summaryrefslogtreecommitdiff
path: root/net/mac80211/regdomain.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/mac80211/regdomain.c')
-rw-r--r--net/mac80211/regdomain.c152
1 files changed, 0 insertions, 152 deletions
diff --git a/net/mac80211/regdomain.c b/net/mac80211/regdomain.c
deleted file mode 100644
index f42678fa62d1..000000000000
--- a/net/mac80211/regdomain.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Copyright 2002-2005, Instant802 Networks, Inc.
- * Copyright 2005-2006, Devicescape Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * This regulatory domain control implementation is known to be incomplete
- * and confusing. mac80211 regulatory domain control will be significantly
- * reworked in the not-too-distant future.
- *
- * For now, drivers wishing to control which channels are and aren't available
- * are advised as follows:
- * - set the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag
- * - continue to include *ALL* possible channels in the modes registered
- * through ieee80211_register_hwmode()
- * - for each allowable ieee80211_channel structure registered in the above
- * call, set the flag member to some meaningful value such as
- * IEEE80211_CHAN_W_SCAN | IEEE80211_CHAN_W_ACTIVE_SCAN |
- * IEEE80211_CHAN_W_IBSS.
- * - leave flag as 0 for non-allowable channels
- *
- * The usual implementation is for a driver to read a device EEPROM to
- * determine which regulatory domain it should be operating under, then
- * looking up the allowable channels in a driver-local table, then performing
- * the above.
- */
-
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include "ieee80211_i.h"
-
-static int ieee80211_regdom = 0x10; /* FCC */
-module_param(ieee80211_regdom, int, 0444);
-MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain; 64=MKK");
-
-/*
- * If firmware is upgraded by the vendor, additional channels can be used based
- * on the new Japanese regulatory rules. This is indicated by setting
- * ieee80211_japan_5ghz module parameter to one when loading the 80211 kernel
- * module.
- */
-static int ieee80211_japan_5ghz /* = 0 */;
-module_param(ieee80211_japan_5ghz, int, 0444);
-MODULE_PARM_DESC(ieee80211_japan_5ghz, "Vendor-updated firmware for 5 GHz");
-
-
-struct ieee80211_channel_range {
- short start_freq;
- short end_freq;
- unsigned char power_level;
- unsigned char antenna_max;
-};
-
-static const struct ieee80211_channel_range ieee80211_fcc_channels[] = {
- { 2412, 2462, 27, 6 } /* IEEE 802.11b/g, channels 1..11 */,
- { 5180, 5240, 17, 6 } /* IEEE 802.11a, channels 36..48 */,
- { 5260, 5320, 23, 6 } /* IEEE 802.11a, channels 52..64 */,
- { 5745, 5825, 30, 6 } /* IEEE 802.11a, channels 149..165, outdoor */,
- { 0 }
-};
-
-static const struct ieee80211_channel_range ieee80211_mkk_channels[] = {
- { 2412, 2472, 20, 6 } /* IEEE 802.11b/g, channels 1..13 */,
- { 5170, 5240, 20, 6 } /* IEEE 802.11a, channels 34..48 */,
- { 5260, 5320, 20, 6 } /* IEEE 802.11a, channels 52..64 */,
- { 0 }
-};
-
-
-static const struct ieee80211_channel_range *channel_range =
- ieee80211_fcc_channels;
-
-
-static void ieee80211_unmask_channel(int mode, struct ieee80211_channel *chan)
-{
- int i;
-
- chan->flag = 0;
-
- for (i = 0; channel_range[i].start_freq; i++) {
- const struct ieee80211_channel_range *r = &channel_range[i];
- if (r->start_freq <= chan->freq && r->end_freq >= chan->freq) {
- if (ieee80211_regdom == 64 && !ieee80211_japan_5ghz &&
- chan->freq >= 5260 && chan->freq <= 5320) {
- /*
- * Skip new channels in Japan since the
- * firmware was not marked having been upgraded
- * by the vendor.
- */
- continue;
- }
-
- if (ieee80211_regdom == 0x10 &&
- (chan->freq == 5190 || chan->freq == 5210 ||
- chan->freq == 5230)) {
- /* Skip MKK channels when in FCC domain. */
- continue;
- }
-
- chan->flag |= IEEE80211_CHAN_W_SCAN |
- IEEE80211_CHAN_W_ACTIVE_SCAN |
- IEEE80211_CHAN_W_IBSS;
- chan->power_level = r->power_level;
- chan->antenna_max = r->antenna_max;
-
- if (ieee80211_regdom == 64 &&
- (chan->freq == 5170 || chan->freq == 5190 ||
- chan->freq == 5210 || chan->freq == 5230)) {
- /*
- * New regulatory rules in Japan have backwards
- * compatibility with old channels in 5.15-5.25
- * GHz band, but the station is not allowed to
- * use active scan on these old channels.
- */
- chan->flag &= ~IEEE80211_CHAN_W_ACTIVE_SCAN;
- }
-
- if (ieee80211_regdom == 64 &&
- (chan->freq == 5260 || chan->freq == 5280 ||
- chan->freq == 5300 || chan->freq == 5320)) {
- /*
- * IBSS is not allowed on 5.25-5.35 GHz band
- * due to radar detection requirements.
- */
- chan->flag &= ~IEEE80211_CHAN_W_IBSS;
- }
-
- break;
- }
- }
-}
-
-
-void ieee80211_set_default_regdomain(struct ieee80211_hw_mode *mode)
-{
- int c;
- for (c = 0; c < mode->num_channels; c++)
- ieee80211_unmask_channel(mode->mode, &mode->channels[c]);
-}
-
-
-void ieee80211_regdomain_init(void)
-{
- if (ieee80211_regdom == 0x40)
- channel_range = ieee80211_mkk_channels;
-}
-