diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 186 |
1 files changed, 181 insertions, 5 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 396e8fc8910e..748de7bc53cc 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -426,6 +426,7 @@ struct station_parameters { * @STATION_INFO_RX_BITRATE: @rxrate fields are filled * @STATION_INFO_BSS_PARAM: @bss_param filled * @STATION_INFO_CONNECTED_TIME: @connected_time filled + * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled */ enum station_info_flags { STATION_INFO_INACTIVE_TIME = 1<<0, @@ -444,7 +445,8 @@ enum station_info_flags { STATION_INFO_SIGNAL_AVG = 1<<13, STATION_INFO_RX_BITRATE = 1<<14, STATION_INFO_BSS_PARAM = 1<<15, - STATION_INFO_CONNECTED_TIME = 1<<16 + STATION_INFO_CONNECTED_TIME = 1<<16, + STATION_INFO_ASSOC_REQ_IES = 1<<17 }; /** @@ -536,6 +538,11 @@ struct sta_bss_parameters { * This number should increase every time the list of stations * changes, i.e. when a station is added or removed, so that * userspace can tell whether it got a consistent snapshot. + * @assoc_req_ies: IEs from (Re)Association Request. + * This is used only when in AP mode with drivers that do not use + * user space MLME/SME implementation. The information is provided for + * the cfg80211_new_sta() calls to notify user space of the IEs. + * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets. */ struct station_info { u32 filled; @@ -558,6 +565,14 @@ struct station_info { struct sta_bss_parameters bss_param; int generation; + + const u8 *assoc_req_ies; + size_t assoc_req_ies_len; + + /* + * Note: Add a new enum station_info_flags value for each new field and + * use it to check which fields are initialized. + */ }; /** @@ -798,6 +813,15 @@ struct cfg80211_scan_request { }; /** + * struct cfg80211_match_set - sets of attributes to match + * + * @ssid: SSID to be matched + */ +struct cfg80211_match_set { + struct cfg80211_ssid ssid; +}; + +/** * struct cfg80211_sched_scan_request - scheduled scan request description * * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans) @@ -806,6 +830,11 @@ struct cfg80211_scan_request { * @interval: interval between each scheduled scan cycle * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets + * @match_sets: sets of parameters to be matched for a scan result + * entry to be considered valid and to be passed to the host + * (others are filtered out). + * If ommited, all results are passed. + * @n_match_sets: number of match sets * @wiphy: the wiphy this was for * @dev: the interface * @channels: channels to scan @@ -817,6 +846,8 @@ struct cfg80211_sched_scan_request { u32 interval; const u8 *ie; size_t ie_len; + struct cfg80211_match_set *match_sets; + int n_match_sets; /* internal */ struct wiphy *wiphy; @@ -1146,14 +1177,32 @@ struct cfg80211_wowlan_trig_pkt_pattern { * @magic_pkt: wake up on receiving magic packet * @patterns: wake up on receiving packet matching a pattern * @n_patterns: number of patterns + * @gtk_rekey_failure: wake up on GTK rekey failure + * @eap_identity_req: wake up on EAP identity request packet + * @four_way_handshake: wake up on 4-way handshake + * @rfkill_release: wake up when rfkill is released */ struct cfg80211_wowlan { - bool any, disconnect, magic_pkt; + bool any, disconnect, magic_pkt, gtk_rekey_failure, + eap_identity_req, four_way_handshake, + rfkill_release; struct cfg80211_wowlan_trig_pkt_pattern *patterns; int n_patterns; }; /** + * struct cfg80211_gtk_rekey_data - rekey data + * @kek: key encryption key + * @kck: key confirmation key + * @replay_ctr: replay counter + */ +struct cfg80211_gtk_rekey_data { + u8 kek[NL80211_KEK_LEN]; + u8 kck[NL80211_KCK_LEN]; + u8 replay_ctr[NL80211_REPLAY_CTR_LEN]; +}; + +/** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks @@ -1197,6 +1246,8 @@ struct cfg80211_wowlan { * * @set_default_mgmt_key: set the default management frame key on an interface * + * @set_rekey_data: give the data necessary for GTK rekeying to the driver + * * @add_beacon: Add a beacon with given parameters, @head, @interval * and @dtim_period will be valid, @tail is optional. * @set_beacon: Change the beacon parameters for an access point mode @@ -1314,6 +1365,12 @@ struct cfg80211_wowlan { * @set_ringparam: Set tx and rx ring sizes. * * @get_ringparam: Get tx and rx ring current and maximum sizes. + * + * @tdls_mgmt: Transmit a TDLS management frame. + * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup). + * + * @probe_client: probe an associated client, must return a cookie that it + * later passes to cfg80211_probe_status(). */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -1490,6 +1547,18 @@ struct cfg80211_ops { struct net_device *dev, struct cfg80211_sched_scan_request *request); int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev); + + int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_gtk_rekey_data *data); + + int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, + u8 *peer, u8 action_code, u8 dialog_token, + u16 status_code, const u8 *buf, size_t len); + int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, + u8 *peer, enum nl80211_tdls_operation oper); + + int (*probe_client)(struct wiphy *wiphy, struct net_device *dev, + const u8 *peer, u64 *cookie); }; /* @@ -1539,6 +1608,19 @@ struct cfg80211_ops { * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing * auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH. * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans. + * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the + * firmware. + * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP. + * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation. + * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z) + * link setup/discovery operations internally. Setup, discovery and + * teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT + * command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be + * used for asking the driver/firmware to perform a TDLS operation. + * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME + * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes + * when there are virtual interfaces in AP mode by calling + * cfg80211_report_obss_beacon(). */ enum wiphy_flags { WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), @@ -1553,6 +1635,12 @@ enum wiphy_flags { WIPHY_FLAG_MESH_AUTH = BIT(10), WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11), WIPHY_FLAG_ENFORCE_COMBINATIONS = BIT(12), + WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), + WIPHY_FLAG_AP_UAPSD = BIT(14), + WIPHY_FLAG_SUPPORTS_TDLS = BIT(15), + WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16), + WIPHY_FLAG_HAVE_AP_SME = BIT(17), + WIPHY_FLAG_REPORTS_OBSS = BIT(18), }; /** @@ -1647,11 +1735,21 @@ struct ieee80211_txrx_stypes { * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet * (see nl80211.h) * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect + * @WIPHY_WOWLAN_SUPPORTS_GTK_REKEY: supports GTK rekeying while asleep + * @WIPHY_WOWLAN_GTK_REKEY_FAILURE: supports wakeup on GTK rekey failure + * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request + * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure + * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release */ enum wiphy_wowlan_support_flags { - WIPHY_WOWLAN_ANY = BIT(0), - WIPHY_WOWLAN_MAGIC_PKT = BIT(1), - WIPHY_WOWLAN_DISCONNECT = BIT(2), + WIPHY_WOWLAN_ANY = BIT(0), + WIPHY_WOWLAN_MAGIC_PKT = BIT(1), + WIPHY_WOWLAN_DISCONNECT = BIT(2), + WIPHY_WOWLAN_SUPPORTS_GTK_REKEY = BIT(3), + WIPHY_WOWLAN_GTK_REKEY_FAILURE = BIT(4), + WIPHY_WOWLAN_EAP_IDENTITY_REQ = BIT(5), + WIPHY_WOWLAN_4WAY_HANDSHAKE = BIT(6), + WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7), }; /** @@ -1716,9 +1814,16 @@ struct wiphy_wowlan_support { * this variable determines its size * @max_scan_ssids: maximum number of SSIDs the device can scan for in * any given scan + * @max_sched_scan_ssids: maximum number of SSIDs the device can scan + * for in any given scheduled scan + * @max_match_sets: maximum number of match sets the device can handle + * when performing a scheduled scan, 0 if filtering is not + * supported. * @max_scan_ie_len: maximum length of user-controlled IEs device can * add to probe request frames transmitted during a scan, must not * include fixed IEs like supported rates + * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled + * scans * @coverage_class: current coverage class * @fw_version: firmware version for ethtool reporting * @hw_version: hardware version for ethtool reporting @@ -1743,6 +1848,8 @@ struct wiphy_wowlan_support { * may request, if implemented. * * @wowlan: WoWLAN support information + * + * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features. */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -1766,11 +1873,16 @@ struct wiphy { u32 flags; + u32 ap_sme_capa; + enum cfg80211_signal_type signal_type; int bss_priv_size; u8 max_scan_ssids; + u8 max_sched_scan_ssids; + u8 max_match_sets; u16 max_scan_ie_len; + u16 max_sched_scan_ie_len; int n_cipher_suites; const u32 *cipher_suites; @@ -2013,6 +2125,8 @@ struct wireless_dev { int beacon_interval; + u32 ap_unexpected_nlpid; + #ifdef CONFIG_CFG80211_WEXT /* wext data */ struct { @@ -3022,6 +3136,68 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev, void cfg80211_cqm_pktloss_notify(struct net_device *dev, const u8 *peer, u32 num_packets, gfp_t gfp); +/** + * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying + * @dev: network device + * @bssid: BSSID of AP (to avoid races) + * @replay_ctr: new replay counter + */ +void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid, + const u8 *replay_ctr, gfp_t gfp); + +/** + * cfg80211_pmksa_candidate_notify - notify about PMKSA caching candidate + * @dev: network device + * @index: candidate index (the smaller the index, the higher the priority) + * @bssid: BSSID of AP + * @preauth: Whether AP advertises support for RSN pre-authentication + * @gfp: allocation flags + */ +void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, + const u8 *bssid, bool preauth, gfp_t gfp); + +/** + * cfg80211_rx_spurious_frame - inform userspace about a spurious frame + * @dev: The device the frame matched to + * @addr: the transmitter address + * @gfp: context flags + * + * This function is used in AP mode (only!) to inform userspace that + * a spurious class 3 frame was received, to be able to deauth the + * sender. + * Returns %true if the frame was passed to userspace (or this failed + * for a reason other than not having a subscription.) + */ +bool cfg80211_rx_spurious_frame(struct net_device *dev, + const u8 *addr, gfp_t gfp); + +/** + * cfg80211_probe_status - notify userspace about probe status + * @dev: the device the probe was sent on + * @addr: the address of the peer + * @cookie: the cookie filled in @probe_client previously + * @acked: indicates whether probe was acked or not + * @gfp: allocation flags + */ +void cfg80211_probe_status(struct net_device *dev, const u8 *addr, + u64 cookie, bool acked, gfp_t gfp); + +/** + * cfg80211_report_obss_beacon - report beacon from other APs + * @wiphy: The wiphy that received the beacon + * @frame: the frame + * @len: length of the frame + * @freq: frequency the frame was received on + * @gfp: allocation flags + * + * Use this function to report to userspace when a beacon was + * received. It is not useful to call this when there is no + * netdev that is in AP/GO mode. + */ +void cfg80211_report_obss_beacon(struct wiphy *wiphy, + const u8 *frame, size_t len, + int freq, gfp_t gfp); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ |