diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-mips/mach-cobalt/cobalt.h | 26 |
1 files changed, 2 insertions, 24 deletions
diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h index 408eeccbe512..f27fcef3e3ff 100644 --- a/include/asm-mips/mach-cobalt/cobalt.h +++ b/include/asm-mips/mach-cobalt/cobalt.h @@ -13,37 +13,15 @@ #define __ASM_COBALT_H /* - * PCI configuration space manifest constants. These are wired into - * the board layout according to the PCI spec to enable the software - * to probe the hardware configuration space in a well defined manner. - * - * The PCI_DEVSHFT() macro transforms these values into numbers - * suitable for passing as the dev parameter to the various - * pcibios_read/write_config routines. + * The Cobalt board ID information. */ -#define COBALT_PCICONF_CPU 0x06 -#define COBALT_PCICONF_ETH0 0x07 -#define COBALT_PCICONF_RAQSCSI 0x08 -#define COBALT_PCICONF_VIA 0x09 -#define COBALT_PCICONF_PCISLOT 0x0A -#define COBALT_PCICONF_ETH1 0x0C - +extern int cobalt_board_id; -/* - * The Cobalt board id information. The boards have an ID number wired - * into the VIA that is available in the high nibble of register 94. - * This register is available in the VIA configuration space through the - * interface routines qube_pcibios_read/write_config. See cobalt/pci.c - */ -#define VIA_COBALT_BRD_ID_REG 0x94 -#define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char) (reg) >> 4) #define COBALT_BRD_ID_QUBE1 0x3 #define COBALT_BRD_ID_RAQ1 0x4 #define COBALT_BRD_ID_QUBE2 0x5 #define COBALT_BRD_ID_RAQ2 0x6 -extern int cobalt_board_id; - #define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000)) # define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */ # define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */ |