summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-m68knommu/dma-mapping.h3
-rw-r--r--include/asm-m68knommu/m520xsim.h12
-rw-r--r--include/asm-m68knommu/scatterlist.h2
-rw-r--r--include/asm-s390/cio.h9
-rw-r--r--include/asm-s390/cpcmd.h10
-rw-r--r--include/asm-s390/kexec.h2
-rw-r--r--include/asm-s390/lowcore.h8
-rw-r--r--include/asm-s390/pgtable.h15
-rw-r--r--include/asm-s390/reset.h23
-rw-r--r--include/asm-s390/setup.h15
-rw-r--r--include/asm-s390/smp.h8
-rw-r--r--include/asm-s390/system.h10
-rw-r--r--include/asm-s390/termios.h34
-rw-r--r--include/asm-s390/uaccess.h18
-rw-r--r--include/asm-s390/zcrypt.h91
-rw-r--r--include/linux/Kbuild4
-rw-r--r--include/linux/ftape-header-segment.h122
-rw-r--r--include/linux/ftape-vendors.h137
-rw-r--r--include/linux/ftape.h201
-rw-r--r--include/linux/zftape.h87
20 files changed, 146 insertions, 665 deletions
diff --git a/include/asm-m68knommu/dma-mapping.h b/include/asm-m68knommu/dma-mapping.h
index 5622b855a577..6aeab18e58bd 100644
--- a/include/asm-m68knommu/dma-mapping.h
+++ b/include/asm-m68knommu/dma-mapping.h
@@ -1,9 +1,10 @@
#ifndef _M68KNOMMU_DMA_MAPPING_H
#define _M68KNOMMU_DMA_MAPPING_H
-
#ifdef CONFIG_PCI
#include <asm-generic/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
#endif
#endif /* _M68KNOMMU_DMA_MAPPING_H */
diff --git a/include/asm-m68knommu/m520xsim.h b/include/asm-m68knommu/m520xsim.h
index 1dac22ea95ba..49d016e6391a 100644
--- a/include/asm-m68knommu/m520xsim.h
+++ b/include/asm-m68knommu/m520xsim.h
@@ -31,6 +31,16 @@
#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */
+/*
+ * SDRAM configuration registers.
+ */
+#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */
+#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */
+#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */
+#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */
+#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */
+#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */
+
#define MCF_GPIO_PAR_UART (0xA4036)
#define MCF_GPIO_PAR_FECI2C (0xA4033)
@@ -47,7 +57,7 @@
#define ICR_INTRCONF 0x05
#define MCFPIT_IMR MCFINTC_IMRL
-#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1)
+#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1)
/****************************************************************************/
#endif /* m520xsim_h */
diff --git a/include/asm-m68knommu/scatterlist.h b/include/asm-m68knommu/scatterlist.h
index 12309b181d29..2085d6ff8782 100644
--- a/include/asm-m68knommu/scatterlist.h
+++ b/include/asm-m68knommu/scatterlist.h
@@ -10,7 +10,7 @@ struct scatterlist {
unsigned int length;
};
-#define sg_address(sg) (page_address((sg)->page) + (sg)->offset
+#define sg_address(sg) (page_address((sg)->page) + (sg)->offset)
#define sg_dma_address(sg) ((sg)->dma_address)
#define sg_dma_len(sg) ((sg)->length)
diff --git a/include/asm-s390/cio.h b/include/asm-s390/cio.h
index 81287d86329d..d92785030980 100644
--- a/include/asm-s390/cio.h
+++ b/include/asm-s390/cio.h
@@ -278,17 +278,16 @@ struct ccw_dev_id {
static inline int ccw_dev_id_is_equal(struct ccw_dev_id *dev_id1,
struct ccw_dev_id *dev_id2)
{
- return !memcmp(dev_id1, dev_id2, sizeof(struct ccw_dev_id));
+ if ((dev_id1->ssid == dev_id2->ssid) &&
+ (dev_id1->devno == dev_id2->devno))
+ return 1;
+ return 0;
}
extern int diag210(struct diag210 *addr);
extern void wait_cons_dev(void);
-extern void clear_all_subchannels(void);
-
-extern void cio_reset_channel_paths(void);
-
extern void css_schedule_reprobe(void);
extern void reipl_ccw_dev(struct ccw_dev_id *id);
diff --git a/include/asm-s390/cpcmd.h b/include/asm-s390/cpcmd.h
index 1fcf65be7a23..48a9eab16429 100644
--- a/include/asm-s390/cpcmd.h
+++ b/include/asm-s390/cpcmd.h
@@ -7,8 +7,8 @@
* Christian Borntraeger (cborntra@de.ibm.com),
*/
-#ifndef __CPCMD__
-#define __CPCMD__
+#ifndef _ASM_S390_CPCMD_H
+#define _ASM_S390_CPCMD_H
/*
* the lowlevel function for cpcmd
@@ -16,9 +16,6 @@
*/
extern int __cpcmd(const char *cmd, char *response, int rlen, int *response_code);
-#ifndef __s390x__
-#define cpcmd __cpcmd
-#else
/*
* cpcmd is the in-kernel interface for issuing CP commands
*
@@ -33,6 +30,5 @@ extern int __cpcmd(const char *cmd, char *response, int rlen, int *response_code
* NOTE: If the response buffer is not below 2 GB, cpcmd can sleep
*/
extern int cpcmd(const char *cmd, char *response, int rlen, int *response_code);
-#endif /*__s390x__*/
-#endif
+#endif /* _ASM_S390_CPCMD_H */
diff --git a/include/asm-s390/kexec.h b/include/asm-s390/kexec.h
index ce28ddda0f50..9c35c8ad1afd 100644
