diff options
Diffstat (limited to 'net/ipv4/netfilter/Kconfig')
-rw-r--r-- | net/ipv4/netfilter/Kconfig | 138 |
1 files changed, 98 insertions, 40 deletions
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig index d88c292f118c..363df9976c9d 100644 --- a/net/ipv4/netfilter/Kconfig +++ b/net/ipv4/netfilter/Kconfig @@ -6,7 +6,7 @@ menu "IP: Netfilter Configuration" depends on INET && NETFILTER config NF_CONNTRACK_IPV4 - tristate "IPv4 support for new connection tracking (EXPERIMENTAL)" + tristate "IPv4 connection tracking support (required for NAT) (EXPERIMENTAL)" depends on EXPERIMENTAL && NF_CONNTRACK ---help--- Connection tracking keeps a record of what packets have passed @@ -19,21 +19,18 @@ config NF_CONNTRACK_IPV4 To compile it as a module, choose M here. If unsure, say N. -# connection tracking, helpers and protocols -config IP_NF_CONNTRACK - tristate "Connection tracking (required for masq/NAT)" - ---help--- - Connection tracking keeps a record of what packets have passed - through your machine, in order to figure out how they are related - into connections. - - This is required to do Masquerading or other kinds of Network - Address Translation (except for Fast NAT). It can also be used to - enhance packet filtering (see `Connection state match support' - below). +config NF_CONNTRACK_PROC_COMPAT + bool "proc/sysctl compatibility with old connection tracking" + depends on NF_CONNTRACK_IPV4 + default y + help + This option enables /proc and sysctl compatibility with the old + layer 3 dependant connection tracking. This is needed to keep + old programs that have not been adapted to the new names working. - To compile it as a module, choose M here. If unsure, say N. + If unsure, say Y. +# connection tracking, helpers and protocols config IP_NF_CT_ACCT bool "Connection tracking flow accounting" depends on IP_NF_CONNTRACK @@ -315,20 +312,6 @@ config IP_NF_MATCH_ADDRTYPE If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. If unsure, say `N'. -config IP_NF_MATCH_HASHLIMIT - tristate 'hashlimit match support' - depends on IP_NF_IPTABLES - help - This option adds a new iptables `hashlimit' match. - - As opposed to `limit', this match dynamically creates a hash table - of limit buckets, based on your selection of source/destination - ip addresses and/or ports. - - It enables you to express policies like `10kpps for any given - destination IP' or `500pps from any given source IP' with a single - IPtables rule. - # `filter', generic and specific targets config IP_NF_FILTER tristate "Packet filtering" @@ -404,7 +387,7 @@ config IP_NF_TARGET_TCPMSS To compile it as a module, choose M here. If unsure, say N. -# NAT + specific targets +# NAT + specific targets: ip_conntrack config IP_NF_NAT tristate "Full NAT" depends on IP_NF_IPTABLES && IP_NF_CONNTRACK @@ -415,14 +398,30 @@ config IP_NF_NAT To compile it as a module, choose M here. If unsure, say N. +# NAT + specific targets: nf_conntrack +config NF_NAT + tristate "Full NAT" + depends on IP_NF_IPTABLES && NF_CONNTRACK + help + The Full NAT option allows masquerading, port forwarding and other + forms of full Network Address Port Translation. It is controlled by + the `nat' table in iptables: see the man page for iptables(8). + + To compile it as a module, choose M here. If unsure, say N. + config IP_NF_NAT_NEEDED bool - depends on IP_NF_NAT != n + depends on IP_NF_NAT + default y + +config NF_NAT_NEEDED + bool + depends on NF_NAT default y config IP_NF_TARGET_MASQUERADE tristate "MASQUERADE target support" - depends on IP_NF_NAT + depends on (NF_NAT || IP_NF_NAT) help Masquerading is a special case of NAT: all outgoing connections are changed to seem to come from a particular interface's address, and @@ -434,7 +433,7 @@ config IP_NF_TARGET_MASQUERADE config IP_NF_TARGET_REDIRECT tristate "REDIRECT target support" - depends on IP_NF_NAT + depends on (NF_NAT || IP_NF_NAT) help REDIRECT is a special case of NAT: all incoming connections are mapped onto the incoming interface's address, causing the packets to @@ -445,7 +444,7 @@ config IP_NF_TARGET_REDIRECT config IP_NF_TARGET_NETMAP tristate "NETMAP target support" - depends on IP_NF_NAT + depends on (NF_NAT || IP_NF_NAT) help NETMAP is an implementation of static 1:1 NAT mapping of network addresses. It maps the network address part, while keeping the host @@ -456,7 +455,7 @@ config IP_NF_TARGET_NETMAP config IP_NF_TARGET_SAME tristate "SAME target support" - depends on IP_NF_NAT + depends on (NF_NAT || IP_NF_NAT) help This option adds a `SAME' target, which works like the standard SNAT target, but attempts to give clients the same IP for all connections. @@ -478,19 +477,52 @@ config IP_NF_NAT_SNMP_BASIC To compile it as a module, choose M here. If unsure, say N. +config NF_NAT_SNMP_BASIC + tristate "Basic SNMP-ALG support (EXPERIMENTAL)" + depends on EXPERIMENTAL && NF_NAT + ---help--- + + This module implements an Application Layer Gateway (ALG) for + SNMP payloads. In conjunction with NAT, it allows a network + management system to access multiple private networks with + conflicting addresses. It works by modifying IP addresses + inside SNMP payloads to match IP-layer NAT mapping. + + This is the "basic" form of SNMP-ALG, as described in RFC 2962 + + To compile it as a module, choose M here. If unsure, say N. + +# If they want FTP, set to $CONFIG_IP_NF_NAT (m or y), +# or $CONFIG_IP_NF_FTP (m or y), whichever is weaker. +# From kconfig-language.txt: +# +# <expr> '&&' <expr> (6) +# +# (6) Returns the result of min(/expr/, /expr/). +config NF_NAT_PROTO_GRE + tristate + depends on NF_NAT && NF_CT_PROTO_GRE + +config IP_NF_NAT_FTP + tristate + depends on IP_NF_IPTABLES && IP_NF_CONNTRACK && IP_NF_NAT + default IP_NF_NAT && IP_NF_FTP + +config NF_NAT_FTP + tristate + depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT + default NF_NAT && NF_CONNTRACK_FTP + config IP_NF_NAT_IRC tristate depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n default IP_NF_NAT if IP_NF_IRC=y default m if IP_NF_IRC=m -# If they want FTP, set to $CONFIG_IP_NF_NAT (m or y), -# or $CONFIG_IP_NF_FTP (m or y), whichever is weaker. Argh. -config IP_NF_NAT_FTP +config NF_NAT_IRC tristate - depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n - default IP_NF_NAT if IP_NF_FTP=y - default m if IP_NF_FTP=m + depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT + default NF_NAT && NF_CONNTRACK_IRC config IP_NF_NAT_TFTP tristate @@ -498,30 +530,56 @@ config IP_NF_NAT_TFTP default IP_NF_NAT if IP_NF_TFTP=y default m if IP_NF_TFTP=m +config NF_NAT_TFTP + tristate + depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT + default NF_NAT && NF_CONNTRACK_TFTP + config IP_NF_NAT_AMANDA tristate depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n default IP_NF_NAT if IP_NF_AMANDA=y default m if IP_NF_AMANDA=m +config NF_NAT_AMANDA + tristate + depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT + default NF_NAT && NF_CONNTRACK_AMANDA + config IP_NF_NAT_PPTP tristate depends on IP_NF_NAT!=n && IP_NF_PPTP!=n default IP_NF_NAT if IP_NF_PPTP=y default m if IP_NF_PPTP=m +config NF_NAT_PPTP + tristate + depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT + default NF_NAT && NF_CONNTRACK_PPTP + select NF_NAT_PROTO_GRE + config IP_NF_NAT_H323 tristate depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n default IP_NF_NAT if IP_NF_H323=y default m if IP_NF_H323=m +config NF_NAT_H323 + tristate + depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT + default NF_NAT && NF_CONNTRACK_H323 + config IP_NF_NAT_SIP tristate depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n default IP_NF_NAT if IP_NF_SIP=y default m if IP_NF_SIP=m +config NF_NAT_SIP + tristate + depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT + default NF_NAT && NF_CONNTRACK_SIP + # mangle + specific targets config IP_NF_MANGLE tristate "Packet mangling" |