diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/drm/drm_connector.h | 105 | ||||
-rw-r--r-- | include/drm/drm_device.h | 8 | ||||
-rw-r--r-- | include/drm/drm_vblank.h | 22 | ||||
-rw-r--r-- | include/dt-bindings/clock/imx7d-clock.h | 3 | ||||
-rw-r--r-- | include/dt-bindings/pinctrl/pins-imx8mm.h | 16 | ||||
-rw-r--r-- | include/linux/input/fusion_F0710A.h | 20 | ||||
-rw-r--r-- | include/linux/linux_logo.h | 1 | ||||
-rw-r--r-- | include/linux/mfd/stmpe.h | 21 | ||||
-rw-r--r-- | include/linux/pinctrl/devinfo.h | 4 | ||||
-rw-r--r-- | include/linux/platform_data/usb3503.h | 2 | ||||
-rw-r--r-- | include/linux/sync.h | 390 | ||||
-rw-r--r-- | include/linux/sys_soc.h | 1 | ||||
-rw-r--r-- | include/linux/timer.h | 8 | ||||
-rw-r--r-- | include/linux/usb/phy.h | 6 | ||||
-rw-r--r-- | include/media/v4l2-chip-ident.h | 3 | ||||
-rw-r--r-- | include/video/mxc_hdmi.h | 7 |
16 files changed, 598 insertions, 19 deletions
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index e9e6fb0ba56d..2337de4c80fe 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -181,6 +181,97 @@ enum drm_link_status { }; /** + * enum drm_panel_orientation - panel_orientation info for &drm_display_info + * + * This enum is used to track the (LCD) panel orientation. There are no + * separate #defines for the uapi! + * + * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any + * panel orientation information (normal + * for non panels) in this case the "panel + * orientation" connector prop will not be + * attached. + * @DRM_MODE_PANEL_ORIENTATION_NORMAL: The top side of the panel matches the + * top side of the device's casing. + * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the + * bottom side of the device's casing, iow + * the panel is mounted upside-down. + * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP: The left side of the panel matches the + * top side of the device's casing. + * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the + * top side of the device's casing. + */ +enum drm_panel_orientation { + DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1, + DRM_MODE_PANEL_ORIENTATION_NORMAL = 0, + DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, + DRM_MODE_PANEL_ORIENTATION_LEFT_UP, + DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, +}; + +/** + * enum drm_bus_flags - bus_flags info for &drm_display_info + * + * This enum defines signal polarities and clock edge information for signals on + * a bus as bitmask flags. + * + * The clock edge information is conveyed by two sets of symbols, + * DRM_BUS_FLAGS_*_DRIVE_\* and DRM_BUS_FLAGS_*_SAMPLE_\*. When this enum is + * used to describe a bus from the point of view of the transmitter, the + * \*_DRIVE_\* flags should be used. When used from the point of view of the + * receiver, the \*_SAMPLE_\* flags should be used. The \*_DRIVE_\* and + * \*_SAMPLE_\* flags alias each other, with the \*_SAMPLE_POSEDGE and + * \*_SAMPLE_NEGEDGE flags being equal to \*_DRIVE_NEGEDGE and \*_DRIVE_POSEDGE + * respectively. This simplifies code as signals are usually sampled on the + * opposite edge of the driving edge. Transmitters and receivers may however + * need to take other signal timings into account to convert between driving + * and sample edges. + * + * @DRM_BUS_FLAG_DE_LOW: The Data Enable signal is active low + * @DRM_BUS_FLAG_DE_HIGH: The Data Enable signal is active high + * @DRM_BUS_FLAG_PIXDATA_POSEDGE: Legacy value, do not use + * @DRM_BUS_FLAG_PIXDATA_NEGEDGE: Legacy value, do not use + * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE: Data is driven on the rising edge of + * the pixel clock + * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE: Data is driven on the falling edge of + * the pixel clock + * @DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE: Data is sampled on the rising edge of + * the pixel clock + * @DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE: Data is sampled on the falling edge of + * the pixel clock + * @DRM_BUS_FLAG_DATA_MSB_TO_LSB: Data is transmitted MSB to LSB on the bus + * @DRM_BUS_FLAG_DATA_LSB_TO_MSB: Data is transmitted LSB to MSB on the bus + * @DRM_BUS_FLAG_SYNC_POSEDGE: Legacy value, do not use + * @DRM_BUS_FLAG_SYNC_NEGEDGE: Legacy value, do not use + * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE: Sync signals are driven on the rising + * edge of the pixel clock + * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE: Sync signals are driven on the falling + * edge of the pixel clock + * @DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE: Sync signals are sampled on the rising + * edge of the pixel clock + * @DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE: Sync signals are sampled on the falling + * edge of the pixel clock + */ +enum drm_bus_flags { + DRM_BUS_FLAG_DE_LOW = BIT(0), + DRM_BUS_FLAG_DE_HIGH = BIT(1), + DRM_BUS_FLAG_PIXDATA_POSEDGE = BIT(2), + DRM_BUS_FLAG_PIXDATA_NEGEDGE = BIT(3), + DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE, + DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE, + DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE, + DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE, + DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4), + DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5), + DRM_BUS_FLAG_SYNC_POSEDGE = BIT(6), + DRM_BUS_FLAG_SYNC_NEGEDGE = BIT(7), + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = DRM_BUS_FLAG_SYNC_POSEDGE, + DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = DRM_BUS_FLAG_SYNC_NEGEDGE, + DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_NEGEDGE, + DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_POSEDGE, +}; + +/** * struct drm_display_info - runtime data about the connected sink * * Describes a given display (e.g. CRT or flat panel) and its limitations. For @@ -246,20 +337,10 @@ struct drm_display_info { */ unsigned int num_bus_formats; -#define DRM_BUS_FLAG_DE_LOW (1<<0) -#define DRM_BUS_FLAG_DE_HIGH (1<<1) -/* drive data on pos. edge */ -#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2) -/* drive data on neg. edge */ -#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3) -/* data is transmitted MSB to LSB on the bus */ -#define DRM_BUS_FLAG_DATA_MSB_TO_LSB (1<<4) -/* data is transmitted LSB to MSB on the bus */ -#define DRM_BUS_FLAG_DATA_LSB_TO_MSB (1<<5) - /** * @bus_flags: Additional information (like pixel signal polarity) for - * the pixel data on the bus, using DRM_BUS_FLAGS\_ defines. + * the pixel data on the bus, using &enum drm_bus_flags values + * DRM_BUS_FLAGS\_. */ u32 bus_flags; diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h index 7c4fa32f3fc6..16cd3ba3d8d8 100644 --- a/include/drm/drm_device.h +++ b/include/drm/drm_device.h @@ -147,7 +147,13 @@ struct drm_device { * races and imprecision over longer time periods, hence exposing a * hardware vblank counter is always recommended. * - * If non-zeor, &drm_crtc_funcs.get_vblank_counter must be set. + * This is the statically configured device wide maximum. The driver + * can instead choose to use a runtime configurable per-crtc value + * &drm_vblank_crtc.max_vblank_count, in which case @max_vblank_count + * must be left at zero. See drm_crtc_set_max_vblank_count() on how + * to use the per-crtc value. + * + * If non-zero, &drm_crtc_funcs.get_vblank_counter must be set. */ u32 max_vblank_count; /**< size of vblank counter register */ diff --git a/include/drm/drm_vblank.h b/include/drm/drm_vblank.h index 7fba9efe4951..ec1ce941dec3 100644 --- a/include/drm/drm_vblank.h +++ b/include/drm/drm_vblank.h @@ -105,6 +105,26 @@ struct drm_vblank_crtc { */ u32 last; /** + * @max_vblank_count: + * + * Maximum value of the vblank registers for this crtc. This value +1 + * will result in a wrap-around of the vblank register. It is used + * by the vblank core to handle wrap-arounds. + * + * If set to zero the vblank core will try to guess the elapsed vblanks + * between times when the vblank interrupt is disabled through + * high-precision timestamps. That approach is suffering from small + * races and imprecision over longer time periods, hence exposing a + * hardware vblank counter is always recommended. + * + * This