diff options
Diffstat (limited to 'net/mac80211/main.c')
-rw-r--r-- | net/mac80211/main.c | 207 |
1 files changed, 176 insertions, 31 deletions
diff --git a/net/mac80211/main.c b/net/mac80211/main.c index ded5c3843e06..107a0cbe52ac 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -54,6 +54,9 @@ void ieee80211_configure_filter(struct ieee80211_local *local) if (local->monitors || local->scanning) new_flags |= FIF_BCN_PRBRESP_PROMISC; + if (local->fif_probe_req || local->probe_req_reg) + new_flags |= FIF_PROBE_REQ; + if (local->fif_fcsfail) new_flags |= FIF_FCSFAIL; @@ -99,16 +102,19 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) int ret = 0; int power; enum nl80211_channel_type channel_type; + u32 offchannel_flag; might_sleep(); scan_chan = local->scan_channel; + offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; if (scan_chan) { chan = scan_chan; channel_type = NL80211_CHAN_NO_HT; local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL; - } else if (local->tmp_channel) { + } else if (local->tmp_channel && + local->oper_channel != local->tmp_channel) { chan = scan_chan = local->tmp_channel; channel_type = local->tmp_channel_type; local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL; @@ -117,8 +123,9 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) channel_type = local->_oper_channel_type; local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL; } + offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; - if (chan != local->hw.conf.channel || + if (offchannel_flag || chan != local->hw.conf.channel || channel_type != local->hw.conf.channel_type) { local->hw.conf.channel = chan; local->hw.conf.channel_type = channel_type; @@ -197,6 +204,8 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid; else if (sdata->vif.type == NL80211_IFTYPE_AP) sdata->vif.bss_conf.bssid = sdata->vif.addr; + else if (sdata->vif.type == NL80211_IFTYPE_WDS) + sdata->vif.bss_conf.bssid = NULL; else if (ieee80211_vif_is_mesh(&sdata->vif)) { sdata->vif.bss_conf.bssid = zero; } else { @@ -207,6 +216,7 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, switch (sdata->vif.type) { case NL80211_IFTYPE_AP: case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_WDS: case NL80211_IFTYPE_MESH_POINT: break; default: @@ -291,7 +301,16 @@ static void ieee80211_restart_work(struct work_struct *work) struct ieee80211_local *local = container_of(work, struct ieee80211_local, restart_work); + /* wait for scan work complete */ + flush_workqueue(local->workqueue); + + mutex_lock(&local->mtx); + WARN(test_bit(SCAN_HW_SCANNING, &local->scanning), + "%s called with hardware scan in progress\n", __func__); + mutex_unlock(&local->mtx); + rtnl_lock(); + ieee80211_scan_cancel(local); ieee80211_reconfig(local); rtnl_unlock(); } @@ -302,7 +321,7 @@ void ieee80211_restart_hw(struct ieee80211_hw *hw) trace_api_restart_hw(local); - /* use this reason, __ieee80211_resume will unblock it */ + /* use this reason, ieee80211_reconfig will unblock it */ ieee80211_stop_queues_by_reason(hw, IEEE80211_QUEUE_STOP_REASON_SUSPEND); @@ -316,7 +335,7 @@ static void ieee80211_recalc_smps_work(struct work_struct *work) container_of(work, struct ieee80211_local, recalc_smps); mutex_lock(&local->iflist_mtx); - ieee80211_recalc_smps(local, NULL); + ieee80211_recalc_smps(local); mutex_unlock(&local->iflist_mtx); } @@ -336,9 +355,6 @@ static int ieee80211_ifa_changed(struct notifier_block *nb, struct ieee80211_if_managed *ifmgd; int c = 0; - if (!netif_running(ndev)) - return NOTIFY_DONE; - /* Make sure it's our interface that got changed */ if (!wdev) return NOTIFY_DONE; @@ -349,11 +365,14 @@ static int ieee80211_ifa_changed(struct notifier_block *nb, sdata = IEEE80211_DEV_TO_SUB_IF(ndev); bss_conf = &sdata->vif.bss_conf; + if (!ieee80211_sdata_running(sdata)) + return NOTIFY_DONE; + /* ARP filtering is only supported in managed mode */ if (sdata->vif.type != NL80211_IFTYPE_STATION) return NOTIFY_DONE; - idev = sdata->dev->ip_ptr; + idev = __in_dev_get_rtnl(sdata->dev); if (!idev) return NOTIFY_DONE; @@ -390,6 +409,80 @@ static int ieee80211_ifa_changed(struct notifier_block *nb, } #endif +static int ieee80211_napi_poll(struct napi_struct *napi, int budget) +{ + struct ieee80211_local *local = + container_of(napi, struct ieee80211_local, napi); + + return