--- a/include/asm-s390/kexec.h
+++ b/include/asm-s390/kexec.h
@@ -26,7 +26,7 @@
/* Maximum address we can use for the control pages */
/* Not more than 2GB */
-#define KEXEC_CONTROL_MEMORY_LIMIT (1<<31)
+#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
/* Allocate one page for the pdp and the second for the code */
#define KEXEC_CONTROL_CODE_SIZE 4096
diff --git a/include/asm-s390/lowcore.h b/include/asm-s390/lowcore.h
index 06583ed0bde7..74f7389bd3ee 100644
--- a/include/asm-s390/lowcore.h
+++ b/include/asm-s390/lowcore.h
@@ -362,6 +362,14 @@ static inline void set_prefix(__u32 address)
asm volatile("spx %0" : : "m" (address) : "memory");
}
+static inline __u32 store_prefix(void)
+{
+ __u32 address;
+
+ asm volatile("stpx %0" : "=m" (address));
+ return address;
+}
+
#define __PANIC_MAGIC 0xDEADC0DE
#endif
diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h
index 36bb6dacf008..2d968a69ed1f 100644
--- a/include/asm-s390/pgtable.h
+++ b/include/asm-s390/pgtable.h
@@ -110,13 +110,22 @@ extern char empty_zero_page[PAGE_SIZE];
#define VMALLOC_OFFSET (8*1024*1024)
#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) \
& ~(VMALLOC_OFFSET-1))
+
+/*
+ * We need some free virtual space to be able to do vmalloc.
+ * VMALLOC_MIN_SIZE defines the minimum size of the vmalloc
+ * area. On a machine with 2GB memory we make sure that we
+ * have at least 128MB free space for vmalloc. On a machine
+ * with 4TB we make sure we have at least 1GB.
+ */
#ifndef __s390x__
-# define VMALLOC_END (0x7fffffffL)
+#define VMALLOC_MIN_SIZE 0x8000000UL
+#define VMALLOC_END 0x80000000UL
#else /* __s390x__ */
-# define VMALLOC_END (0x40000000000L)
+#define VMALLOC_MIN_SIZE 0x40000000UL
+#define VMALLOC_END 0x40000000000UL
#endif /* __s390x__ */
-
/*
* A 31 bit pagetable entry of S390 has following format:
* | PFRA | | OS |
diff --git a/include/asm-s390/reset.h b/include/asm-s390/reset.h
new file mode 100644
index 000000000000..9b439cf67800
--- /dev/null
+++ b/include/asm-s390/reset.h
@@ -0,0 +1,23 @@
+/*
+ * include/asm-s390/reset.h
+ *
+ * Copyright IBM Corp. 2006
+ * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_RESET_H
+#define _ASM_S390_RESET_H
+
+#include <linux/list.h>
+
+struct reset_call {
+ struct list_head list;
+ void (*fn)(void);
+};
+
+extern void register_reset_call(struct reset_call *reset);
+extern void unregister_reset_call(struct reset_call *reset);
+extern void s390_reset_system(void);
+extern void (*s390_reset_mcck_handler)(void);
+
+#endif /* _ASM_S390_RESET_H */
diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h
index 5d72eda8a11b..7664bacdd832 100644
--- a/include/asm-s390/setup.h
+++ b/include/asm-s390/setup.h
@@ -2,7 +2,7 @@
* include/asm-s390/setup.h
*
* S390 version
- * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright IBM Corp. 1999,2006
*/
#ifndef _ASM_S390_SETUP_H
@@ -30,6 +30,17 @@
#endif /* __s390x__ */
#define COMMAND_LINE ((char *) (0x10480))
+#define CHUNK_READ_WRITE 0
+#define CHUNK_READ_ONLY 1
+
+struct mem_chunk {
+ unsigned long addr;
+ unsigned long size;
+ unsigned long type;
+};
+
+extern struct mem_chunk memory_chunk[];
+
/*
* Machine features detected in head.S
*/
@@ -53,7 +64,6 @@ extern unsigned long machine_flags;
#define MACHINE_HAS_MVCOS (machine_flags & 512)
#endif /* __s390x__ */
-
#define MACHINE_HAS_SCLP (!MACHINE_IS_P390)
/*
@@ -71,7 +81,6 @@ extern unsigned int console_irq;
#define SET_CONSOLE_3215 do { console_mode = 2; } while (0)
#define SET_CONSOLE_3270 do { console_mode = 3; } while (0)
-
struct ipl_list_hdr {
u32 len;
u8 reserved1[3];
diff --git a/include/asm-s390/smp.h b/include/asm-s390/smp.h
index c3cf030ada4d..7097c96ed026 100644
--- a/include/asm-s390/smp.h
+++ b/include/asm-s390/smp.h
@@ -18,6 +18,7 @@
#include <asm/lowcore.h>
#include <asm/sigp.h>
+#include <asm/ptrace.h>
/*
s390 specific smp.c headers
@@ -101,6 +102,13 @@ smp_call_function_on(void (*func) (void *info), void *info,
func(info);
return 0;
}
+
+static inline void smp_send_stop(void)
+{
+ /* Disable all interrupts/machine checks */
+ __load_psw_mask(PSW_KERNEL_BITS & ~PSW_MASK_MCHECK);
+}
+
#define smp_cpu_not_running(cpu) 1
#define smp_get_cpu(cpu) ({ 0; })
#define smp_put_cpu(cpu) ({ 0; })
diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h
index ccbafe4bf2cb..bd0b05ae87d2 100644
--- a/include/asm-s390/system.h
+++ b/include/asm-s390/system.h
@@ -115,6 +115,16 @@ extern void account_system_vtime(struct task_struct *);
#define account_vtime(x) do { /* empty */ } while (0)
#endif
+#ifdef CONFIG_PFAULT