is the runtime configurable per-crtc maximum set through + * drm_crtc_set_max_vblank_count(). If this is used the driver + * must leave the device wide &drm_device.max_vblank_count at zero. + * + * If non-zero, &drm_crtc_funcs.get_vblank_counter must be set. + */ + u32 max_vblank_count; + /** * @inmodeset: Tracks whether the vblank is disabled due to a modeset. * For legacy driver bit 2 additionally tracks whether an additional * temporary vblank reference has been acquired to paper over the @@ -177,4 +197,6 @@ bool drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, void drm_calc_timestamping_constants(struct drm_crtc *crtc, const struct drm_display_mode *mode); wait_queue_head_t *drm_crtc_vblank_waitqueue(struct drm_crtc *crtc); +void drm_crtc_set_max_vblank_count(struct drm_crtc *crtc, + u32 max_vblank_count); #endif diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h index 6b5d908d303e..31223c693da9 100644 --- a/include/dt-bindings/clock/imx7d-clock.h +++ b/include/dt-bindings/clock/imx7d-clock.h @@ -458,6 +458,7 @@ #define IMX7D_PXP_AXI_CLK 444 #define IMX7D_ENET1_IPG_ROOT_CLK 445 #define IMX7D_ENET2_IPG_ROOT_CLK 446 -#define IMX7D_CLK_END 447 +#define IMX7D_KPP_ROOT_CLK 447 +#define IMX7D_CLK_END 448 #endif /* __DT_BINDINGS_CLOCK_IMX7D_H */ diff --git a/include/dt-bindings/pinctrl/pins-imx8mm.h b/include/dt-bindings/pinctrl/pins-imx8mm.h index a409b557f538..3c638e6cf2e2 100644 --- a/include/dt-bindings/pinctrl/pins-imx8mm.h +++ b/include/dt-bindings/pinctrl/pins-imx8mm.h @@ -481,21 +481,37 @@ #define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK 0x1D0 0x438 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x1D0 0x438 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_RTS_B 0x1D0 0x438 0x4F8 0x4 0x2 +#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_CTS_B 0x1D0 0x438 0x4F8 0x4 0x2 +#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x1D0 0x438 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x1D4 0x43C 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1 0x1D4 0x43C 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0 0x1D4 0x43C 0x4D4 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x1D4 0x43C 0x4F8 0x4 0x3 +#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_CTS_B 0x1D4 0x43C 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_RTS_B 0x1D4 0x43C 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x1D4 0x43C 0x4F8 0x4 0x3 #define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1D8 0x440 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_TX 0x1D8 0x440 0x4FC 0x4 0x2 +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_RX 0x1D8 0x440 0x4FC 0x4 0x2 +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x1D8 0x440 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x1DC 0x444 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_RX 0x1DC 0x444 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1DC 0x444 0x4FC 0x4 0x3 +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x1DC 0x444 0x4FC 0x4 0x3 +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_TX 0x1DC 0x444 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2 0x1DC 0x444 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0 diff --git a/include/linux/input/fusion_F0710A.h b/include/linux/input/fusion_F0710A.h new file mode 100644 index 000000000000..7d152cbdd06e --- /dev/null +++ b/include/linux/input/fusion_F0710A.h @@ -0,0 +1,20 @@ +/* linux/input/fusion_F0710A.h + * + * Platform data for Fusion F0710A driver + * + * Copyright (c) 2013 Toradex AG (stefan.agner@toradex.ch) + * + * For licencing details see kernel-base/COPYING + */ + +#ifndef __LINUX_I2C_FUSION_F0710A_H +#define __LINUX_I2C_FUSION_F0710A_H + +/* Board specific touch screen initial values */ +struct fusion_f0710a_init_data { + int (*pinmux_fusion_pins)(void); + int gpio_int; + int gpio_reset; +}; + +#endif /* __LINUX_I2C_FUSION_F0710A_H */ diff --git a/include/linux/linux_logo.h b/include/linux/linux_logo.h index 5e3581d76c7f..0ca1dbd8b854 100644 --- a/include/linux/linux_logo.h +++ b/include/linux/linux_logo.h @@ -48,6 +48,7 @@ extern