH_FRAME 0x0C
-#define USB_REQ_SET_SEL 0x30
-#define USB_REQ_SET_ISOCH_DELAY 0x31
-
-#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
-#define USB_REQ_GET_ENCRYPTION 0x0E
-#define USB_REQ_RPIPE_ABORT 0x0E
-#define USB_REQ_SET_HANDSHAKE 0x0F
-#define USB_REQ_RPIPE_RESET 0x0F
-#define USB_REQ_GET_HANDSHAKE 0x10
-#define USB_REQ_SET_CONNECTION 0x11
-#define USB_REQ_SET_SECURITY_DATA 0x12
-#define USB_REQ_GET_SECURITY_DATA 0x13
-#define USB_REQ_SET_WUSB_DATA 0x14
-#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
-#define USB_REQ_LOOPBACK_DATA_READ 0x16
-#define USB_REQ_SET_INTERFACE_DS 0x17
-
-/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
- * used by hubs to put ports into a new L1 suspend state, except that it
- * forgot to define its number ...
- */
-
-/*
- * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
- * are read as a bit array returned by USB_REQ_GET_STATUS. (So there
- * are at most sixteen features of each type.) Hubs may also support a
- * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
- */
-#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
-#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
-#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
-#define USB_DEVICE_BATTERY 2 /* (wireless) */
-#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
-#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
-#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
-#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
-#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
-
-/*
- * Test Mode Selectors
- * See USB 2.0 spec Table 9-7
- */
-#define TEST_J 1
-#define TEST_K 2
-#define TEST_SE0_NAK 3
-#define TEST_PACKET 4
-#define TEST_FORCE_EN 5
-
-/*
- * New Feature Selectors as added by USB 3.0
- * See USB 3.0 spec Table 9-6
- */
-#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */
-#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */
-#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */
-#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */
-
-#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00
-/*
- * Suspend Options, Table 9-7 USB 3.0 spec
- */
-#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0))
-#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1))
-
-#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
-
-/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
-#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */
-#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */
-#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */
-
-/**
- * struct usb_ctrlrequest - SETUP data for a USB device control request
- * @bRequestType: matches the USB bmRequestType field
- * @bRequest: matches the USB bRequest field
- * @wValue: matches the USB wValue field (le16 byte order)
- * @wIndex: matches the USB wIndex field (le16 byte order)
- * @wLength: matches the USB wLength field (le16 byte order)
- *
- * This structure is used to send control requests to a USB device. It matches
- * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the
- * USB spec for a fuller description of the different fields, and what they are
- * used for.
- *
- * Note that the driver for any interface can issue control requests.
- * For most devices, interfaces don't coordinate with each other, so
- * such requests may be made at any time.
- */
-struct usb_ctrlrequest {
- __u8 bRequestType;
- __u8 bRequest;
- __le16 wValue;
- __le16 wIndex;
- __le16 wLength;
-} __attribute__ ((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
- * (rarely) accepted by SET_DESCRIPTOR.
- *
- * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire". Within the kernel and when exposed
- * through the Linux-USB APIs, they are not converted to cpu byte
- * order; it is the responsibility of the client code to do this.
- * The single exception is when device and configuration descriptors (but
- * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
- * in this case the fields are converted to host endianness by the kernel.
