diff options
Diffstat (limited to 'include/media/msp3400.h')
| -rw-r--r-- | include/media/msp3400.h | 221 |
1 files changed, 221 insertions, 0 deletions
diff --git a/include/media/msp3400.h b/include/media/msp3400.h new file mode 100644 index 000000000000..26e26585273f --- /dev/null +++ b/include/media/msp3400.h @@ -0,0 +1,221 @@ +/* + msp3400.h - definition for msp3400 inputs and outputs + + Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _MSP3400_H_ +#define _MSP3400_H_ + +/* msp3400 routing + =============== + + The msp3400 has a complicated routing scheme with many possible + combinations. The details are all in the datasheets but I will try + to give a short description here. + + Inputs + ====== + + There are 1) tuner inputs, 2) I2S inputs, 3) SCART inputs. You will have + to select which tuner input to use and which SCART input to use. The + selected tuner input, the selected SCART input and all I2S inputs go to + the DSP (the tuner input first goes through the demodulator). + + The DSP handles things like volume, bass/treble, balance, and some chips + have support for surround sound. It has several outputs: MAIN, AUX, I2S + and SCART1/2. Each output can select which DSP input to use. So the MAIN + output can select the tuner input while at the same time the SCART1 output + uses the I2S input. + + Outputs + ======= + + Most DSP outputs are also the outputs of the msp3400. However, the SCART + outputs of the msp3400 can select which input to use: either the SCART1 or + SCART2 output from the DSP, or the msp3400 SCART inputs, thus completely + bypassing the DSP. + + Summary + ======= + + So to specify a complete routing scheme for the msp3400 you will have to + specify in the 'input' field of the v4l2_routing struct: + + 1) which tuner input to use + 2) which SCART input to use + 3) which DSP input to use for each DSP output + + And in the 'output' field of the v4l2_routing struct you specify: + + 1) which SCART input to use for each SCART output + + Depending on how the msp is wired to the other components you can + ignore or mute certain inputs or outputs. + + Also, depending on the msp version only a subset of the inputs or + outputs may be present. At the end of this header some tables are + added containing a list of what is available for each msp version. + */ + +/* Inputs to the DSP unit: two independent selections have to be made: + 1) the tuner (SIF) input + 2) the SCART input + Bits 0-2 are used for the SCART input select, bit 3 is used for the tuner + input, bits 4-7 are reserved. + */ + +/* SCART input to DSP selection */ +#define MSP_IN_SCART_1 0 /* Pin SC1_IN */ +#define MSP_IN_SCART_2 1 /* Pin SC2_IN */ +#define MSP_IN_SCART_3 2 /* Pin SC3_IN */ +#define MSP_IN_SCART_4 3 /* Pin SC4_IN */ +#define MSP_IN_MONO 6 /* Pin MONO_IN */ +#define MSP_IN_MUTE 7 /* Mute DSP input */ +#define MSP_SCART_TO_DSP(in) (in) +/* Tuner input to demodulator and DSP selection */ +#define MSP_IN_TUNER_1 0 /* Analog Sound IF input pin ANA_IN1 */ +#define MSP_IN_TUNER_2 1 /* Analog Sound IF input pin ANA_IN2 */ +#define MSP_TUNER_TO_DSP(in) ((in) << 3) + +/* The msp has up to 5 DSP outputs, each output can independently select + a DSP input. + + The DSP outputs are: loudspeaker output (aka MAIN), headphones output + (aka AUX), SCART1 DA output, SCART2 DA output and an I2S output. + There also is a quasi-peak detector output, but that is not used by + this driver and is set to the same input as the loudspeaker output. + Not all outputs are supported by all msp