6 files changed, 41 insertions, 6 deletions
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 24e9033f8b3f..be88166349a1 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -240,6 +240,7 @@ header-y += matroxfb.h
 header-y += mdio.h
 header-y += media.h
 header-y += mei.h
+header-y += memfd.h
 header-y += mempolicy.h
 header-y += meye.h
 header-y += mic_common.h
@@ -395,6 +396,7 @@ header-y += un.h
 header-y += unistd.h
 header-y += unix_diag.h
 header-y += usbdevice_fs.h
+header-y += usbip.h
 header-y += utime.h
 header-y += utsname.h
 header-y += uuid.h
diff --git a/include/uapi/linux/bsg.h b/include/uapi/linux/bsg.h
index 7a12e1c0f371..02986cf8b6f1 100644
--- a/include/uapi/linux/bsg.h
+++ b/include/uapi/linux/bsg.h
@@ -10,12 +10,13 @@
 #define BSG_SUB_PROTOCOL_SCSI_TRANSPORT	2
 
 /*
- * For flags member below
- * sg.h sg_io_hdr also has bits defined for it's flags member. However
- * none of these bits are implemented/used by bsg. The bits below are
- * allocated to not conflict with sg.h ones anyway.
+ * For flag constants below:
+ * sg.h sg_io_hdr also has bits defined for it's flags member. These
+ * two flag values (0x10 and 0x20) have the same meaning in sg.h . For
+ * bsg the BSG_FLAG_Q_AT_HEAD flag is ignored since it is the deafult.
  */
-#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
+#define BSG_FLAG_Q_AT_TAIL 0x10 /* default is Q_AT_HEAD */
+#define BSG_FLAG_Q_AT_HEAD 0x20
 
 struct sg_io_v4 {
 	__s32 guard;		/* [i] 'Q' to differentiate from v3 */
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
index 19df18c9b8be..1874ebe9ac1e 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input.h
@@ -165,6 +165,7 @@ struct input_keymap_entry {
 #define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
 #define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
 #define INPUT_PROP_TOPBUTTONPAD		0x04	/* softbuttons at top of pad */
+#define INPUT_PROP_POINTING_STICK	0x05	/* is a pointing stick */
 
 #define INPUT_PROP_MAX			0x1f
 #define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)
diff --git a/include/uapi/linux/usbip.h b/include/uapi/linux/usbip.h
new file mode 100644
index 000000000000..fa5db30ede36
--- /dev/null
+++ b/include/uapi/linux/usbip.h
@@ -0,0 +1,26 @@
+/*
+ *	usbip.h
+ *
+ *	USBIP uapi defines and function prototypes etc.
+*/
+
+#ifndef _UAPI_LINUX_USBIP_H
+#define _UAPI_LINUX_USBIP_H
+
+/* usbip device status - exported in usbip device sysfs status */
+enum usbip_device_status {
+	/* sdev is available. */
+	SDEV_ST_AVAILABLE = 0x01,
+	/* sdev is now used. */
+	SDEV_ST_USED,
+	/* sdev is unusable because of a fatal error. */
+	SDEV_ST_ERROR,
+
+	/* vdev does not connect a remote device. */
+	VDEV_ST_NULL,
+	/* vdev is used, but the USB address is not assigned yet */
+	VDEV_ST_NOTASSIGNED,
+	VDEV_ST_USED,
+	VDEV_ST_ERROR
+};
+#endif /* _UAPI_LINUX_USBIP_H */
diff --git a/include/uapi/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h
index 6d8e61c48563..9ad67b267584 100644
--- a/include/uapi/linux/virtio_blk.h
+++ b/include/uapi/linux/virtio_blk.h
@@ -40,6 +40,7 @@
 #define VIRTIO_BLK_F_WCE	9	/* Writeback mode enabled after reset */
 #define VIRTIO_BLK_F_TOPOLOGY	10	/* Topology information is available */
 #define VIRTIO_BLK_F_CONFIG_WCE	11	/* Writeback mode available in config */
+#define VIRTIO_BLK_F_MQ		12	/* support more than one vq */
 
 #ifndef __KERNEL__
 /* Old (deprecated) name for VIRTIO_BLK_F_WCE. */
@@ -77,6 +78,10 @@ struct virtio_blk_config {
 
 	/* writeback mode (if VIRTIO_BLK_F_CONFIG_WCE) */
 	__u8 wce;
+	__u8 unused;
+
+	/* number of vqs, only available when VIRTIO_BLK_F_MQ is set */
+	__u16 num_queues;
 } __attribute__((packed));
 
 /*
diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h
index c38355c1f3c9..1590c49cae57 100644
--- a/include/uapi/linux/xattr.h
+++ b/include/uapi/linux/xattr.h
@@ -13,7 +13,7 @@
 #ifndef _UAPI_LINUX_XATTR_H
 #define _UAPI_LINUX_XATTR_H
 
-#ifdef __UAPI_DEF_XATTR
+#if __UAPI_DEF_XATTR
 #define __USE_KERNEL_XATTR_DEFS
 
 #define XATTR_CREATE	0x1	/* set value, fail if attr already exists */