- */
-
-/*
- * Descriptor types ... USB 2.0 spec table 9.5
- */
-#define USB_DT_DEVICE 0x01
-#define USB_DT_CONFIG 0x02
-#define USB_DT_STRING 0x03
-#define USB_DT_INTERFACE 0x04
-#define USB_DT_ENDPOINT 0x05
-#define USB_DT_DEVICE_QUALIFIER 0x06
-#define USB_DT_OTHER_SPEED_CONFIG 0x07
-#define USB_DT_INTERFACE_POWER 0x08
-/* these are from a minor usb 2.0 revision (ECN) */
-#define USB_DT_OTG 0x09
-#define USB_DT_DEBUG 0x0a
-#define USB_DT_INTERFACE_ASSOCIATION 0x0b
-/* these are from the Wireless USB spec */
-#define USB_DT_SECURITY 0x0c
-#define USB_DT_KEY 0x0d
-#define USB_DT_ENCRYPTION_TYPE 0x0e
-#define USB_DT_BOS 0x0f
-#define USB_DT_DEVICE_CAPABILITY 0x10
-#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
-#define USB_DT_WIRE_ADAPTER 0x21
-#define USB_DT_RPIPE 0x22
-#define USB_DT_CS_RADIO_CONTROL 0x23
-/* From the T10 UAS specification */
-#define USB_DT_PIPE_USAGE 0x24
-/* From the USB 3.0 spec */
-#define USB_DT_SS_ENDPOINT_COMP 0x30
-
-/* Conventional codes for class-specific descriptors. The convention is
- * defined in the USB "Common Class" Spec (3.11). Individual class specs
- * are authoritative for their usage, not the "common class" writeup.
- */
-#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE)
-#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG)
-#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING)
-#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE)
-#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT)
-
-/* All standard descriptors have these 2 fields at the beginning */
-struct usb_descriptor_header {
- __u8 bLength;
- __u8 bDescriptorType;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE: Device descriptor */
-struct usb_device_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 bcdUSB;
- __u8 bDeviceClass;
- __u8 bDeviceSubClass;
- __u8 bDeviceProtocol;
- __u8 bMaxPacketSize0;
- __le16 idVendor;
- __le16 idProduct;
- __le16 bcdDevice;
- __u8 iManufacturer;
- __u8 iProduct;
- __u8 iSerialNumber;
- __u8 bNumConfigurations;
-} __attribute__ ((packed));
-
-#define USB_DT_DEVICE_SIZE 18
-
-
-/*
- * Device and/or Interface Class codes
- * as found in bDeviceClass or bInterfaceClass
- * and defined by www.usb.org documents
- */
-#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
-#define USB_CLASS_AUDIO 1
-#define USB_CLASS_COMM 2
-#define USB_CLASS_HID 3
-#define USB_CLASS_PHYSICAL 5
-#define USB_CLASS_STILL_IMAGE 6
-#define USB_CLASS_PRINTER 7
-#define USB_CLASS_MASS_STORAGE 8
-#define USB_CLASS_HUB 9
-#define USB_CLASS_CDC_DATA 0x0a
-#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
-#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
-#define USB_CLASS_VIDEO 0x0e
-#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
-#define USB_CLASS_MISC 0xef
-#define USB_CLASS_APP_SPEC 0xfe
-#define USB_CLASS_VENDOR_SPEC 0xff
-
-#define USB_SUBCLASS_VENDOR_SPEC 0xff
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_CONFIG: Configuration descriptor information.
- *
- * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
- * descriptor type is different. Highspeed-capable devices can look
- * different depending on what speed they're currently running. Only
- * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
- * descriptors.
- */
-struct usb_config_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumInterfaces;
- __u8 bConfigurationValue;
- __u8 iConfiguration;
- __u8 bmAttributes;
- __u8 bMaxPower;
-} __attribute__ ((packed));
-
-#define USB_DT_CONFIG_SIZE 9
-
-/* from config descriptor bmAttributes */
-#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
-#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
-#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
-#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_STRING: String descriptor */
-struct usb_string_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wData[1]; /* UTF-16LE encoded */
-} __attribute__ ((packed));
-
-/* note that "string" zero is special, it holds language codes that
- * the device supports, not Unicode characters.
