diff options
Diffstat (limited to 'net/mac80211/cfg.c')
-rw-r--r-- | net/mac80211/cfg.c | 194 |
1 files changed, 174 insertions, 20 deletions
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 855126a3039d..9d4e4d846ec1 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -17,13 +17,6 @@ #include "rate.h" #include "mesh.h" -struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy) -{ - struct ieee80211_local *local = wiphy_priv(wiphy); - return &local->hw; -} -EXPORT_SYMBOL(wiphy_to_hw); - static bool nl80211_type_check(enum nl80211_iftype type) { switch (type) { @@ -33,6 +26,8 @@ static bool nl80211_type_check(enum nl80211_iftype type) #ifdef CONFIG_MAC80211_MESH case NL80211_IFTYPE_MESH_POINT: #endif + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_AP_VLAN: case NL80211_IFTYPE_WDS: return true; default: @@ -315,12 +310,35 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) sinfo->filled = STATION_INFO_INACTIVE_TIME | STATION_INFO_RX_BYTES | - STATION_INFO_TX_BYTES; + STATION_INFO_TX_BYTES | + STATION_INFO_TX_BITRATE; sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx); sinfo->rx_bytes = sta->rx_bytes; sinfo->tx_bytes = sta->tx_bytes; + if (sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) { + sinfo->filled |= STATION_INFO_SIGNAL; + sinfo->signal = (s8)sta->last_signal; + } + + sinfo->txrate.flags = 0; + if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS) + sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS; + if (sta->last_tx_rate.flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; + if (sta->last_tx_rate.flags & IEEE80211_TX_RC_SHORT_GI) + sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI; + + if (!(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)) { + struct ieee80211_supported_band *sband; + sband = sta->local->hw.wiphy->bands[ + sta->local->hw.conf.channel->band]; + sinfo->txrate.legacy = + sband->bitrates[sta->last_tx_rate.idx].bitrate; + } else + sinfo->txrate.mcs = sta->last_tx_rate.idx; + if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH sinfo->filled |= STATION_INFO_LLID | @@ -401,8 +419,10 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata, */ if (params->interval) { sdata->local->hw.conf.beacon_int = params->interval; - if (ieee80211_hw_config(sdata->local)) - return -EINVAL; + err = ieee80211_hw_config(sdata->local, + IEEE80211_CONF_CHANGE_BEACON_INTERVAL); + if (err < 0) + return err; /* * We updated some parameter so if below bails out * it's not an error. @@ -589,6 +609,8 @@ static void sta_apply_parameters(struct ieee80211_local *local, struct ieee80211_supported_band *sband; struct ieee80211_sub_if_data *sdata = sta->sdata; + sband = local->hw.wiphy->bands[local->oper_channel->band]; + /* * FIXME: updating the flags is racy when this function is * called from ieee80211_change_station(), this will @@ -629,7 +651,6 @@ static void sta_apply_parameters(struct ieee80211_local *local, if (params->supported_rates) { rates = 0; - sband = local->hw.wiphy->bands[local->oper_channel->band]; for (i = 0; i < params->supported_rates_len; i++) { int rate = (params->supported_rates[i] & 0x7f) * 5; @@ -641,10 +662,10 @@ static void sta_apply_parameters(struct ieee80211_local *local, sta->sta.supp_rates[local->oper_channel->band] = rates; } - if (params->ht_capa) { - ieee80211_ht_cap_ie_to_ht_info(params->ht_capa, - &sta->sta.ht_info); - } + if (params->ht_capa) + ieee80211_ht_cap_ie_to_sta_ht_cap(sband, + params->ht_capa, + &sta->sta.ht_cap); if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) { switch (params->plink_action) { @@ -665,6 +686,7 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, struct sta_info *sta; struct ieee80211_sub_if_data *sdata; int err; + int layer2_update; /* Prevent a race with changing the rate control algorithm */ if (!netif_running(dev)) @@ -695,17 +717,25 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, rate_control_rate_init(sta); + layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN || + sdata->vif.type == NL80211_IFTYPE_AP; + rcu_read_lock(); err = sta_info_insert(sta); if (err) { /* STA has been freed */ + if (err == -EEXIST && layer2_update) { + /* Need to update layer 2 devices on reassociation */ + sta = sta_info_get(local, mac); + if (sta) + ieee80211_send_layer2_update(sta); + } rcu_read_unlock(); return err; } - if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN || - sdata->vif.type == NL80211_IFTYPE_AP) + if (layer2_update) ieee80211_send_layer2_update(sta); rcu_read_unlock(); @@ -957,6 +987,72 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev, rcu_read_unlock(); return 0; } + +static int ieee80211_get_mesh_params(struct wiphy *wiphy, + struct net_device *dev, + struct mesh_config *conf) +{ + struct ieee80211_sub_if_data *sdata; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT) + return -ENOTSUPP; + memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config)); + return 0; +} + +static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask) +{ + return (mask >> (parm-1)) & 0x1; +} + +static int ieee80211_set_mesh_params(struct wiphy *wiphy, + struct net_device *dev, + const struct mesh_config *nconf, u32 mask) +{ + struct mesh_config *conf; + struct ieee80211_sub_if_data *sdata; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT) + return -ENOTSUPP; + + /* Set the config options which we are interested in setting */ + conf = &(sdata->u.mesh.mshcfg); + if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask)) + conf->dot11MeshRetryTimeout = nconf->dot11MeshRetryTimeout; + if (_chg_mesh_attr(NL80211_MESHCONF_CONFIRM_TIMEOUT, mask)) + conf->dot11MeshConfirmTimeout = nconf->dot11MeshConfirmTimeout; + if (_chg_mesh_attr(NL80211_MESHCONF_HOLDING_TIMEOUT, mask)) + conf->dot11MeshHoldingTimeout = nconf->dot11MeshHoldingTimeout; + if (_chg_mesh_attr(NL80211_MESHCONF_MAX_PEER_LINKS, mask)) + conf->dot11MeshMaxPeerLinks = nconf->dot11MeshMaxPeerLinks; + if (_chg_mesh_attr(NL80211_MESHCONF_MAX_RETRIES, mask)) + conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries; + if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask)) + conf->dot11MeshTTL = nconf->dot11MeshTTL; + if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask)) + conf->auto_open_plinks = nconf->auto_open_plinks; + if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask)) + conf->dot11MeshHWMPmaxPREQretries = + nconf->dot11MeshHWMPmaxPREQretries; + if (_chg_mesh_attr(NL80211_MESHCONF_PATH_REFRESH_TIME, mask)) + conf->path_refresh_time = nconf->path_refresh_time; + if (_chg_mesh_attr(NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, mask)) + conf->min_discovery_timeout = nconf->min_discovery_timeout; + if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, mask)) + conf->dot11MeshHWMPactivePathTimeout = + nconf->dot11MeshHWMPactivePathTimeout; + if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, mask)) + conf->dot11MeshHWMPpreqMinInterval = + nconf->dot11MeshHWMPpreqMinInterval; + if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + mask)) + conf->dot11MeshHWMPnetDiameterTraversalTime = + nconf->dot11MeshHWMPnetDiameterTraversalTime; + return 0; +} + #endif static int ieee80211_change_bss(struct wiphy *wiphy, @@ -972,25 +1068,79 @@ static int ieee80211_change_bss(struct wiphy *wiphy, return -EINVAL; if (params->use_cts_prot >= 0) { - sdata->bss_conf.use_cts_prot = params->use_cts_prot; + sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot; changed |= BSS_CHANGED_ERP_CTS_PROT; } if (params->use_short_preamble >= 0) { - sdata->bss_conf.use_short_preamble = + sdata->vif.bss_conf.use_short_preamble = params->use_short_preamble; changed |= BSS_CHANGED_ERP_PREAMBLE; } if (params->use_short_slot_time >= 0) { - sdata->bss_conf.use_short_slot = + sdata->vif.bss_conf.use_short_slot = params->use_short_slot_time; changed |= BSS_CHANGED_ERP_SLOT; } + if (params->basic_rates) { + int i, j; + u32 rates = 0; + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_supported_band *sband = + wiphy->bands[local->oper_channel->band]; + + for (i = 0; i < params->basic_rates_len; i++) { + int rate = (params->basic_rates[i] & 0x7f) * 5; + for (j = 0; j < sband->n_bitrates; j++) { + if (sband->bitrates[j].bitrate == rate) + rates |= BIT(j); + } + } + sdata->vif.bss_conf.basic_rates = rates; + changed |= BSS_CHANGED_BASIC_RATES; + } + ieee80211_bss_info_change_notify(sdata, changed); return 0; } +static int ieee80211_set_txq_params(struct wiphy *wiphy, + struct ieee80211_txq_params *params) +{ + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_tx_queue_params p; + + if (!local->ops->conf_tx) + return -EOPNOTSUPP; + + memset(&p, 0, sizeof(p)); + p.aifs = params->aifs; + p.cw_max = params->cwmax; + p.cw_min = params->cwmin; + p.txop = params->txop; + if (local->ops->conf_tx(local_to_hw(local), params->queue, &p)) { + printk(KERN_DEBUG "%s: failed to set TX queue " + "parameters for queue %d\n", local->mdev->name, + params->queue); + return -EINVAL; + } + + return 0; +} + +static int ieee80211_set_channel(struct wiphy *wiphy, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type) +{ + struct ieee80211_local *local = wiphy_priv(wiphy); + + local->oper_channel = chan; + local->oper_channel_type = channel_type; + + return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); +} + struct cfg80211_ops mac80211_config_ops = { .add_virtual_intf = ieee80211_add_iface, .del_virtual_intf = ieee80211_del_iface, @@ -1013,6 +1163,10 @@ struct cfg80211_ops mac80211_config_ops = { .change_mpath = ieee80211_change_mpath, .get_mpath = ieee80211_get_mpath, .dump_mpath = ieee80211_dump_mpath, + .set_mesh_params = ieee80211_set_mesh_params, + .get_mesh_params = ieee80211_get_mesh_params, #endif .change_bss = ieee80211_change_bss, + .set_txq_params = ieee80211_set_txq_params, + .set_channel = ieee80211_set_channel, }; |