diff options
Diffstat (limited to 'scripts')
| -rw-r--r-- | scripts/.gitignore | 1 | ||||
| -rw-r--r-- | scripts/binoffset.c | 163 | ||||
| -rwxr-xr-x | scripts/extract-ikconfig | 127 | ||||
| -rw-r--r-- | scripts/kconfig/Makefile | 14 | ||||
| -rw-r--r-- | scripts/kconfig/streamline_config.pl | 59 | ||||
| -rwxr-xr-x | scripts/kernel-doc | 16 | ||||
| -rwxr-xr-x | scripts/recordmcount.pl | 39 |
7 files changed, 134 insertions, 285 deletions
diff --git a/scripts/.gitignore b/scripts/.gitignore index 52cab46ae35a..c5d5db54c009 100644 --- a/scripts/.gitignore +++ b/scripts/.gitignore @@ -6,5 +6,4 @@ kallsyms pnmtologo bin2c unifdef -binoffset ihex2fw diff --git a/scripts/binoffset.c b/scripts/binoffset.c deleted file mode 100644 index 1a2e39b8e3e5..000000000000 --- a/scripts/binoffset.c +++ /dev/null @@ -1,163 +0,0 @@ -/*************************************************************************** - * binoffset.c - * (C) 2002 Randy Dunlap <rdunlap@xenotime.net> - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -# binoffset.c: -# - searches a (binary) file for a specified (binary) pattern -# - returns the offset of the located pattern or ~0 if not found -# - exits with exit status 0 normally or non-0 if pattern is not found -# or any other error occurs. - -****************************************************************/ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <errno.h> -#include <unistd.h> -#include <fcntl.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/mman.h> - -#define VERSION "0.1" -#define BUF_SIZE (16 * 1024) -#define PAT_SIZE 100 - -char *progname; -char *inputname; -int inputfd; -unsigned int bix; /* buf index */ -unsigned char patterns [PAT_SIZE] = {0}; /* byte-sized pattern array */ -int pat_len; /* actual number of pattern bytes */ -unsigned char *madr; /* mmap address */ -size_t filesize; -int num_matches = 0; -off_t firstloc = 0; - -void usage (void) -{ - fprintf (stderr, "%s ver. %s\n", progname, VERSION); - fprintf (stderr, "usage: %s filename pattern_bytes\n", - progname); - fprintf (stderr, " [prints location of pattern_bytes in file]\n"); - exit (1); -} - -void get_pattern (int pat_count, char *pats []) -{ - int ix, err, tmp; - -#ifdef DEBUG - fprintf (stderr,"get_pattern: count = %d\n", pat_count); - for (ix = 0; ix < pat_count; ix++) - fprintf (stderr, " pat # %d: [%s]\n", ix, pats[ix]); -#endif - - for (ix = 0; ix < pat_count; ix++) { - tmp = 0; - err = sscanf (pats[ix], "%5i", &tmp); - if (err != 1 || tmp > 0xff) { - fprintf (stderr, "pattern or value error in pattern # %d [%s]\n", - ix, pats[ix]); - usage (); - } - patterns [ix] = tmp; - } - pat_len = pat_count; -} - -void search_pattern (void) -{ - for (bix = 0; bix < filesize; bix++) { - if (madr[bix] == patterns[0]) { - if (memcmp (&madr[bix], patterns, pat_len) == 0) { - if (num_matches == 0) - firstloc = bix; - num_matches++; - } - } - } -} - -#ifdef NOTDEF -size_t get_filesize (int fd) -{ - off_t end_off = lseek (fd, 0, SEEK_END); - lseek (fd, 0, SEEK_SET); - return (size_t) end_off; -} -#endif - -size_t get_filesize (int fd) -{ - int err; - struct stat stat; - - err = fstat (fd, &stat); - fprintf (stderr, "filesize: %ld\n", err < 0 ? (long)err : stat.st_size); - if (err < 0) - return err; - return (size_t) stat.st_size; -} - -int main (int argc, char *argv []) -{ - progname = argv[0]; - - if (argc < 3) - usage (); - - get_pattern (argc - 2, argv + 2); - - inputname = argv[1]; - - inputfd = open (inputname, O_RDONLY); - if (inputfd == -1) { - fprintf (stderr, "%s: cannot open '%s'\n", - progname, inputname); - exit (3); - } - - filesize = get_filesize (inputfd); - - madr = mmap (0, filesize, PROT_READ, MAP_PRIVATE, inputfd, 0); - if (madr == MAP_FAILED) { - fprintf (stderr, "mmap error = %d\n", errno); - close (inputfd); - exit (4); - } - - search_pattern (); - - if (munmap (madr, filesize)) - fprintf (stderr, "munmap error = %d\n", errno); - - if (close (inputfd)) - fprintf (stderr, "%s: error %d closing '%s'\n", - progname, errno, inputname); - - fprintf (stderr, "number of pattern matches = %d\n", num_matches); - if (num_matches == 0) - firstloc = ~0; - printf ("%ld\n", firstloc); - fprintf (stderr, "%ld\n", firstloc); - - exit (num_matches ? 