summaryrefslogtreecommitdiff
path: root/net/atm/br2684.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/atm/br2684.c')
-rw-r--r--net/atm/br2684.c121
1 files changed, 0 insertions, 121 deletions
diff --git a/net/atm/br2684.c b/net/atm/br2684.c
index c742d37bfb97..ba6428f204f9 100644
--- a/net/atm/br2684.c
+++ b/net/atm/br2684.c
@@ -24,16 +24,6 @@ Author: Marcell GAL, 2000, XDSL Ltd, Hungary
#include "common.h"
-/*
- * Define this to use a version of the code which interacts with the higher
- * layers in a more intellegent way, by always reserving enough space for
- * our header at the begining of the packet. However, there may still be
- * some problems with programs like tcpdump. In 2.5 we'll sort out what
- * we need to do to get this perfect. For now we just will copy the packet
- * if we need space for the header
- */
-/* #define FASTER_VERSION */
-
#ifdef SKB_DEBUG
static void skb_debug(const struct sk_buff *skb)
{
@@ -69,9 +59,7 @@ struct br2684_vcc {
#ifdef CONFIG_ATM_BR2684_IPFILTER
struct br2684_filter filter;
#endif /* CONFIG_ATM_BR2684_IPFILTER */
-#ifndef FASTER_VERSION
unsigned copies_needed, copies_failed;
-#endif /* FASTER_VERSION */
};
struct br2684_dev {
@@ -147,13 +135,6 @@ static int br2684_xmit_vcc(struct sk_buff *skb, struct br2684_dev *brdev,
struct br2684_vcc *brvcc)
{
struct atm_vcc *atmvcc;
-#ifdef FASTER_VERSION
- if (brvcc->encaps == e_llc)
- memcpy(skb_push(skb, 8), llc_oui_pid_pad, 8);
- /* last 2 bytes of llc_oui_pid_pad are managed by header routines;
- yes, you got it: 8 + 2 = sizeof(llc_oui_pid_pad)
- */
-#else
int minheadroom = (brvcc->encaps == e_llc) ? 10 : 2;
if (skb_headroom(skb) < minheadroom) {
struct sk_buff *skb2 = skb_realloc_headroom(skb, minheadroom);
@@ -170,7 +151,6 @@ static int br2684_xmit_vcc(struct sk_buff *skb, struct br2684_dev *brdev,
skb_copy_to_linear_data(skb, llc_oui_pid_pad, 10);
else
memset(skb->data, 0, 2);
-#endif /* FASTER_VERSION */
skb_debug(skb);
ATM_SKB(skb)->vcc = atmvcc = brvcc->atmvcc;
@@ -237,87 +217,6 @@ static struct net_device_stats *br2684_get_stats(struct net_device *dev)
return &BRPRIV(dev)->stats;
}
-#ifdef FASTER_VERSION
-/*
- * These mirror eth_header and eth_header_cache. They are not usually
- * exported for use in modules, so we grab them from net_device
- * after ether_setup() is done with it. Bit of a hack.
