diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/i2c/twl4030-madc.h | 2 | ||||
| -rw-r--r-- | include/linux/input/matrix_keypad.h | 19 | ||||
| -rw-r--r-- | include/linux/mfd/arizona/pdata.h | 7 | ||||
| -rw-r--r-- | include/linux/mfd/cros_ec.h | 170 | ||||
| -rw-r--r-- | include/linux/mfd/cros_ec_commands.h | 1369 | ||||
| -rw-r--r-- | include/linux/mfd/palmas.h | 12 | ||||
| -rw-r--r-- | include/linux/mfd/retu.h | 8 | ||||
| -rw-r--r-- | include/linux/mfd/rtsx_pci.h | 36 | ||||
| -rw-r--r-- | include/linux/mfd/si476x-core.h | 533 | ||||
| -rw-r--r-- | include/linux/mfd/si476x-platform.h | 267 | ||||
| -rw-r--r-- | include/linux/mfd/si476x-reports.h | 163 | ||||
| -rw-r--r-- | include/linux/mfd/stmpe.h | 3 | ||||
| -rw-r--r-- | include/linux/mfd/syscon.h | 3 | ||||
| -rw-r--r-- | include/linux/mfd/tps65090.h | 1 | ||||
| -rw-r--r-- | include/linux/of.h | 5 | ||||
| -rw-r--r-- | include/linux/ucb1400.h | 18 |
16 files changed, 2601 insertions, 15 deletions
diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h index 530e11ba0738..01f595107048 100644 --- a/include/linux/i2c/twl4030-madc.h +++ b/include/linux/i2c/twl4030-madc.h @@ -39,6 +39,7 @@ struct twl4030_madc_conversion_method { * @do_avgP: sample the input channel for 4 consecutive cycles * @method: RT, SW1, SW2 * @type: Polling or interrupt based method + * @raw: Return raw value, do not convert it */ struct twl4030_madc_request { @@ -48,6 +49,7 @@ struct twl4030_madc_request { u16 type; bool active; bool result_pending; + bool raw; int rbuf[TWL4030_MADC_MAX_CHANNELS]; void (*func_cb)(int len, int channels, int *buf); }; diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index 5f3aa6b11bfa..27e06acc509a 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -81,4 +81,23 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, unsigned short *keymap, struct input_dev *input_dev); +#ifdef CONFIG_OF +/** + * matrix_keypad_parse_of_params() - Read parameters from matrix-keypad node + * + * @dev: Device containing of_node + * @rows: Returns number of matrix rows + * @cols: Returns number of matrix columns + * @return 0 if OK, <0 on error + */ +int matrix_keypad_parse_of_params(struct device *dev, + unsigned int *rows, unsigned int *cols); +#else +static inline int matrix_keypad_parse_of_params(struct device *dev, + unsigned int *rows, unsigned int *cols) +{ + return -ENOSYS; +} +#endif /* CONFIG_OF */ + #endif /* _MATRIX_KEYPAD_H */ diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index a0f940987a3e..80dead1f7100 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -78,6 +78,7 @@ struct arizona_micbias { unsigned int ext_cap:1; /** External capacitor fitted */ unsigned int discharge:1; /** Actively discharge */ unsigned int fast_start:1; /** Enable aggressive startup ramp rate */ + unsigned int bypass:1; /** Use bypass mode */ }; struct arizona_micd_config { @@ -104,7 +105,8 @@ struct arizona_pdata { /** If a direct 32kHz clock is provided on an MCLK specify it here */ int clk32k_src; - bool irq_active_high; /** IRQ polarity */ + /** Mode for primary IRQ (defaults to active low) */ + unsigned int irq_flags; /* Base GPIO */ int gpio_base; @@ -183,6 +185,9 @@ struct arizona_pdata { /** Haptic actuator type */ unsigned int hap_act; + + /** GPIO for primary IRQ (used for edge triggered emulation) */ + int irq_gpio; }; #endif diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h new file mode 100644 index 000000000000..032af7fc5b2e --- /dev/null +++ b/include/linux/mfd/cros_ec.h @@ -0,0 +1,170 @@ +/* + * ChromeOS EC multi-function device + * + * Copyright (C) 2012 Google, Inc + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_MFD_CROS_EC_H +#define __LINUX_MFD_CROS_EC_H + +#include <linux/mfd/cros_ec_commands.h> + +/* + * Command interface between EC and AP, for LPC, I2C and SPI interfaces. + */ +enum { + EC_MSG_TX_HEADER_BYTES = 3, + EC_MSG_TX_TRAILER_BYTES = 1, + EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES + + EC_MSG_TX_TRAILER_BYTES, + EC_MSG_RX_PROTO_BYTES = 3, + + /* Max length of messages */ + EC_MSG_BYTES = EC_HOST_PARAM_SIZE + EC_MSG_TX_PROTO_BYTES, + +}; + +/** + * struct cros_ec_msg - A message sent to the EC, and its reply + * + * @version: Command version number (often 0) + * @cmd: Command to send (EC_CMD_...) + * @out_buf: Outgoing payload (to EC) + * @outlen: Outgoing length + * @in_buf: Incoming payload (from EC) + * @in_len: Incoming length + */ +struct cros_ec_msg { + u8 version; + u8 cmd; + uint8_t *out_buf; + int out_len; + uint8_t *in_buf; + int in_len; +}; + +/** + * struct cros_ec_device - Information about a ChromeOS EC device + * + * @name: Name of this EC interface + * @priv: Private data + * @irq: Interrupt to use + * @din: input buffer (from EC) + * @dout: output buffer (to EC) + * \note + * These two buffers will always be dword-aligned and include enough + * space for up to 7 word-alignment bytes also, so we can ensure that + * the body of the message is always dword-aligned (64-bit). + * + * We use this alignment to keep ARM and x86 happy. Probably word + * alignment would be OK, there might be a small performance advantage + * to using dword. + * @din_size: size of din buffer + * @dout_size: size of dout buffer + * @command_send: send a command + * @command_recv: receive a command + * @ec_name: name of EC device (e.g. 'chromeos-ec') + * @phys_name: name of physical comms layer (e.g. 'i2c-4') + * @parent: pointer to parent device (e.g. i2c or spi device) + * @dev: Device pointer + * dev_lock: Lock to prevent concurrent access + * @wake_enabled: true if this device can wake the system from sleep + * @was_wake_device: true if this device was set to wake the system from + * sleep at the last suspend + * @event_notifier: interrupt event notifier for transport devices + */ +struct cros_ec_device { + const char *name; + void *priv; + int irq; + uint8_t *din; + uint8_t *dout; + int din_size; + int dout_size; + int (*command_send)(struct cros_ec_device *ec, + uint16_t cmd, void *out_buf, int out_len); + int (*command_recv)(struct cros_ec_device *ec, + uint16_t cmd, void *in_buf, int in_len); + int (*command_sendrecv)(struct cros_ec_device *ec, + uint16_t cmd, void *out_buf, int out_len, + void *in_buf, int in_len); + int (*command_xfer)(struct cros_ec_device *ec, + struct cros_ec_msg *msg); + + const char *ec_name; + const char *phys_name; + struct device *parent; + + /* These are --private-- fields - do not assign */ + struct device *dev; + struct mutex dev_lock; + bool wake_enabled; + bool was_wake_device; + struct blocking_notifier_head event_notifier; +}; + +/** + * cros_ec_suspend - Handle a suspend operation for the ChromeOS EC device + * + * This can be called by drivers to handle a suspend event. + * + * ec_dev: Device to suspend + * @return 0 if ok, -ve on error + */ +int cros_ec_suspend(struct cros_ec_device *ec_dev); + +/** + * cros_ec_resume - Handle a resume operation for the ChromeOS EC device + * + * This can be called by drivers to handle a resume event. + * + * @ec_dev: Device to resume + * @return 0 if ok, -ve on error + */ +int cros_ec_resume(struct cros_ec_device *ec_dev); + +/** + * cros_ec_prepare_tx - Prepare an outgoing message in the output buffer + * + * This is intended to be used by all ChromeOS EC drivers, but at present + * only SPI uses it. Once LPC uses the same protocol it can start using it. + * I2C could use it now, with a refactor of the existing code. + * + * @ec_dev: Device to register + * @msg: Message to write + */ +int cros_ec_prepare_tx(struct cros_ec_device *ec_dev, + struct cros_ec_msg *msg); + +/** + * cros_ec_remove - Remove a ChromeOS EC + * + * Call this to deregister a ChromeOS EC. After this you should call + * cros_ec_free(). + * + * @ec_dev: Device to register + * @return 0 if ok, -ve on error + */ +int cros_ec_remove(struct cros_ec_device *ec_dev); + +/** + * cros_ec_register - Register a new ChromeOS EC, using the provided info + * + * Before calling this, allocate a pointer to a new device and then fill + * in all the fields up to the --private-- marker. + * + * @ec_dev: Device to register + * @return 0 if ok, -ve on error + */ +int cros_ec_register(struct cros_ec_device *ec_dev); + +#endif /* __LINUX_MFD_CROS_EC_H */ diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h new file mode 100644 index 000000000000..86fd06953bcd --- /dev/null +++ b/include/linux/mfd/cros_ec_commands.h @@ -0,0 +1,1369 @@ +/* + * Host communication command constants for ChromeOS EC + * + * Copyright (C) 2012 Google, Inc + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * The ChromeOS EC multi function device is used to mux all the requests + * to the EC device for its multiple features: keyboard controller, + * battery charging and regulator control, firmware update. + * + * NOTE: This file is copied verbatim from the ChromeOS EC Open Source + * project in an attempt to make future updates easy to make. + */ + +#ifndef __CROS_EC_COMMANDS_H +#define __CROS_EC_COMMANDS_H + +/* + * Protocol overview + * + * request: CMD [ P0 P1 P2 ... Pn S ] + * response: ERR [ P0 P1 P2 ... Pn S ] + * + * where the bytes are defined as follow : + * - CMD is the command code. (defined by EC_CMD_ constants) + * - ERR is the error code. (defined by EC_RES_ constants) + * - Px is the optional payload. + * it is not sent if the error code is not success. + * (defined by ec_params_ and ec_response_ structures) + * - S is the checksum which is the sum of all payload bytes. + * + * On LPC, CMD and ERR are sent/received at EC_LPC_ADDR_KERNEL|USER_CMD + * and the payloads are sent/received at EC_LPC_ADDR_KERNEL|USER_PARAM. + * On I2C, all bytes are sent serially in the same message. + */ + +/* Current version of this protocol */ +#define EC_PROTO_VERSION 0x00000002 + +/* Command version mask */ +#define EC_VER_MASK(version) (1UL << (version)) + +/* I/O addresses for ACPI commands */ +#define EC_LPC_ADDR_ACPI_DATA 0x62 +#define EC_LPC_ADDR_ACPI_CMD 0x66 + +/* I/O addresses for host command */ +#define EC_LPC_ADDR_HOST_DATA 0x200 +#define EC_LPC_ADDR_HOST_CMD 0x204 + +/* I/O addresses for host command args and params */ +#define EC_LPC_ADDR_HOST_ARGS 0x800 +#define EC_LPC_ADDR_HOST_PARAM 0x804 +#define EC_HOST_PARAM_SIZE 0x0fc /* Size of param area in bytes */ + +/* I/O addresses for host command params, old interface */ +#define EC_LPC_ADDR_OLD_PARAM 0x880 +#define EC_OLD_PARAM_SIZE 0x080 /* Size of param area in bytes */ + +/* EC command register bit functions */ +#define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */ +#define EC_LPC_CMDR_PENDING (1 << 1) /* Write pending to EC */ +#define EC_LPC_CMDR_BUSY (1 << 2) /* EC is busy processing a command */ +#define EC_LPC_CMDR_CMD (1 << 3) /* Last host write was a command */ +#define EC_LPC_CMDR_ACPI_BRST (1 << 4) /* Burst mode (not used) */ +#define EC_LPC_CMDR_SCI (1 << 5) /* SCI event is pending */ +#define EC_LPC_CMDR_SMI (1 << 6) /* SMI event is pending */ + +#define EC_LPC_ADDR_MEMMAP 0x900 +#define EC_MEMMAP_SIZE 255 /* ACPI IO buffer max is 255 bytes */ +#define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */ + +/* The offset address of each type of data in mapped memory. */ +#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors */ +#define EC_MEMMAP_FAN 0x10 /* Fan speeds */ +#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* Temp sensors (second set) */ +#define EC_MEMMAP_ID 0x20 /* 'E' 'C' */ +#define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */ +#define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */ +#define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */ +#define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */ +#define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */ +#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host command interface flags */ +#define EC_MEMMAP_SWITCHES 0x30 +#define EC_MEMMAP_HOST_EVENTS 0x34 +#define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */ +#define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */ +#define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */ +#define EC_MEMMAP_BATT_FLAG 0x4c /* Battery State, defined below */ +#define EC_MEMMAP_BATT_DCAP 0x50 /* Battery Design Capacity */ +#define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */ +#define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */ +#define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */ +#define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */ +#define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */ +#define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */ +#define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */ + +/* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */ +#define EC_TEMP_SENSOR_ENTRIES 16 +/* + * Number of temp sensors at EC_MEMMAP_TEMP_SENSOR_B. + * + * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2. + */ +#define EC_TEMP_SENSOR_B_ENTRIES 8 +#define EC_TEMP_SENSOR_NOT_PRESENT 0xff +#define EC_TEMP_SENSOR_ERROR 0xfe +#define EC_TEMP_SENSOR_NOT_POWERED 0xfd +#define EC_TEMP_SENSOR_NOT_CALIBRATED 0xfc +/* + * The offset of temperature value stored in mapped memory. This allows + * reporting a temperature range of 200K to 454K = -73C to 181C. + */ +#define EC_TEMP_SENSOR_OFFSET 200 + +#define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */ +#define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */ +#define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */ + +/* Battery bit flags at EC_MEMMAP_BATT_FLAG. */ +#define EC_BATT_FLAG_AC_PRESENT 0x01 +#define EC_BATT_FLAG_BATT_PRESENT 0x02 +#define EC_BATT_FLAG_DISCHARGING 0x04 +#define EC_BATT_FLAG_CHARGING 0x08 +#define EC_BATT_FLAG_LEVEL_CRITICAL 0x10 + +/* Switch flags at EC_MEMMAP_SWITCHES */ +#define EC_SWITCH_LID_OPEN 0x01 +#define EC_SWITCH_POWER_BUTTON_PRESSED 0x02 +#define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04 +/* Recovery requested via keyboard */ +#define EC_SWITCH_KEYBOARD_RECOVERY 0x08 +/* Recovery requested via dedicated signal (from servo board) */ +#define EC_SWITCH_DEDICATED_RECOVERY 0x10 +/* Was fake developer mode switch; now unused. Remove in next refactor. */ +#define EC_SWITCH_IGNORE0 0x20 + +/* Host command interface flags */ +/* Host command interface supports LPC args (LPC interface only) */ +#define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED 0x01 + +/* Wireless switch flags */ +#define EC_WIRELESS_SWITCH_WLAN 0x01 +#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 + +/* + * This header file is used in coreboot both in C and ACPI code. The ACPI code + * is pre-processed to handle constants but the ASL compiler is unable to + * handle actual C code so keep it separate. + */ +#ifndef __ACPI__ + +/* LPC command status byte masks */ +/* EC has written a byte in the data register and host hasn't read it yet */ +#define EC_LPC_STATUS_TO_HOST 0x01 +/* Host has written a command/data byte and the EC hasn't read it yet */ +#define EC_LPC_STATUS_FROM_HOST 0x02 +/* EC is processing a command */ +#define EC_LPC_STATUS_PROCESSING 0x04 +/* Last write to EC was a command, not data */ +#define EC_LPC_STATUS_LAST_CMD 0x08 +/* EC is in burst mode. Unsupported by Chrome EC, so this bit is never set */ +#define EC_LPC_STATUS_BURST_MODE 0x10 +/* SCI event is pending (requesting SCI query) */ +#define EC_LPC_STATUS_SCI_PENDING 0x20 +/* SMI event is pending (requesting SMI query) */ +#define EC_LPC_STATUS_SMI_PENDING 0x40 +/* (reserved) */ +#define EC_LPC_STATUS_RESERVED 0x80 + +/* + * EC is busy. This covers both the EC processing a command, and the host has + * written a new command but the EC hasn't picked it up yet. + */ +#define EC_LPC_STATUS_BUSY_MASK \ + (EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING) + +/* Host command response codes */ +enum ec_status { + EC_RES_SUCCESS = 0, + EC_RES_INVALID_COMMAND = 1, + EC_RES_ERROR = 2, + EC_RES_INVALID_PARAM = 3, + EC_RES_ACCESS_DENIED = 4, + EC_RES_INVALID_RESPONSE = 5, + EC_RES_INVALID_VERSION = 6, + EC_RES_INVALID_CHECKSUM = 7, + EC_RES_IN_PROGRESS = 8, /* Accepted, command in progress */ + EC_RES_UNAVAILABLE = 9, /* No response available */ + EC_RES_TIMEOUT = 10, /* We got a timeout */ + EC_RES_OVERFLOW = 11, /* Table / data overflow */ +}; + +/* + * Host event codes. Note these are 1-based, not 0-based, because ACPI query + * EC command uses code 0 to mean "no event pending". We explicitly specify + * each value in the enum listing so they won't change if we delete/insert an + * item or rearrange the list (it needs to be stable across platforms, not + * just within a single compiled instance). + */ +enum host_event_code { + EC_HOST_EVENT_LID_CLOSED = 1, + EC_HOST_EVENT_LID_OPEN = 2, + EC_HOST_EVENT_POWER_BUTTON = 3, + EC_HOST_EVENT_AC_CONNECTED = 4, + EC_HOST_EVENT_AC_DISCONNECTED = 5, + EC_HOST_EVENT_BATTERY_LOW = 6, + EC_HOST_EVENT_BATTERY_CRITICAL = 7, + EC_HOST_EVENT_BATTERY = 8, + EC_HOST_EVENT_THERMAL_THRESHOLD = 9, + EC_HOST_EVENT_THERMAL_OVERLOAD = 10, + EC_HOST_EVENT_THERMAL = 11, + EC_HOST_EVENT_USB_CHARGER = 12, + EC_HOST_EVENT_KEY_PRESSED = 13, + /* + * EC has finished initializing the host interface. The host can check + * for this event following sending a EC_CMD_REBOOT_EC command to + * determine when the EC is ready to accept subsequent commands. + */ + EC_HOST_EVENT_INTERFACE_READY = 14, + /* Keyboard recovery combo has been pressed */ + EC_HOST_EVENT_KEYBOARD_RECOVERY = 15, + + /* Shutdown due to thermal overload */ + EC_HOST_EVENT_THERMAL_SHUTDOWN = 16, + /* Shutdown due to battery level too low */ + EC_HOST_EVENT_BATTERY_SHUTDOWN = 17, + + /* + * The high bit of the event mask is not used as a host event code. If + * it reads back as set, then the entire event mask should be + * considered invalid by the host. This can happen when reading the + * raw event status via EC_MEMMAP_HOST_EVENTS but the LPC interface is + * not initialized on the EC, or improperly configured on the host. + */ + EC_HOST_EVENT_INVALID = 32 +}; +/* Host event mask */ +#define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1)) + +/* Arguments at EC_LPC_ADDR_HOST_ARGS */ +struct ec_lpc_host_args { + uint8_t flags; + uint8_t command_version; + uint8_t data_size; + /* + * Checksum; sum of command + flags + command_version + data_size + + * all params/response data bytes. + */ + uint8_t checksum; +} __packed; + +/* Flags for ec_lpc_host_args.flags */ +/* + * Args are from host. Data area at EC_LPC_ADDR_HOST_PARAM contains command + * params. + * + * If EC gets a command and this flag is not set, this is an old-style command. + * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with + * unknown length. EC must respond with an old-style response (that is, + * withouth setting EC_HOST_ARGS_FLAG_TO_HOST). + */ +#define EC_HOST_ARGS_FLAG_FROM_HOST 0x01 +/* + * Args are from EC. Data area at EC_LPC_ADDR_HOST_PARAM contains response. + * + * If EC responds to a command and this flag is not set, this is an old-style + * response. Command version is 0 and response data from EC is at + * EC_LPC_ADDR_OLD_PARAM with unknown length. + */ +#define EC_HOST_ARGS_FLAG_TO_HOST 0x02 + +/* + * Notes on commands: + * + * Each command is an 8-byte command value. Commands which take params or + * return response data specify structs for that data. If no struct is + * specified, the command does not input or output data, respectively. + * Parameter/response length is implicit in the structs. Some underlying + * communication protocols (I2C, SPI) may add length or checksum headers, but + * those are implementation-dependent and not defined here. + */ + +/*****************************************************************************/ +/* General / test commands */ + +/* + * Get protocol version, used to deal with non-backward compatible protocol + * changes. + */ +#define EC_CMD_PROTO_VERSION 0x00 + +struct ec_response_proto_version { + uint32_t version; +} __packed; + +/* + * Hello. This is a simple command to test the EC is responsive to + * commands. + */ +#define EC_CMD_HELLO 0x01 + +struct ec_params_hello { + uint32_t in_data; /* Pass anything here */ +} __packed; + +struct ec_response_hello { + uint32_t out_data; /* Output will be in_data + 0x01020304 */ +} __packed; + +/* Get version number */ +#define EC_CMD_GET_VERSION 0x02 + +enum ec_current_image { + EC_IMAGE_UNKNOWN = 0, + EC_IMAGE_RO, + EC_IMAGE_RW +}; + +struct ec_response_get_version { + /* Null-terminated version strings for RO, RW */ + char version_string_ro[32]; + char version_string_rw[32]; + char reserved[32]; /* Was previously RW-B string */ + uint32_t current_image; /* One of ec_current_image */ +} __packed; + +/* Read test */ +#define EC_CMD_READ_TEST 0x03 + +struct ec_params_read_test { + uint32_t offset; /* Starting value for read buffer */ + uint32_t size; /* Size to read in bytes */ +} __packed; + +struct ec_response_read_test { + uint32_t data[32]; +} __packed; + +/* + * Get build information + * + * Response is null-terminated string. + */ +#define EC_CMD_GET_BUILD_INFO 0x04 + +/* Get chip info */ +#define EC_CMD_GET_CHIP_INFO 0x05 + +struct ec_response_get_chip_info { + /* Null-terminated strings */ + char vendor[32]; + char name[32]; + char revision[32]; /* Mask version */ +} __packed; + +/* Get board HW version */ +#define EC_CMD_GET_BOARD_VERSION 0x06 + +struct ec_response_board_version { + uint16_t board_version; /* A monotonously incrementing number. */ +} __packed; + +/* + * Read memory-mapped data. + * + * This is an alternate interface to memory-mapped data for bus protocols + * which don't support direct-mapped memory - I2C, SPI, etc. + * + * Response is params.size bytes of data. + */ +#define EC_CMD_READ_MEMMAP 0x07 + +struct ec_params_read_memmap { + uint8_t offset; /* Offset in memmap (EC_MEMMAP_*) */ + uint8_t size; /* Size to read in bytes */ +} __packed; + +/* Read versions supported for a command */ +#define EC_CMD_GET_CMD_VERSIONS 0x08 + +struct ec_params_get_cmd_versions { + uint8_t cmd; /* Command to check */ +} __packed; + +struct ec_response_get_cmd_versions { + /* + * Mask of supported versions; use EC_VER_MASK() to compare with a + * desired version. + */ + uint32_t version_mask; +} __packed; + +/* + * Check EC communcations status (busy). This is needed on i2c/spi but not + * on lpc since it has its own out-of-band busy indicator. + * + * lpc must read the status from the command register. Attempting this on + * lpc will overwrite the args/parameter space and corrupt its data. + */ +#define EC_CMD_GET_COMMS_STATUS 0x09 + +/* Avoid using ec_status which is for return values */ +enum ec_comms_status { + EC_COMMS_STATUS_PROCESSING = 1 << 0, /* Processing cmd */ +}; + +struct ec_response_get_comms_status { + uint32_t flags; /* Mask of enum ec_comms_status */ +} __packed; + + +/*****************************************************************************/ +/* Flash commands */ + +/* Get flash info */ +#define EC_CMD_FLASH_INFO 0x10 + +struct ec_response_flash_info { + /* Usable flash size, in bytes */ + uint32_t flash_size; + /* + * Write block size. Write offset and size must be a multiple + * of this. + */ + uint32_t write_block_size; + /* + * Erase block size. Erase offset and size must be a multiple + * of this. + */ + uint32_t erase_block_size; + /* + * Protection block size. Protection offset and size must be a + * multiple of this. + */ + uint32_t protect_block_size; +} __packed; + +/* + * Read flash + * + * Response is params.size bytes of data. + */ +#define EC_CMD_FLASH_READ 0x11 + +struct ec_params_flash_read { + uint32_t offset; /* Byte offset to read */ + uint32_t size; /* Size to read in bytes */ +} __packed; + +/* Write flash */ +#define EC_CMD_FLASH_WRITE 0x12 + +struct ec_params_flash_write { + uint32_t offset; /* Byte offset to write */ + uint32_t size; /* Size to write in bytes */ + /* + * Data to write. Could really use EC_PARAM_SIZE - 8, but tidiest to + * use a power of 2 so writes stay aligned. + */ + uint8_t data[64]; +} __packed; + +/* Erase flash */ +#define EC_CMD_FLASH_ERASE 0x13 + +struct ec_params_flash_erase { + uint32_t offset; /* Byte offset to erase */ + uint32_t size; /* Size to erase in bytes */ +} __packed; + +/* + * Get/set flash protection. + * + * If mask!=0, sets/clear the requested bits of flags. Depending on the + * firmware write protect GPIO, not all flags will take effect immediately; + * some flags require a subsequent hard reset to take effect. Check the + * returned flags bits to see what actually happened. + * + * If mask=0, simply returns the current flags state. + */ +#define EC_CMD_FLASH_PROTECT 0x15 +#define EC_VER_FLASH_PROTECT 1 /* Command version 1 */ + +/* Flags for flash protection */ +/* RO flash code protected when the EC boots */ +#define EC_FLASH_PROTECT_RO_AT_BOOT (1 << 0) +/* + * RO flash code protected now. If this bit is set, at-boot status cannot + * be changed. + */ +#define EC_FLASH_PROTECT_RO_NOW (1 << 1) +/* Entire flash code protected now, until reboot. */ +#define EC_FLASH_PROTECT_ALL_NOW (1 << 2) +/* Flash write protect GPIO is asserted now */ +#define EC_FLASH_PROTECT_GPIO_ASSERTED (1 << 3) +/* Error - at least one bank of flash is stuck locked, and cannot be unlocked */ +#define EC_FLASH_PROTECT_ERROR_STUCK (1 << 4) +/* + * Error - flash protection is in inconsistent state. At least one bank of + * flash which should be protected is not protected. Usually fixed by + * re-requesting the desired flags, or by a hard reset if that fails. + */ +#define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5) +/* Entile flash code protected when the EC boots */ +#define EC_FLASH_PROTECT_ALL_AT_BOOT (1 << 6) + +struct ec_params_flash_protect { + uint32_t mask; /* Bits in flags to apply */ + uint32_t flags; /* New flags to apply */ +} __packed; + +struct ec_response_flash_protect { + /* Current value of flash protect flags */ + uint32_t flags; + /* + * Flags which are valid on this platform. This allows the caller + * to distinguish between flags which aren't set vs. flags which can't + * be set on this platform. + */ + uint32_t valid_flags; + /* Flags which can be changed given the current protection state */ + uint32_t writable_flags; +} __packed; + +/* + * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash + * write protect. These commands may be reused with version > 0. + */ + +/* Get the region offset/size */ +#define EC_CMD_FLASH_REGION_INFO 0x16 +#define EC_VER_FLASH_REGION_INFO 1 + +enum ec_flash_region { + /* Region which holds read-only EC image */ + EC_FLASH_REGION_RO, + /* Region which holds rewritable EC image */ + EC_FLASH_REGION_RW, + /* + * Region which should be write-protected in the factory (a superset of + * EC_FLASH_REGION_RO) + */ + EC_FLASH_REGION_WP_RO, +}; + +struct ec_params_flash_region_info { + uint32_t region; /* enum ec_flash_region */ +} __packed; + +struct ec_response_flash_region_info { + uint32_t offset; + uint32_t size; +} __packed; + +/* Read/write VbNvContext */ +#define EC_CMD_VBNV_CONTEXT 0x17 +#define EC_VER_VBNV_CONTEXT 1 +#define EC_VBNV_BLOCK_SIZE 16 + +enum ec_vbnvcontext_op { + EC_VBNV_CONTEXT_OP_READ, + EC_VBNV_CONTEXT_OP_WRITE, +}; + +struct ec_params_vbnvcontext { + uint32_t op; + uint8_t block[EC_VBNV_BLOCK_SIZE]; +} __packed; + +struct ec_response_vbnvcontext { + uint8_t block[EC_VBNV_BLOCK_SIZE]; +} __packed; + +/*****************************************************************************/ +/* PWM commands */ + +/* Get fan target RPM */ +#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20 + +struct ec_response_pwm_get_fan_rpm { + uint32_t rpm; +} __packed; + +/* Set target fan RPM */ +#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21 + +struct ec_params_pwm_set_fan_target_rpm { + uint32_t rpm; +} __packed; + +/* Get keyboard backlight */ +#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22 + +struct ec_response_pwm_get_keyboard_backlight { + uint8_t percent; + uint8_t enabled; +} __packed; + +/* Set keyboard backlight */ +#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23 + +struct ec_params_pwm_set_keyboard_backlight { + uint8_t percent; +} __packed; + +/* Set target fan PWM duty cycle */ +#define EC_CMD_PWM_SET_FAN_DUTY 0x24 + +struct ec_params_pwm_set_fan_duty { + uint32_t percent; +} __packed; + +/*****************************************************************************/ +/* + * Lightbar commands. This looks worse than it is. Since we only use one HOST + * command to say "talk to the lightbar", we put the "and tell it to do X" part + * into a subcommand. We'll make separate structs for subcommands with + * different input args, so that we know how much to expect. + */ +#define EC_CMD_LIGHTBAR_CMD 0x28 + +struct rgb_s { + uint8_t r, g, b; +}; + +#define LB_BATTERY_LEVELS 4 +/* List of tweakable parameters. NOTE: It's __packed so it can be sent in a + * host command, but the alignment is the same regardless. Keep it that way. + */ +struct lightbar_params { + /* Timing */ + int google_ramp_up; + int google_ramp_down; + int s3s0_ramp_up; + int s0_tick_delay[2]; /* AC=0/1 */ + int s0a_tick_delay[2]; /* AC=0/1 */ + int s0s3_ramp_down; + int s3_sleep_for; + int s3_ramp_up; + int s3_ramp_down; + + /* Oscillation */ + uint8_t new_s0; + uint8_t osc_min[2]; /* AC=0/1 */ + uint8_t osc_max[2]; /* AC=0/1 */ + uint8_t w_ofs[2]; /* AC=0/1 */ + + /* Brightness limits based on the backlight and AC. */ + uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ + uint8_t bright_bl_on_min[2]; /* AC=0/1 */ + uint8_t bright_bl_on_max[2]; /* AC=0/1 */ + + /* Battery level thresholds */ + uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; + + /* Map [AC][battery_level] to color index */ + uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ + uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ + + /* Color palette */ + struct rgb_s color[8]; /* 0-3 are Google colors */ +} __packed; + +struct ec_params_lightbar { + uint8_t cmd; /* Command (see enum lightbar_command) */ + union { + struct { + /* no args */ + } dump, off, on, init, get_seq, get_params; + + struct num { + uint8_t num; + } brightness, seq, demo; + + struct reg { + uint8_t ctrl, reg, value; + } reg; + + struct rgb { + uint8_t led, red, green, blue; + } rgb; + + struct lightbar_params set_params; + }; +} __packed; + +struct ec_response_lightbar { + union { + struct dump { + struct { + uint8_t reg; + uint8_t ic0; + uint8_t ic1; + } vals[23]; + } dump; + + struct get_seq { + uint8_t num; + } get_seq; + + struct lightbar_params get_params; + + struct { + /* no return params */ + } off, on, init, brightness, seq, reg, rgb, demo, set_params; + }; +} __packed; + +/* Lightbar commands */ +enum lightbar_command { + LIGHTBAR_CMD_DUMP = 0, + LIGHTBAR_CMD_OFF = 1, + LIGHTBAR_CMD_ON = 2, + LIGHTBAR_CMD_INIT = 3, + LIGHTBAR_CMD_BRIGHTNESS = 4, + LIGHTBAR_CMD_SEQ = 5, + LIGHTBAR_CMD_REG = 6, + LIGHTBAR_CMD_RGB = 7, + LIGHTBAR_CMD_GET_SEQ = 8, + LIGHTBAR_CMD_DEMO = 9, + LIGHTBAR_CMD_GET_PARAMS = 10, + LIGHTBAR_CMD_SET_PARAMS = 11, + LIGHTBAR_NUM_CMDS +}; + +/*****************************************************************************/ +/* Verified boot commands */ + +/* + * Note: command code 0x29 version 0 was VBOOT_CMD in Link EVT; it may be + * reused for other purposes with version > 0. + */ + +/* Verified boot hash command */ +#define EC_CMD_VBOOT_HASH 0x2A + +struct ec_params_vboot_hash { + uint8_t cmd; /* enum ec_vboot_hash_cmd */ + uint8_t hash_type; /* enum ec_vboot_hash_type */ + uint8_t nonce_size; /* Nonce size; may be 0 */ + uint8_t reserved0; /* Reserved; set 0 */ + uint32_t offset; /* Offset in flash to hash */ + uint32_t size; /* Number of bytes to hash */ + uint8_t nonce_data[64]; /* Nonce data; ignored if nonce_size=0 */ +} __packed; + +struct ec_response_vboot_hash { + uint8_t status; /* enum ec_vboot_hash_status */ + uint8_t hash_type; /* enum ec_vboot_hash_type */ + uint8_t digest_size; /* Size of hash digest in bytes */ + uint8_t reserved0; /* Ignore; will be 0 */ + uint32_t offset; /* Offset in flash which was hashed */ + uint32_t size; /* Number of bytes hashed */ + uint8_t hash_digest[64]; /* Hash digest data */ +} __packed; + +enum ec_vboot_hash_cmd { + EC_VBOOT_HASH_GET = 0, /* Get current hash status */ + EC_VBOOT_HASH_ABORT = 1, /* Abort calculating current hash */ + EC_VBOOT_HASH_START = 2, /* Start computing a new hash */ + EC_VBOOT_HASH_RECALC = 3, /* Synchronously compute a new hash */ +}; + +enum ec_vboot_hash_type { + EC_VBOOT_HASH_TYPE_SHA256 = 0, /* SHA-256 */ +}; + +enum ec_vboot_hash_status { + EC_VBOOT_HASH_STATUS_NONE = 0, /* No hash (not started, or aborted) */ + EC_VBOOT_HASH_STATUS_DONE = 1, /* Finished computing a hash */ + EC_VBOOT_HASH_STATUS_BUSY = 2, /* Busy computing a hash */ +}; + +/* + * Special values for offset for EC_VBOOT_HASH_START and EC_VBOOT_HASH_RECALC. + * If one of these is specified, the EC will automatically update offset and + * size to the correct values for the specified image (RO or RW). + */ +#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe +#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd + +/*****************************************************************************/ +/* USB charging control commands */ + +/* Set USB port charging mode */ +#define EC_CMD_USB_CHARGE_SET_MODE 0x30 + +struct ec_params_usb_charge_set_mode { + uint8_t usb_port_id; + uint8_t mode; +} __packed; + +/*****************************************************************************/ +/* Persistent storage for host */ + +/* Maximum bytes that can be read/written in a single command */ +#define EC_PSTORE_SIZE_MAX 64 + +/* Get persistent storage info */ +#define EC_CMD_PSTORE_INFO 0x40 + +struct ec_response_pstore_info { + /* Persistent storage size, in bytes */ + uint32_t pstore_size; + /* Access size; read/write offset and size must be a multiple of this */ + uint32_t access_size; +} __packed; + +/* + * Read persistent storage + * + * Response is params.size bytes of data. + */ +#define EC_CMD_PSTORE_READ 0x41 + +struct ec_params_pstore_read { + uint32_t offset; /* Byte offset to read */ + uint32_t size; /* Size to read in bytes */ +} __packed; + +/* Write persistent storage */ +#define EC_CMD_PSTORE_WRITE 0x42 + +struct ec_params_pstore_write { + uint32_t offset; /* Byte offset to write */ + uint32_t size; /* Size to write in bytes */ + uint8_t data[EC_PSTORE_SIZE_MAX]; +} __packed; + +/*****************************************************************************/ +/* Real-time clock */ + +/* RTC params and response structures */ +struct ec_params_rtc { + uint32_t time; +} __packed; + +struct ec_response_rtc { + uint32_t time; +} __packed; + +/* These use ec_response_rtc */ +#define EC_CMD_RTC_GET_VALUE 0x44 +#define EC_CMD_RTC_GET_ALARM 0x45 + +/* These all use ec_params_rtc */ +#define EC_CMD_RTC_SET_VALUE 0x46 +#define EC_CMD_RTC_SET_ALARM 0x47 + +/*****************************************************************************/ +/* Port80 log access */ + +/* Get last port80 code from previous boot */ +#define EC_CMD_PORT80_LAST_BOOT 0x48 + +struct ec_response_port80_last_boot { + uint16_t code; +} __packed; + +/*****************************************************************************/ +/* Thermal engine commands */ + +/* Set thershold value */ +#define EC_CMD_THERMAL_SET_THRESHOLD 0x50 + +struct ec_params_thermal_set_threshold { + uint8_t sensor_type; + uint8_t threshold_id; + uint16_t value; +} __packed; + +/* Get threshold value */ +#define EC_CMD_THERMAL_GET_THRESHOLD 0x51 + +struct ec_params_thermal_get_threshold { + uint8_t sensor_type; + uint8_t threshold_id; +} __packed; + +struct ec_response_thermal_get_threshold { + uint16_t value; +} __packed; + +/* Toggle automatic fan control */ +#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52 + +/* Get TMP006 calibration data */ +#define EC_CMD_TMP006_GET_CALIBRATION 0x53 + +struct ec_params_tmp006_get_calibration { + uint8_t index; +} __packed; + +struct ec_response_tmp006_get_calibration { + float s0; + float b0; + float b1; + float b2; +} __packed; + +/* Set TMP006 calibration data */ +#define EC_CMD_TMP006_SET_CALIBRATION 0x54 + +struct ec_params_tmp006_set_calibration { + uint8_t index; + uint8_t reserved[3]; /* Reserved; set 0 */ + float s0; + float b0; + float b1; + float b2; +} __packed; + +/*****************************************************************************/ +/* MKBP - Matrix KeyBoard Protocol */ + +/* + * Read key state + * + * Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for + * expected response size. + */ +#define EC_CMD_MKBP_STATE 0x60 + +/* Provide information about the matrix : number of rows and columns */ +#define EC_CMD_MKBP_INFO 0x61 + +struct ec_response_mkbp_info { + uint32_t rows; + uint32_t cols; + uint8_t switches; +} __packed; + +/* Simulate key press */ +#define EC_CMD_MKBP_SIMULATE_KEY 0x62 + +struct ec_params_mkbp_simulate_key { + uint8_t col; + uint8_t row; + uint8_t pressed; +} __packed; + +/* Configure keyboard scanning */ +#define EC_CMD_MKBP_SET_CONFIG 0x64 +#define EC_CMD_MKBP_GET_CONFIG 0x65 + +/* flags */ +enum mkbp_config_flags { + EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */ +}; + +enum mkbp_config_valid { + EC_MKBP_VALID_SCAN_PERIOD = 1 << 0, + EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1, + EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3, + EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4, + EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5, + EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6, + EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7, +}; + +/* Configuration for our key scanning algorithm */ +struct ec_mkbp_config { + uint32_t valid_mask; /* valid fields */ + uint8_t flags; /* some flags (enum mkbp_config_flags) */ + uint8_t valid_flags; /* which flags are valid */ + uint16_t scan_period_us; /* period between start of scans */ + /* revert to interrupt mode after no activity for this long */ + uint32_t poll_timeout_us; + /* + * minimum post-scan relax time. Once we finish a scan we check + * the time until we are due to start the next one. If this time is + * shorter this field, we use this instead. + */ + uint16_t min_post_scan_delay_us; + /* delay between setting up output and waiting for it to settle */ + uint16_t output_settle_us; + uint16_t debounce_down_us; /* time for debounce on key down */ + uint16_t debounce_up_us; /* time for debounce on key up */ + /* maximum depth to allow for fifo (0 = no keyscan output) */ + uint8_t fifo_max_depth; +} __packed; + +struct ec_params_mkbp_set_config { + struct ec_mkbp_config config; +} __packed; + +struct ec_response_mkbp_get_config { + struct ec_mkbp_config config; +} __packed; + +/* Run the key scan emulation */ +#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66 + +enum ec_keyscan_seq_cmd { + EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */ + EC_KEYSCAN_SEQ_CLEAR = 1, /* Clear sequence */ + EC_KEYSCAN_SEQ_ADD = 2, /* Add item to sequence */ + EC_KEYSCAN_SEQ_START = 3, /* Start running sequence */ + EC_KEYSCAN_SEQ_COLLECT = 4, /* Collect sequence summary data */ +}; + +enum ec_collect_flags { + /* + * Indicates this scan was processed by the EC. Due to timing, some + * scans may be skipped. + */ + EC_KEYSCAN_SEQ_FLAG_DONE = 1 << 0, +}; + +struct ec_collect_item { + uint8_t flags; /* some flags (enum ec_collect_flags) */ +}; + +struct ec_params_keyscan_seq_ctrl { + uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */ + union { + struct { + uint8_t active; /* still active */ + uint8_t num_items; /* number of items */ + /* Current item being presented */ + uint8_t cur_item; + } status; + struct { + /* + * Absolute time for this scan, measured from the + * start of the sequence. + */ + uint32_t time_us; + uint8_t scan[0]; /* keyscan data */ + } add; + struct { + uint8_t start_item; /* First item to return */ + uint8_t num_items; /* Number of items to return */ + } collect; + }; +} __packed; + +struct ec_result_keyscan_seq_ctrl { + union { + struct { + uint8_t num_items; /* Number of items */ + /* Data for each item */ + struct ec_collect_item item[0]; + } collect; + }; +} __packed; + +/*****************************************************************************/ +/* Temperature sensor commands */ + +/* Read temperature sensor info */ +#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70 + +struct ec_params_temp_sensor_get_info { + uint8_t id; +} __packed; + +struct ec_response_temp_sensor_get_info { + char sensor_name[32]; + uint8_t sensor_type; +} __packed; + +/*****************************************************************************/ + +/* + * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI + * commands accidentally sent to the wrong interface. See the ACPI section + * below. + */ + +/*****************************************************************************/ +/* Host event commands */ + +/* + * Host event mask params and response structures, shared by all of the host + * event commands below. + */ +struct ec_params_host_event_mask { + uint32_t mask; +} __packed; + +struct ec_response_host_event_mask { + uint32_t mask; +} __packed; + +/* These all use ec_response_host_event_mask */ +#define EC_CMD_HOST_EVENT_GET_B 0x87 +#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x88 +#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x89 +#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d + +/* These all use ec_params_host_event_mask */ +#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x8a +#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x8b +#define EC_CMD_HOST_EVENT_CLEAR 0x8c +#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e +#define EC_CMD_HOST_EVENT_CLEAR_B 0x8f + +/*****************************************************************************/ +/* Switch commands */ + +/* Enable/disable LCD backlight */ +#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90 + +struct ec_params_switch_enable_backlight { + uint8_t enabled; +} __packed; + +/* Enable/disable WLAN/Bluetooth */ +#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91 + +struct ec_params_switch_enable_wireless { + uint8_t enabled; +} __packed; + +/*****************************************************************************/ +/* GPIO commands. Only available on EC if write protect has been disabled. */ + +/* Set GPIO output value */ +#define EC_CMD_GPIO_SET 0x92 + +struct ec_params_gpio_set { + char name[32]; + uint8_t val; +} __packed; + +/* Get GPIO value */ +#define EC_CMD_GPIO_GET 0x93 + +struct ec_params_gpio_get { + char name[32]; +} __packed; +struct ec_response_gpio_get { + uint8_t val; +} __packed; + +/*****************************************************************************/ +/* I2C commands. Only available when flash write protect is unlocked. */ + +/* Read I2C bus */ +#define EC_CMD_I2C_READ 0x94 + +struct ec_params_i2c_read { + uint16_t addr; + uint8_t read_size; /* Either 8 or 16. */ + uint8_t port; + uint8_t offset; +} __packed; +struct ec_response_i2c_read { + uint16_t data; +} __packed; + +/* Write I2C bus */ +#define EC_CMD_I2C_WRITE 0x95 + +struct ec_params_i2c_write { + uint16_t data; + uint16_t addr; + uint8_t write_size; /* Either 8 or 16. */ + uint8_t port; + uint8_t offset; +} __packed; + +/*****************************************************************************/ +/* Charge state commands. Only available when flash write protect unlocked. */ + +/* Force charge state machine to stop in idle mode */ +#define EC_CMD_CHARGE_FORCE_IDLE 0x96 + +struct ec_params_force_idle { + uint8_t enabled; +} __packed; + +/*****************************************************************************/ +/* Console commands. Only available when flash write protect is unlocked. */ + +/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */ +#define EC_CMD_CONSOLE_SNAPSHOT 0x97 + +/* + * Read next chunk of data from saved snapshot. + * + * Response is null-terminated string. Empty string, if there is no more + * remaining output. + */ +#define EC_CMD_CONSOLE_READ 0x98 + +/*****************************************************************************/ + +/* + * Cut off battery power output if the battery supports. + * + * For unsupported battery, just don't implement this command and lets EC + * return EC_RES_INVALID_COMMAND. + */ +#define EC_CMD_BATTERY_CUT_OFF 0x99 + +/*****************************************************************************/ +/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */ + +/* + * Dump charge state machine context. + * + * Response is a binary dump of charge state machine context. + */ +#define EC_CMD_CHARGE_DUMP 0xa0 + +/* + * Set maximum battery charging current. + */ +#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1 + +struct ec_params_current_limit { + uint32_t limit; +} __packed; + +/*****************************************************************************/ +/* System commands */ + +/* + * TODO: this is a confusing name, since it doesn't necessarily reboot the EC. + * Rename to "set image" or something similar. + */ +#define EC_CMD_REBOOT_EC 0xd2 + +/* Command */ +enum ec_reboot_cmd { + EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */ + EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */ + EC_REBOOT_JUMP_RW = 2, /* Jump to RW without rebooting */ + /* (command 3 was jump to RW-B) */ + EC_REBOOT_COLD = 4, /* Cold-reboot */ + EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */ + EC_REBOOT_HIBERNATE = 6 /* Hibernate EC */ +}; + +/* Flags for ec_params_reboot_ec.reboot_flags */ +#define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */ +#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) /* Reboot after AP shutdown */ + +struct ec_params_reboot_ec { + uint8_t cmd; /* enum ec_reboot_cmd */ + uint8_t flags; /* See EC_REBOOT_FLAG_* */ +} __packed; + +/* + * Get information on last EC panic. + * + * Returns variable-length platform-dependent panic information. See panic.h + * for details. + */ +#define EC_CMD_GET_PANIC_INFO 0xd3 + +/*****************************************************************************/ +/* + * ACPI commands + * + * These are valid ONLY on the ACPI command/data port. + */ + +/* + * ACPI Read Embedded Controller + * + * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). + * + * Use the following sequence: + * + * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write address to EC_LPC_ADDR_ACPI_DATA + * - Wait for EC_LPC_CMDR_DATA bit to set + * - Read value from EC_LPC_ADDR_ACPI_DATA + */ +#define EC_CMD_ACPI_READ 0x80 + +/* + * ACPI Write Embedded Controller + * + * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). + * + * Use the following sequence: + * + * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write address to EC_LPC_ADDR_ACPI_DATA + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write value to EC_LPC_ADDR_ACPI_DATA + */ +#define EC_CMD_ACPI_WRITE 0x81 + +/* + * ACPI Query Embedded Controller + * + * This clears the lowest-order bit in the currently pending host events, and + * sets the result code to the 1-based index of the bit (event 0x00000001 = 1, + * event 0x80000000 = 32), or 0 if no event was pending. + */ +#define EC_CMD_ACPI_QUERY_EVENT 0x84 + +/* Valid addresses in ACPI memory space, for read/write commands */ +/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */ +#define EC_ACPI_MEM_VERSION 0x00 +/* + * Test location; writing value here updates test compliment byte to (0xff - + * value). + */ +#define EC_ACPI_MEM_TEST 0x01 +/* Test compliment; writes here are ignored. */ +#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02 +/* Keyboard backlight brightness percent (0 - 100) */ +#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03 + +/* Current version of ACPI memory address space */ +#define EC_ACPI_MEM_VERSION_CURRENT 1 + + +/*****************************************************************************/ +/* + * Special commands + * + * These do not follow the normal rules for commands. See each command for + * details. + */ + +/* + * Reboot NOW + * + * This command will work even when the EC LPC interface is busy, because the + * reboot command is processed at interrupt level. Note that when the EC + * reboots, the host will reboot too, so there is no response to this command. + * + * Use EC_CMD_REBOOT_EC to reboot the EC more politely. + */ +#define EC_CMD_REBOOT 0xd1 /* Think "die" */ + +/* + * Resend last response (not supported on LPC). + * + * Returns EC_RES_UNAVAILABLE if there is no response available - for example, + * there was no previous command, or the previous command's response was too + * big to save. + */ +#define EC_CMD_RESEND_RESPONSE 0xdb + +/* + * This header byte on a command indicate version 0. Any header byte less + * than this means that we are talking to an old EC which doesn't support + * versioning. In that case, we assume version 0. + * + * Header bytes greater than this indicate a later version. For example, + * EC_CMD_VERSION0 + 1 means we are using version 1. + * + * The old EC interface must not use commands 0dc or higher. + */ +#define EC_CMD_VERSION0 0xdc + +#endif /* !__ACPI__ */ + +#endif /* __CROS_EC_COMMANDS_H */ diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index ecddc5173c7c..8f21daf62fb5 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -1,9 +1,10 @@ /* * TI Palmas * - * Copyright 2011 Texas Instruments Inc. + * Copyright 2011-2013 Texas Instruments Inc. * * Author: Graeme Gregory <gg@slimlogic.co.uk> + * Author: Ian Lartey <ian@slimlogic.co.uk> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -22,6 +23,15 @@ #define PALMAS_NUM_CLIENTS 3 +/* The ID_REVISION NUMBERS */ +#define PALMAS_CHIP_OLD_ID 0x0000 +#define PALMAS_CHIP_ID 0xC035 +#define PALMAS_CHIP_CHARGER_ID 0xC036 + +#define is_palmas(a) (((a) == PALMAS_CHIP_OLD_ID) || \ + ((a) == PALMAS_CHIP_ID)) +#define is_palmas_charger(a) ((a) == PALMAS_CHIP_CHARGER_ID) + struct palmas_pmic; struct palmas_gpadc; struct palmas_resource; diff --git a/include/linux/mfd/retu.h b/include/linux/mfd/retu.h index 1e2715d5b836..65471c4a3926 100644 --- a/include/linux/mfd/retu.h +++ b/include/linux/mfd/retu.h @@ -1,5 +1,5 @@ /* - * Retu MFD driver interface + * Retu/Tahvo MFD driver interface * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this @@ -19,4 +19,10 @@ int retu_write(struct retu_dev *, u8, u16); #define RETU_REG_CC1 0x0d /* Common control register 1 */ #define RETU_REG_STATUS 0x16 /* Status register */ +/* Interrupt sources */ +#define TAHVO_INT_VBUS 0 /* VBUS state */ + +/* Interrupt status */ +#define TAHVO_STAT_VBUS (1 << TAHVO_INT_VBUS) + #endif /* __LINUX_MFD_RETU_H */ diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h index 26ea7f1b7caf..86bc635f8385 100644 --- a/include/linux/mfd/rtsx_pci.h +++ b/include/linux/mfd/rtsx_pci.h @@ -500,6 +500,8 @@ #define BPP_POWER_15_PERCENT_ON 0x08 #define BPP_POWER_ON 0x00 #define BPP_POWER_MASK 0x0F +#define SD_VCC_PARTIAL_POWER_ON 0x02 +#define SD_VCC_POWER_ON 0x00 /* PWR_GATE_CTRL */ #define PWR_GATE_EN 0x01 @@ -689,6 +691,40 @@ #define IMAGE_FLAG_ADDR0 0xCE80 #define IMAGE_FLAG_ADDR1 0xCE81 +/* Phy register */ +#define PHY_PCR 0x00 +#define PHY_RCR0 0x01 +#define PHY_RCR1 0x02 +#define PHY_RCR2 0x03 +#define PHY_RTCR 0x04 +#define PHY_RDR 0x05 +#define PHY_TCR0 0x06 +#define PHY_TCR1 0x07 +#define PHY_TUNE 0x08 +#define PHY_IMR 0x09 +#define PHY_BPCR 0x0A +#define PHY_BIST 0x0B +#define PHY_RAW_L 0x0C +#define PHY_RAW_H 0x0D +#define PHY_RAW_DATA 0x0E +#define PHY_HOST_CLK_CTRL 0x0F +#define PHY_DMR 0x10 +#define PHY_BACR 0x11 +#define PHY_IER 0x12 +#define PHY_BCSR 0x13 +#define PHY_BPR 0x14 +#define PHY_BPNR2 0x15 +#define PHY_BPNR 0x16 +#define PHY_BRNR2 0x17 +#define PHY_BENR 0x18 +#define PHY_REG_REV 0x19 +#define PHY_FLD0 0x1A +#define PHY_FLD1 0x1B +#define PHY_FLD2 0x1C +#define PHY_FLD3 0x1D +#define PHY_FLD4 0x1E +#define PHY_DUM_REG 0x1F + #define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0) struct rtsx_pcr; diff --git a/include/linux/mfd/si476x-core.h b/include/linux/mfd/si476x-core.h new file mode 100644 index 000000000000..ba89b94e4a56 --- /dev/null +++ b/include/linux/mfd/si476x-core.h @@ -0,0 +1,533 @@ +/* + * include/media/si476x-core.h -- Common definitions for si476x core + * device + * + * Copyright (C) 2012 Innovative Converged Devices(ICD) + * Copyright (C) 2013 Andrey Smirnov + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#ifndef SI476X_CORE_H +#define SI476X_CORE_H + +#include <linux/kfifo.h> +#include <linux/atomic.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/mutex.h> +#include <linux/mfd/core.h> +#include <linux/videodev2.h> +#include <linux/regulator/consumer.h> + +#include <linux/mfd/si476x-platform.h> +#include <linux/mfd/si476x-reports.h> + +/* Command Timeouts */ +#define SI476X_DEFAULT_TIMEOUT 100000 +#define SI476X_TIMEOUT_TUNE 700000 +#define SI476X_TIMEOUT_POWER_UP 330000 +#define SI476X_STATUS_POLL_US 0 + +/* -------------------- si476x-i2c.c ----------------------- */ + +enum si476x_freq_supported_chips { + SI476X_CHIP_SI4761 = 1, + SI476X_CHIP_SI4764, + SI476X_CHIP_SI4768, +}; + +enum si476x_part_revisions { + SI476X_REVISION_A10 = 0, + SI476X_REVISION_A20 = 1, + SI476X_REVISION_A30 = 2, +}; + +enum si476x_mfd_cells { + SI476X_RADIO_CELL = 0, + SI476X_CODEC_CELL, + SI476X_MFD_CELLS, +}; + +/** + * enum si476x_power_state - possible power state of the si476x + * device. + * + * @SI476X_POWER_DOWN: In this state all regulators are turned off + * and the reset line is pulled low. The device is completely + * inactive. + * @SI476X_POWER_UP_FULL: In this state all the power regualtors are + * turned on, reset line pulled high, IRQ line is enabled(polling is + * active for polling use scenario) and device is turned on with + * POWER_UP command. The device is ready to be used. + * @SI476X_POWER_INCONSISTENT: This state indicates that previous + * power down was inconsistent, meaning some of the regulators were + * not turned down and thus use of the device, without power-cycling + * is impossible. + */ +enum si476x_power_state { + SI476X_POWER_DOWN = 0, + SI476X_POWER_UP_FULL = 1, + SI476X_POWER_INCONSISTENT = 2, +}; + +/** + * struct si476x_core - internal data structure representing the + * underlying "core" device which all the MFD cell-devices use. + * + * @client: Actual I2C client used to transfer commands to the chip. + * @chip_id: Last digit of the chip model(E.g. "1" for SI4761) + * @cells: MFD cell devices created by this driver. + * @cmd_lock: Mutex used to serialize all the requests to the core + * device. This filed should not be used directly. Instead + * si476x_core_lock()/si476x_core_unlock() should be used to get + * exclusive access to the "core" device. + * @users: Active users counter(Used by the radio cell) + * @rds_read_queue: Wait queue used to wait for RDS data. + * @rds_fifo: FIFO in which all the RDS data received from the chip is + * placed. + * @rds_fifo_drainer: Worker that drains on-chip RDS FIFO. + * @rds_drainer_is_working: Flag used for launching only one instance + * of the @rds_fifo_drainer. + * @rds_drainer_status_lock: Lock used to guard access to the + * @rds_drainer_is_working variable. + * @command: Wait queue for wainting on the command comapletion. + * @cts: Clear To Send flag set upon receiving first status with CTS + * set. + * @tuning: Wait queue used for wainting for tune/seek comand + * completion. + * @stc: Similar to @cts, but for the STC bit of the status value. + * @power_up_parameters: Parameters used as argument for POWER_UP + * command when the device is started. + * @state: Current power state of the device. + * @supplues: Structure containing handles to all power supplies used + * by the device (NULL ones are ignored). + * @gpio_reset: GPIO pin connectet to the RSTB pin of the chip. + * @pinmux: Chip's configurable pins configuration. + * @diversity_mode: Chips role when functioning in diversity mode. + * @status_monitor: Polling worker used in polling use case scenarion + * (when IRQ is not avalible). + * @revision: Chip's running firmware revision number(Used for correct + * command set support). + */ + +struct si476x_core { + struct i2c_client *client; + struct regmap *regmap; + int chip_id; + struct mfd_cell cells[SI476X_MFD_CELLS]; + + struct mutex cmd_lock; /* for serializing fm radio operations */ + atomic_t users; + + wait_queue_head_t rds_read_queue; + struct kfifo rds_fifo; + struct work_struct rds_fifo_drainer; + bool rds_drainer_is_working; + struct mutex rds_drainer_status_lock; + + wait_queue_head_t command; + atomic_t cts; + + wait_queue_head_t tuning; + atomic_t stc; + + struct si476x_power_up_args power_up_parameters; + + enum si476x_power_state power_state; + + struct regulator_bulk_data supplies[4]; + + int gpio_reset; + + struct si476x_pinmux pinmux; + enum si476x_phase_diversity_mode diversity_mode; + + atomic_t is_alive; + + struct delayed_work status_monitor; +#define SI476X_WORK_TO_CORE(w) container_of(to_delayed_work(w), \ + struct si476x_core, \ + status_monitor) + + int revision; + + int rds_fifo_depth; +}; + +static inline struct si476x_core *i2c_mfd_cell_to_core(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev->parent); + return i2c_get_clientdata(client); +} + + +/** + * si476x_core_lock() - lock the core device to get an exclusive access + * to it. + */ +static inline void si476x_core_lock(struct si476x_core *core) +{ + mutex_lock(&core->cmd_lock); +} + +/** + * si476x_core_unlock() - unlock the core device to relinquish an + * exclusive access to it. + */ +static inline void si476x_core_unlock(struct si476x_core *core) +{ + mutex_unlock(&core->cmd_lock); +} + +/* *_TUNE_FREQ family of commands accept frequency in multiples of + 10kHz */ +static inline u16 hz_to_si476x(struct si476x_core *core, int freq) +{ + u16 result; + + switch (core->power_up_parameters.func) { + default: + case SI476X_FUNC_FM_RECEIVER: + result = freq / 10000; + break; + case SI476X_FUNC_AM_RECEIVER: + result = freq / 1000; + break; + } + + return result; +} + +static inline int si476x_to_hz(struct si476x_core *core, u16 freq) +{ + int result; + + switch (core->power_up_parameters.func) { + default: + case SI476X_FUNC_FM_RECEIVER: + result = freq * 10000; + break; + case SI476X_FUNC_AM_RECEIVER: + result = freq * 1000; + break; + } + + return result; +} + +/* Since the V4L2_TUNER_CAP_LOW flag is supplied, V4L2 subsystem + * mesures frequency in 62.5 Hz units */ + +static inline int hz_to_v4l2(int freq) +{ + return (freq * 10) / 625; +} + +static inline int v4l2_to_hz(int freq) +{ + return (freq * 625) / 10; +} + +static inline u16 v4l2_to_si476x(struct si476x_core *core, int freq) +{ + return hz_to_si476x(core, v4l2_to_hz(freq)); +} + +static inline int si476x_to_v4l2(struct si476x_core *core, u16 freq) +{ + return hz_to_v4l2(si476x_to_hz(core, freq)); +} + + + +/** + * struct si476x_func_info - structure containing result of the + * FUNC_INFO command. + * + * @firmware.major: Firmware major number. + * @firmware.minor[...]: Firmware minor numbers. + * @patch_id: + * @func: Mode tuner is working in. + */ +struct si476x_func_info { + struct { + u8 major, minor[2]; + } firmware; + u16 patch_id; + enum si476x_func func; +}; + +/** + * struct si476x_power_down_args - structure used to pass parameters + * to POWER_DOWN command + * + * @xosc: true - Power down, but leav oscillator running. + * false - Full power down. + */ +struct si476x_power_down_args { + bool xosc; +}; + +/** + * enum si476x_tunemode - enum representing possible tune modes for + * the chip. + * @SI476X_TM_VALIDATED_NORMAL_TUNE: Unconditionally stay on the new + * channel after tune, tune status is valid. + * @SI476X_TM_INVALIDATED_FAST_TUNE: Unconditionally stay in the new + * channel after tune, tune status invalid. + * @SI476X_TM_VALIDATED_AF_TUNE: Jump back to previous channel if + * metric thresholds are not met. + * @SI476X_TM_VALIDATED_AF_CHECK: Unconditionally jump back to the + * previous channel. + */ +enum si476x_tunemode { + SI476X_TM_VALIDATED_NORMAL_TUNE = 0, + SI476X_TM_INVALIDATED_FAST_TUNE = 1, + SI476X_TM_VALIDATED_AF_TUNE = 2, + SI476X_TM_VALIDATED_AF_CHECK = 3, +}; + +/** + * enum si476x_smoothmetrics - enum containing the possible setting fo + * audio transitioning of the chip + * @SI476X_SM_INITIALIZE_AUDIO: Initialize audio state to match this + * new channel + * @SI476X_SM_TRANSITION_AUDIO: Transition audio state from previous + * channel values to the new values + */ +enum si476x_smoothmetrics { + SI476X_SM_INITIALIZE_AUDIO = 0, + SI476X_SM_TRANSITION_AUDIO = 1, +}; + +/** + * struct si476x_rds_status_report - the structure representing the + * response to 'FM_RD_STATUS' command + * @rdstpptyint: Traffic program flag(TP) and/or program type(PTY) + * code has changed. + * @rdspiint: Program indentifiaction(PI) code has changed. + * @rdssyncint: RDS synchronization has changed. + * @rdsfifoint: RDS was received and the RDS FIFO has