diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 224 |
1 files changed, 162 insertions, 62 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index f7eba1300d82..04c2d4670dc6 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -93,9 +93,11 @@ struct device; * enum ieee80211_max_queues - maximum number of queues * * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues. + * @IEEE80211_MAX_QUEUE_MAP: bitmap with maximum queues set */ enum ieee80211_max_queues { IEEE80211_MAX_QUEUES = 16, + IEEE80211_MAX_QUEUE_MAP = BIT(IEEE80211_MAX_QUEUES) - 1, }; #define IEEE80211_INVAL_HW_QUEUE 0xff @@ -126,6 +128,7 @@ enum ieee80211_ac_numbers { * 2^n-1 in the range 1..32767] * @cw_max: maximum contention window [like @cw_min] * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled + * @acm: is mandatory admission control required for the access category * @uapsd: is U-APSD mode enabled for the queue */ struct ieee80211_tx_queue_params { @@ -133,6 +136,7 @@ struct ieee80211_tx_queue_params { u16 cw_min; u16 cw_max; u8 aifs; + bool acm; bool uapsd; }; @@ -207,7 +211,7 @@ struct ieee80211_chanctx_conf { * @BSS_CHANGED_QOS: QoS for this association was enabled/disabled. Note * that it is only ever disabled for station mode. * @BSS_CHANGED_IDLE: Idle changed for this BSS/interface. - * @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode) + * @BSS_CHANGED_SSID: SSID changed for this BSS (AP and IBSS mode) * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode) * @BSS_CHANGED_PS: PS changed for this BSS (STA mode) * @BSS_CHANGED_TXPOWER: TX power setting changed for this interface @@ -324,12 +328,11 @@ enum ieee80211_rssi_event { * your driver/device needs to do. * @ps: power-save mode (STA only). This flag is NOT affected by * offchannel/dynamic_ps operations. - * @ssid: The SSID of the current vif. Only valid in AP-mode. + * @ssid: The SSID of the current vif. Valid in AP and IBSS mode. * @ssid_len: Length of SSID given in @ssid. * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode. * @txpower: TX power in dBm - * @p2p_ctwindow: P2P CTWindow, only for P2P client interfaces - * @p2p_oppps: P2P opportunistic PS is enabled + * @p2p_noa_attr: P2P NoA attribute for P2P powersave */ struct ieee80211_bss_conf { const u8 *bssid; @@ -363,8 +366,7 @@ struct ieee80211_bss_conf { size_t ssid_len; bool hidden_ssid; int txpower; - u8 p2p_ctwindow; - bool p2p_oppps; + struct ieee80211_p2p_noa_attr p2p_noa_attr; }; /** @@ -561,6 +563,9 @@ enum mac80211_rate_control_flags { /* maximum number of rate stages */ #define IEEE80211_TX_MAX_RATES 4 +/* maximum number of rate table entries */ +#define IEEE80211_TX_RATE_TABLE_SIZE 4 + /** * struct ieee80211_tx_rate - rate selection/status * @@ -601,8 +606,8 @@ static inline void ieee80211_rate_set_vht(struct ieee80211_tx_rate *rate, u8 mcs, u8 nss) { WARN_ON(mcs & ~0xF); - WARN_ON(nss & ~0x7); - rate->idx = (nss << 4) | mcs; + WARN_ON((nss - 1) & ~0x7); + rate->idx = ((nss - 1) << 4) | mcs; } static inline u8 @@ -614,7 +619,7 @@ ieee80211_rate_get_vht_mcs(const struct ieee80211_tx_rate *rate) static inline u8 ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate) { - return rate->idx >> 4; + return (rate->idx >> 4) + 1; } /** @@ -655,7 +660,11 @@ struct ieee80211_tx_info { struct ieee80211_tx_rate rates[ IEEE80211_TX_MAX_RATES]; s8 rts_cts_rate_idx; - /* 3 bytes free */ + u8 use_rts:1; + u8 use_cts_prot:1; + u8 short_preamble:1; + u8 skip_table:1; + /* 2 bytes free */ }; /* only needed before rate control */ unsigned long jiffies; @@ -676,6 +685,8 @@ struct ieee80211_tx_info { struct { struct ieee80211_tx_rate driver_rates[ IEEE80211_TX_MAX_RATES]; + u8 pad[4]; + void *rate_driver_data[ IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)]; }; @@ -974,8 +985,7 @@ enum ieee80211_smps_mode { * @power_level: requested transmit power (in dBm), backward compatibility * value only that is set to the minimum of all interfaces * - * @channel: the channel to tune to - * @channel_type: the channel (HT) type + * @chandef: the channel definition to tune to * @radar_enabled: whether radar detection is enabled * * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame @@ -1001,8 +1011,7 @@ struct ieee80211_conf { u8 long_frame_max_tx_count, short_frame_max_tx_count; - struct ieee80211_channel *channel; - enum nl80211_channel_type channel_type; + struct cfg80211_chan_def chandef; bool radar_enabled; enum ieee80211_smps_mode smps_mode; }; @@ -1019,13 +1028,13 @@ struct ieee80211_conf { * the driver passed into mac80211. * @block_tx: Indicates whether transmission must be blocked before the * scheduled channel switch, as indicated by the AP. - * @channel: the new channel to switch to + * @chandef: the new channel to switch to * @count: the number of TBTT's until the channel switch event */ struct ieee80211_channel_switch { u64 timestamp; bool block_tx; - struct ieee80211_channel *channel; + struct cfg80211_chan_def chandef; u8 count; }; @@ -1067,6 +1076,9 @@ enum ieee80211_vif_flags { * path needing to access it; even though the netdev carrier will always * be off when it is %NULL there can still be races and packets could be * processed after it switches back to %NULL. + * @debugfs_dir: debugfs dentry, can be used by drivers to create own per + * interface debug files. Note that it will be NULL for the virtual + * monitor interface (if that is requested.) * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *). */ @@ -1083,6 +1095,10 @@ struct ieee80211_vif { u32 driver_flags; +#ifdef CONFIG_MAC80211_DEBUGFS + struct dentry *debugfs_dir; +#endif + /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); }; @@ -1101,8 +1117,6 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) * These flags are used for communication about keys between the driver * and mac80211, with the @flags parameter of &struct ieee80211_key_conf. * - * @IEEE80211_KEY_FLAG_WMM_STA: Set by mac80211, this flag indicates - * that the STA this key will be used with could be using QoS. * @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the * driver to indicate that it requires IV generation for this * particular key. @@ -1127,7 +1141,6 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) * %IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW. */ enum ieee80211_key_flags { - IEEE80211_KEY_FLAG_WMM_STA = 1<<0, IEEE80211_KEY_FLAG_GENERATE_IV = 1<<1, IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2, IEEE80211_KEY_FLAG_PAIRWISE = 1<<3, @@ -1219,6 +1232,24 @@ enum ieee80211_sta_rx_bandwidth { }; /** + * struct ieee80211_sta_rates - station rate selection table + * + * @rcu_head: RCU head used for freeing the table on update + * @rates: transmit rates/flags to be used by default. + * Overriding entries per-packet is possible by using cb tx control. + */ +struct ieee80211_sta_rates { + struct rcu_head rcu_head; + struct { + s8 idx; + u8 count; + u8 count_cts; + u8 count_rts; + u16 flags; + } rate[IEEE80211_TX_RATE_TABLE_SIZE]; +}; + +/** * struct ieee80211_sta - station table entry * * A station table entry represents a station we are possibly @@ -1231,9 +1262,8 @@ enum ieee80211_sta_rx_bandwidth { * @addr: MAC address * @aid: AID we assigned to the station if we're an AP * @supp_rates: Bitmap of supported rates (per band) - * @ht_cap: HT capabilities of this STA; restricted to our own TX capabilities - * @vht_cap: VHT capabilities of this STA; Not restricting any capabilities - * of remote STA. Taking as is. + * @ht_cap: HT capabilities of this STA; restricted to our own capabilities + * @vht_cap: VHT capabilities of this STA; restricted to our own capabilities * @wme: indicates whether the STA supports WME. Only valid during AP-mode. * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *), size is determined in hw information. @@ -1246,6 +1276,7 @@ enum ieee80211_sta_rx_bandwidth { * notifications and capabilities. The value is only valid after * the station moves to associated state. * @smps_mode: current SMPS mode (off, static or dynamic) + * @tx_rates: rate control selection table */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1259,6 +1290,7 @@ struct ieee80211_sta { u8 rx_nss; enum ieee80211_sta_rx_bandwidth bandwidth; enum ieee80211_smps_mode smps_mode; + struct ieee80211_sta_rates __rcu *rates; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); @@ -1414,6 +1446,9 @@ struct ieee80211_tx_control { * for different virtual interfaces. See the doc section on HW queue * control for more details. * + * @IEEE80211_HW_SUPPORTS_RC_TABLE: The driver supports using a rate + * selection table provided by the rate control