+extern void pfault_irq_init(void);
+extern int pfault_init(void);
+extern void pfault_fini(void);
+#else /* CONFIG_PFAULT */
+#define pfault_irq_init() do { } while (0)
+#define pfault_init() ({-1;})
+#define pfault_fini() do { } while (0)
+#endif /* CONFIG_PFAULT */
+
#define finish_arch_switch(prev) do { \
set_fs(current->thread.mm_segment); \
account_vtime(prev); \
diff --git a/include/asm-s390/termios.h b/include/asm-s390/termios.h
index d1e29cca54c9..62b23caf370e 100644
--- a/include/asm-s390/termios.h
+++ b/include/asm-s390/termios.h
@@ -75,39 +75,7 @@ struct termio {
*/
#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
- unsigned short __tmp; \
- get_user(__tmp,&(termio)->x); \
- (termios)->x = (0xffff0000 & ((termios)->x)) | __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
- SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
- copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
- put_user((termios)->c_iflag, &(termio)->c_iflag); \
- put_user((termios)->c_oflag, &(termio)->c_oflag); \
- put_user((termios)->c_cflag, &(termio)->c_cflag); \
- put_user((termios)->c_lflag, &(termio)->c_lflag); \
- put_user((termios)->c_line, &(termio)->c_line); \
- copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+#include <asm-generic/termios.h>
#endif /* __KERNEL__ */
diff --git a/include/asm-s390/uaccess.h b/include/asm-s390/uaccess.h
index 72ae4efddb49..73ac4e82217b 100644
--- a/include/asm-s390/uaccess.h
+++ b/include/asm-s390/uaccess.h
@@ -201,7 +201,7 @@ extern int __get_user_bad(void) __attribute__((noreturn));
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*/
-static inline unsigned long
+static inline unsigned long __must_check
__copy_to_user(void __user *to, const void *from, unsigned long n)
{
if (__builtin_constant_p(n) && (n <= 256))
@@ -226,7 +226,7 @@ __copy_to_user(void __user *to, const void *from, unsigned long n)
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*/
-static inline unsigned long
+static inline unsigned long __must_check
copy_to_user(void __user *to, const void *from, unsigned long n)
{
might_sleep();
@@ -252,7 +252,7 @@ copy_to_user(void __user *to, const void *from, unsigned long n)
* If some data could not be copied, this function will pad the copied
* data to the requested size using zero bytes.
*/
-static inline unsigned long
+static inline unsigned long __must_check
__copy_from_user(void *to, const void __user *from, unsigned long n)
{
if (__builtin_constant_p(n) && (n <= 256))
@@ -277,7 +277,7 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
* If some data could not be copied, this function will pad the copied
* data to the requested size using zero bytes.
*/
-static inline unsigned long
+static inline unsigned long __must_check
copy_from_user(void *to, const void __user *from, unsigned long n)
{
might_sleep();
@@ -288,13 +288,13 @@ copy_from_user(void *to, const void __user *from, unsigned long n)
return n;
}
-static inline unsigned long
+static inline unsigned long __must_check
__copy_in_user(void __user *to, const void __user *from, unsigned long n)
{
return uaccess.copy_in_user(n, to, from);
}
-static inline unsigned long
+static inline unsigned long __must_check
copy_in_user(void __user *to, const void __user *from, unsigned long n)
{
might_sleep();
@@ -306,7 +306,7 @@ copy_in_user(void __user *to, const void __user *from, unsigned long n)
/*
* Copy a null terminated string from userspace.
*/
-static inline long
+static inline long __must_check
strncpy_from_user(char *dst, const char __user *src, long count)
{
long res = -EFAULT;
@@ -343,13 +343,13 @@ strnlen_user(const char __user * src, unsigned long n)
* Zero Userspace
*/
-static inline unsigned long
+static inline unsigned long __must_check
__clear_user(void __user *to, unsigned long n)
{
return uaccess.clear_user(n, to);
}
-static inline unsigned long
+static inline unsigned long __must_check
clear_user(void __user *to, unsigned long n)
{
might_sleep();
diff --git a/include/asm-s390/zcrypt.h b/include/asm-s390/zcrypt.h
index 7244c68464f2..b90e55888a55 100644
--- a/include/asm-s390/zcrypt.h
+++ b/include/asm-s390/zcrypt.h
@@ -180,40 +180,8 @@ struct ica_xcRB {
* for the implementation details for the contents of the
* block
*
- * Z90STAT_TOTALCOUNT
- * Return an integer count of all device types together.
- *
- * Z90STAT_PCICACOUNT
- * Return an integer count of all PCICAs.
- *
- * Z90STAT_PCICCCOUNT
- * Return an integer count of all PCICCs.
- *
- * Z90STAT_PCIXCCMCL2COUNT
- * Return an integer count of all MCL2 PCIXCCs.
- *
- * Z90STAT_PCIXCCMCL3COUNT
- * Return an integer count of all MCL3 PCIXCCs.
- *
- * Z90STAT_CEX2CCOUNT
- * Return an integer count of all CEX2Cs.
- *
- * Z90STAT_CEX2ACOUNT
- * Return an integer count of all CEX2As.
- *
- * Z90STAT_REQUESTQ_COUNT
- * Return an integer count of the number of entries waiting to be
- * sent to a device.
- *
- * Z90STAT_PENDINGQ_COUNT
- * Return an integer count of the number of entries sent to a
- * device awaiting the reply.
- *
- * Z90STAT_TOTALOPEN_COUNT
- * Return an integer count of the number of open file handles.
- *
- * Z90STAT_DOMAIN_INDEX
- * Return the integer value of the Cryptographic Domain.
+ * ZSECSENDCPRB
+ * Send an arbitrary CPRB to a crypto card.
*
* Z90STAT_STATUS_MASK
* Return an 64 element array of unsigned chars for the status of
@@ -235,28 +203,51 @@ struct ica_xcRB {
* of successfully completed requests per device since the device
* was detected and made available.
*
- * ICAZ90STATUS (deprecated)
+ * Z90STAT_REQUESTQ_COUNT
+ * Return an integer count of the number of entries waiting to be
+ * sent to a device.
+ *
+ * Z90STAT_PENDINGQ_COUNT
+ * Return an integer count of the number of entries sent to all
+ * devices awaiting the reply.
+ *
+ * Z90STAT_TOTALOPEN_COUNT
+ * Return an integer count of the number of open file handles.
+ *
+ * Z90STAT_DOMAIN_INDEX
+ * Return the integer value of the Cryptographic Domain.
+ *
+ * The following ioctls are deprecated and should be no longer used:
+ *
+ * Z90STAT_TOTALCOUNT
+ * Return an integer count of all device types together.
+ *
+ * Z90STAT_PCICACOUNT
+ * Return an integer count of all PCICAs.
+ *
+ * Z90STAT_PCICCCOUNT
+ * Return an integer count of all PCICCs.
+ *
+ * Z90STAT_PCIXCCMCL2COUNT
+ * Return an integer count of all MCL2 PCIXCCs.
+ *
+ * Z90STAT_PCIXCCMCL3COUNT
+ * Return an integer count of all MCL3 PCIXCCs.
+ *
+ * Z90STAT_CEX2CCOUNT
+ * Return an integer count of all CEX2Cs.
+ *
+ * Z90STAT_CEX2ACOUNT
+ * Return an integer count of all CEX2As.
+ *
+ * ICAZ90STATUS
* Return some device driver status in a ica_z90_status struct
* This takes an ica_z90_status struct as its arg.
*
- * NOTE: this ioctl() is deprecated, and has been replaced with
- * single ioctl()s for each type of status being requested
- *
- * Z90STAT_PCIXCCCOUNT (deprecated)
+ * Z90STAT_PCIXCCCOUNT
* Return an integer count of all PCIXCCs (MCL2 + MCL3).
* This is DEPRECATED now that MCL3 PCIXCCs are treated differently from
* MCL2 PCIXCCs.
- *
- * Z90QUIESCE (not recommended)
- * Quiesce the driver. This is intended to stop all new
- * requests from being processed. Its use is NOT recommended,
- * except in circumstances where there is no other way to stop
- * callers from accessing the driver. Its original use was to
- * allow the driver to be "drained" of work in preparation for
- * a system shutdown.
- *
- * NOTE: once issued, this ban on new work cannot be undone
- * except by unloading and reloading the driver.
*/
/**
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index d7e04689304c..ff433126361f 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -60,8 +60,6 @@ header-y += fadvise.h
header-y += fd.h
header-y += fdreg.h
header-y += fib_rules.h
-header-y += ftape-header-segment.h
-header-y += ftape-vendors.h
header-y += fuse.h
header-y += futex.h
header-y += genetlink.h
@@ -206,7 +204,6 @@ unifdef-y += fcntl.h
unifdef-y += filter.h
unifdef-y += flat.h
unifdef-y += fs.h
-unifdef-y += ftape.h
unifdef-y += gameport.h
unifdef-y += generic_serial.h
unifdef-y += genhd.h
@@ -341,6 +338,5 @@ unifdef-y += wait.h
unifdef-y += wanrouter.h
unifdef-y += watchdog.h
unifdef-y += xfrm.h
-unifdef-y += zftape.h
objhdr-y += version.h
diff --git a/include/linux/ftape-header-segment.h b/include/linux/ftape-header-segment.h
deleted file mode 100644
index 4732218f0708..000000000000
--- a/include/linux/ftape-header-segment.h
+++ /dev/null
@@ -1,122 +0,0 @@
-#ifndef _FTAPE_HEADER_SEGMENT_H
-#define _FTAPE_HEADER_SEGMENT_H
-
-/*
- * Copyright (C) 1996-1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/include/linux/ftape-header-segment.h,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:19:28 $
- *
- * This file defines some offsets into the header segment of a
- * floppy tape cartridge. For use with the QIC-40/80/3010/3020
- * floppy-tape driver "ftape" for Linux.
- */
-
-#define FT_SIGNATURE 0 /* must be 0xaa55aa55 */
-#define FT_FMT_CODE 4
-#define FT_REV_LEVEL 5 /* only for QIC-80 since. Rev. L (== 0x0c) */
-#define FT_HSEG_1 6 /* first header segment, except for format code 6 */
-#define FT_HSEG_2 8 /* second header segment, except for format code 6 */
-#define FT_FRST_SEG 10 /* first data segment, except for format code 6 */
-#define FT_LAST_SEG 12 /* last data segment, except for format code 6 */
-#define FT_FMT_DATE 14 /* date and time of most recent format, see below */
-#define FT_WR_DATE 18 /* date and time of most recent write or format */
-#define FT_SPT 24 /* segments per track */
-#define FT_TPC 26 /* tracks per cartridge */
-#define FT_FHM 27 /* floppy drive head (maximum of it) */
-#define FT_FTM 28 /* floppy track max. */
-#define FT_FSM 29 /* floppy sector max. (128) */
-#define FT_LABEL 30 /* floppy tape label */
-#define FT_LABEL_DATE 74 /* date and time the tape label was written */
-#define FT_LABEL_SZ (FT_LABEL_DATE - FT_LABEL)
-#define FT_CMAP_START 78 /* starting segment of compression map */
-#define FT_FMT_ERROR 128 /* must be set to 0xff if remainder gets lost during
- * tape format
- */
-#define FT_SEG_CNT 130 /* number of seg. written, formatted or verified
- * through lifetime of tape (why not read?)
- */
-#define FT_INIT_DATE 138 /* date and time of initial tape format */
-#define FT_FMT_CNT 142 /* number of times tape has been formatted */
-#define FT_FSL_CNT 144 /* number of segments in failed sector log */
-#define FT_MK_CODE 146 /* id string of tape manufacturer */
-#define FT_LOT_CODE 190 /* tape manufacturer lot code */
-#define FT_6_HSEG_1 234 /* first header segment for format code 6 */
-#define FT_6_HSEG_2 238 /* second header segment for format code 6 */
-#define FT_6_FRST_SEG 242 /* first data segment for format code 6 */
-#define FT_6_LAST_SEG 246 /* last data segment for format code 6 */
-
-#define FT_FSL 256
-#define FT_HEADER_END 256 /* space beyond this point:
- * format codes 2, 3 and 5:
- * - failed sector log until byte 2047
- * - bad sector map in the reamining part of segment
- * format codes 4 and 6:
- * - bad sector map starts hear
- */
-
-
-/* value to be stored at the FT_SIGNATURE offset
- */
-#define FT_HSEG_MAGIC 0xaa55aa55
-#define FT_D2G_MAGIC 0x82288228 /* Ditto 2GB */
-
-/* data and time encoding: */
-#define FT_YEAR_SHIFT 25
-#define FT_YEAR_MASK 0xfe000000
-#define FT_YEAR_0 1970
-#define FT_YEAR_MAX 127
-#define FT_YEAR(year) ((((year)-FT_YEAR_0)<<FT_YEAR_SHIFT)&FT_YEAR_MASK)
-
-#define FT_TIME_SHIFT 0
-#define FT_TIME_MASK 0x01FFFFFF
-#define FT_TIME_MAX 0x01ea6dff /* last second of a year */
-#define FT_TIME(mo,d,h,m,s) \
- ((((s)+60*((m)+60*((h)+24*((d)+31*(mo))))) & FT_TIME_MASK))
-
-#define FT_TIME_STAMP(y,mo,d,h,m,s) (FT_YEAR(y) | FT_TIME(mo,d,h,m,s))
-
-/* values for the format code field */
-typedef enum {
- fmt_normal = 2, /* QIC-80 post Rev. B 205Ft or 307Ft tape */
- fmt_1100ft = 3, /* QIC-80 post Rev. B 1100Ft tape */
- fmt_var = 4, /* QIC-80 post Rev. B variabel length format */
- fmt_425ft = 5, /* QIC-80 post Rev. B 425Ft tape */
- fmt_big = 6 /* QIC-3010/3020 variable length tape with more
- * than 2^16 segments per tape
- */
-} ft_format_type;
-
-/* definitions for the failed sector log */
-#define FT_FSL_SIZE (2 * FT_SECTOR_SIZE - FT_HEADER_END)
-#define FT_FSL_MAX_ENTRIES (FT_FSL_SIZE/sizeof(__u32))
-
-typedef struct ft_fsl_entry {
- __u16 segment;
- __u16 date;
-} __attribute__ ((packed)) ft_fsl_entry;
-
-
-/* date encoding for the failed sector log
- * month: 1..12, day: 1..31, year: 1970..2097
- */
-#define FT_FSL_TIME_STAMP(y,m,d) \
- (((((y) - FT_YEAR_0)<<9)&0xfe00) | (((m)<<5)&0x01e0) | ((d)&0x001f))
-
-#endif /* _FTAPE_HEADER_SEGMENT_H */
diff --git a/include/linux/ftape-vendors.h b/include/linux/ftape-vendors.h
deleted file mode 100644
index ec1a81f059e5..000000000000
--- a/include/linux/ftape-vendors.h
+++ /dev/null
@@ -1,137 +0,0 @@
-#ifndef _FTAPE_VENDORS_H
-#define _FTAPE_VENDORS_H
-
-/*
- * Copyright (C) 1993-1996 Bas Laarhoven,
- * (C) 1996-1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/include/linux/ftape-vendors.h,v $
- * $Revision: 1.6 $
- * $Date: 1997/10/09 15:38:11 $
- *
- * This file contains the supported drive types with their
- * QIC-117 spec. vendor code and drive dependent configuration
- * information.
- */
-
-typedef enum {
- unknown_wake_up = 0,
- no_wake_up,
- wake_up_colorado,
- wake_up_mountain,
- wake_up_insight,
-} wake_up_types;
-
-typedef struct {
- wake_up_types wake_up; /* see wake_up_types */
- char *name; /* Text describing the drive */
-} wakeup_method;
-
-/* Note: order of entries in WAKEUP_METHODS must be so that a variable
- * of type wake_up_types can be used as an index in the array.
- */
-#define WAKEUP_METHODS { \
- { unknown_wake_up, "Unknown" }, \
- { no_wake_up, "None" }, \
- { wake_up_colorado, "Colorado" }, \
- { wake_up_mountain, "Mountain" }, \
- { wake_up_insight, "Motor-on" }, \
-}
-
-typedef struct {
- unsigned int vendor_id; /* vendor id from drive */
- int speed; /* maximum tape transport speed (ips) */
- wake_up_types wake_up; /* see wake_up_types */
- char *name; /* Text describing the drive */
-} vendor_struct;
-
-#define UNKNOWN_VENDOR (-1)
-
-#define QIC117_VENDORS { \
-/* see _vendor_struct */ \
- { 0x00000, 82, wake_up_colorado, "Colorado DJ-10 (old)" }, \
- { 0x00047, 90, wake_up_colorado, "Colorado DJ-10/DJ-20" }, \
- { 0x011c2, 84, wake_up_colorado, "Colorado 700" }, \
- { 0x011c3, 90, wake_up_colorado, "Colorado 1400" }, \
- { 0x011c4, 84, wake_up_colorado, "Colorado DJ-10/DJ-20 (new)" }, \
- { 0x011c5, 84, wake_up_colorado, "HP Colorado T1000" }, \
- { 0x011c6, 90, wake_up_colorado, "HP Colorado T3000" }, \
- { 0x00005, 45, wake_up_mountain, "Archive 5580i" }, \
- { 0x10005, 50, wake_up_insight, "Insight 80Mb, Irwin 80SX" }, \
- { 0x00140, 74, wake_up_mountain, "Archive S.Hornet [Identity/Escom]" }, \
- { 0x00146, 72, wake_up_mountain, "Archive 31250Q [Escom]" }, \
- { 0x0014a, 100, wake_up_mountain, "Archive XL9250i [Conner/Escom]" }, \
- { 0x0014c, 98, wake_up_mountain, "Conner C250MQT" }, \
- { 0x0014e, 80, wake_up_mountain, "Conner C250MQ" }, \
- { 0x00150, 80, wake_up_mountain, "Conner TSM420R/TST800R" }, \
- { 0x00152, 80, wake_up_mountain, "Conner TSM850R" }, \
- { 0x00156, 80, wake_up_mountain, "Conner TSM850R/1700R/TST3200R" }, \
- { 0x00180, 0, wake_up_mountain, "Summit SE 150" }, \
- { 0x00181, 85, wake_up_mountain, "Summit SE 250, Mountain FS8000" }, \
- { 0x001c1, 82, no_wake_up, "Wangtek 3040F" }, \
- { 0x001c8, 64, no_wake_up, "Wangtek 3080F" }, \
- { 0x001c8, 64, wake_up_colorado, "Wangtek 3080F" }, \
- { 0x001ca, 67, no_wake_up, "Wangtek 3080F (new)" }, \
- { 0x001cc, 77, wake_up_colorado, "Wangtek 3200 / Teac 700" }, \
- { 0x001cd, 75, wake_up_colorado, "Reveal TB1400" }, \
- { 0x00380, 85, wake_up_colorado, "Exabyte Eagle-96" }, \
- { 0x00381, 85, wake_up_colorado, "Exabyte Eagle TR-3" }, \
- { 0x00382, 85, wake_up_colorado, "Exabyte Eagle TR-3" }, \
- { 0x003ce, 77, wake_up_colorado, "Teac 800" }, \
- { 0x003cf, 0, wake_up_colorado, "Teac FT3010TR" }, \
- { 0x08880, 64, no_wake_up, "Iomega 250, Ditto 800" }, \
- { 0x08880, 64, wake_up_colorado, "Iomega 250, Ditto 800" }, \
- { 0x08880, 64, wake_up_insight, "Iomega 250, Ditto 800" }, \
- { 0x08881, 80, wake_up_colorado, "Iomega 700" }, \
- { 0x08882, 80, wake_up_colorado, "Iomega 3200" }, \
- { 0x08883, 80, wake_up_colorado, "Iomega DITTO 2GB" }, \
- { 0x00021, 70, no_wake_up, "AIWA CT-803" }, \
- { 0x004c0, 80, no_wake_up, "AIWA TD-S1600" }, \
- { 0x00021, 0, wake_up_mountain, "COREtape QIC80" }, \
- { 0x00441, 0, wake_up_mountain, "ComByte DoublePlay" }, \
- { 0x00481, 127, wake_up_mountain, "PERTEC MyTape 800" }, \
- { 0x00483, 130, wake_up_mountain, "PERTEC MyTape 3200" }, \
- { UNKNOWN_VENDOR, 0, no_wake_up, "unknown" } \
-}
-
-#define QIC117_MAKE_CODES { \
- { 0, "Unassigned" }, \
- { 1, "Alloy Computer Products" }, \
- { 2, "3M" }, \
- { 3, "Tandberg Data" }, \
- { 4, "Colorado" }, \
- { 5, "Archive/Conner" }, \
- { 6, "Mountain/Summit Memory Systems" }, \
- { 7, "Wangtek/Rexon/Tecmar" }, \
- { 8, "Sony" }, \
- { 9, "Cipher Data Products" }, \
- { 10, "Irwin Magnetic Systems" }, \
- { 11, "Braemar" }, \
- { 12, "Verbatim" }, \
- { 13, "Core International" }, \
- { 14, "Exabyte" }, \
- { 15, "Teac" }, \
- { 16, "Gigatek" }, \
- { 17, "ComByte" }, \
- { 18, "PERTEC Memories" }, \
- { 19, "Aiwa" }, \
- { 71, "Colorado" }, \
- { 546, "Iomega Inc" }, \
-}
-
-#endif /* _FTAPE_VENDORS_H */
diff --git a/include/linux/ftape.h b/include/linux/ftape.h
deleted file mode 100644
index 7e7038cba86a..000000000000
--- a/include/linux/ftape.h
+++ /dev/null
@@ -1,201 +0,0 @@
-#ifndef _FTAPE_H
-#define _FTAPE_H
-
-/*
- * Copyright (C) 1994-1996 Bas Laarhoven,
- * (C) 1996-1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/include/linux/ftape.h,v $
- * $Revision: 1.17.6.4 $
- * $Date: 1997/11/25 01:52:54 $
- *
- * This file contains global definitions, typedefs and macro's
- * for the QIC-40/80/3010/3020 floppy-tape driver for Linux.
- */
-
-#define FTAPE_VERSION "ftape v3.04d 25/11/97"
-
-#ifdef __KERNEL__
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#endif
-#include <linux/types.h>
-#include <linux/mtio.h>
-
-#define FT_SECTOR(x) (x+1) /* sector offset into real sector */
-#define FT_SECTOR_SIZE 1024
-#define FT_SECTORS_PER_SEGMENT 32
-#define FT_ECC_SECTORS 3
-#define FT_SEGMENT_SIZE ((FT_SECTORS_PER_SEGMENT - FT_ECC_SECTORS) * FT_SECTOR_SIZE)
-#define FT_BUFF_SIZE (FT_SECTORS_PER_SEGMENT * FT_SECTOR_SIZE)
-
-/*
- * bits of the minor device number that define drive selection
- * methods. Could be used one day to access multiple tape
- * drives on the same controller.
- */
-#define FTAPE_SEL_A 0
-#define FTAPE_SEL_B 1
-#define FTAPE_SEL_C 2
-#define FTAPE_SEL_D 3
-#define FTAPE_SEL_MASK 3
-#define FTAPE_SEL(unit) ((unit) & FTAPE_SEL_MASK)
-#define FTAPE_NO_REWIND 4 /* mask for minor nr */
-
-/* the following two may be reported when MTIOCGET is requested ... */
-typedef union {
- struct {
- __u8 error;
- __u8 command;
- } error;
- long space;
-} ft_drive_error;
-typedef union {
- struct {
- __u8 drive_status;
- __u8 drive_config;
- __u8 tape_status;
- } status;
- long space;
-} ft_drive_status;
-
-#ifdef __KERNEL__
-
-#define FT_RQM_DELAY 12
-#define FT_MILLISECOND 1
-#define FT_SECOND 1000
-#define FT_FOREVER -1
-#ifndef HZ
-#error "HZ undefined."
-#endif
-#define FT_USPT (1000000/HZ) /* microseconds per tick */
-
-/* This defines the number of retries that the driver will allow
- * before giving up (and letting a higher level handle the error).
- */
-#ifdef TESTING
-#define FT_SOFT_RETRIES 1 /* number of low level retries */
-#define FT_RETRIES_ON_ECC_ERROR 3 /* ecc error when correcting segment */
-#else
-#define FT_SOFT_RETRIES 6 /* number of low level retries (triple) */
-#define FT_RETRIES_ON_ECC_ERROR 3 /* ecc error when correcting segment */
-#endif
-
-#ifndef THE_FTAPE_MAINTAINER
-#define THE_FTAPE_MAINTAINER "the ftape maintainer"
-#endif
-
-/* Initialize missing configuration parameters.
- */
-#ifndef CONFIG_FT_NR_BUFFERS
-# define CONFIG_FT_NR_BUFFERS 3
-#endif
-#ifndef CONFIG_FT_FDC_THR
-# define CONFIG_FT_FDC_THR 8
-#endif
-#ifndef CONFIG_FT_FDC_MAX_RATE
-# define CONFIG_FT_FDC_MAX_RATE 2000
-#endif
-#ifndef CONFIG_FT_FDC_BASE
-# define CONFIG_FT_FDC_BASE 0
-#endif
-#ifndef CONFIG_FT_FDC_IRQ
-# define CONFIG_FT_FDC_IRQ 0
-#endif
-#ifndef CONFIG_FT_FDC_DMA
-# define CONFIG_FT_FDC_DMA 0
-#endif
-
-/* Turn some booleans into numbers.