at least + * 'FM_RDS_INTERRUPT_FIFO_COUNT' elements in it. + * @tpptyvalid: TP flag and PTY code are valid falg. + * @pivalid: PI code is valid flag. + * @rdssync: RDS is currently synchronized. + * @rdsfifolost: On or more RDS groups have been lost/discarded flag. + * @tp: Current channel's TP flag. + * @pty: Current channel's PTY code. + * @pi: Current channel's PI code. + * @rdsfifoused: Number of blocks remaining in the RDS FIFO (0 if + * empty). + */ +struct si476x_rds_status_report { + bool rdstpptyint, rdspiint, rdssyncint, rdsfifoint; + bool tpptyvalid, pivalid, rdssync, rdsfifolost; + bool tp; + + u8 pty; + u16 pi; + + u8 rdsfifoused; + u8 ble[4]; + + struct v4l2_rds_data rds[4]; +}; + +struct si476x_rsq_status_args { + bool primary; + bool rsqack; + bool attune; + bool cancel; + bool stcack; +}; + +enum si476x_injside { + SI476X_INJSIDE_AUTO = 0, + SI476X_INJSIDE_LOW = 1, + SI476X_INJSIDE_HIGH = 2, +}; + +struct si476x_tune_freq_args { + bool zifsr; + bool hd; + enum si476x_injside injside; + int freq; + enum si476x_tunemode tunemode; + enum si476x_smoothmetrics smoothmetrics; + int antcap; +}; + +int si476x_core_stop(struct si476x_core *, bool); +int si476x_core_start(struct si476x_core *, bool); +int si476x_core_set_power_state(struct si476x_core *, enum si476x_power_state); +bool si476x_core_has_am(struct si476x_core *); +bool si476x_core_has_diversity(struct si476x_core *); +bool si476x_core_is_a_secondary_tuner(struct si476x_core *); +bool si476x_core_is_a_primary_tuner(struct si476x_core *); +bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core); +bool si476x_core_is_powered_up(struct si476x_core *core); + +enum si476x_i2c_type { + SI476X_I2C_SEND, + SI476X_I2C_RECV +}; + +int si476x_core_i2c_xfer(struct si476x_core *, + enum si476x_i2c_type, + char *, int); + + +/* -------------------- si476x-cmd.c ----------------------- */ + +int si476x_core_cmd_func_info(struct si476x_core *, struct si476x_func_info *); +int si476x_core_cmd_set_property(struct si476x_core *, u16, u16); +int si476x_core_cmd_get_property(struct si476x_core *, u16); +int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *, + enum si476x_dclk_config, + enum si476x_dfs_config, + enum si476x_dout_config, + enum si476x_xout_config); +int si476x_core_cmd_zif_pin_cfg(struct si476x_core *, + enum si476x_iqclk_config, + enum si476x_iqfs_config, + enum si476x_iout_config, + enum si476x_qout_config); +int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *, + enum si476x_icin_config, + enum si476x_icip_config, + enum si476x_icon_config, + enum si476x_icop_config); +int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *, + enum si476x_lrout_config); +int si476x_core_cmd_intb_pin_cfg(struct si476x_core *, enum si476x_intb_config, + enum si476x_a1_config); +int si476x_core_cmd_fm_seek_start(struct si476x_core *, bool, bool); +int si476x_core_cmd_am_seek_start(struct si476x_core *, bool, bool); +int si476x_core_cmd_fm_rds_status(struct si476x_core *, bool, bool, bool, + struct si476x_rds_status_report *); +int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *, bool, + struct si476x_rds_blockcount_report *); +int si476x_core_cmd_fm_tune_freq(struct si476x_core *, + struct si476x_tune_freq_args *); +int si476x_core_cmd_am_tune_freq(struct si476x_core *, + struct si476x_tune_freq_args *); +int si476x_core_cmd_am_rsq_status(struct si476x_core *, + struct si476x_rsq_status_args *, + struct si476x_rsq_status_report *); +int si476x_core_cmd_fm_rsq_status(struct si476x_core *, + struct si476x_rsq_status_args *, + struct si476x_rsq_status_report *); +int si476x_core_cmd_power_up(struct si476x_core *, + struct si476x_power_up_args *); +int si476x_core_cmd_power_down(struct si476x_core *, + struct si476x_power_down_args *); +int si476x_core_cmd_fm_phase_div_status(struct si476x_core *); +int si476x_core_cmd_fm_phase_diversity(struct si476x_core *, + enum si476x_phase_diversity_mode); + +int si476x_core_cmd_fm_acf_status(struct si476x_core *, + struct si476x_acf_status_report *); +int si476x_core_cmd_am_acf_status(struct si476x_core *, + struct si476x_acf_status_report *); +int si476x_core_cmd_agc_status(struct si476x_core *, + struct si476x_agc_status_report *); + +enum si476x_power_grid_type { + SI476X_POWER_GRID_50HZ = 0, + SI476X_POWER_GRID_60HZ, +}; + +/* Properties */ + +enum si476x_interrupt_flags { + SI476X_STCIEN = (1 << 0), + SI476X_ACFIEN = (1 << 1), + SI476X_RDSIEN = (1 << 2), + SI476X_RSQIEN = (1 << 3), + + SI476X_ERRIEN = (1 << 6), + SI476X_CTSIEN = (1 << 7), + + SI476X_STCREP = (1 << 8), + SI476X_ACFREP = (1 << 9), + SI476X_RDSREP = (1 << 10), + SI476X_RSQREP = (1 << 11), +}; + +enum si476x_rdsint_sources { + SI476X_RDSTPPTY = (1 << 4), + SI476X_RDSPI = (1 << 3), + SI476X_RDSSYNC = (1 << 1), + SI476X_RDSRECV = (1 << 0), +}; + +enum si476x_status_response_bits { + SI476X_CTS = (1 << 7), + SI476X_ERR = (1 << 6), + /* Status response for WB receiver */ + SI476X_WB_ASQ_INT = (1 << 4), + SI476X_RSQ_INT = (1 << 3), + /* Status response for FM receiver */ + SI476X_FM_RDS_INT = (1 << 2), + SI476X_ACF_INT = (1 << 1), + SI476X_STC_INT = (1 << 0), +}; + +/* -------------------- si476x-prop.c ----------------------- */ + +enum si476x_common_receiver_properties { + SI476X_PROP_INT_CTL_ENABLE = 0x0000, + SI476X_PROP_DIGITAL_IO_INPUT_SAMPLE_RATE = 0x0200, + SI476X_PROP_DIGITAL_IO_INPUT_FORMAT = 0x0201, + SI476X_PROP_DIGITAL_IO_OUTPUT_SAMPLE_RATE = 0x0202, + SI476X_PROP_DIGITAL_IO_OUTPUT_FORMAT = 0x0203, + + SI476X_PROP_SEEK_BAND_BOTTOM = 0x1100, + SI476X_PROP_SEEK_BAND_TOP = 0x1101, + SI476X_PROP_SEEK_FREQUENCY_SPACING = 0x1102, + + SI476X_PROP_VALID_MAX_TUNE_ERROR = 0x2000, + SI476X_PROP_VALID_SNR_THRESHOLD = 0x2003, + SI476X_PROP_VALID_RSSI_THRESHOLD = 0x2004, +}; + +enum si476x_am_receiver_properties { + SI476X_PROP_AUDIO_PWR_LINE_FILTER = 0x0303, +}; + +enum si476x_fm_receiver_properties { + SI476X_PROP_AUDIO_DEEMPHASIS = 0x0302, + + SI476X_PROP_FM_RDS_INTERRUPT_SOURCE = 0x4000, + SI476X_PROP_FM_RDS_INTERRUPT_FIFO_COUNT = 0x4001, + SI476X_PROP_FM_RDS_CONFIG = 0x4002, +}; + +enum si476x_prop_audio_pwr_line_filter_bits { + SI476X_PROP_PWR_HARMONICS_MASK = 0x001f, + SI476X_PROP_PWR_GRID_MASK = 0x0100, + SI476X_PROP_PWR_ENABLE_MASK = 0x0200, + SI476X_PROP_PWR_GRID_50HZ = 0x0000, + SI476X_PROP_PWR_GRID_60HZ = 0x0100, +}; + +enum si476x_prop_fm_rds_config_bits { + SI476X_PROP_RDSEN_MASK = 0x1, + SI476X_PROP_RDSEN = 0x1, +}; + + +struct regmap *devm_regmap_init_si476x(struct si476x_core *); + +#endif /* SI476X_CORE_H */ diff --git a/include/linux/mfd/si476x-platform.h b/include/linux/mfd/si476x-platform.h new file mode 100644 index 000000000000..88bb93b7a9d5 --- /dev/null +++ b/include/linux/mfd/si476x-platform.h @@ -0,0 +1,267 @@ +/* + * include/media/si476x-platform.h -- Platform data specific definitions + * + * Copyright (C) 2013 Andrey Smirnov + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#ifndef __SI476X_PLATFORM_H__ +#define __SI476X_PLATFORM_H__ + +/* It is possible to select one of the four adresses using pins A0 + * and A1 on SI476x */ +#define SI476X_I2C_ADDR_1 0x60 +#define SI476X_I2C_ADDR_2 0x61 +#define SI476X_I2C_ADDR_3 0x62 +#define SI476X_I2C_ADDR_4 0x63 + +enum si476x_iqclk_config { + SI476X_IQCLK_NOOP = 0, + SI476X_IQCLK_TRISTATE = 1, + SI476X_IQCLK_IQ = 21, +}; +enum si476x_iqfs_config { + SI476X_IQFS_NOOP = 0, + SI476X_IQFS_TRISTATE = 1, + SI476X_IQFS_IQ = 21, +}; +enum si476x_iout_config { + SI476X_IOUT_NOOP = 0, + SI476X_IOUT_TRISTATE = 1, + SI476X_IOUT_OUTPUT = 22, +}; +enum si476x_qout_config { + SI476X_QOUT_NOOP = 0, + SI476X_QOUT_TRISTATE = 1, + SI476X_QOUT_OUTPUT = 22, +}; + +enum si476x_dclk_config { + SI476X_DCLK_NOOP = 0, + SI476X_DCLK_TRISTATE = 1, + SI476X_DCLK_DAUDIO = 10, +}; + +enum si476x_dfs_config { + SI476X_DFS_NOOP = 0, + SI476X_DFS_TRISTATE = 1, + SI476X_DFS_DAUDIO = 10, +}; + +enum si476x_dout_config { + SI476X_DOUT_NOOP = 0, + SI476X_DOUT_TRISTATE = 1, + SI476X_DOUT_I2S_OUTPUT = 12, + SI476X_DOUT_I2S_INPUT = 13, +}; + +enum si476x_xout_config { + SI476X_XOUT_NOOP = 0, + SI476X_XOUT_TRISTATE = 1, + SI476X_XOUT_I2S_INPUT = 13, + SI476X_XOUT_MODE_SELECT = 23, +}; + +enum si476x_icin_config { + SI476X_ICIN_NOOP = 0, + SI476X_ICIN_TRISTATE = 1, + SI476X_ICIN_GPO1_HIGH = 2, + SI476X_ICIN_GPO1_LOW = 3, + SI476X_ICIN_IC_LINK = 30, +}; + +enum si476x_icip_config { + SI476X_ICIP_NOOP = 0, + SI476X_ICIP_TRISTATE = 1, + SI476X_ICIP_GPO2_HIGH = 2, + SI476X_ICIP_GPO2_LOW = 3, + SI476X_ICIP_IC_LINK = 30, +}; + +enum si476x_icon_config { + SI476X_ICON_NOOP = 0, + SI476X_ICON_TRISTATE = 1, + SI476X_ICON_I2S = 10, + SI476X_ICON_IC_LINK = 30, +}; + +enum si476x_icop_config { + SI476X_ICOP_NOOP = 0, + SI476X_ICOP_TRISTATE = 1, + SI476X_ICOP_I2S = 10, + SI476X_ICOP_IC_LINK = 30, +}; + + +enum si476x_lrout_config { + SI476X_LROUT_NOOP = 0, + SI476X_LROUT_TRISTATE = 1, + SI476X_LROUT_AUDIO = 2, + SI476X_LROUT_MPX = 3, +}; + + +enum si476x_intb_config { + SI476X_INTB_NOOP = 0, + SI476X_INTB_TRISTATE = 1, + SI476X_INTB_DAUDIO = 10, + SI476X_INTB_IRQ = 40, +}; + +enum si476x_a1_config { + SI476X_A1_NOOP = 0, + SI476X_A1_TRISTATE = 1, + SI476X_A1_IRQ = 40, +}; + + +struct si476x_pinmux { + enum si476x_dclk_config dclk; + enum si476x_dfs_config dfs; + enum si476x_dout_config dout; + enum si476x_xout_config xout; + + enum si476x_iqclk_config iqclk; + enum si476x_iqfs_config iqfs; + enum si476x_iout_config iout; + enum si476x_qout_config qout; + + enum si476x_icin_config icin; + enum si476x_icip_config icip; + enum si476x_icon_config icon; + enum si476x_icop_config icop; + + enum si476x_lrout_config lrout; + + enum si476x_intb_config intb; + enum si476x_a1_config a1; +}; + +enum si476x_ibias6x { + SI476X_IBIAS6X_OTHER = 0, + SI476X_IBIAS6X_RCVR1_NON_4MHZ_CLK = 1, +}; + +enum si476x_xstart { + SI476X_XSTART_MULTIPLE_TUNER = 0x11, + SI476X_XSTART_NORMAL = 0x77, +}; + +enum si476x_freq { + SI476X_FREQ_4_MHZ = 0, + SI476X_FREQ_37P209375_MHZ = 1, + SI476X_FREQ_36P4_MHZ = 2, + SI476X_FREQ_37P8_MHZ = 3, +}; + +enum si476x_xmode { + SI476X_XMODE_CRYSTAL_RCVR1 = 1, + SI476X_XMODE_EXT_CLOCK = 2, + SI476X_XMODE_CRYSTAL_RCVR2_3 = 3, +}; + +enum si476x_xbiashc { + SI476X_XBIASHC_SINGLE_RECEIVER = 0, + SI476X_XBIASHC_MULTIPLE_RECEIVER = 1, +}; + +enum si476x_xbias { + SI476X_XBIAS_RCVR2_3 = 0, + SI476X_XBIAS_4MHZ_RCVR1 = 3, + SI476X_XBIAS_RCVR1 = 7, +}; + +enum si476x_func { + SI476X_FUNC_BOOTLOADER = 0, + SI476X_FUNC_FM_RECEIVER = 1, + SI476X_FUNC_AM_RECEIVER = 2, + SI476X_FUNC_WB_RECEIVER = 3, +}; + + +/** + * @xcload: Selects the amount of additional on-chip capacitance to + * be connected between XTAL1 and gnd and between XTAL2 and + * GND. One half of the capacitance value shown here is the + * additional load capacitance presented to the xtal. The + * minimum step size is 0.277 pF. Recommended value is 0x28 + * but it will be layout dependent. Range is 0–0x3F i.e. + * (0–16.33 pF) + * @ctsien: enable CTSINT(interrupt request when CTS condition + * arises) when set + * @intsel: when set A1 pin becomes the interrupt pin; otherwise, + * INTB is the interrupt pin + * @func: selects the boot function of the device. I.e. + * SI476X_BOOTLOADER - Boot loader + * SI476X_FM_RECEIVER - FM receiver + * SI476X_AM_RECEIVER - AM receiver + * SI476X_WB_RECEIVER - Weatherband receiver + * @freq: oscillator's crystal frequency: + * SI476X_XTAL_37P209375_MHZ - 37.209375 Mhz + * SI476X_XTAL_36P4_MHZ - 36.4 Mhz + * SI476X_XTAL_37P8_MHZ - 37.8 Mhz + */ +struct si476x_power_up_args { + enum si476x_ibias6x ibias6x; + enum si476x_xstart xstart; + u8 xcload; + bool fastboot; + enum si476x_xbiashc xbiashc; + enum si476x_xbias xbias; + enum si476x_func func; + enum si476x_freq freq; + enum si476x_xmode xmode; +}; + + +/** + * enum si476x_phase_diversity_mode - possbile phase diversity modes + * for SI4764/5/6/7 chips. + * + * @SI476X_PHDIV_DISABLED: Phase diversity feature is + * disabled. + * @SI476X_PHDIV_PRIMARY_COMBINING: Tuner works as a primary tuner + * in combination with a + * secondary one. + * @SI476X_PHDIV_PRIMARY_ANTENNA: Tuner works as a primary tuner + * using only its own antenna. + * @SI476X_PHDIV_SECONDARY_ANTENNA: Tuner works as a primary tuner + * usning seconary tuner's antenna. + * @SI476X_PHDIV_SECONDARY_COMBINING: Tuner works as a secondary + * tuner in combination with the + * primary one. + */ +enum si476x_phase_diversity_mode { + SI476X_PHDIV_DISABLED = 0, + SI476X_PHDIV_PRIMARY_COMBINING = 1, + SI476X_PHDIV_PRIMARY_ANTENNA = 2, + SI476X_PHDIV_SECONDARY_ANTENNA = 3, + SI476X_PHDIV_SECONDARY_COMBINING = 5, +}; + + +/* + * Platform dependent definition + */ +struct si476x_platform_data { + int gpio_reset; /* < 0 if not used */ + + struct si476x_power_up_args power_up_parameters; + enum si476x_phase_diversity_mode diversity_mode; + + struct si476x_pinmux pinmux; +}; + + +#endif /* __SI476X_PLATFORM_H__ */ diff --git a/include/linux/mfd/si476x-reports.h b/include/linux/mfd/si476x-reports.h new file mode 100644 index 000000000000..e0b9455a79c0 --- /dev/null +++ b/include/linux/mfd/si476x-reports.h @@ -0,0 +1,163 @@ +/* + * include/media/si476x-platform.h -- Definitions of the data formats + * returned by debugfs hooks + * + * Copyright (C) 2013 Andrey Smirnov + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#ifndef __SI476X_REPORTS_H__ +#define __SI476X_REPORTS_H__ + +/** + * struct si476x_rsq_status - structure containing received signal + * quality + * @multhint: Multipath Detect High. + * true - Indicatedes that the value is below + * FM_RSQ_MULTIPATH_HIGH_THRESHOLD + * false - Indicatedes that the value is above + * FM_RSQ_MULTIPATH_HIGH_THRESHOLD + * @multlint: Multipath Detect Low. + * true - Indicatedes that the value is below + * FM_RSQ_MULTIPATH_LOW_THRESHOLD + * false - Indicatedes that the value is above + * FM_RSQ_MULTIPATH_LOW_THRESHOLD + * @snrhint: SNR Detect High. + * true - Indicatedes that the value is below + * FM_RSQ_SNR_HIGH_THRESHOLD + * false - Indicatedes that the value is above + * FM_RSQ_SNR_HIGH_THRESHOLD + * @snrlint: SNR Detect Low. + * true - Indicatedes that the value is below + * FM_RSQ_SNR_LOW_THRESHOLD + * false - Indicatedes that the value is above + * FM_RSQ_SNR_LOW_THRESHOLD + * @rssihint: RSSI Detect High. + * true - Indicatedes that the value is below + * FM_RSQ_RSSI_HIGH_THRESHOLD + * false - Indicatedes that the value is above + * FM_RSQ_RSSI_HIGH_THRESHOLD + * @rssilint: RSSI Detect Low. + * true - Indicatedes that the value is below + * FM_RSQ_RSSI_LOW_THRESHOLD + * false - Indicatedes that the value is above + * FM_RSQ_RSSI_LOW_THRESHOLD + * @bltf: Band Limit. + * Set if seek command hits the band limit or wrapped to + * the original frequency. + * @snr_ready: SNR measurement in progress. + * @rssiready: RSSI measurement in progress. + * @afcrl: Set if FREQOFF >= MAX_TUNE_ERROR + * @valid: Set if the channel is valid + * rssi < FM_VALID_RSSI_THRESHOLD + * snr < FM_VALID_SNR_THRESHOLD + * tune_error < FM_VALID_MAX_TUNE_ERROR + * @readfreq: Current tuned frequency. + * @freqoff: Signed frequency offset. + * @rssi: Received Signal Strength Indicator(dBuV). + * @snr: RF SNR Indicator(dB). + * @lassi: + * @hassi: Low/High side Adjacent(100 kHz) Channel Strength Indicator + * @mult: Multipath indicator + * @dev: Who knows? But values may vary. + * @readantcap: Antenna tuning capacity value. + * @assi: Adjacent Channel(+/- 200kHz) Strength Indicator + * @usn: Ultrasonic Noise Inticator in -DBFS + */ +struct si476x_rsq_status_report { + __u8 multhint, multlint; + __u8 snrhint, snrlint; + __u8 rssihint, rssilint; + __u8 bltf; + __u8 snr_ready; + __u8 rssiready; + __u8 injside; + __u8 afcrl; + __u8 valid; + + __u16 readfreq; + __s8 freqoff; + __s8 rssi; + __s8 snr; + __s8 issi; + __s8 lassi, hassi; + __s8 mult; + __u8 dev; + __u16 readantcap; + __s8 assi; + __s8 usn; + + __u8 pilotdev; + __u8 rdsdev; + __u8 assidev; + __u8 strongdev; + __u16 rdspi; +} __packed; + +/** + * si476x_acf_status_report - ACF report results + * + * @blend_int: If set, indicates that stereo separation has crossed + * below the blend threshold as set by FM_ACF_BLEND_THRESHOLD + * @hblend_int: If set, indicates that HiBlend cutoff frequency is + * lower than threshold as set by FM_ACF_HBLEND_THRESHOLD + * @hicut_int: If set, indicates that HiCut cutoff frequency is lower + * than the threshold set by ACF_ + + */ +struct si476x_acf_status_report { + __u8 blend_int; + __u8 hblend_int; + __u8 hicut_int; + __u8 chbw_int; + __u8 softmute_int; + __u8 smute; + __u8 smattn; + __u8 chbw; + __u8 hicut; + __u8 hiblend; + __u8 pilot; + __u8 stblend; +} __packed; + +enum si476x_fmagc { + SI476X_FMAGC_10K_OHM = 0, + SI476X_FMAGC_800_OHM = 1, + SI476X_FMAGC_400_OHM = 2, + SI476X_FMAGC_200_OHM = 4, + SI476X_FMAGC_100_OHM = 8, + SI476X_FMAGC_50_OHM = 16, + SI476X_FMAGC_25_OHM = 32, + SI476X_FMAGC_12P5_OHM = 64, + SI476X_FMAGC_6P25_OHM = 128, +}; + +struct si476x_agc_status_report { + __u8 mxhi; + __u8 mxlo; + __u8 lnahi; + __u8 lnalo; + __u8 fmagc1; + __u8 fmagc2; + __u8 pgagain; + __u8 fmwblang; +} __packed; + +struct si476x_rds_blockcount_report { + __u16 expected; + __u16 received; + __u16 uncorrectable; +} __packed; + +#endif /* __SI476X_REPORTS_H__ */ diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index 383ac1512a39..48395a69a7e9 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -26,6 +26,7 @@ enum stmpe_partnum { STMPE801, STMPE811, STMPE1601, + STMPE1801, STMPE2401, STMPE2403, STMPE_NBR_PARTS @@ -39,6 +40,7 @@ enum { STMPE_IDX_CHIP_ID, STMPE_IDX_ICR_LSB, STMPE_IDX_IER_LSB, + STMPE_IDX_ISR_LSB, STMPE_IDX_ISR_MSB, STMPE_IDX_GPMR_LSB, STMPE_IDX_GPSR_LSB, @@ -49,6 +51,7 @@ enum { STMPE_IDX_GPFER_LSB, STMPE_IDX_GPAFR_U_MSB, STMPE_IDX_IEGPIOR_LSB, + STMPE_IDX_ISGPIOR_LSB, STMPE_IDX_ISGPIOR_MSB, STMPE_IDX_MAX, }; diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h index 6aeb6b8da64d..b473577f36db 100644 --- a/include/linux/mfd/syscon.h +++ b/include/linux/mfd/syscon.h @@ -15,8 +15,11 @@ #ifndef __LINUX_MFD_SYSCON_H__ #define __LINUX_MFD_SYSCON_H__ +struct device_node; + extern struct regmap *syscon_node_to_regmap(struct device_node *np); extern struct regmap *syscon_regmap_lookup_by_compatible(const char *s); +extern struct regmap *syscon_regmap_lookup_by_pdevname(const char *s); extern struct regmap *syscon_regmap_lookup_by_phandle( struct device_node *np, const char *property); diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h index 998628a2b08b..3f43069413e7 100644 --- a/include/linux/mfd/tps65090.h +++ b/include/linux/mfd/tps65090.h @@ -27,6 +27,7 @@ /* TPS65090 IRQs */ enum { + TPS65090_IRQ_INTERRUPT, TPS65090_IRQ_VAC_STATUS_CHANGE, TPS65090_IRQ_VSYS_STATUS_CHANGE, TPS65090_IRQ_BAT_STATUS_CHANGE, diff --git a/include/linux/of.h b/include/linux/of.h index fb2002f3c7dc..1b671c3809b8 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -356,6 +356,11 @@ static inline struct device_node *of_find_node_by_name(struct device_node *from, return NULL; } +static inline struct device_node *of_get_parent(const struct device_node *node) +{ + return NULL; +} + static inline bool of_have_populated_dt(void) { return false; diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h index d21b33c4c6ca..2e9ee4d1c676 100644 --- a/include/linux/ucb1400.h +++ b/include/linux/ucb1400.h @@ -83,15 +83,12 @@ #define UCB_ID 0x7e #define UCB_ID_1400 0x4304 -struct ucb1400_gpio_data { - int gpio_offset; - int (*gpio_setup)(struct device *dev, int ngpio); - int (*gpio_teardown)(struct device *dev, int ngpio); -}; - struct ucb1400_gpio { struct gpio_chip gc; struct snd_ac97 *ac97; + int gpio_offset; + int (*gpio_setup)(struct device *dev, int ngpio); + int (*gpio_teardown)(struct device *dev, int ngpio); }; struct ucb1400_ts { @@ -110,6 +107,9 @@ struct ucb1400 { struct ucb1400_pdata { int irq; + int gpio_offset; + int (*gpio_setup)(struct device *dev, int ngpio); + int (*gpio_teardown)(struct device *dev, int ngpio); }; static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg) @@ -162,10 +162,4 @@ static inline void ucb1400_adc_disable(struct snd_ac97 *ac97) unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel, int adcsync); -#ifdef CONFIG_GPIO_UCB1400 -void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data); -#else -static inline void ucb1400_gpio_set_data(struct ucb1400_gpio_data *data) {} -#endif - #endif |