algorithm. + * * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any * P2P Interface. This will be honoured even if more than one interface * is supported. @@ -1446,6 +1481,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21, IEEE80211_HW_AP_LINK_PS = 1<<22, IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, + IEEE80211_HW_SUPPORTS_RC_TABLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, }; @@ -1531,6 +1567,17 @@ enum ieee80211_hw_flags { * @netdev_features: netdev features to be set in each netdev created * from this HW. Note only HW checksum features are currently * compatible with mac80211. Other feature bits will be rejected. + * + * @uapsd_queues: This bitmap is included in (re)association frame to indicate + * for each access category if it is uAPSD trigger-enabled and delivery- + * enabled. Use IEEE80211_WMM_IE_STA_QOSINFO_AC_* to set this bitmap. + * Each bit corresponds to different AC. Value '1' in specific bit means + * that corresponding AC is both trigger- and delivery-enabled. '0' means + * neither enabled. + * + * @uapsd_max_sp_len: maximum number of total buffered frames the WMM AP may + * deliver to a WMM STA during any Service Period triggered by the WMM STA. + * Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct values. */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -1556,6 +1603,8 @@ struct ieee80211_hw { u8 radiotap_mcs_details; u16 radiotap_vht_details; netdev_features_t netdev_features; + u8 uapsd_queues; + u8 uapsd_max_sp_len; }; /** @@ -1950,14 +1999,14 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * filter those response frames except in the case of frames that * are buffered in the driver -- those must remain buffered to avoid * reordering. Because it is possible that no frames are released - * in this case, the driver must call ieee80211_sta_eosp_irqsafe() + * in this case, the driver must call ieee80211_sta_eosp() * to indicate to mac80211 that the service period ended anyway. * * Finally, if frames from multiple TIDs are released from mac80211 * but the driver might reorder them, it must clear & set the flags * appropriately (only the last frame may have %IEEE80211_TX_STATUS_EOSP) * and also take care of the EOSP and MORE_DATA bits in the frame. - * The driver may also use ieee80211_sta_eosp_irqsafe() in this case. + * The driver may also use ieee80211_sta_eosp() in this case. */ /** @@ -2135,6 +2184,24 @@ enum ieee80211_rate_control_changed { }; /** + * enum ieee80211_roc_type - remain on channel type + * + * With the support for multi channel contexts and multi channel operations, + * remain on channel operations might be limited/deferred/aborted by other + * flows/operations which have higher priority (and vise versa). + * Specifying the ROC type can be used by devices to prioritize the ROC + * operations compared to other operations/flows. + * + * @IEEE80211_ROC_TYPE_NORMAL: There are no special requirements for this ROC. + * @IEEE80211_ROC_TYPE_MGMT_TX: The remain on channel request is required + * for sending managment frames offchannel. + */ +enum ieee80211_roc_type { + IEEE80211_ROC_TYPE_NORMAL = 0, + IEEE80211_ROC_TYPE_MGMT_TX, +}; + +/** * struct ieee80211_ops - callbacks from mac80211 to the driver * * This structure contains various callbacks that the driver may @@ -2212,18 +2279,6 @@ enum ieee80211_rate_control_changed { * MAC address of the device going away. * Hence, this callback must be implemented. It can sleep. * - * @add_interface_debugfs: Drivers can use this callback to add debugfs files - * when a vif is added to mac80211. This callback and - * @remove_interface_debugfs should be within a CONFIG_MAC80211_DEBUGFS - * conditional. @remove_interface_debugfs must be provided for cleanup. - * This callback can sleep. - * - * @remove_interface_debugfs: Remove the debugfs files which were added using - * @add_interface_debugfs. This callback must remove all debugfs entries - * that were added because mac80211 only removes interface debugfs when the - * interface is destroyed, not when it is removed from the driver. - * This callback can sleep. - * * @config: Handler for configuration requests. IEEE 802.11 code calls this * function to change hardware configuration, e.g., channel. * This function should never fail but returns a negative