const struct linux_logo logo_superh_vga16; extern const struct linux_logo logo_superh_clut224; extern const struct linux_logo logo_m32r_clut224; extern const struct linux_logo logo_spe_clut224; +extern const struct linux_logo logo_custom_clut224; extern const struct linux_logo *fb_find_logo(int depth); #ifdef CONFIG_FB_LOGO_EXTRA diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index 4a827af17e59..07f55aac9390 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -10,6 +10,20 @@ #include <linux/mutex.h> +#define STMPE_SAMPLE_TIME(x) ((x & 0xf) << 4) +#define STMPE_MOD_12B(x) ((x & 0x1) << 3) +#define STMPE_REF_SEL(x) ((x & 0x1) << 1) +#define STMPE_ADC_FREQ(x) (x & 0x3) +#define STMPE_AVE_CTRL(x) ((x & 0x3) << 6) +#define STMPE_DET_DELAY(x) ((x & 0x7) << 3) +#define STMPE_SETTLING(x) (x & 0x7) +#define STMPE_FRACTION_Z(x) (x & 0x7) +#define STMPE_I_DRIVE(x) (x & 0x1) +#define STMPE_OP_MODE(x) ((x & 0x7) << 1) + +#define STMPE811_REG_ADC_CTRL1 0x20 +#define STMPE811_REG_ADC_CTRL2 0x21 + struct device; struct regulator; @@ -123,6 +137,12 @@ struct stmpe { u8 ier[2]; u8 oldier[2]; struct stmpe_platform_data *pdata; + + /* For devices that use an ADC */ + u8 sample_time; + u8 mod_12b; + u8 ref_sel; + u8 adc_freq; }; extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data); @@ -136,6 +156,7 @@ extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block); extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks); extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks); +extern int stmpe811_adc_common_init(struct stmpe *stmpe); #define STMPE_GPIO_NOREQ_811_TOUCH (0xf0) diff --git a/include/linux/pinctrl/devinfo.h b/include/linux/pinctrl/devinfo.h index 05082e407c4a..6ced02f4766e 100644 --- a/include/linux/pinctrl/devinfo.h +++ b/include/linux/pinctrl/devinfo.h @@ -15,11 +15,11 @@ #ifndef PINCTRL_DEVINFO_H #define PINCTRL_DEVINFO_H -#ifdef CONFIG_PINCTRL - /* The device core acts as a consumer toward pinctrl */ #include <linux/pinctrl/consumer.h> +#ifdef CONFIG_PINCTRL + /** * struct dev_pin_info - pin state container for devices * @p: pinctrl handle for the containing device diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h index e049d51c1353..435e9edb1bc4 100644 --- a/include/linux/platform_data/usb3503.h +++ b/include/linux/platform_data/usb3503.h @@ -16,7 +16,9 @@ enum usb3503_mode { struct usb3503_platform_data { enum usb3503_mode initial_mode; + u8 port_nrd; u8 port_off_mask; + int gpio_bypass; int gpio_intn; int gpio_connect; int gpio_reset; diff --git a/include/linux/sync.h b/include/linux/sync.h new file mode 100644 index 000000000000..4f1993871467 --- /dev/null +++ b/include/linux/sync.h @@ -0,0 +1,390 @@ +/* + * include/linux/sync.h + * + * Copyright (C) 2012 Google, Inc. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _LINUX_SYNC_H +#define _LINUX_SYNC_H + +#include <linux/types.h> +#ifdef __KERNEL__ + +#include <linux/ktime.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/wait.h> + +struct sync_timeline; +struct sync_pt; +struct sync_fence; + +/** + * struct sync_timeline_ops - sync object implementation ops + * @driver_name: name of the implentation + * @dup: duplicate a sync_pt + * @has_signaled: returns: + * 1 if pt has signaled + * 0 if pt has not signaled + * <0 on error + * @compare: returns: + * 1 if b will signal before a + * 0 if a and b will signal at the same time + * -1 if a will signabl before b + * @free_pt: called before sync_pt is freed + * @release_obj: called before sync_timeline is freed + * @print_obj: print aditional debug information about sync_timeline. + * should not print a newline + * @print_pt: print aditional debug information about sync_pt. + * should not print a newline + * @fill_driver_data: write implmentation specific driver data to data. + * should return an error if there is not enough room + * as specified by size. This information is returned + * to userspace by SYNC_IOC_FENCE_INFO. + */ +struct sync_timeline_ops { + const char *driver_name; + + /* required */ + struct sync_pt *(*dup)(struct sync_pt *pt); + + /* required */ + int (*has_signaled)(struct sync_pt *pt); + + /* required */ + int (*compare)(struct sync_pt *a, struct sync_pt *b); + + /* optional */ + void (*free_pt)(struct sync_pt *sync_pt); + + /* optional */ + void (*release_obj)(struct sync_timeline *sync_timeline); + + /* optional */ + void (*print_obj)(struct seq_file *s, + struct sync_timeline *sync_timeline); + + /* optional */ + void (*print_pt)(struct seq_file *s, struct sync_pt *sync_pt); + + /* optional */ + int (*fill_driver_data)(struct sync_pt *syncpt, void *data, int size); +}; + +/** + * struct sync_timeline - sync object + * @ops: ops that define the implementaiton of the sync_timeline + * @name: name of the sync_timeline. Useful for debugging + * @destoryed: set when sync_timeline is destroyed + * @child_list_head: list of children sync_pts for this sync_timeline + * @child_list_lock: lock protecting @child_list_head, destroyed, and + * sync_pt.status + * @active_list_head: list of active (unsignaled/errored) sync_pts + * @sync_timeline_list: membership in global sync_timeline_list + */ +struct sync_timeline { + const struct sync_timeline_ops *ops; + char name[32]; + + /* protected by child_list_lock */ + bool destroyed; + + struct list_head child_list_head; + spinlock_t child_list_lock; + + struct list_head active_list_head; + spinlock_t active_list_lock; + + struct list_head sync_timeline_list; +}; + +/** + * struct sync_pt - sync point + * @parent: sync_timeline to which this sync_pt belongs + * @child_list: membership in sync_timeline.child_list_head + * @active_list: membership in sync_timeline.active_list_head + * @fence: sync_fence to which the sync_pt belongs + * @pt_list: membership in sync_fence.pt_list_head + * @status: 1: signaled, 0:active, <0: error + * @timestamp: time which sync_pt status transitioned from active to + * singaled or error. + */ +struct sync_pt { + struct sync_timeline *parent; + struct list_head child_list; + + struct list_head active_list; + + struct sync_fence *fence; + struct list_head pt_list; + + /* protected by parent->active_list_lock */ + int status; + + ktime_t timestamp; +}; + +/** + * struct sync_fence - sync fence + * @file: file representing this fence + * @name: name of sync_fence. Useful for debugging + * @pt_list_head: list of sync_pts in ths fence. immutable once fence + * is created + * @waiter_list_head: list of asynchronous waiters on this fence + * @waiter_list_lock: lock protecting @waiter_list_head and @status + * @status: 1: signaled, 0:active, <0: error + * + * @wq: wait queue for fence signaling + * @sync_fence_list: membership in global fence list + */ +struct sync_fence { + struct file *file; + char name[32]; + + /* this list is immutable once the fence is created */ + struct list_head pt_list_head; + + struct list_head waiter_list_head; + spinlock_t waiter_list_lock; /* also protects status */ + int status; + + wait_queue_head_t wq; + + struct list_head sync_fence_list; +}; + +/** + * struct sync_fence_waiter - metadata for asynchronous waiter on a fence + * @waiter_list: membership in sync_fence.waiter_list_head + * @callback: function pointer to call when fence signals + * @callback_data: pointer to pass to @callback + */ +struct sync_fence_waiter { + struct list_head waiter_list; + + void (*callback)(struct sync_fence *fence, void *data); + void *callback_data; +}; + +/* + * API for sync_timeline implementers + */ + +/** + * sync_timeline_create() - creates a sync object + * @ops: specifies the implemention ops for the object + * @size: size to allocate for this obj + * @name: sync_timeline name + * + * Creates a new sync_timeline which will use the implemetation specified by + * @ops. @size bytes will be allocated allowing for implemntation specific + * data to be kept after the generic sync_timeline stuct. + */ +struct sync_timeline *sync_timeline_create(const struct sync_timeline_ops *ops, + int size, const char *name); + +/** + * sync_timeline_destory() - destorys a sync object + * @obj: sync_timeline to destroy + * + * A sync implemntation should call this when the @obj is going away + * (i.e. module unload.) @obj won't actually