local->ops->napi_poll(&local->hw, budget); +} + +void ieee80211_napi_schedule(struct ieee80211_hw *hw) +{ + struct ieee80211_local *local = hw_to_local(hw); + + napi_schedule(&local->napi); +} +EXPORT_SYMBOL(ieee80211_napi_schedule); + +void ieee80211_napi_complete(struct ieee80211_hw *hw) +{ + struct ieee80211_local *local = hw_to_local(hw); + + napi_complete(&local->napi); +} +EXPORT_SYMBOL(ieee80211_napi_complete); + +/* There isn't a lot of sense in it, but you can transmit anything you like */ +static const struct ieee80211_txrx_stypes +ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = { + [NL80211_IFTYPE_ADHOC] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4), + }, + [NL80211_IFTYPE_STATION] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4), + }, + [NL80211_IFTYPE_AP] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_ACTION >> 4), + }, + [NL80211_IFTYPE_AP_VLAN] = { + /* copy AP */ + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_ACTION >> 4), + }, + [NL80211_IFTYPE_P2P_CLIENT] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4), + }, + [NL80211_IFTYPE_P2P_GO] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_ACTION >> 4), + }, +}; + struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, const struct ieee80211_ops *ops) { @@ -419,6 +512,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, if (!wiphy) return NULL; + wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes; + wiphy->flags |= WIPHY_FLAG_NETNS_OK | WIPHY_FLAG_4ADDR_AP | WIPHY_FLAG_4ADDR_STATION; @@ -444,6 +539,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, /* set up some defaults */ local->hw.queues = 1; local->hw.max_rates = 1; + local->hw.max_report_rates = 0; local->hw.conf.long_frame_max_tx_count = wiphy->retry_long; local->hw.conf.short_frame_max_tx_count = wiphy->retry_short; local->user_power_level = -1; @@ -455,7 +551,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, __hw_addr_init(&local->mc_list); mutex_init(&local->iflist_mtx); - mutex_init(&local->scan_mtx); + mutex_init(&local->mtx); mutex_init(&local->key_mtx); spin_lock_init(&local->filter_lock); @@ -494,6 +590,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, skb_queue_head_init(&local->skb_queue); skb_queue_head_init(&local->skb_queue_unreliable); + /* init dummy netdev for use w/ NAPI */ + init_dummy_netdev(&local->napi_dev); + return local_to_hw(local); } EXPORT_SYMBOL(ieee80211_alloc_hw); @@ -506,6 +605,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) int channels, max_bitrates; bool supp_ht; static const u32 cipher_suites[] = { + /* keep WEP first, it may be removed below */ WLAN_CIPHER_SUITE_WEP40, WLAN_CIPHER_SUITE_WEP104, WLAN_CIPHER_SUITE_TKIP, @@ -515,6 +615,9 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) WLAN_CIPHER_SUITE_AES_CMAC }; + if (hw->max_report_rates == 0) + hw->max_report_rates = hw->max_rates; + /* * generic code guarantees at least one band, * set this very early because much code assumes @@ -554,6 +657,14 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) /* mac80211 always supports monitor */ local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); +#ifndef CONFIG_MAC80211_MESH + /* mesh depends on Kconfig, but drivers should set it if they want */ + local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT); +#endif + + /* mac80211 supports control port protocol changing */ + local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL; + if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC) @@ -566,10 +677,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) /* * Calculate scan IE length -- we need this to alloc * memory and to subtract from the driver limit. It - * includes the (extended) supported rates and HT + * includes the DS Params, (extended) supported rates, and HT * information -- SSID is the driver's responsibility. */ - local->scan_ies_len = 4 + max_bitrates; /* (ext) supp rates */ + local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ + + 3 /* DS Params */; if (supp_ht) local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap); @@ -589,10 +701,41 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (local->hw.wiphy->max_scan_ie_len) local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len; - local->hw.wiphy->cipher_suites = cipher_suites; - local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); - if (!