error code @@ -2245,6 +2300,9 @@ enum ieee80211_rate_control_changed { * See the section "Frame filtering" for more information. * This callback must be implemented and can sleep. * + * @set_multicast_list: Configure the device's interface specific RX multicast + * filter. This callback is optional. This callback must be atomic. + * * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit * must be set or cleared for a given STA. Must be atomic. * @@ -2426,8 +2484,11 @@ enum ieee80211_rate_control_changed { * @testmode_dump: Implement a cfg80211 test mode dump. The callback can sleep. * * @flush: Flush all pending frames from the hardware queue, making sure - * that the hardware queues are empty. If the parameter @drop is set - * to %true, pending frames may be dropped. The callback can sleep. + * that the hardware queues are empty. The @queues parameter is a bitmap + * of queues to flush, which is useful if different virtual interfaces + * use different hardware queues; it may also indicate all queues. + * If the parameter @drop is set to %true, pending frames may be dropped. + * The callback can sleep. * * @channel_switch: Drivers that need (or want) to offload the channel * switch operation for CSAs received from the AP may implement this @@ -2492,7 +2553,7 @@ enum ieee80211_rate_control_changed { * setting the EOSP flag in the QoS header of the frames. Also, when the * service period ends, the driver must set %IEEE80211_TX_STATUS_EOSP * on the last frame in the SP. Alternatively, it may call the function - * ieee80211_sta_eosp_irqsafe() to inform mac80211 of the end of the SP. + * ieee80211_sta_eosp() to inform mac80211 of the end of the SP. * This callback must be atomic. * @allow_buffered_frames: Prepare device to allow the given number of frames * to go out to the given station. The frames will be sent by mac80211 @@ -2503,7 +2564,7 @@ enum ieee80211_rate_control_changed { * them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag * on the last frame and clear it on all others and also handle the EOSP * bit in the QoS header correctly. Alternatively, it can also call the - * ieee80211_sta_eosp_irqsafe() function. + * ieee80211_sta_eosp() function. * The @tids parameter is a bitmap and tells the driver which TIDs the * frames will be on; it will at most have two bits set. * This callback must be atomic. @@ -2591,6 +2652,10 @@ struct ieee80211_ops { unsigned int changed_flags, unsigned int *total_flags, u64 multicast); + void (*set_multicast_list)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, bool allmulti, + struct netdev_hw_addr_list *mc_list); + int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta, bool set); int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd, @@ -2637,12 +2702,6 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct dentry *dir); - void (*add_interface_debugfs)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct dentry *dir); - void (*remove_interface_debugfs)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct dentry *dir); #endif void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); @@ -2677,7 +2736,7 @@ struct ieee80211_ops { struct netlink_callback *cb, void *data, int len); #endif - void (*flush)(struct ieee80211_hw *hw, bool drop); + void (*flush)(struct ieee80211_hw *hw, u32 queues, bool drop); void (*channel_switch)(struct ieee80211_hw *hw, struct ieee80211_channel_switch *ch_switch); int (*napi_poll)(struct ieee80211_hw *hw, int budget); @@ -2687,7 +2746,8 @@ struct ieee80211_ops { int (*remain_on_channel)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_channel *chan, - int duration); + int duration, + enum ieee80211_roc_type type); int (*cancel_remain_on_channel)(struct ieee80211_hw *hw); int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx); void (*get_ringparam)(struct ieee80211_hw *hw, @@ -3108,6 +3168,25 @@ void ieee80211_sta_set_buffered(struct ieee80211_sta *sta, u8 tid, bool buffered); /** + * ieee80211_get_tx_rates - get the selected transmit rates for a packet + * + * Call this function in a driver with per-packet rate selection support + * to combine the rate info in the packet tx info with the most recent + * rate selection table for the station entry. + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @sta: the receiver