diff options
Diffstat (limited to 'sound/oss/i810_audio.c')
| -rw-r--r-- | sound/oss/i810_audio.c | 3656 |
1 files changed, 0 insertions, 3656 deletions
diff --git a/sound/oss/i810_audio.c b/sound/oss/i810_audio.c deleted file mode 100644 index f5e31f11973d..000000000000 --- a/sound/oss/i810_audio.c +++ /dev/null @@ -1,3656 +0,0 @@ -/* - * Intel i810 and friends ICH driver for Linux - * Alan Cox <alan@redhat.com> - * - * Built from: - * Low level code: Zach Brown (original nonworking i810 OSS driver) - * Jaroslav Kysela <perex@suse.cz> (working ALSA driver) - * - * Framework: Thomas Sailer <sailer@ife.ee.ethz.ch> - * Extended by: Zach Brown <zab@redhat.com> - * and others.. - * - * Hardware Provided By: - * Analog Devices (A major AC97 codec maker) - * Intel Corp (you've probably heard of them already) - * - * AC97 clues and assistance provided by - * Analog Devices - * Zach 'Fufu' Brown - * Jeff Garzik - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * Intel 810 theory of operation - * - * The chipset provides three DMA channels that talk to an AC97 - * CODEC (AC97 is a digital/analog mixer standard). At its simplest - * you get 48Khz audio with basic volume and mixer controls. At the - * best you get rate adaption in the codec. We set the card up so - * that we never take completion interrupts but instead keep the card - * chasing its tail around a ring buffer. This is needed for mmap - * mode audio and happens to work rather well for non-mmap modes too. - * - * The board has one output channel for PCM audio (supported) and - * a stereo line in and mono microphone input. Again these are normally - * locked to 48Khz only. Right now recording is not finished. - * - * There is no midi support, no synth support. Use timidity. To get - * esd working you need to use esd -r 48000 as it won't probe 48KHz - * by default. mpg123 can't handle 48Khz only audio so use xmms. - * - * Fix The Sound On Dell - * - * Not everyone uses 48KHz. We know of no way to detect this reliably - * and certainly not to get the right data. If your i810 audio sounds - * stupid you may need to investigate other speeds. According to Analog - * they tend to use a 14.318MHz clock which gives you a base rate of - * 41194Hz. - * - * This is available via the 'ftsodell=1' option. - * - * If you need to force a specific rate set the clocking= option - * - * This driver is cursed. (Ben LaHaise) - * - * ICH 3 caveats - * Intel errata #7 for ICH3 IO. We need to disable SMI stuff - * when codec probing. [Not Yet Done] - * - * ICH 4 caveats - * - * The ICH4 has the feature, that the codec ID doesn't have to be - * congruent with the IO connection. - * - * Therefore, from driver version 0.23 on, there is a "codec ID" <-> - * "IO register base offset" mapping (card->ac97_id_map) field. - * - * Juergen "George" Sawinski (jsaw) - */ - -#include <linux/module.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/ioport.h> -#include <linux/sched.h> -#include <linux/delay.h> -#include <linux/sound.h> -#include <linux/slab.h> -#include <linux/soundcard.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <asm/io.h> -#include <asm/dma.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/spinlock.h> -#include <linux/smp_lock.h> -#include <linux/ac97_codec.h> -#include <linux/bitops.h> -#include <linux/mutex.h> -#include <linux/mm.h> - -#include <asm/uaccess.h> - -#define DRIVER_VERSION "1.01" - -#define MODULOP2(a, b) ((a) & ((b) - 1)) -#define MASKP2(a, b) ((a) & ~((b) - 1)) - -static int ftsodell; -static int strict_clocking; -static unsigned int clocking; -static int spdif_locked; -static int ac97_quirk = AC97_TUNE_DEFAULT; - -//#define DEBUG -//#define DEBUG2 -//#define DEBUG_INTERRUPTS -//#define DEBUG_MMAP -//#define DEBUG_MMIO - -#define ADC_RUNNING 1 -#define DAC_RUNNING 2 - -#define I810_FMT_16BIT 1 -#define I810_FMT_STEREO 2 -#define I810_FMT_MASK 3 - -#define SPDIF_ON 0x0004 -#define SURR_ON 0x0010 -#define CENTER_LFE_ON 0x0020 -#define VOL_MUTED 