diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/dt-bindings/clk/exynos-audss-clk.h | 25 | ||||
| -rw-r--r-- | include/linux/omap-mailbox.h | 29 | ||||
| -rw-r--r-- | include/linux/platform_data/dma-ste-dma40.h | 41 | ||||
| -rw-r--r-- | include/linux/platform_data/mailbox-omap.h | 58 | ||||
| -rw-r--r-- | include/linux/platform_data/usb-musb-ux500.h | 5 |
5 files changed, 120 insertions, 38 deletions
diff --git a/include/dt-bindings/clk/exynos-audss-clk.h b/include/dt-bindings/clk/exynos-audss-clk.h new file mode 100644 index 000000000000..8279f427c60f --- /dev/null +++ b/include/dt-bindings/clk/exynos-audss-clk.h @@ -0,0 +1,25 @@ +/* + * This header provides constants for Samsung audio subsystem + * clock controller. + * + * The constants defined in this header are being used in dts + * and exynos audss driver. + */ + +#ifndef _DT_BINDINGS_CLK_EXYNOS_AUDSS_H +#define _DT_BINDINGS_CLK_EXYNOS_AUDSS_H + +#define EXYNOS_MOUT_AUDSS 0 +#define EXYNOS_MOUT_I2S 1 +#define EXYNOS_DOUT_SRP 2 +#define EXYNOS_DOUT_AUD_BUS 3 +#define EXYNOS_DOUT_I2S 4 +#define EXYNOS_SRP_CLK 5 +#define EXYNOS_I2S_BUS 6 +#define EXYNOS_SCLK_I2S 7 +#define EXYNOS_PCM_BUS 8 +#define EXYNOS_SCLK_PCM 9 + +#define EXYNOS_AUDSS_MAX_CLKS 10 + +#endif diff --git a/include/linux/omap-mailbox.h b/include/linux/omap-mailbox.h new file mode 100644 index 000000000000..f8322d9cd235 --- /dev/null +++ b/include/linux/omap-mailbox.h @@ -0,0 +1,29 @@ +/* + * omap-mailbox: interprocessor communication module for OMAP + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef OMAP_MAILBOX_H +#define OMAP_MAILBOX_H + +typedef u32 mbox_msg_t; +struct omap_mbox; + +typedef int __bitwise omap_mbox_irq_t; +#define IRQ_TX ((__force omap_mbox_irq_t) 1) +#define IRQ_RX ((__force omap_mbox_irq_t) 2) + +int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg); + +struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb); +void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb); + +void omap_mbox_save_ctx(struct omap_mbox *mbox); +void omap_mbox_restore_ctx(struct omap_mbox *mbox); +void omap_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq); +void omap_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq); + +#endif /* OMAP_MAILBOX_H */ diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h index 4b781014b0a0..1bb9b1852256 100644 --- a/include/linux/platform_data/dma-ste-dma40.h +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -70,23 +70,8 @@ enum stedma40_flow_ctrl { STEDMA40_FLOW_CTRL, }; -enum stedma40_periph_data_width { - STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT, - STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT, - STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT, - STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT -}; - -enum stedma40_xfer_dir { - STEDMA40_MEM_TO_MEM = 1, - STEDMA40_MEM_TO_PERIPH, - STEDMA40_PERIPH_TO_MEM, - STEDMA40_PERIPH_TO_PERIPH -}; - - /** - * struct stedma40_chan_cfg - dst/src channel configuration + * struct stedma40_half_channel_info - dst/src channel configuration * * @big_endian: true if the src/dst should be read as big endian * @data_width: Data width of the src/dst hardware @@ -95,7 +80,7 @@ enum stedma40_xfer_dir { */ struct stedma40_half_channel_info { bool big_endian; - enum stedma40_periph_data_width data_width; + enum dma_slave_buswidth data_width; int psize; enum stedma40_flow_ctrl flow_ctrl; }; @@ -109,8 +94,7 @@ struct stedma40_half_channel_info { * version 3+, i.e DB8500v2+ * @mode: channel mode: physical, logical, or operation * @mode_opt: options for the chosen channel mode - * @src_dev_type: Src device type - * @dst_dev_type: Dst device type + * @dev_type: src/dst device type (driver uses dir to figure out which) * @src_info: Parameters for dst half channel * @dst_info: Parameters for dst half channel * @use_fixed_channel: if true, use physical channel specified by phy_channel @@ -121,13 +105,12 @@ struct stedma40_half_channel_info { * */ struct stedma40_chan_cfg { - enum stedma40_xfer_dir dir; + enum dma_transfer_direction dir; bool high_priority; bool realtime; enum stedma40_mode mode; enum stedma40_mode_opt mode_opt; - int src_dev_type; - int dst_dev_type; + int dev_type; struct stedma40_half_channel_info src_info; struct stedma40_half_channel_info dst_info; @@ -138,13 +121,8 @@ struct stedma40_chan_cfg { /** * struct stedma40_platform_data - Configuration struct for the dma device. * - * @dev_len: length of dev_tx and dev_rx * @dev_tx: mapping between destination event line and io address * @dev_rx: mapping between source event line and io address - * @memcpy: list of memcpy event lines - * @memcpy_len: length of memcpy - * @memcpy_conf_phy: default configuration of physical channel memcpy - * @memcpy_conf_log: default configuration of logical channel memcpy * @disabled_channels: A vector, ending with -1, that marks physical channels * that are for different reasons not available for the driver. * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW @@ -154,22 +132,17 @@ struct stedma40_chan_cfg { * @num_of_soft_lli_chans: The number of channels that needs to be configured * to use SoftLLI. * @use_esram_lcla: flag for mapping the lcla into esram region + * @num_of_memcpy_chans: The number of channels reserved for memcpy. * @num_of_phy_chans: The number of physical channels implemented in HW. * 0 means reading the number of channels from DMA HW but this is only valid * for 'multiple of 4' channels, like 8. */ struct stedma40_platform_data { - u32 dev_len; - const dma_addr_t *dev_tx; - const dma_addr_t *dev_rx; - int *memcpy; - u32 memcpy_len; - struct stedma40_chan_cfg *memcpy_conf_phy; - struct stedma40_chan_cfg *memcpy_conf_log; int disabled_channels[STEDMA40_MAX_PHYS]; int *soft_lli_chans; int num_of_soft_lli_chans; bool use_esram_lcla; + int num_of_memcpy_chans; int num_of_phy_chans; }; diff --git a/include/linux/platform_data/mailbox-omap.h b/include/linux/platform_data/mailbox-omap.h new file mode 100644 index 000000000000..4631dbb4255e --- /dev/null +++ b/include/linux/platform_data/mailbox-omap.h @@ -0,0 +1,58 @@ +/* + * mailbox-omap.h + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _PLAT_MAILBOX_H +#define _PLAT_MAILBOX_H + +/* Interrupt register configuration types */ +#define MBOX_INTR_CFG_TYPE1 (0) +#define MBOX_INTR_CFG_TYPE2 (1) + +/** + * struct omap_mbox_dev_info - OMAP mailbox device attribute info + * @name: name of the mailbox device + * @tx_id: mailbox queue id used for transmitting messages + * @rx_id: mailbox queue id on which messages are received + * @irq_id: irq identifier number to use from the hwmod data + * @usr_id: mailbox user id for identifying the interrupt into + * the MPU interrupt controller. + */ +struct omap_mbox_dev_info { + const char *name; + u32 tx_id; + u32 rx_id; + u32 irq_id; + u32 usr_id; +}; + +/** + * struct omap_mbox_pdata - OMAP mailbox platform data + * @intr_type: type of interrupt configuration registers used + while programming mailbox queue interrupts + * @num_users: number of users (processor devices) that the mailbox + * h/w block can interrupt + * @num_fifos: number of h/w fifos within the mailbox h/w block + * @info_cnt: number of mailbox devices for the platform + * @info: array of mailbox device attributes + */ +struct omap_mbox_pdata { + u32 intr_type; + u32 num_users; + u32 num_fifos; + u32 info_cnt; + struct omap_mbox_dev_info *info; +}; + +#endif /* _PLAT_MAILBOX_H */ diff --git a/include/linux/platform_data/usb-musb-ux500.h b/include/linux/platform_data/usb-musb-ux500.h index 4c1cc50a595a..dd9c83ac7de0 100644 --- a/include/linux/platform_data/usb-musb-ux500.h +++ b/include/linux/platform_data/usb-musb-ux500.h @@ -9,14 +9,11 @@ #include <linux/dmaengine.h> -#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8 -#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8 +#define UX500_MUSB_DMA_NUM_RX_TX_CHANNELS 8 struct ux500_musb_board_data { void **dma_rx_param_array; void **dma_tx_param_array; - u32 num_rx_channels; - u32 num_tx_channels; bool (*dma_filter)(struct dma_chan *chan, void *filter_param); }; |