be freed until all its childern + * sync_pts are freed. + */ +void sync_timeline_destroy(struct sync_timeline *obj); + +/** + * sync_timeline_signal() - signal a status change on a sync_timeline + * @obj: sync_timeline to signal + * + * A sync implemntation should call this any time one of it's sync_pts + * has signaled or has an error condition. + */ +void sync_timeline_signal(struct sync_timeline *obj); + +/** + * sync_pt_create() - creates a sync pt + * @parent: sync_pt's parent sync_timeline + * @size: size to allocate for this pt + * + * Creates a new sync_pt as a chiled of @parent. @size bytes will be + * allocated allowing for implemntation specific data to be kept after + * the generic sync_timeline struct. + */ +struct sync_pt *sync_pt_create(struct sync_timeline *parent, int size); + +/** + * sync_pt_free() - frees a sync pt + * @pt: sync_pt to free + * + * This should only be called on sync_pts which have been created but + * not added to a fence. + */ +void sync_pt_free(struct sync_pt *pt); + +/** + * sync_fence_create() - creates a sync fence + * @name: name of fence to create + * @pt: sync_pt to add to the fence + * + * Creates a fence containg @pt. Once this is called, the fence takes + * ownership of @pt. + */ +struct sync_fence *sync_fence_create(const char *name, struct sync_pt *pt); + +/* + * API for sync_fence consumers + */ + +/** + * sync_fence_merge() - merge two fences + * @name: name of new fence + * @a: fence a + * @b: fence b + * + * Creates a new fence which contains copies of all the sync_pts in both + * @a and @b. @a and @b remain valid, independent fences. + */ +struct sync_fence *sync_fence_merge(const char *name, + struct sync_fence *a, struct sync_fence *b); + +/** + * sync_fence_fdget() - get a fence from an fd + * @fd: fd referencing a fence + * + * Ensures @fd references a valid fence, increments the refcount of the backing + * file, and returns the fence. + */ +struct sync_fence *sync_fence_fdget(int fd); + +/** + * sync_fence_put() - puts a refernnce of a sync fence + * @fence: fence to put + * + * Puts a reference on @fence. If this is the last reference, the fence and + * all it's sync_pts will be freed + */ +void sync_fence_put(struct sync_fence *fence); + +/** + * sync_fence_install() - installs a fence into a file descriptor + * @fence: fence to instal + * @fd: file descriptor in which to install the fence + * + * Installs @fence into @fd. @fd's should be acquired through get_unused_fd(). + */ +void sync_fence_install(struct sync_fence *fence, int fd); + +/** + * sync_fence_wait_async() - registers and async wait on the fence + * @fence: fence to wait on + * @callback: callback + * @callback_data data to pass to the callback + * + * Returns 1 if @fence has already signaled. + * + * Registers a callback to be called when @fence signals or has an error + */ +int sync_fence_wait_async(struct sync_fence *fence, + void (*callback)(struct sync_fence *, void *data), + void *callback_data); + +/** + * sync_fence_wait() - wait on fence + * @fence: fence to wait on + * @tiemout: timeout in ms + * + * Wait for @fence to be signaled or have an error. Waits indefintly + * if @timeout = 0 + */ +int sync_fence_wait(struct sync_fence *fence, long timeout); + +#endif /* __KERNEL__ */ + +/** + * struct sync_merge_data - data passed to merge ioctl + * @fd2: file descriptor of second fence + * @name: name of new fence + * @fence: returns the fd of the new fence to userspace + */ +struct sync_merge_data { + __s32 fd2; /* fd of second fence */ + char name[32]; /* name of new fence */ + __s32 fence; /* fd on newly created fence */ +}; + +/** + * struct sync_pt_info - detailed sync_pt information + * @len: length of sync_pt_info including any driver_data + * @obj_name: name of parent sync_timeline + * @driver_name: name of driver implmenting the parent + * @status: status of the sync_pt 0:active 1:signaled <0:error + * @timestamp_ns: timestamp of status change in nanoseconds + * @driver_data: any driver dependant data + */ +struct sync_pt_info { + __u32 len; + char obj_name[32]; + char driver_name[32]; + __s32 status; + __u64 timestamp_ns; + + __u8 driver_data[0]; +}; + +/** + * struct sync_fence_info_data - data returned from fence info ioctl + * @len: ioctl caller writes the size of the buffer its passing in. + * ioctl returns length of sync_fence_data reutnred to userspace + * including pt_info. + * @name: name of fence + * @status: status of fence. 