0x8000 - -/* the 810's array of pointers to data buffers */ - -struct sg_item { -#define BUSADDR_MASK 0xFFFFFFFE - u32 busaddr; -#define CON_IOC 0x80000000 /* interrupt on completion */ -#define CON_BUFPAD 0x40000000 /* pad underrun with last sample, else 0 */ -#define CON_BUFLEN_MASK 0x0000ffff /* buffer length in samples */ - u32 control; -}; - -/* an instance of the i810 channel */ -#define SG_LEN 32 -struct i810_channel -{ - /* these sg guys should probably be allocated - separately as nocache. Must be 8 byte aligned */ - struct sg_item sg[SG_LEN]; /* 32*8 */ - u32 offset; /* 4 */ - u32 port; /* 4 */ - u32 used; - u32 num; -}; - -/* - * we have 3 separate dma engines. pcm in, pcm out, and mic. - * each dma engine has controlling registers. These goofy - * names are from the datasheet, but make it easy to write - * code while leafing through it. - * - * ICH4 has 6 dma engines, pcm in, pcm out, mic, pcm in 2, - * mic in 2, s/pdif. Of special interest is the fact that - * the upper 3 DMA engines on the ICH4 *must* be accessed - * via mmio access instead of pio access. - */ - -#define ENUM_ENGINE(PRE,DIG) \ -enum { \ - PRE##_BASE = 0x##DIG##0, /* Base Address */ \ - PRE##_BDBAR = 0x##DIG##0, /* Buffer Descriptor list Base Address */ \ - PRE##_CIV = 0x##DIG##4, /* Current Index Value */ \ - PRE##_LVI = 0x##DIG##5, /* Last Valid Index */ \ - PRE##_SR = 0x##DIG##6, /* Status Register */ \ - PRE##_PICB = 0x##DIG##8, /* Position In Current Buffer */ \ - PRE##_PIV = 0x##DIG##a, /* Prefetched Index Value */ \ - PRE##_CR = 0x##DIG##b /* Control Register */ \ -} - -ENUM_ENGINE(OFF,0); /* Offsets */ -ENUM_ENGINE(PI,0); /* PCM In */ -ENUM_ENGINE(PO,1); /* PCM Out */ -ENUM_ENGINE(MC,2); /* Mic In */ - -enum { - GLOB_CNT = 0x2c, /* Global Control */ - GLOB_STA = 0x30, /* Global Status */ - CAS = 0x34 /* Codec Write Semaphore Register */ -}; - -ENUM_ENGINE(MC2,4); /* Mic In 2 */ -ENUM_ENGINE(PI2,5); /* PCM In 2 */ -ENUM_ENGINE(SP,6); /* S/PDIF */ - -enum { - SDM = 0x80 /* SDATA_IN Map Register */ -}; - -/* interrupts for a dma engine */ -#define DMA_INT_FIFO (1<<4) /* fifo under/over flow */ -#define DMA_INT_COMPLETE (1<<3) /* buffer read/write complete and ioc set */ -#define DMA_INT_LVI (1<<2) /* last valid done */ -#define DMA_INT_CELV (1<<1) /* last valid is current */ -#define DMA_INT_DCH (1) /* DMA Controller Halted (happens on LVI interrupts) */ -#define DMA_INT_MASK (DMA_INT_FIFO|DMA_INT_COMPLETE|DMA_INT_LVI) - -/* interrupts for the whole chip */ -#define INT_SEC (1<<11) -#define INT_PRI (1<<10) -#define INT_MC (1<<7) -#define INT_PO (1<<6) -#define INT_PI (1<<5) -#define INT_MO (1<<2) -#define INT_NI (1<<1) -#define INT_GPI (1<<0) -#define INT_MASK (INT_SEC|INT_PRI|INT_MC|INT_PO|INT_PI|INT_MO|INT_NI|INT_GPI) - -/* magic numbers to protect our data structures */ -#define I810_CARD_MAGIC 0x5072696E /* "Prin" */ -#define I810_STATE_MAGIC 0x63657373 /* "cess" */ -#define I810_DMA_MASK 0xffffffff /* DMA buffer mask for pci_alloc_consist */ -#define NR_HW_CH 3 - -/* maxinum number of AC97 codecs connected, AC97 2.0 defined 4 */ -#define NR_AC97 4 - -/* Please note that an 8bit mono stream is not valid on this card, you must have a 16bit */ -/* stream at a minimum for this card to be happy */ -static const unsigned sample_size[] = { 1, 2, 2, 4 }; -/* Samples are 16bit values, so we are shifting to a word, not to a byte, hence shift */ -/* values are one less than might be expected */ -static const unsigned sample_shift[] = { -1, 0, 0, 1 }; - -enum { - ICH82801AA = 0, - ICH82901AB, - INTEL440MX, - INTELICH2, - INTELICH3, - INTELICH4, - INTELICH5, - SI7012, - NVIDIA_NFORCE, - AMD768, - AMD8111 -}; - -static char * card_names[] = { - "Intel ICH 82801AA", - "Intel ICH 82901AB", - "Intel 440MX", - "Intel ICH2", - "Intel ICH3", - "Intel ICH4", - "Intel ICH5", - "SiS 7012", - "NVIDIA nForce Audio", - "AMD 768", - "AMD-8111 IOHub" -}; - -/* These are capabilities (and bugs) the chipsets _can_ have */ -static struct { - int16_t nr_ac97; -#define CAP_MMIO 0x0001 -#define CAP_20BIT_AUDIO_SUPPORT 0x0002 - u_int16_t flags; -} card_cap[] = { - { 1, 0x0000 }, /* ICH82801AA */ - { 1, 0x0000 }, /* ICH82901AB */ - { 1, 0x0000 }, /* INTEL440MX */ - { 1, 0x0000 }, /* INTELICH2 */ - { 2, 0x0000 }, /* INTELICH3 */ - { 3, 0x0003 }, /* INTELICH4 */ - { 3, 0x0003 }, /* INTELICH5 */ - /*@FIXME to be verified*/ { 2, 0x0000 }, /* SI7012 */ - /*@FIXME to be verified*/ { 2, 0x0000 }, /* NVIDIA_NFORCE */ - /*@FIXME to be verified*/ { 2, 0x0000 }, /* AMD768 */ - /*@FIXME to be verified*/ { 3, 0x0001 }, /* AMD8111 */ -}; - -static struct pci_device_id i810_pci_tbl [] = { - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_5, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, ICH82801AA}, - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_5, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, ICH82901AB}, - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_440MX, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTEL440MX}, - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_4, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH2}, - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_5, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH3}, - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_5, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH4}, - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_5, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH5}, - {PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7012, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, SI7012}, - {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, NVIDIA_NFORCE}, - {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, NVIDIA_NFORCE}, - {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, NVIDIA_NFORCE}, - {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7445, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD768}, - {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_AUDIO, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD8111}, - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_5, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH4}, - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_18, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH4}, - {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_AUDIO, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, NVIDIA_NFORCE}, - {0,} -}; - -MODULE_DEVICE_TABLE (pci, i810_pci_tbl); - -#ifdef CONFIG_PM -#define PM_SUSPENDED(card) (card->pm_suspended) -#else -#define PM_SUSPENDED(card) (0) -#endif - -/* "software" or virtual channel, an instance of opened /dev/dsp */ -struct i810_state { - unsigned int magic; - struct i810_card *card; /* Card info */ - - /* single open lock mechanism, only used for recording */ - struct mutex open_mutex; - wait_queue_head_t open_wait; - - /* file mode */ - mode_t open_mode; - - /* virtual channel number */ - int virt; - -#ifdef CONFIG_PM - unsigned int pm_saved_dac_rate,pm_saved_adc_rate; -#endif - struct dmabuf { - /* wave sample stuff */ - unsigned int rate; - unsigned char fmt, enable, trigger; - - /* hardware channel */ - struct i810_channel *read_channel; - struct i810_channel *write_channel; - - /* OSS buffer management stuff */ - void *rawbuf; - dma_addr_t dma_handle; - unsigned buforder; - unsigned numfrag; - unsigned fragshift; - - /* our buffer acts like a circular ring */ - unsigned hwptr; /* where dma last started, updated by update_ptr */ - unsigned swptr; /* where driver last clear/filled, updated by read/write */ - int count; /* bytes to be consumed or been generated by dma machine */ - unsigned total_bytes; /* total bytes dmaed by hardware */ - - unsigned error; /* number of over/underruns */ - wait_queue_head_t wait; /* put process on wait queue when no more space in buffer */ - - /* redundant, but makes calculations easier */ - /* what the hardware uses */ - unsigned dmasize; - unsigned fragsize; - unsigned