summaryrefslogtreecommitdiff
path: root/net/irda/ircomm/ircomm_tty_ioctl.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/irda/ircomm/ircomm_tty_ioctl.c')
-rw-r--r--net/irda/ircomm/ircomm_tty_ioctl.c33
1 files changed, 17 insertions, 16 deletions
diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c
index d0667d68351d..b343f50dc8d7 100644
--- a/net/irda/ircomm/ircomm_tty_ioctl.c
+++ b/net/irda/ircomm/ircomm_tty_ioctl.c
@@ -52,17 +52,18 @@
* Change speed of the driver. If the remote device is a DCE, then this
* should make it change the speed of its serial port
*/
-static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
+static void ircomm_tty_change_speed(struct ircomm_tty_cb *self,
+ struct tty_struct *tty)
{
unsigned int cflag, cval;
int baud;
IRDA_DEBUG(2, "%s()\n", __func__ );
- if (!self->tty || !self->tty->termios || !self->ircomm)
+ if (!self->ircomm)
return;
- cflag = self->tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/* byte size and parity */
switch (cflag & CSIZE) {
@@ -81,7 +82,7 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
cval |= IRCOMM_PARITY_EVEN;
/* Determine divisor based on baud rate */
- baud = tty_get_baud_rate(self->tty);
+ baud = tty_get_baud_rate(tty);
if (!baud)
baud = 9600; /* B0 transition handled in rs_set_termios */
@@ -90,19 +91,19 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
/* CTS flow control flag and modem status interrupts */
if (cflag & CRTSCTS) {
- self->flags |= ASYNC_CTS_FLOW;
+ self->port.flags |= ASYNC_CTS_FLOW;
self->settings.flow_control |= IRCOMM_RTS_CTS_IN;
/* This got me. Bummer. Jean II */
if (self->service_type == IRCOMM_3_WIRE_RAW)
IRDA_WARNING("%s(), enabling RTS/CTS on link that doesn't support it (3-wire-raw)\n", __func__);
} else {
- self->flags &= ~ASYNC_CTS_FLOW;
+ self->port.flags &= ~ASYNC_CTS_FLOW;
self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN;
}
if (cflag & CLOCAL)
- self->flags &= ~ASYNC_CHECK_CD;
+ self->port.flags &= ~ASYNC_CHECK_CD;
else
- self->flags |= ASYNC_CHECK_CD;
+ self->port.flags |= ASYNC_CHECK_CD;
#if 0
/*
* Set up parity check flag
@@ -148,18 +149,18 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
IRDA_DEBUG(2, "%s()\n", __func__ );
if ((cflag == old_termios->c_cflag) &&
- (RELEVANT_IFLAG(tty->termios->c_iflag) ==
+ (RELEVANT_IFLAG(tty->termios.c_iflag) ==
RELEVANT_IFLAG(old_termios->c_iflag)))
{
return;
}
- ircomm_tty_change_speed(self);
+ ircomm_tty_change_speed(self, tty);
/* Handle transition to B0 status */
if ((old_termios->c_cflag & CBAUD) &&
@@ -172,7 +173,7 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
if (!(old_termios->c_cflag & CBAUD) &&
(cflag & CBAUD)) {
self->settings.dte |= IRCOMM_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
self->settings.dte |= IRCOMM_RTS;
}
@@ -181,7 +182,7 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS))
+ !(tty->termios.c_cflag & CRTSCTS))
{
tty->hw_stopped = 0;
ircomm_tty_start(tty);
@@ -270,10 +271,10 @@ static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self,
memset(&info, 0, sizeof(info));
info.line = self->line;
- info.flags = self->flags;
+ info.flags = self->port.flags;
info.baud_base = self->settings.data_rate;
- info.close_delay = self->close_delay;
- info.closing_wait = self->closing_wait;
+ info.close_delay = self->port.close_delay;
+ info.closing_wait = self->port.closing_wait;
/* For compatibility */
info.type = PORT_16550A;