station to which this packet is sent. + * @skb: the frame to be transmitted. + * @dest: buffer for extracted rate/retry information + * @max_rates: maximum number of rates to fetch + */ +void ieee80211_get_tx_rates(struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct sk_buff *skb, + struct ieee80211_tx_rate *dest, + int max_rates); + +/** * ieee80211_tx_status - transmit status callback * * Call this function for all transmitted frames after they have been @@ -3842,14 +3921,17 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw, * %IEEE80211_TX_STATUS_EOSP bit and call this function instead. * This applies for PS-Poll as well as uAPSD. * - * Note that there is no non-_irqsafe version right now as - * it wasn't needed, but just like _tx_status() and _rx() - * must not be mixed in irqsafe/non-irqsafe versions, this - * function must not be mixed with those either. Use the - * all irqsafe, or all non-irqsafe, don't mix! If you need - * the non-irqsafe version of this, you need to add it. + * Note that just like with _tx_status() and _rx() drivers must + * not mix calls to irqsafe/non-irqsafe versions, this function + * must not be mixed with those either. Use the all irqsafe, or + * all non-irqsafe, don't mix! + * + * NB: the _irqsafe version of this function doesn't exist, no + * driver needs it right now. Don't call this function if + * you'd need the _irqsafe version, look at the git history + * and restore the _irqsafe version! */ -void ieee80211_sta_eosp_irqsafe(struct ieee80211_sta *pubsta); +void ieee80211_sta_eosp(struct ieee80211_sta *pubsta); /** * ieee80211_iter_keys - iterate keys programmed into the device @@ -4079,7 +4161,7 @@ void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn); * (deprecated; this will be removed once drivers get updated to use * rate_idx_mask) * @rate_idx_mask: user-requested (legacy) rate mask - * @rate_idx_mcs_mask: user-requested MCS rate mask + * @rate_idx_mcs_mask: user-requested MCS rate mask (NULL if not in use) * @bss: whether this frame is sent out in AP or IBSS mode */ struct ieee80211_tx_rate_control { @@ -4091,7 +4173,7 @@ struct ieee80211_tx_rate_control { bool rts, short_preamble; u8 max_rate_idx; u32 rate_idx_mask; - u8 rate_idx_mcs_mask[IEEE80211_HT_MCS_MASK_LEN]; + u8 *rate_idx_mcs_mask; bool bss; }; @@ -4180,37 +4262,55 @@ bool rate_usable_index_exists(struct ieee80211_supported_band *sband, return false; } +/** + * rate_control_set_rates - pass the sta rate selection to mac80211/driver + * + * When not doing a rate control probe to test rates, rate control should pass + * its rate selection to mac80211. If the driver supports receiving a station + * rate table, it will use it to ensure that frames are always sent based on + * the most recent rate control module decision. + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @pubsta: &struct ieee80211_sta pointer to the target destination. + * @rates: new tx rate set to be used for this station. + */ +int rate_control_set_rates(struct ieee80211_hw *hw, + struct ieee80211_sta *pubsta, + struct ieee80211_sta_rates *rates); + int ieee80211_rate_control_register(struct rate_control_ops *ops); void ieee80211_rate_control_unregister(struct rate_control_ops *ops); static inline bool conf_is_ht20(struct ieee80211_conf *conf) { - return conf->channel_type == NL80211_CHAN_HT20; + return conf->chandef.width == NL80211_CHAN_WIDTH_20; } static inline bool conf_is_ht40_minus(struct ieee80211_conf *conf) { - return conf->channel_type == NL80211_CHAN_HT40MINUS; + return conf->chandef.width == NL80211_CHAN_WIDTH_40 && + conf->chandef.center_freq1 < conf->chandef.chan->center_freq; } static inline bool conf_is_ht40_plus(struct ieee80211_conf *conf) { - return conf->channel_type == NL80211_CHAN_HT40PLUS; + return conf->chandef.width == NL80211_CHAN_WIDTH_40 && + conf->chandef.center_freq1 > conf->chandef.chan->center_freq; } static inline bool conf_is_ht40(struct ieee80211_conf *conf) { - return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf); + return conf->chandef.width == NL80211_CHAN_WIDTH_40; } static inline bool conf_is_ht(struct ieee80211_conf *conf) { - return conf->channel_type != NL80211_CHAN_NO_HT; + return conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT; } static inline enum nl80211_iftype |