- */
-static int (*my_eth_header)(struct sk_buff *, struct net_device *,
- unsigned short, void *, void *, unsigned);
-static int (*my_eth_header_cache)(struct neighbour *, struct hh_cache *);
-
-static int
-br2684_header(struct sk_buff *skb, struct net_device *dev,
- unsigned short type, void *daddr, void *saddr, unsigned len)
-{
- u16 *pad_before_eth;
- int t = my_eth_header(skb, dev, type, daddr, saddr, len);
- if (t > 0) {
- pad_before_eth = (u16 *) skb_push(skb, 2);
- *pad_before_eth = 0;
- return dev->hard_header_len; /* or return 16; ? */
- } else
- return t;
-}
-
-static int
-br2684_header_cache(struct neighbour *neigh, struct hh_cache *hh)
-{
-/* hh_data is 16 bytes long. if encaps is ether-llc we need 24, so
-xmit will add the additional header part in that case */
- u16 *pad_before_eth = (u16 *)(hh->hh_data);
- int t = my_eth_header_cache(neigh, hh);
- DPRINTK("br2684_header_cache, neigh=%p, hh_cache=%p\n", neigh, hh);
- if (t < 0)
- return t;
- else {
- *pad_before_eth = 0;
- hh->hh_len = PADLEN + ETH_HLEN;
- }
- return 0;
-}
-
-/*
- * This is similar to eth_type_trans, which cannot be used because of
- * our dev->hard_header_len
- */
-static inline __be16 br_type_trans(struct sk_buff *skb, struct net_device *dev)
-{
- struct ethhdr *eth;
- unsigned char *rawp;
- eth = eth_hdr(skb);
-
- if (is_multicast_ether_addr(eth->h_dest)) {
- if (!compare_ether_addr(eth->h_dest, dev->broadcast))
- skb->pkt_type = PACKET_BROADCAST;
- else
- skb->pkt_type = PACKET_MULTICAST;
- }
-
- else if (compare_ether_addr(eth->h_dest, dev->dev_addr))
- skb->pkt_type = PACKET_OTHERHOST;
-
- if (ntohs(eth->h_proto) >= 1536)
- return eth->h_proto;
-
- rawp = skb->data;
-
- /*
- * This is a magic hack to spot IPX packets. Older Novell breaks
- * the protocol design and runs IPX over 802.3 without an 802.2 LLC
- * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
- * won't work for fault tolerant netware but does for the rest.
- */
- if (*(unsigned short *) rawp == 0xFFFF)
- return htons(ETH_P_802_3);
-
- /*
- * Real 802.2 LLC
- */
- return htons(ETH_P_802_2);
-}
-#endif /* FASTER_VERSION */
/*
* We remember when the MAC gets set, so we don't override it later with
@@ -448,17 +347,8 @@ static void br2684_push(struct atm_vcc *atmvcc, struct sk_buff *skb)
return;
}
-#ifdef FASTER_VERSION
- /* FIXME: tcpdump shows that pointer to mac header is 2 bytes earlier,
- than should be. What else should I set? */
- skb_pull(skb, plen);
- skb_set_mac_header(skb, -ETH_HLEN);
- skb->pkt_type = PACKET_HOST;
- skb->protocol = br_type_trans(skb, net_dev);
-#else
skb_pull(skb, plen - ETH_HLEN);
skb->protocol = eth_type_trans(skb, net_dev);
-#endif /* FASTER_VERSION */
#ifdef CONFIG_ATM_BR2684_IPFILTER
if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb))) {
brdev->stats.rx_dropped++;
@@ -584,13 +474,6 @@ static void br2684_setup(struct net_device *netdev)
ether_setup(netdev);
brdev->net_dev = netdev;
-#ifdef FASTER_VERSION
- my_eth_header = netdev->hard_header;
- netdev->hard_header = br2684_header;
- my_eth_header_cache = netdev->hard_header_cache;
- netdev->hard_header_cache = br2684_header_cache;
- netdev->hard_header_len = sizeof(llc_oui_pid_pad) + ETH_HLEN; /* 10 + 14 */
-#endif
my_eth_mac_addr = netdev->set_mac_address;
netdev->set_mac_address = br2684_mac_addr;
netdev->hard_start_xmit = br2684_start_xmit;
@@ -719,16 +602,12 @@ static int br2684_seq_show(struct seq_file *seq, void *v)
list_for_each_entry(brvcc, &brdev->brvccs, brvccs) {
seq_printf(seq, " vcc %d.%d.%d: encaps=%s"
-#ifndef FASTER_VERSION
", failed copies %u/%u"
-#endif /* FASTER_VERSION */
"\n", brvcc->atmvcc->dev->number,
brvcc->atmvcc->vpi, brvcc->atmvcc->vci,
(brvcc->encaps == e_llc) ? "LLC" : "VC"
-#ifndef FASTER_VERSION
, brvcc->copies_failed
, brvcc->copies_needed
-#endif /* FASTER_VERSION */
);
#ifdef CONFIG_ATM_BR2684_IPFILTER
#define b1(var, byte) ((u8 *) &brvcc->filter.var)[byte]