- */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE: Interface descriptor */
-struct usb_interface_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bInterfaceNumber;
- __u8 bAlternateSetting;
- __u8 bNumEndpoints;
- __u8 bInterfaceClass;
- __u8 bInterfaceSubClass;
- __u8 bInterfaceProtocol;
- __u8 iInterface;
-} __attribute__ ((packed));
-
-#define USB_DT_INTERFACE_SIZE 9
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENDPOINT: Endpoint descriptor */
-struct usb_endpoint_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bEndpointAddress;
- __u8 bmAttributes;
- __le16 wMaxPacketSize;
- __u8 bInterval;
-
- /* NOTE: these two are _only_ in audio endpoints. */
- /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
- __u8 bRefresh;
- __u8 bSynchAddress;
-} __attribute__ ((packed));
-
-#define USB_DT_ENDPOINT_SIZE 7
-#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
-
-
-/*
- * Endpoints
- */
-#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
-#define USB_ENDPOINT_DIR_MASK 0x80
-
-#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
-#define USB_ENDPOINT_XFER_CONTROL 0
-#define USB_ENDPOINT_XFER_ISOC 1
-#define USB_ENDPOINT_XFER_BULK 2
-#define USB_ENDPOINT_XFER_INT 3
-#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
-
-/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
-#define USB_ENDPOINT_INTRTYPE 0x30
-#define USB_ENDPOINT_INTR_PERIODIC (0 << 4)
-#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4)
-
-#define USB_ENDPOINT_SYNCTYPE 0x0c
-#define USB_ENDPOINT_SYNC_NONE (0 << 2)
-#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
-#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
-#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
-
-#define USB_ENDPOINT_USAGE_MASK 0x30
-#define USB_ENDPOINT_USAGE_DATA 0x00
-#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
-#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */
-
-/*-------------------------------------------------------------------------*/
-
-/**
- * usb_endpoint_num - get the endpoint's number
- * @epd: endpoint to be checked
- *
- * Returns @epd's number: 0 to 15.
- */
-static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
-{
- return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-}
-
-/**
- * usb_endpoint_type - get the endpoint's transfer type
- * @epd: endpoint to be checked
- *
- * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
- * to @epd's transfer type.
- */
-static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
-{
- return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-}
-
-/**
- * usb_endpoint_dir_in - check if the endpoint has IN direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type IN, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
-}
-
-/**
- * usb_endpoint_dir_out - check if the endpoint has OUT direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type OUT, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
-}
-
-/**
- * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type bulk, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_bulk(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_BULK);
-}
-
-/**
- * usb_endpoint_xfer_control - check if the endpoint has control transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type control, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_control(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_CONTROL);
-}
-
-/**
- * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type interrupt, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_int(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_INT);
-}
-
-/**
- * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type isochronous, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_isoc(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_ISOC);
-}
-
-/**
- * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_in(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_in(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_in(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_maxp - get endpoint's max packet size
- * @epd: endpoint to be checked
- *
- * Returns @epd's max packet
- */
-static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
-{
- return __le16_to_cpu(epd->wMaxPacketSize);
-}
-
-static inline int usb_endpoint_interrupt_type(
- const struct usb_endpoint_descriptor *epd)
-{
- return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
-struct usb_ss_ep_comp_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bMaxBurst;
- __u8 bmAttributes;
- __le16 wBytesPerInterval;
-} __attribute__ ((packed));
-
-#define USB_DT_SS_EP_COMP_SIZE 6
-
-/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
-static inline int
-usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
-{
- int max_streams;
-
- if (!comp)
- return 0;
-
- max_streams = comp->bmAttributes & 0x1f;
-
- if (!max_streams)
- return 0;
-
- max_streams = 1 << max_streams;
-
- return max_streams;
-}
-
-/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
-#define USB_SS_MULT(p) (1 + ((p) & 0x3))
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
-struct usb_qualifier_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 bcdUSB;
- __u8 bDeviceClass;
- __u8 bDeviceSubClass;
- __u8 bDeviceProtocol;
- __u8 bMaxPacketSize0;
- __u8 bNumConfigurations;
- __u8 bRESERVED;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_OTG (from OTG 1.0a supplement) */
-struct usb_otg_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bmAttributes; /* support for HNP, SRP, etc */
-} __attribute__ ((packed));
-
-/* from usb_otg_descriptor.bmAttributes */
-#define USB_OTG_SRP (1 << 0)
-#define USB_OTG_HNP (1 << 1) /* swap host/device roles */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
-struct usb_debug_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- /* bulk endpoints with 8 byte maxpacket */
- __u8 bDebugInEndpoint;
- __u8 bDebugOutEndpoint;
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
-struct usb_interface_assoc_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bFirstInterface;
- __u8 bInterfaceCount;
- __u8 bFunctionClass;
- __u8 bFunctionSubClass;
- __u8 bFunctionProtocol;
- __u8 iFunction;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SECURITY: group of wireless security descriptors, including
- * encryption types available for setting up a CC/association.
- */
-struct usb_security_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumEncryptionTypes;
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys
- * may be retrieved.
- */
-struct usb_key_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 tTKID[3];
- __u8 bReserved;
- __u8 bKeyData[0];
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */
-struct usb_encryption_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bEncryptionType;
-#define USB_ENC_TYPE_UNSECURE 0
-#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */
-#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */
-#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
- __u8 bEncryptionValue; /* use in SET_ENCRYPTION */
- __u8 bAuthKeyIndex;
-} __attribute__((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_BOS: group of device-level capabilities */
-struct usb_bos_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumDeviceCaps;
-} __attribute__((packed));
-
-#define USB_DT_BOS_SIZE 5
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
-struct usb_dev_cap_header {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
-} __attribute__((packed));
-
-#define USB_CAP_TYPE_WIRELESS_USB 1
-
-struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
-
- __u8 bmAttributes;
-#define USB_WIRELESS_P2P_DRD (1 << 1)
-#define USB_WIRELESS_BEACON_MASK (3 << 2)
-#define USB_WIRELESS_BEACON_SELF (1 << 2)
-#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
-#define USB_WIRELESS_BEACON_NONE (3 << 2)
- __le16 wPHYRates; /* bit rates, Mbps */
-#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */
-#define USB_WIRELESS_PHY_80 (1 << 1)
-#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */
-#define USB_WIRELESS_PHY_160 (1 << 3)
-#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */
-#define USB_WIRELESS_PHY_320 (1 << 5)
-#define USB_WIRELESS_PHY_400 (1 << 6)
-#define USB_WIRELESS_PHY_480 (1 << 7)
- __u8 bmTFITXPowerInfo; /* TFI power levels */
- __u8 bmFFITXPowerInfo; /* FFI power levels */
- __le16 bmBandGroup;
- __u8 bReserved;
-} __attribute__((packed));
-
-/* USB 2.0 Extension descriptor */
-#define USB_CAP_TYPE_EXT 2
-
-struct usb_ext_cap_descriptor { /* Link Power Management */
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
- __le32 bmAttributes;
-#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */
-#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */
-#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/
-#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */
-#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8)
-#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12)
-} __attribute__((packed));
-
-#define USB_DT_USB_EXT_CAP_SIZE 7
-
-/*
- * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
- * specific device level capabilities
- */
-#define USB_SS_CAP_TYPE 3
-struct usb_ss_cap_descriptor { /* Link Power Management */
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
- __u8 bmAttributes;
-#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */
- __le16 wSpeedSupported;
-#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */
-#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */
-#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */
-#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */
- __u8 bFunctionalitySupport;
- __u8 bU1devExitLat;
- __le16 bU2DevExitLat;
-} __attribute__((packed));
-
-#define USB_DT_USB_SS_CAP_SIZE 10
-
-/*
- * Container ID Capability descriptor: Defines the instance unique ID used to
- * identify the instance across all operating modes
- */
-#define CONTAINER_ID_TYPE 4
-struct usb_ss_container_id_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
- __u8 bReserved;
- __u8 ContainerID[16]; /* 128-bit number */
-} __attribute__((packed));
-
-#define USB_DT_USB_SS_CONTN_ID_SIZE 20
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
- * each endpoint descriptor for a wireless device
- */
-struct usb_wireless_ep_comp_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bMaxBurst;
- __u8 bMaxSequence;
- __le16 wMaxStreamDelay;
- __le16 wOverTheAirPacketSize;
- __u8 bOverTheAirInterval;
- __u8 bmCompAttributes;
-#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */
-#define USB_ENDPOINT_SWITCH_NO 0
-#define USB_ENDPOINT_SWITCH_SWITCH 1
-#define USB_ENDPOINT_SWITCH_SCALE 2
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
- * host and a device for connection set up, mutual authentication, and
- * exchanging short lived session keys. The handshake depends on a CC.
