diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 248 |
1 files changed, 223 insertions, 25 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8248e3909fdf..dae2e24616e1 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -189,6 +189,43 @@ struct ieee80211_chanctx_conf { }; /** + * enum ieee80211_chanctx_switch_mode - channel context switch mode + * @CHANCTX_SWMODE_REASSIGN_VIF: Both old and new contexts already + * exist (and will continue to exist), but the virtual interface + * needs to be switched from one to the other. + * @CHANCTX_SWMODE_SWAP_CONTEXTS: The old context exists but will stop + * to exist with this call, the new context doesn't exist but + * will be active after this call, the virtual interface switches + * from the old to the new (note that the driver may of course + * implement this as an on-the-fly chandef switch of the existing + * hardware context, but the mac80211 pointer for the old context + * will cease to exist and only the new one will later be used + * for changes/removal.) + */ +enum ieee80211_chanctx_switch_mode { + CHANCTX_SWMODE_REASSIGN_VIF, + CHANCTX_SWMODE_SWAP_CONTEXTS, +}; + +/** + * struct ieee80211_vif_chanctx_switch - vif chanctx switch information + * + * This is structure is used to pass information about a vif that + * needs to switch from one chanctx to another. The + * &ieee80211_chanctx_switch_mode defines how the switch should be + * done. + * + * @vif: the vif that should be switched from old_ctx to new_ctx + * @old_ctx: the old context to which the vif was assigned + * @new_ctx: the new context to which the vif must be assigned + */ +struct ieee80211_vif_chanctx_switch { + struct ieee80211_vif *vif; + struct ieee80211_chanctx_conf *old_ctx; + struct ieee80211_chanctx_conf *new_ctx; +}; + +/** * enum ieee80211_bss_change - BSS change notification flags * * These flags are used with the bss_info_changed() callback @@ -717,20 +754,25 @@ struct ieee80211_tx_info { }; /** - * struct ieee80211_sched_scan_ies - scheduled scan IEs + * struct ieee80211_scan_ies - descriptors for different blocks of IEs * - * This structure is used to pass the appropriate IEs to be used in scheduled - * scans for all bands. It contains both the IEs passed from the userspace + * This structure is used to point to different blocks of IEs in HW scan + * and scheduled scan. These blocks contain the IEs passed by userspace * and the ones generated by mac80211. * - * @ie: array with the IEs for each supported band - * @len: array with the total length of the IEs for each band + * @ies: pointers to band specific IEs. + * @len: lengths of band_specific IEs. + * @common_ies: IEs for all bands (especially vendor specific ones) + * @common_ie_len: length of the common_ies */ -struct ieee80211_sched_scan_ies { - u8 *ie[IEEE80211_NUM_BANDS]; +struct ieee80211_scan_ies { + const u8 *ies[IEEE80211_NUM_BANDS]; size_t len[IEEE80211_NUM_BANDS]; + const u8 *common_ies; + size_t common_ie_len; }; + static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) { return (struct ieee80211_tx_info *)skb->cb; @@ -1113,7 +1155,9 @@ enum ieee80211_vif_flags { * @addr: address of this interface * @p2p: indicates whether this AP or STA interface is a p2p * interface, i.e. a GO or p2p-sta respectively - * @csa_active: marks whether a channel switch is going on + * @csa_active: marks whether a channel switch is going on. Internally it is + * write-protected by sdata_lock and local->mtx so holding either is fine + * for read access. * @driver_flags: flags/capabilities the driver has for this interface, * these need to be set (or cleared) when the interface is added * or, if supported by the driver, the interface type is changed @@ -1202,14 +1246,18 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev); * fall back to software crypto. Note that this flag deals only with * RX, if your crypto engine can't deal with TX you can also set the * %IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW. + * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the + * driver for a CCMP key to indicate that is requires IV generation + * only for managment frames (MFP). */ enum ieee80211_key_flags { - IEEE80211_KEY_FLAG_GENERATE_IV = 1<<1, - IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2, - IEEE80211_KEY_FLAG_PAIRWISE = 1<<3, - IEEE80211_KEY_FLAG_SW_MGMT_TX = 1<<4, - IEEE80211_KEY_FLAG_PUT_IV_SPACE = 1<<5, - IEEE80211_KEY_FLAG_RX_MGMT = 1<<6, + IEEE80211_KEY_FLAG_GENERATE_IV_MGMT = BIT(0), + IEEE80211_KEY_FLAG_GENERATE_IV = BIT(1), + IEEE80211_KEY_FLAG_GENERATE_MMIC = BIT(2), + IEEE80211_KEY_FLAG_PAIRWISE = BIT(3), + IEEE80211_KEY_FLAG_SW_MGMT_TX = BIT(4), + IEEE80211_KEY_FLAG_PUT_IV_SPACE = BIT(5), + IEEE80211_KEY_FLAG_RX_MGMT = BIT(6), }; /** @@ -1370,6 +1418,7 @@ struct ieee80211_sta_rates { * the station moves to associated state. * @smps_mode: current SMPS mode (off, static or dynamic) * @rates: rate control selection table + * @tdls: indicates whether the STA is a TDLS peer */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1384,6 +1433,7 @@ struct ieee80211_sta { enum ieee80211_sta_rx_bandwidth bandwidth; enum ieee80211_smps_mode smps_mode; struct ieee80211_sta_rates __rcu *rates; + bool tdls; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); @@ -1555,6 +1605,9 @@ struct ieee80211_tx_control { * for a single active channel while using channel contexts. When support * is not enabled the default action is to disconnect when getting the * CSA frame. + * + * @IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS: The HW supports scanning on all bands + * in one command, mac80211 doesn't have to run separate scans per band. */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1586,6 +1639,8 @@ enum ieee80211_hw_flags { IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, IEEE80211_HW_SUPPORTS_HT_CCK_RATES = 1<<27, IEEE80211_HW_CHANCTX_STA_CSA = 1<<28, + /* bit 29 unused */ + IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS = 1<<30, }; /** @@ -1712,6 +1767,19 @@ struct ieee80211_hw { }; /** + * struct ieee80211_scan_request - hw scan request + * + * @ies: pointers different parts of IEs (in req.ie) + * @req: cfg80211 request. + */ +struct ieee80211_scan_request { + struct ieee80211_scan_ies ies; + + /* Keep last */ + struct cfg80211_scan_request req; +}; + +/** * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy * * @wiphy: the &struct wiphy which we want to query @@ -2609,6 +2677,7 @@ enum ieee80211_roc_type { * of queues to flush, which is useful if different virtual interfaces * use different hardware queues; it may also indicate all queues. * If the parameter @drop is set to %true, pending frames may be dropped. + * Note that vif can be NULL. * The callback can sleep. * * @channel_switch: Drivers that need (or want) to offload the channel @@ -2711,6 +2780,15 @@ enum ieee80211_roc_type { * mac80211 will transmit the frame right away. * The callback is optional and can (should!) sleep. * + * @mgd_protect_tdls_discover: Protect a TDLS discovery session. After sending + * a TDLS discovery-request, we expect a reply to arrive on the AP's + * channel. We must stay on the channel (no PSM, scan, etc.), since a TDLS + * setup-response is a direct packet not buffered by the AP. + * mac80211 will call this function just before the transmission of a TDLS + * discovery-request. The recommended period of protection is at least + * 2 * (DTIM period). + * The callback is optional and can sleep. + * * @add_chanctx: Notifies device driver about new channel context creation. * @remove_chanctx: Notifies device driver about channel context destruction. * @change_chanctx: Notifies device driver about channel context changes that @@ -2720,6 +2798,11 @@ enum ieee80211_roc_type { * to vif. Possible use is for hw queue remapping. * @unassign_vif_chanctx: Notifies device driver about channel context being * unbound from vif. + * @switch_vif_chanctx: switch a number of vifs from one chanctx to + * another, as specified in the list of + * @ieee80211_vif_chanctx_switch passed to the driver, according + * to the mode defined in &ieee80211_chanctx_switch_mode. + * * @start_ap: Start operation on the AP interface, this is called after all the * information in bss_conf is set and beacon can be retrieved. A channel * context is bound before this is called. Note that if the driver uses @@ -2753,6 +2836,10 @@ enum ieee80211_roc_type { * information in bss_conf is set up and the beacon can be retrieved. A * channel context is bound before this is called. * @leave_ibss: Leave the IBSS again. + * + * @get_expected_throughput: extract the expected throughput towards the + * specified station. The returned value is expressed in Kbps. It returns 0 + * if the RC algorithm does not have proper data to provide. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -2803,13 +2890,13 @@ struct ieee80211_ops { void (*set_default_unicast_key)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int idx); int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct cfg80211_scan_request *req); + struct ieee80211_scan_request *req); void (*cancel_hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); int (*sched_scan_start)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_sched_scan_request *req, - struct ieee80211_sched_scan_ies *ies); + struct ieee80211_scan_ies *ies); int (*sched_scan_stop)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*sw_scan_start)(struct ieee80211_hw *hw); @@ -2871,7 +2958,8 @@ struct ieee80211_ops { struct netlink_callback *cb, void *data, int len); #endif - void (*flush)(struct ieee80211_hw *hw, u32 queues, bool drop); + void (*flush)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + u32 queues, bool drop); void (*channel_switch)(struct ieee80211_hw *hw, struct ieee80211_channel_switch *ch_switch); int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant); @@ -2918,6 +3006,9 @@ struct ieee80211_ops { void (*mgd_prepare_tx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + void (*mgd_protect_tdls_discover)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + int (*add_chanctx)(struct ieee80211_hw *hw, struct ieee80211_chanctx_conf *ctx); void (*remove_chanctx)(struct ieee80211_hw *hw, @@ -2931,6 +3022,10 @@ struct ieee80211_ops { void (*unassign_vif_chanctx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_chanctx_conf *ctx); + int (*switch_vif_chanctx)(struct ieee80211_hw *hw, + struct ieee80211_vif_chanctx_switch *vifs, + int n_vifs, + enum ieee80211_chanctx_switch_mode mode); void (*restart_complete)(struct ieee80211_hw *hw); @@ -2945,6 +3040,7 @@ struct ieee80211_ops { int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + u32 (*get_expected_throughput)(struct ieee80211_sta *sta); }; /** @@ -3394,6 +3490,47 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, */ void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets); +#define IEEE80211_MAX_CSA_COUNTERS_NUM 2 + +/** + * struct ieee80211_mutable_offsets - mutable beacon offsets + * @tim_offset: position of TIM element + * @tim_length: size of TIM element + * @csa_counter_offs: array of IEEE80211_MAX_CSA_COUNTERS_NUM offsets + * to CSA counters. This array can contain zero values which + * should be ignored. + */ +struct ieee80211_mutable_offsets { + u16 tim_offset; + u16 tim_length; + + u16 csa_counter_offs[IEEE80211_MAX_CSA_COUNTERS_NUM]; +}; + +/** + * ieee80211_beacon_get_template - beacon template generation function + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @offs: &struct ieee80211_mutable_offsets pointer to struct that will + * receive the offsets that may be updated by the driver. + * + * If the driver implements beaconing modes, it must use this function to + * obtain the beacon template. + * + * This function should be used if the beacon frames are generated by the + * device, and then the driver must use the returned beacon as the template + * The driver or the device are responsible to update the DTIM and, when + * applicable, the CSA count. + * + * The driver is responsible for freeing the returned skb. + * + * Return: The beacon template. %NULL on error. + */ +struct sk_buff * +ieee80211_beacon_get_template(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_mutable_offsets *offs); + /** * ieee80211_beacon_get_tim - beacon generation function * @hw: pointer obtained from ieee80211_alloc_hw(). @@ -3405,16 +3542,12 @@ void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets); * Set to 0 if invalid (in non-AP modes). * * If the driver implements beaconing modes, it must use this function to - * obtain the beacon frame/template. + * obtain the beacon frame. * * If the beacon frames are generated by the host system (i.e., not in * hardware/firmware), the driver uses this function to get each beacon - * frame from mac80211 -- it is responsible for calling this function - * before the beacon is needed (e.g. based on hardware interrupt). - * - * If the beacon frames are generated by the device, then the driver - * must use the returned beacon as the template and change the TIM IE - * according to the current DTIM parameters/TIM bitmap. + * frame from mac80211 -- it is responsible for calling this function exactly + * once before the beacon is needed (e.g. based on hardware interrupt). * * The driver is responsible for freeing the returned skb. * @@ -3440,6 +3573,20 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, } /** + * ieee80211_csa_update_counter - request mac80211 to decrement the csa counter + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * The csa counter should be updated after each beacon transmission. + * This function is called implicitly when + * ieee80211_beacon_get/ieee80211_beacon_get_tim are called, however if the + * beacon frames are generated by the device, the driver should call this + * function after each beacon transmission to sync mac80211's csa counters. + * + * Return: new csa counter value + */ +u8 ieee80211_csa_update_counter(struct ieee80211_vif *vif); + +/** * ieee80211_csa_finish - notify mac80211 about channel switch * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @@ -4405,6 +4552,40 @@ void ieee80211_stop_rx_ba_session(struct ieee80211_vif *vif, u16 ba_rx_bitmap, */ void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn); +/** + * ieee80211_start_rx_ba_session_offl - start a Rx BA session + * + * Some device drivers may offload part of the Rx aggregation flow including + * AddBa/DelBa negotiation but may otherwise be incapable of full Rx + * reordering. + * + * Create structures responsible for reordering so device drivers may call here + * when they complete AddBa negotiation. + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback + * @addr: station mac address + * @tid: the rx tid + */ +void ieee80211_start_rx_ba_session_offl(struct ieee80211_vif *vif, + const u8 *addr, u16 tid); + +/** + * ieee80211_stop_rx_ba_session_offl - stop a Rx BA session + * + * Some device drivers may offload part of the Rx aggregation flow including + * AddBa/DelBa negotiation but may otherwise be incapable of full Rx + * reordering. + * + * Destroy structures responsible for reordering so device drivers may call here + * when they complete DelBa negotiation. + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback + * @addr: station mac address + * @tid: the rx tid + */ +void ieee80211_stop_rx_ba_session_offl(struct ieee80211_vif *vif, + const u8 *addr, u16 tid); + /* Rate control API */ /** @@ -4467,6 +4648,8 @@ struct rate_control_ops { void (*add_sta_debugfs)(void *priv, void *priv_sta, struct dentry *dir); void (*remove_sta_debugfs)(void *priv, void *priv_sta); + + u32 (*get_expected_throughput)(void *priv_sta); }; static inline int rate_supported(struct ieee80211_sta *sta, @@ -4576,7 +4759,9 @@ conf_is_ht40(struct ieee80211_conf *conf) static inline bool conf_is_ht(struct ieee80211_conf *conf) { - return conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT; + return (conf->chandef.width != NL80211_CHAN_WIDTH_5) && + (conf->chandef.width != NL80211_CHAN_WIDTH_10) && + (conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT); } static inline enum nl80211_iftype @@ -4692,4 +4877,17 @@ int ieee80211_parse_p2p_noa(const struct ieee80211_p2p_noa_attr *attr, */ void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf); +/** + * ieee80211_tdls_oper - request userspace to perform a TDLS operation + * @vif: virtual interface + * @peer: the peer's destination address + * @oper: the requested TDLS operation + * @reason_code: reason code for the operation, valid for TDLS teardown + * @gfp: allocation flags + * + * See cfg80211_tdls_oper_request(). + */ +void ieee80211_tdls_oper_request(struct ieee80211_vif *vif, const u8 *peer, + enum nl80211_tdls_operation oper, + u16 reason_code, gfp_t gfp); #endif /* MAC80211_H */ |