diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 170 |
1 files changed, 130 insertions, 40 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 3d874c620219..a6492e9bca97 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -206,10 +206,12 @@ struct ieee80211_supported_band { * struct vif_params - describes virtual interface parameters * @mesh_id: mesh ID to use * @mesh_id_len: length of the mesh ID + * @use_4addr: use 4-address frames */ struct vif_params { u8 *mesh_id; int mesh_id_len; + int use_4addr; }; /** @@ -233,6 +235,35 @@ struct key_params { }; /** + * enum survey_info_flags - survey information flags + * + * Used by the driver to indicate which info in &struct survey_info + * it has filled in during the get_survey(). + */ +enum survey_info_flags { + SURVEY_INFO_NOISE_DBM = 1<<0, +}; + +/** + * struct survey_info - channel survey response + * + * Used by dump_survey() to report back per-channel survey information. + * + * @channel: the channel this survey record reports, mandatory + * @filled: bitflag of flags from &enum survey_info_flags + * @noise: channel noise in dBm. This and all following fields are + * optional + * + * This structure can later be expanded with things like + * channel duty cycle etc. + */ +struct survey_info { + struct ieee80211_channel *channel; + u32 filled; + s8 noise; +}; + +/** * struct beacon_parameters - beacon parameters * * Used to configure the beacon for an interface. @@ -418,7 +449,7 @@ enum monitor_flags { * in during get_station() or dump_station(). * * MPATH_INFO_FRAME_QLEN: @frame_qlen filled - * MPATH_INFO_DSN: @dsn filled + * MPATH_INFO_SN: @sn filled * MPATH_INFO_METRIC: @metric filled * MPATH_INFO_EXPTIME: @exptime filled * MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled @@ -427,7 +458,7 @@ enum monitor_flags { */ enum mpath_info_flags { MPATH_INFO_FRAME_QLEN = BIT(0), - MPATH_INFO_DSN = BIT(1), + MPATH_INFO_SN = BIT(1), MPATH_INFO_METRIC = BIT(2), MPATH_INFO_EXPTIME = BIT(3), MPATH_INFO_DISCOVERY_TIMEOUT = BIT(4), @@ -442,7 +473,7 @@ enum mpath_info_flags { * * @filled: bitfield of flags from &enum mpath_info_flags * @frame_qlen: number of queued frames for this destination - * @dsn: destination sequence number + * @sn: target sequence number * @metric: metric (cost) of this mesh path * @exptime: expiration time for the mesh path from now, in msecs * @flags: mesh path flags @@ -456,7 +487,7 @@ enum mpath_info_flags { struct mpath_info { u32 filled; u32 frame_qlen; - u32 dsn; + u32 sn; u32 metric; u32 exptime; u32 discovery_timeout; @@ -506,6 +537,7 @@ struct mesh_config { u32 dot11MeshHWMPactivePathTimeout; u16 dot11MeshHWMPpreqMinInterval; u16 dot11MeshHWMPnetDiameterTraversalTime; + u8 dot11MeshHWMPRootMode; }; /** @@ -941,6 +973,8 @@ struct cfg80211_bitrate_mask { * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting * functions to adjust rfkill hw state * + * @dump_survey: get site survey information. + * * @testmode_cmd: run a test mode command */ struct cfg80211_ops { @@ -1060,6 +1094,9 @@ struct cfg80211_ops { const u8 *peer, const struct cfg80211_bitrate_mask *mask); + int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev, + int idx, struct survey_info *info); + /* some temporary stuff to finish wext */ int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, bool enabled, int timeout); @@ -1071,27 +1108,50 @@ struct cfg80211_ops { */ /** - * struct wiphy - wireless hardware description - * @idx: the wiphy index assigned to this item - * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name> - * @custom_regulatory: tells us the driver for this device + * enum wiphy_flags - wiphy capability flags + * + * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device * has its own custom regulatory domain and cannot identify the * ISO / IEC 3166 alpha2 it belongs to. When this is enabled * we will disregard the first regulatory hint (when the * initiator is %REGDOM_SET_BY_CORE). - * @strict_regulatory: tells us the driver for this device will ignore - * regulatory domain settings until it gets its own regulatory domain - * via its regulatory_hint(). After its gets its own regulatory domain - * it will only allow further regulatory domain settings to further - * enhance compliance. For example if channel 13 and 14 are disabled - * by this regulatory domain no user regulatory domain can enable these - * channels at a later time. This can be used for devices which do not - * have calibration information gauranteed for frequencies or settings - * outside of its regulatory domain. - * @disable_beacon_hints: enable this if your driver needs to ensure that - * passive scan flags and beaconing flags may not be lifted by cfg80211 - * due to regulatory beacon hints. For more information on beacon + * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will + * ignore regulatory domain settings until it gets its own regulatory + * domain via its regulatory_hint(). After its gets its own regulatory + * domain it will only allow further regulatory domain settings to + * further enhance compliance. For example if channel 13 and 14 are + * disabled by this regulatory domain no user regulatory domain can + * enable these channels at a later time. This can be used for devices + * which do not have calibration information gauranteed for frequencies + * or settings outside of its regulatory domain. + * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure + * that passive scan flags and beaconing flags may not be lifted by + * cfg80211 due to regulatory beacon hints. For more information on beacon * hints read the documenation for regulatory_hint_found_beacon() + * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this + * wiphy at all + * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled + * by default -- this flag will be set depending on the kernel's default + * on wiphy_new(), but can be changed by the driver if it has a good + * reason to override the default + * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station + * on a VLAN interface) + * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station + */ +enum wiphy_flags { + WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), + WIPHY_FLAG_STRICT_REGULATORY = BIT(1), + WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2), + WIPHY_FLAG_NETNS_OK = BIT(3), + WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), + WIPHY_FLAG_4ADDR_AP = BIT(5), + WIPHY_FLAG_4ADDR_STATION = BIT(6), +}; + +/** + * struct wiphy - wireless hardware description + * @idx: the wiphy index assigned to this item + * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name> * @reg_notifier: the driver's regulatory notification callback * @regd: the driver's regulatory domain, if one was requested via * the regulatory_hint() API. This can be used by the driver @@ -1106,11 +1166,6 @@ struct cfg80211_ops { * -1 = fragmentation disabled, only odd values >= 256 used * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled * @net: the network namespace this wiphy currently lives in - * @netnsok: if set to false, do not allow changing the netns of this - * wiphy at all - * @ps_default: default for powersave, will be set depending on the - * kernel's default on wiphy_new(), but can be changed by the - * driver if it has a good reason to override the default */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -1121,12 +1176,7 @@ struct wiphy { /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ u16 interface_modes; - bool custom_regulatory; - bool strict_regulatory; - bool disable_beacon_hints; - - bool netnsok; - bool ps_default; + u32 flags; enum cfg80211_signal_type signal_type; @@ -1142,6 +1192,9 @@ struct wiphy { u32 frag_threshold; u32 rts_threshold; + char fw_version[ETHTOOL_BUSINFO_LEN]; + u32 hw_version; + /* If multiple wiphys are registered and you're handed e.g. * a regular netdev with assigned ieee80211_ptr, you won't * know whether it points to a wiphy your driver has registered @@ -1171,6 +1224,10 @@ struct wiphy { struct net *_net; #endif +#ifdef CONFIG_CFG80211_WEXT + const struct iw_handler_def *wext; +#endif + char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); }; @@ -1314,6 +1371,10 @@ struct cfg80211_cached_keys; * @ssid_len: (private) Used by the internal configuration code * @wext: (private) Used by the internal wireless extensions compat code * @wext_bssid: (private) Used by the internal wireless extensions compat code + * @use_4addr: indicates 4addr mode is used on this interface, must be + * set by driver (if supported) on add_interface BEFORE registering the + * netdev and may otherwise be used by driver read-only, will be update + * by cfg80211 on change_interface */ struct wireless_dev { struct wiphy *wiphy; @@ -1327,6 +1388,8 @@ struct wireless_dev { struct work_struct cleanup_work; + bool use_4addr; + /* currently used for IBSS and SME - might be rearranged later */ u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 ssid_len; @@ -1345,7 +1408,7 @@ struct wireless_dev { struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES]; struct cfg80211_internal_bss *current_bss; /* associated / joined */ -#ifdef CONFIG_WIRELESS_EXT +#ifdef CONFIG_CFG80211_WEXT /* wext data */ struct { struct cfg80211_ibss_params ibss; @@ -1776,6 +1839,18 @@ void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr); /** + * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled + * @dev: network device + * @addr: The MAC address of the device with which the authentication timed out + * + * When a pending authentication had no action yet, the driver may decide + * to not send a deauth frame, but in that case must calls this function + * to tell cfg80211 about this decision. It is only valid to call this + * function within the deauth() callback. + */ +void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr); + +/** * cfg80211_send_rx_assoc - notification of processed association * @dev: network device * @buf: (re)association response frame (header + body) @@ -1802,30 +1877,45 @@ void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr); * @dev: network device * @buf: deauthentication frame (header + body) * @len: length of the frame data - * @cookie: cookie from ->deauth if called within that callback, - * %NULL otherwise * * This function is called whenever deauthentication has been processed in * station mode. This includes both received deauthentication frames and * locally generated ones. This function may sleep. */ -void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len, - void *cookie); +void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); + +/** + * __cfg80211_send_deauth - notification of processed deauthentication + * @dev: network device + * @buf: deauthentication frame (header + body) + * @len: length of the frame data + * + * Like cfg80211_send_deauth(), but doesn't take the wdev lock. + */ +void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); /** * cfg80211_send_disassoc - notification of processed disassociation * @dev: network device * @buf: disassociation response frame (header + body) * @len: length of the frame data - * @cookie: cookie from ->disassoc if called within that callback, - * %NULL otherwise * * This function is called whenever disassociation has been processed in * station mode. This includes both received disassociation frames and locally * generated ones. This function may sleep. */ -void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len, - void *cookie); +void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len); + +/** + * __cfg80211_send_disassoc - notification of processed disassociation + * @dev: network device + * @buf: disassociation response frame (header + body) + * @len: length of the frame data + * + * Like cfg80211_send_disassoc(), but doesn't take the wdev lock. + */ +void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, + size_t len); /** * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP) |