(local->hw.flags & IEEE80211_HW_MFP_CAPABLE)) - local->hw.wiphy->n_cipher_suites--; + /* Set up cipher suites unless driver already did */ + if (!local->hw.wiphy->cipher_suites) { + local->hw.wiphy->cipher_suites = cipher_suites; + local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); + if (!(local->hw.flags & IEEE80211_HW_MFP_CAPABLE)) + local->hw.wiphy->n_cipher_suites--; + } + if (IS_ERR(local->wep_tx_tfm) || IS_ERR(local->wep_rx_tfm)) { + if (local->hw.wiphy->cipher_suites == cipher_suites) { + local->hw.wiphy->cipher_suites += 2; + local->hw.wiphy->n_cipher_suites -= 2; + } else { + u32 *suites; + int r, w = 0; + + /* Filter out WEP */ + + suites = kmemdup( + local->hw.wiphy->cipher_suites, + sizeof(u32) * local->hw.wiphy->n_cipher_suites, + GFP_KERNEL); + if (!suites) + return -ENOMEM; + for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) { + u32 suite = local->hw.wiphy->cipher_suites[r]; + if (suite == WLAN_CIPHER_SUITE_WEP40 || + suite == WLAN_CIPHER_SUITE_WEP104) + continue; + suites[w++] = suite; + } + local->hw.wiphy->cipher_suites = suites; + local->hw.wiphy->n_cipher_suites = w; + local->wiphy_ciphers_allocated = true; + } + } result = wiphy_register(local->hw.wiphy); if (result < 0) @@ -606,7 +749,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) hw->queues = IEEE80211_MAX_QUEUES; local->workqueue = - create_singlethread_workqueue(wiphy_name(local->hw.wiphy)); + alloc_ordered_workqueue(wiphy_name(local->hw.wiphy), 0); if (!local->workqueue) { result = -ENOMEM; goto fail_workqueue; @@ -641,16 +784,16 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) result = ieee80211_wep_init(local); if (result < 0) - printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", - wiphy_name(local->hw.wiphy), result); + wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n", + result); rtnl_lock(); result = ieee80211_init_rate_ctrl_alg(local, hw->rate_control_algorithm); if (result < 0) { - printk(KERN_DEBUG "%s: Failed to initialize rate control " - "algorithm\n", wiphy_name(local->hw.wiphy)); + wiphy_debug(local->hw.wiphy, + "Failed to initialize rate control algorithm\n"); goto fail_rate; } @@ -659,8 +802,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) result = ieee80211_if_add(local, "wlan%d", NULL, NL80211_IFTYPE_STATION, NULL); if (result) - printk(KERN_WARNING "%s: Failed to add default virtual iface\n", - wiphy_name(local->hw.wiphy)); + wiphy_warn(local->hw.wiphy, + "Failed to add default virtual iface\n"); } rtnl_unlock(); @@ -683,6 +826,9 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) goto fail_ifa; #endif + netif_napi_add(&local->napi_dev, &local->napi, ieee80211_napi_poll, + local->hw.napi_weight); + return 0; #ifdef CONFIG_INET @@ -703,6 +849,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) fail_workqueue: wiphy_unregister(local->hw.wiphy); fail_wiphy_register: + if (local->wiphy_ciphers_allocated) + kfree(local->hw.wiphy->cipher_suites); kfree(local->int_scan_req); return result; } @@ -738,6 +886,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) */ del_timer_sync(&local->work_timer); + cancel_work_sync(&local->restart_work); cancel_work_sync(&local->reconfig_filter); ieee80211_clear_tx_pending(local); @@ -746,8 +895,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) if (skb_queue_len(&local->skb_queue) || skb_queue_len(&local->skb_queue_unreliable)) - printk(KERN_WARNING "%s: skb_queue not empty\n", - wiphy_name(local->hw.wiphy)); + wiphy_warn(local->hw.wiphy, "skb_queue not empty\n"); skb_queue_purge(&local->skb_queue); skb_queue_purge(&local->skb_queue_unreliable); @@ -764,7 +912,10 @@ void ieee80211_free_hw(struct ieee80211_hw *hw) struct ieee80211_local *local = hw_to_local(hw); mutex_destroy(&local->iflist_mtx); - mutex_destroy(&local->scan_mtx); + mutex_destroy(&local->mtx); + + if (local->wiphy_ciphers_allocated) + kfree(local->hw.wiphy->cipher_suites); wiphy_free(local->hw.wiphy); } @@ -812,12 +963,6 @@ static void __exit ieee80211_exit(void) rc80211_minstrel_ht_exit(); rc80211_minstrel_exit(); - /* - * For key todo, it'll be empty by now but the work - * might still be scheduled. - */ - flush_scheduled_work(); - if (mesh_allocated) ieee80211s_stop(); |