1: signaled 0:active <0:error + * @pt_info: a sync_pt_info struct for every sync_pt in the fence + */ +struct sync_fence_info_data { + __u32 len; + char name[32]; + __s32 status; + + __u8 pt_info[0]; +}; + +#define SYNC_IOC_MAGIC '>' + +/** + * DOC: SYNC_IOC_WAIT - wait for a fence to signal + * + * pass timeout in milliseconds. + */ +#define SYNC_IOC_WAIT _IOW(SYNC_IOC_MAGIC, 0, __u32) + +/** + * DOC: SYNC_IOC_MERGE - merge two fences + * + * Takes a struct sync_merge_data. Creates a new fence containing copies of + * the sync_pts in both the calling fd and sync_merge_data.fd2. Returns the + * new fence's fd in sync_merge_data.fence + */ +#define SYNC_IOC_MERGE _IOWR(SYNC_IOC_MAGIC, 1, struct sync_merge_data) + +/** + * DOC: SYNC_IOC_FENCE_INFO - get detailed information on a fence + * + * Takes a struct sync_fence_info_data with extra space allocated for pt_info. + * Caller should write the size of the buffer into len. On return, len is + * updated to reflect the total size of the sync_fence_info_data including + * pt_info. + * + * pt_info is a buffer containing sync_pt_infos for every sync_pt in the fence. + * To itterate over the sync_pt_infos, use the sync_pt_info.len field. + */ +#define SYNC_IOC_FENCE_INFO _IOWR(SYNC_IOC_MAGIC, 2,\ + struct sync_fence_info_data) + +#endif /* _LINUX_SYNC_H */ diff --git a/include/linux/sys_soc.h b/include/linux/sys_soc.h index bed223b70217..16cdbdb09100 100644 --- a/include/linux/sys_soc.h +++ b/include/linux/sys_soc.h @@ -14,6 +14,7 @@ struct soc_device_attribute { const char *revision; const char *soc_id; const void *data; + const char *unique_id; }; /** diff --git a/include/linux/timer.h b/include/linux/timer.h index e0ea1fe87572..478272ef2e50 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -180,6 +180,14 @@ static inline void timer_setup(struct timer_list *timer, (TIMER_DATA_TYPE)timer, flags); } +static inline void timer_setup_on_stack(struct timer_list *timer, + void (*callback)(struct timer_list *), + unsigned int flags) +{ + __setup_timer_on_stack(timer, (TIMER_FUNC_TYPE)callback, + (TIMER_DATA_TYPE)timer, flags); +} + #define from_timer(var, callback_timer, timer_fieldname) \ container_of(callback_timer, typeof(*var), timer_fieldname) diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index ef89950cb68a..178cc094e9d4 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -65,9 +65,9 @@ enum usb_otg_state { /* The usb role of phy to be working with */ enum usb_current_mode { - USB_MODE_NONE, - USB_MODE_HOST, - USB_MODE_DEVICE, + USB_CURRENT_MODE_NONE, + USB_CURRENT_MODE_HOST, + USB_CURRENT_MODE_DEVICE, }; struct usb_phy; diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index b4c8416c3d1f..284d4d1695c5 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -185,6 +185,9 @@ enum { /* module saa7191: just ident 7191 */ V4L2_IDENT_SAA7191 = 7191, + /* module adv7280: just ident 7280 */ + V4L2_IDENT_ADV7280 = 7280, + /* module ths7303: just ident 7303 */ V4L2_IDENT_THS7303 = 7303, diff --git a/include/video/mxc_hdmi.h b/include/video/mxc_hdmi.h index 79eb3024f65c..bb0d33a2d460 100644 --- a/include/video/mxc_hdmi.h +++ b/include/video/mxc_hdmi.h @@ -573,6 +573,10 @@ enum { HDMI_IH_MUTE_PHY_STAT0_TX_PHY_LOCK = 0x2, HDMI_IH_MUTE_PHY_STAT0_HPD = 0x1, +/* IH and IH_MUTE convenience macro RX_SENSE | HPD*/ + HDMI_DVI_IH_STAT = 0x3D, + + /* IH_AHBDMAAUD_STAT0 field values */ HDMI_IH_AHBDMAAUD_STAT0_ERROR = 0x20, HDMI_IH_AHBDMAAUD_STAT0_LOST = 0x10, @@ -871,6 +875,9 @@ enum { HDMI_PHY_HPD = 0x02, HDMI_PHY_TX_PHY_LOCK = 0x01, +/* HDMI STAT convenience RX_SENSE | HPD */ + HDMI_DVI_STAT = 0xF2, + /* PHY_I2CM_SLAVE_ADDR field values */ HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2 = 0x69, HDMI_PHY_I2CM_SLAVE_ADDR_HEAC_PHY = 0x49, |