models. Setting the input + of an unsupported output will be ignored by the driver. + + There are up to 16 DSP inputs to choose from, so each output is + assigned 4 bits. + + Note: the 44x8G can mix two inputs and feed the result back to the + DSP. This is currently not implemented. Also not implemented is the + multi-channel capable I2S3 input of the 44x0G. If someone can demonstrate + a need for one of those features then additional support can be added. */ +#define MSP_DSP_OUT_TUNER 0 /* Tuner output */ +#define MSP_DSP_OUT_SCART 2 /* SCART output */ +#define MSP_DSP_OUT_I2S1 5 /* I2S1 output */ +#define MSP_DSP_OUT_I2S2 6 /* I2S2 output */ +#define MSP_DSP_OUT_I2S3 7 /* I2S3 output */ +#define MSP_DSP_OUT_MAIN_AVC 11 /* MAIN AVC processed output */ +#define MSP_DSP_OUT_MAIN 12 /* MAIN output */ +#define MSP_DSP_OUT_AUX 13 /* AUX output */ +#define MSP_DSP_TO_MAIN(in) ((in) << 4) +#define MSP_DSP_TO_AUX(in) ((in) << 8) +#define MSP_DSP_TO_SCART1(in) ((in) << 12) +#define MSP_DSP_TO_SCART2(in) ((in) << 16) +#define MSP_DSP_TO_I2S(in) ((in) << 20) + +/* Output SCART select: the SCART outputs can select which input + to use. */ +#define MSP_OUT_SCART1 0 /* SCART1 input, bypassing the DSP */ +#define MSP_OUT_SCART2 1 /* SCART2 input, bypassing the DSP */ +#define MSP_OUT_SCART3 2 /* SCART3 input, bypassing the DSP */ +#define MSP_OUT_SCART4 3 /* SCART4 input, bypassing the DSP */ +#define MSP_OUT_SCART1_DA 4 /* DSP SCART1 output */ +#define MSP_OUT_SCART2_DA 5 /* DSP SCART2 output */ +#define MSP_OUT_MONO 6 /* MONO input, bypassing the DSP */ +#define MSP_OUT_MUTE 7 /* MUTE output */ +#define MSP_OUT_TO_SCART1(in) (in) +#define MSP_OUT_TO_SCART2(in) ((in) << 4) + +/* Shortcut macros */ +#define MSP_INPUT(sc, t, main_aux_src, sc_i2s_src) \ + (MSP_SCART_TO_DSP(sc) | \ + MSP_TUNER_TO_DSP(t) | \ + MSP_DSP_TO_MAIN(main_aux_src) | \ + MSP_DSP_TO_AUX(main_aux_src) | \ + MSP_DSP_TO_SCART1(sc_i2s_src) | \ + MSP_DSP_TO_SCART2(sc_i2s_src) | \ + MSP_DSP_TO_I2S(sc_i2s_src)) +#define MSP_OUTPUT(sc) \ + (MSP_OUT_TO_SCART1(sc) | \ + MSP_OUT_TO_SCART2(sc)) + +/* Tuner inputs vs. msp version */ +/* Chip TUNER_1 TUNER_2 + ------------------------- + msp34x0b y y + msp34x0c y y + msp34x0d y y + msp34x5d y n + msp34x7d y n + msp34x0g y y + msp34x1g y y + msp34x2g y y + msp34x5g y n + msp34x7g y n + msp44x0g y y + msp44x8g y y + */ + +/* SCART inputs vs. msp version */ +/* Chip SC1 SC2 SC3 SC4 + ------------------------- + msp34x0b y y y n + msp34x0c y y y n + msp34x0d y y y y + msp34x5d y y n n + msp34x7d y n n n + msp34x0g y y y y + msp34x1g y y y y + msp34x2g y y y y + msp34x5g y y n n + msp34x7g y n n n + msp44x0g y y y y + msp44x8g y y y y + */ + +/* DSP inputs vs. msp version (tuner and SCART inputs are always available) */ +/* Chip I2S1 I2S2 I2S3 MAIN_AVC MAIN AUX + ------------------------------------------ + msp34x0b y n n n n n + msp34x0c y y n n n n + msp34x0d y y n n n n + msp34x5d y y n n n n + msp34x7d n n n n n n + msp34x0g y y n n n n + msp34x1g y y n n n n + msp34x2g y y n y y y + msp34x5g y y n n n n + msp34x7g n n n n n n + msp44x0g y y y y y y + msp44x8g y y y n n n + */ + +/* DSP outputs vs. msp version */ +/* Chip MAIN AUX SCART1 SCART2 I2S + ------------------------------------ + msp34x0b y y y n y + msp34x0c y y y n y + msp34x0d y y y y y + msp34x5d y n y n y + msp34x7d y n y n n + msp34x0g y y y y y + msp34x1g y y y y y + msp34x2g y y y y y + msp34x5g y n y n y + msp34x7g y n y n n + msp44x0g y y y y y + msp44x8g y y y y y + */ + +#endif /* MSP3400_H */ + |