- */
-struct usb_handshake {
- __u8 bMessageNumber;
- __u8 bStatus;
- __u8 tTKID[3];
- __u8 bReserved;
- __u8 CDID[16];
- __u8 nonce[16];
- __u8 MIC[8];
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
- * A CC may also be set up using non-wireless secure channels (including
- * wired USB!), and some devices may support CCs with multiple hosts.
- */
-struct usb_connection_context {
- __u8 CHID[16]; /* persistent host id */
- __u8 CDID[16]; /* device id (unique w/in host context) */
- __u8 CK[16]; /* connection key */
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
+#include <uapi/linux/usb/ch9.h>
-/* USB 2.0 defines three speeds, here's how Linux identifies them */
-
-enum usb_device_speed {
- USB_SPEED_UNKNOWN = 0, /* enumerating */
- USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
- USB_SPEED_HIGH, /* usb 2.0 */
- USB_SPEED_WIRELESS, /* wireless (usb 2.5) */
- USB_SPEED_SUPER, /* usb 3.0 */
-};
-
-#ifdef __KERNEL__
/**
* usb_speed_string() - Returns human readable-name of the speed.
@@ -919,86 +43,4 @@ enum usb_device_speed {
*/
extern const char *usb_speed_string(enum usb_device_speed speed);
-#endif
-
-enum usb_device_state {
- /* NOTATTACHED isn't in the USB spec, and this state acts
- * the same as ATTACHED ... but it's clearer this way.
- */
- USB_STATE_NOTATTACHED = 0,
-
- /* chapter 9 and authentication (wireless) device states */
- USB_STATE_ATTACHED,
- USB_STATE_POWERED, /* wired */
- USB_STATE_RECONNECTING, /* auth */
- USB_STATE_UNAUTHENTICATED, /* auth */
- USB_STATE_DEFAULT, /* limited function */
- USB_STATE_ADDRESS,
- USB_STATE_CONFIGURED, /* most functions */
-
- USB_STATE_SUSPENDED
-
- /* NOTE: there are actually four different SUSPENDED
- * states, returning to POWERED, DEFAULT, ADDRESS, or
- * CONFIGURED respectively when SOF tokens flow again.
- * At this level there's no difference between L1 and L2
- * suspend states. (L2 being original USB 1.1 suspend.)
- */
-};
-
-enum usb3_link_state {
- USB3_LPM_U0 = 0,
- USB3_LPM_U1,
- USB3_LPM_U2,
- USB3_LPM_U3
-};
-
-/*
- * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
- * 0xff means the parent hub will accept transitions to U1, but will not
- * initiate a transition.
- *
- * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
- * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved
- * values.
- *
- * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
- * 0xff means the parent hub will accept transitions to U2, but will not
- * initiate a transition.
- *
- * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
- * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2
- * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
- * 65.024ms.
- */
-#define USB3_LPM_DISABLED 0x0
-#define USB3_LPM_U1_MAX_TIMEOUT 0x7F
-#define USB3_LPM_U2_MAX_TIMEOUT 0xFE
-#define USB3_LPM_DEVICE_INITIATED 0xFF
-
-struct usb_set_sel_req {
- __u8 u1_sel;
- __u8 u1_pel;
- __le16 u2_sel;
- __le16 u2_pel;
-} __attribute__ ((packed));
-
-/*
- * The Set System Exit Latency control transfer provides one byte each for
- * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each
- * are two bytes long.
- */
-#define USB3_LPM_MAX_U1_SEL_PEL 0xFF
-#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * As per USB compliance update, a device that is actively drawing
- * more than 100mA from USB must report itself as bus-powered in
- * the GetStatus(DEVICE) call.
- * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
- */
-#define USB_SELF_POWER_VBUS_MAX_DRAW 100
-
#endif /* __LINUX_USB_CH9_H */