0 : 2); -} - -/* end binoffset.c */ diff --git a/scripts/extract-ikconfig b/scripts/extract-ikconfig index de233ff43c1c..37f30d36c944 100755 --- a/scripts/extract-ikconfig +++ b/scripts/extract-ikconfig @@ -1,92 +1,53 @@ #!/bin/sh -# extracts .config info from a [b]zImage file -# uses: binoffset (new), dd, zcat, strings, grep -# $arg1 is [b]zImage filename - -binoffset="./scripts/binoffset" -test -e $binoffset || cc -o $binoffset ./scripts/binoffset.c || exit 1 - -IKCFG_ST="0x49 0x4b 0x43 0x46 0x47 0x5f 0x53 0x54" -IKCFG_ED="0x49 0x4b 0x43 0x46 0x47 0x5f 0x45 0x44" -dump_config() { - file="$1" - - start=`$binoffset $file $IKCFG_ST 2>/dev/null` - [ "$?" != "0" ] && start="-1" - if [ "$start" -eq "-1" ]; then - return - fi - end=`$binoffset $file $IKCFG_ED 2>/dev/null` - [ "$?" != "0" ] && end="-1" - if [ "$end" -eq "-1" ]; then - return - fi - - start=`expr $start + 8` - size=`expr $end - $start` - - dd if="$file" ibs=1 skip="$start" count="$size" 2>/dev/null | zcat - - clean_up - exit 0 -} - - -usage() -{ - echo " usage: extract-ikconfig [b]zImage_filename" -} - -clean_up() +# ---------------------------------------------------------------------- +# extract-ikconfig - Extract the .config file from a kernel image +# +# This will only work when the kernel was compiled with CONFIG_IKCONFIG. +# +# The obscure use of the "tr" filter is to work around older versions of +# "grep" that report the byte offset of the line instead of the pattern. +# +# (c) 2009, Dick Streefland <dick@streefland.net> +# Licensed under the terms of the GNU General Public License. +# ---------------------------------------------------------------------- + +gz1='\037\213\010' +gz2='01' +cf1='IKCFG_ST\037\213\010' +cf2='0123456789' + +dump_config() { - if [ "$TMPFILE" != "" ]; then - rm -f $TMPFILE + if pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"` + then + pos=${pos%%:*} + tail -c+$(($pos+8)) "$1" | zcat -q + exit 0 fi } -if [ $# -lt 1 ] +# Check invocation: +me=${0##*/} +img=$1 +if [ $# -ne 1 -o ! -s "$img" ] then - usage - exit 1 + echo "Usage: $me <kernel-image>" >&2 + exit 2 fi -TMPFILE=`mktemp -t ikconfig-XXXXXX` || exit 1 -image="$1" - -# vmlinux: Attempt to dump the configuration from the file directly -dump_config "$image" - -GZHDR1="0x1f 0x8b 0x08 0x00" -GZHDR2="0x1f 0x8b 0x08 0x08" - -ELFHDR="0x7f 0x45 0x4c 0x46" - -# vmlinux.gz: Check for a compressed images -off=`$binoffset "$image" $GZHDR1 2>/dev/null` -[ "$?" != "0" ] && off="-1" -if [ "$off" -eq "-1" ]; then - off=`$binoffset "$image" $GZHDR2 2>/dev/null` - [ "$?" != "0" ] && off="-1" -fi -if [ "$off" -eq "0" ]; then - zcat <"$image" >"$TMPFILE" - dump_config "$TMPFILE" -elif [ "$off" -ne "-1" ]; then - (dd ibs="$off" skip=1 count=0 && dd bs=512k) <"$image" 2>/dev/null | \ - zcat >"$TMPFILE" - dump_config "$TMPFILE" - -# check if this is simply an ELF file -else - off=`$binoffset "$image" $ELFHDR 2>/dev/null` - [ "$?" != "0" ] && off="-1" - if [ "$off" -eq "0" ]; then - dump_config "$image" - fi -fi - -echo "ERROR: Unable to extract kernel configuration information." -echo " This kernel image may not have the config info." - -clean_up +# Initial attempt for uncompressed images