- */
-#ifdef CONFIG_FT_PROBE_FC10
-# undef CONFIG_FT_PROBE_FC10
-# define CONFIG_FT_PROBE_FC10 1
-#else
-# define CONFIG_FT_PROBE_FC10 0
-#endif
-#ifdef CONFIG_FT_MACH2
-# undef CONFIG_FT_MACH2
-# define CONFIG_FT_MACH2 1
-#else
-# define CONFIG_FT_MACH2 0
-#endif
-
-/* Insert default settings
- */
-#if CONFIG_FT_PROBE_FC10 == 1
-# if CONFIG_FT_FDC_BASE == 0
-# undef CONFIG_FT_FDC_BASE
-# define CONFIG_FT_FDC_BASE 0x180
-# endif
-# if CONFIG_FT_FDC_IRQ == 0
-# undef CONFIG_FT_FDC_IRQ
-# define CONFIG_FT_FDC_IRQ 9
-# endif
-# if CONFIG_FT_FDC_DMA == 0
-# undef CONFIG_FT_FDC_DMA
-# define CONFIG_FT_FDC_DMA 3
-# endif
-#elif CONFIG_FT_MACH2 == 1 /* CONFIG_FT_PROBE_FC10 == 1 */
-# if CONFIG_FT_FDC_BASE == 0
-# undef CONFIG_FT_FDC_BASE
-# define CONFIG_FT_FDC_BASE 0x1E0
-# endif
-# if CONFIG_FT_FDC_IRQ == 0
-# undef CONFIG_FT_FDC_IRQ
-# define CONFIG_FT_FDC_IRQ 6
-# endif
-# if CONFIG_FT_FDC_DMA == 0
-# undef CONFIG_FT_FDC_DMA
-# define CONFIG_FT_FDC_DMA 2
-# endif
-#elif defined(CONFIG_FT_ALT_FDC) /* CONFIG_FT_MACH2 */
-# if CONFIG_FT_FDC_BASE == 0
-# undef CONFIG_FT_FDC_BASE
-# define CONFIG_FT_FDC_BASE 0x370
-# endif
-# if CONFIG_FT_FDC_IRQ == 0
-# undef CONFIG_FT_FDC_IRQ
-# define CONFIG_FT_FDC_IRQ 6
-# endif
-# if CONFIG_FT_FDC_DMA == 0
-# undef CONFIG_FT_FDC_DMA
-# define CONFIG_FT_FDC_DMA 2
-# endif
-#else /* CONFIG_FT_ALT_FDC */
-# if CONFIG_FT_FDC_BASE == 0
-# undef CONFIG_FT_FDC_BASE
-# define CONFIG_FT_FDC_BASE 0x3f0
-# endif
-# if CONFIG_FT_FDC_IRQ == 0
-# undef CONFIG_FT_FDC_IRQ
-# define CONFIG_FT_FDC_IRQ 6
-# endif
-# if CONFIG_FT_FDC_DMA == 0
-# undef CONFIG_FT_FDC_DMA
-# define CONFIG_FT_FDC_DMA 2
-# endif
-#endif /* standard FDC */
-
-/* some useful macro's
- */
-#define NR_ITEMS(x) (int)(sizeof(x)/ sizeof(*x))
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/include/linux/zftape.h b/include/linux/zftape.h
deleted file mode 100644
index b057c65366c6..000000000000
--- a/include/linux/zftape.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef _ZFTAPE_H
-#define _ZFTAPE_H
-
-/*
- * Copyright (C) 1996, 1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/include/linux/zftape.h,v $
- * $Revision: 1.12 $
- * $Date: 1997/10/21 11:02:37 $
- *
- * Special ioctl and other global info for the zftape VFS
- * interface for the QIC-40/80/3010/3020 floppy-tape driver for
- * Linux.
- */
-
-#define ZFTAPE_VERSION "zftape for " FTAPE_VERSION
-
-#include <linux/ftape.h>
-
-#define ZFTAPE_LABEL "Ftape - The Linux Floppy Tape Project!"
-
-/* Bits of the minor device number that control the operation mode */
-#define ZFT_Q80_MODE (1 << 3)
-#define ZFT_ZIP_MODE (1 << 4)
-#define ZFT_RAW_MODE (1 << 5)
-#define ZFT_MINOR_OP_MASK (ZFT_Q80_MODE | \
- ZFT_ZIP_MODE | \
- ZFT_RAW_MODE)
-#define ZFT_MINOR_MASK (FTAPE_SEL_MASK | \
- ZFT_MINOR_OP_MASK | \
- FTAPE_NO_REWIND)
-
-#ifdef ZFT_OBSOLETE
-struct mtblksz {
- unsigned int mt_blksz;
-};
-#define MTIOC_ZFTAPE_GETBLKSZ _IOR('m', 104, struct mtblksz)
-#endif
-
-#ifdef __KERNEL__
-
-extern int zft_init(void);
-
-static inline __s64 zft_div_blksz(__s64 value, __u32 blk_sz)
-{
- if (blk_sz == 1) {
- return value;
- } else {
- return (__s64)(((__u32)(value >> 10) + (blk_sz >> 10) - 1)
- / (blk_sz >> 10));
- }
-}
-
-static inline __s64 zft_mul_blksz(__s64 value, __u32 blk_sz)
-{
- if (blk_sz == 1) {
- return value;
- } else {
- /* if blk_sz != 1, then it is a multiple of 1024. In
- * this case, `value' will also fit into 32 bits.
- *
- * Actually, this limits the capacity to 42
- * bits. This is (2^32)*1024, roughly a thousand
- * times 2GB, or 3 Terabytes. Hopefully this is enough
- */
- return(__s64)(((__u32)(value)*(blk_sz>>10))<<10);
- }
-}
-
-#endif
-
-#endif