or objects: +dump_config "$img" + +# That didn't work, so decompress and try again: +tmp=/tmp/ikconfig$$ +trap "rm -f $tmp" 0 +for pos in `tr "$gz1\n$gz2" "\n$gz2=" < "$img" | grep -abo "^$gz2"` +do + pos=${pos%%:*} + tail -c+$pos "$img" | zcat 2> /dev/null > $tmp + dump_config $tmp +done + +# Bail out: +echo "$me: Cannot find kernel config." >&2 exit 1 diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 999e8a7d5bf7..186c46604d06 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -30,8 +30,17 @@ silentoldconfig: $(obj)/conf $(Q)mkdir -p include/generated $< -s $(Kconfig) +# if no path is given, then use src directory to find file +ifdef LSMOD +LSMOD_F := $(LSMOD) +ifeq ($(findstring /,$(LSMOD)),) + LSMOD_F := $(objtree)/$(LSMOD) +endif +endif + localmodconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config + $(Q)mkdir -p include/generated + $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config $(Q)if [ -f .config ]; then \ cmp -s .tmp.config .config || \ (mv -f .config .config.old.1; \ @@ -45,7 +54,8 @@ localmodconfig: $(obj)/streamline_config.pl $(obj)/conf $(Q)rm -f .tmp.config localyesconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config + $(Q)mkdir -p include/generated + $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config $(Q)sed -i s/=m/=y/ .tmp.config $(Q)if [ -f .config ]; then \ cmp -s .tmp.config .config || \ diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl index 0d800820c3cd..afbd54ac1d83 100644 --- a/scripts/kconfig/streamline_config.pl +++ b/scripts/kconfig/streamline_config.pl @@ -113,6 +113,7 @@ find_config; # Get the build source and top level Kconfig file (passed in) my $ksource = $ARGV[0]; my $kconfig = $ARGV[1]; +my $lsmod_file = $ARGV[2]; my @makefiles = `find $ksource -name Makefile`; my %depends; @@ -121,6 +122,8 @@ my %prompts; my %objects; my $var; my $cont = 0; +my $iflevel = 0; +my @ifdeps; # prevent recursion my %read_kconfigs; @@ -146,6 +149,15 @@ sub read_kconfig { $state = "NEW"; $config = $1; + for (my $i = 0; $i < $iflevel; $i++) { + if ($i) { + $depends{$config} .= " " . $ifdeps[$i]; + } else { + $depends{$config} = $ifdeps[$i]; + } + $state = "DEP"; + } + # collect the depends for the config } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) { $state = "DEP"; @@ -166,6 +178,21 @@ sub read_kconfig { # note if the config has a prompt $prompt{$config} = 1; + # Check for if statements + } elsif (/^if\s+(.*\S)\s*$/) { + my $deps = $1; + # remove beginning and ending non text + $deps =~ s/^[^a-zA-Z0-9_]*//; + $deps =~ s/[^a-zA-Z0-9_]*$//; + + my @deps = split /[^a-zA-Z0-9_]+/, $deps; + + $ifdeps[$iflevel++] = join ':', @deps; + + } elsif (/^endif/) { + + $iflevel-- if ($iflevel); + # stop on "help" } elsif (/^\s*help\s*$/) { $state = "NONE"; @@ -237,8 +264,36 @@ foreach my $makefile (@makefiles) { my %modules; -# see what modules are loaded on this system -open(LIN,"/sbin/lsmod|") || die "Cant lsmod"; +if (defined($lsmod_file)) { + if ( ! -f $lsmod_file) { + die "$lsmod_file not found"; + } + if ( -x $lsmod_file) { + # the file is executable, run it + open(LIN, "$lsmod_file|"); + } else { + # Just read the contents + open(LIN, "$lsmod_file"); + } +} else { + + # see what modules are loaded on this system + my $lsmod; + + foreach $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) { + if ( -x "$dir/lsmod" ) { + $lsmod = "$dir/lsmod"; + last; + } +} + if (!defined($lsmod)) { + # try just the path + $lsmod = "lsmod"; + } + + open(LIN,"$lsmod|") || die "Can not call lsmod with $lsmod"; +} + while (<LIN>) { next if (/^Module/); # Skip the first line. if (/^(\S+)/) { diff --git a/scripts/kernel-doc b/scripts/kernel-doc index 241310e59cd6..208ad3b0ca51 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -13,8 +13,6 @@ use strict; ## This software falls under the GNU General Public License. ## ## Please read the COPYING file for more information ## -# w.o. 03-11-2000: added the '-filelist' option. - # 18/01/2001 - Cleanups # Functions prototyped as foo(void) same as foo() # Stop eval'ing where we don't need to. @@ -245,7 +243,7 @@ my $man_date = ('January', 'February', 'March', 'April', 'May', 'June', # could cause "use of undefined value" or other bugs. my ($function, %function_table, %parametertypes, $declaration_purpose); my ($type, $declaration_name, $return_type); -my ($newsection, $newcontents, $prototype, $filelist, $brcount, %source_map); +my ($newsection, $newcontents, $prototype, $brcount, %source_map); if (defined($ENV{'KBUILD_VERBOSE'})) { $verbose = "$ENV{'KBUILD_VERBOSE'}"; @@ -338,8 +336,6 @@ while ($ARGV[0] =~ m/^-(.*)/) { $verbose = 1; } elsif (($cmd eq "-h") || ($cmd eq "--help")) { usage(); - } elsif ($cmd eq '-filelist') { - $filelist = shift @ARGV; } elsif ($cmd eq '-no-doc-sections') { $no_doc_sections = 1; } @@ -1811,14 +1807,6 @@ if (open(SOURCE_MAP, "<.tmp_filelist.txt")) { close(SOURCE_MAP); } -if ($filelist) { - open(FLIST,"<$filelist") or die "Can't open file list $filelist"; - while(<FLIST>) { - chop; - process_file($_); - } -} - foreach (@ARGV) { chomp; process_file($_); @@ -2023,6 +2011,8 @@ sub process_file($) { return; } + $. = 1; + $section_counter = 0; while (<IN>) { if ($state == 0) { diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index ea6f6e3adaea..f3c9c0a90b98 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -136,13 +136,14 @@ my %text_sections = ( ".text.unlikely" => 1, ); -$objdump = "objdump" if ((length $objdump) == 0); -$objcopy = "objcopy" if ((length $objcopy) == 0); -$cc = "gcc" if ((length $cc) == 0); -$ld = "ld" if ((length $ld) == 0); -$nm = "nm" if ((length $nm) == 0); -$rm = "rm" if ((length $rm) == 0); -$mv = "mv" if ((length $mv) == 0); +# Note: we are nice to C-programmers here, thus we skip the '||='-idiom. +$objdump = 'objdump' if (!$objdump); +$objcopy = 'objcopy' if (!$objcopy); +$cc = 'gcc' if (!$cc); +$ld = 'ld' if (!$ld); +$nm = 'nm' if (!$nm); +$rm = 'rm' if (!$rm); +$mv = 'mv' if (!$mv); #print STDERR "running: $P '$arch' '$objdump' '$objcopy' '$cc' '$ld' " . # "'$nm' '$rm' '$mv' '$inputfile'\n"; @@ -432,14 +433,14 @@ sub update_funcs # Loop through all the mcount caller offsets and print a reference # to the caller based from the ref_func. - for (my $i=0; $i <= $#offsets; $i++) { - if (!$opened) { - open(FILE, ">$mcount_s") || die "can't create $mcount_s\n"; - $opened = 1; - print FILE "\t.section $mcount_section,\"a\",$section_type\n"; - print FILE "\t.align $alignment\n" if (defined($alignment)); - } - printf FILE "\t%s %s + %d\n", $type, $ref_func, $offsets[$i] - $offset; + if (!$opened) { + open(FILE, ">$mcount_s") || die "can't create $mcount_s\n"; + $opened = 1; + print FILE "\t.section $mcount_section,\"a\",$section_type\n"; + print FILE "\t.align $alignment\n" if (defined($alignment)); + } + foreach my $cur_offset (@offsets) { + printf FILE "\t%s %s + %d\n", $type, $ref_func, $cur_offset - $offset; } } @@ -476,11 +477,7 @@ while (<IN>) { $read_headers = 0; # Only record text sections that we know are safe - if (defined($text_sections{$1})) { - $read_function = 1; - } else { - $read_function = 0; - } + $read_function = defined($text_sections{$1}); # print out any recorded offsets update_funcs(); @@ -514,7 +511,7 @@ while (<IN>) { } # is this a call site to mcount? If so, record it to print later if ($text_found && /$mcount_regex/) { - $offsets[$#offsets + 1] = hex $1; + push(@offsets, hex $1); } } |