fragsamples; - - /* what we tell the user to expect */ - unsigned userfrags; - unsigned userfragsize; - - /* OSS stuff */ - unsigned mapped:1; - unsigned ready:1; - unsigned update_flag; - unsigned ossfragsize; - unsigned ossmaxfrags; - unsigned subdivision; - } dmabuf; -}; - - -struct i810_card { - unsigned int magic; - - /* We keep i810 cards in a linked list */ - struct i810_card *next; - - /* The i810 has a certain amount of cross channel interaction - so we use a single per card lock */ - spinlock_t lock; - - /* Control AC97 access serialization */ - spinlock_t ac97_lock; - - /* PCI device stuff */ - struct pci_dev * pci_dev; - u16 pci_id; - u16 pci_id_internal; /* used to access card_cap[] */ -#ifdef CONFIG_PM - u16 pm_suspended; - int pm_saved_mixer_settings[SOUND_MIXER_NRDEVICES][NR_AC97]; -#endif - /* soundcore stuff */ - int dev_audio; - - /* structures for abstraction of hardware facilities, codecs, banks and channels*/ - u16 ac97_id_map[NR_AC97]; - struct ac97_codec *ac97_codec[NR_AC97]; - struct i810_state *states[NR_HW_CH]; - struct i810_channel *channel; /* 1:1 to states[] but diff. lifetime */ - dma_addr_t chandma; - - u16 ac97_features; - u16 ac97_status; - u16 channels; - - /* hardware resources */ - unsigned long ac97base; - unsigned long iobase; - u32 irq; - - unsigned long ac97base_mmio_phys; - unsigned long iobase_mmio_phys; - u_int8_t __iomem *ac97base_mmio; - u_int8_t __iomem *iobase_mmio; - - int use_mmio; - - /* Function support */ - struct i810_channel *(*alloc_pcm_channel)(struct i810_card *); - struct i810_channel *(*alloc_rec_pcm_channel)(struct i810_card *); - struct i810_channel *(*alloc_rec_mic_channel)(struct i810_card *); - void (*free_pcm_channel)(struct i810_card *, int chan); - - /* We have a *very* long init time possibly, so use this to block */ - /* attempts to open our devices before we are ready (stops oops'es) */ - int initializing; -}; - -/* extract register offset from codec struct */ -#define IO_REG_OFF(codec) (((struct i810_card *) codec->private_data)->ac97_id_map[codec->id]) - -#define I810_IOREAD(size, type, card, off) \ -({ \ - type val; \ - if (card->use_mmio) \ - val=read##size(card->iobase_mmio+off); \ - else \ - val=in##size(card->iobase+off); \ - val; \ -}) - -#define I810_IOREADL(card, off) I810_IOREAD(l, u32, card, off) -#define I810_IOREADW(card, off) I810_IOREAD(w, u16, card, off) -#define I810_IOREADB(card, off) I810_IOREAD(b, u8, card, off) - -#define I810_IOWRITE(size, val, card, off) \ -({ \ - if (card->use_mmio) \ - write##size(val, card->iobase_mmio+off); \ - else \ - out##size(val, card->iobase+off); \ -}) - -#define I810_IOWRITEL(val, card, off) I810_IOWRITE(l, val, card, off) -#define I810_IOWRITEW(val, card, off) I810_IOWRITE(w, val, card, off) -#define I810_IOWRITEB(val, card, off) I810_IOWRITE(b, val, card, off) - -#define GET_CIV(card, port) MODULOP2(I810_IOREADB((card), (port) + OFF_CIV), SG_LEN) -#define GET_LVI(card, port) MODULOP2(I810_IOREADB((card), (port) + OFF_LVI), SG_LEN) - -/* set LVI from CIV */ -#define CIV_TO_LVI(card, port, off) \ - I810_IOWRITEB(MODULOP2(GET_CIV((card), (port)) + (off), SG_LEN), (card), (port) + OFF_LVI) - -static struct ac97_quirk ac97_quirks[] __devinitdata = { - { - .vendor = 0x0e11, - .device = 0x00b8, - .name = "Compaq Evo D510C", - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x1028, - .device = 0x00d8, - .name = "Dell Precision 530", /* AD1885 */ - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x1028, - .device = 0x0126, - .name = "Dell Optiplex GX260", /* AD1981A */ - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x1028, - .device = 0x012d, - .name = "Dell Precision 450", /* AD1981B*/ - .type = AC97_TUNE_HP_ONLY - }, - { /* FIXME: which codec? */ - .vendor = 0x103c, - .device = 0x00c3, - .name = "Hewlett-Packard onboard", - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x103c, - .device = 0x12f1, - .name = "HP xw8200", /* AD1981B*/ - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x103c, - .device = 0x3008, - .name = "HP xw4200", /* AD1981B*/ - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x10f1, - .device = 0x2665, - .name = "Fujitsu-Siemens Celsius", /* AD1981? */ - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x10f1, - .device = 0x2885, - .name = "AMD64 Mobo", /* ALC650 */ - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x110a, - .device = 0x0056, - .name = "Fujitsu-Siemens Scenic", /* AD1981? */ - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x11d4, - .device = 0x5375, - .name = "ADI AD1985 (discrete)", - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x1462, - .device = 0x5470, - .name = "MSI P4 ATX 645 Ultra", - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x1734, - .device = 0x0088, - .name = "Fujitsu-Siemens D1522", /* AD1981 */ - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x8086, - .device = 0x4856, - .name = "Intel D845WN (82801BA)", - .type = AC97_TUNE_SWAP_HP - }, - { - .vendor = 0x8086, - .device = 0x4d44, - .name = "Intel D850EMV2", /* AD1885 */ - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x8086, - .device = 0x4d56, - .name = "Intel ICH/AD1885", - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x1028, - .device = 0x012d, - .name = "Dell Precision 450", /* AD1981B*/ - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x103c, - .device = 0x3008, - .name = "HP xw4200", /* AD1981B*/ - .type = AC97_TUNE_HP_ONLY - }, - { - .vendor = 0x103c, - .device = 0x12f1, - .name = "HP xw8200", /* AD1981B*/ - .type = AC97_TUNE_HP_ONLY - }, - { } /* terminator */ -}; - -static struct i810_card *devs = NULL; - -static int i810_open_mixdev(struct inode *inode, struct file *file); -static int i810_ioctl_mixdev(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); -static u16 i810_ac97_get(struct ac97_codec *dev, u8 reg); -static void i810_ac97_set(struct ac97_codec *dev, u8 reg, u16 data); -static u16 i810_ac97_get_mmio(struct ac97_codec *dev, u8 reg); -static void i810_ac97_set_mmio(struct ac97_codec *dev, u8 reg, u16 data); -static u16 i810_ac97_get_io(struct ac97_codec *dev, u8 reg); -static void i810_ac97_set_io(struct ac97_codec *dev, u8 reg, u16 data); - -static struct i810_channel *i810_alloc_pcm_channel(struct i810_card *card) -{ - if(card->channel[1].used==1) - return NULL; - card->channel[1].used=1; - return &card->channel[1]; -} - -static struct i810_channel *i810_alloc_rec_pcm_channel(struct i810_card *card) -{ - if(card->channel[0].used==1) - return NULL; - card->channel[0].used=1; - return &card->channel[0]; -} - -static struct i810_channel *i810_alloc_rec_mic_channel(struct i810_card *card) -{ - if(card->channel[2].used==1) - return NULL; - card->channel[2].used=1; - return &card->channel[2]; -} - -static void i810_free_pcm_channel(struct i810_card *card, int channel) -{ - card->channel[channel].used=0; -} - -static int i810_valid_spdif_rate ( struct ac97_codec *codec, int rate ) -{ - unsigned long id = 0L; - - id = (i810_ac97_get(codec, AC97_VENDOR_ID1) << 16); - id |= i810_ac97_get(codec, AC97_VENDOR_ID2) & 0xffff; -#ifdef DEBUG - printk ( "i810_audio: codec = %s, codec_id = 0x%08lx\n", codec->name, id); -#endif - switch ( id ) { - case 0x41445361: /* AD1886 */ - if (rate == 48000) { - return 1; - } - break; - default: /* all other codecs, until we know otherwiae */ - if (rate == 48000 || rate == 44100 || rate == 32000) { - return 1; - } - break; - } - return (0); -} - -/* i810_set_spdif_output - * - * Configure the S/PDIF output transmitter. When we turn on - * S/PDIF, we turn off the analog output. This may not be - * the right thing to do. - * - * Assumptions: - * The DSP sample rate must already be set to a supported - * S/PDIF rate (32kHz, 44.1kHz, or 48kHz) or we abort. - */ -static int i810_set_spdif_output(struct i810_state *state, int slots, int rate) -{ - int vol; - int aud_reg; - int r = 0; - struct ac97_codec *codec = state->card->ac97_codec[0]; - - if(!codec->codec_ops->digital) { - state->card->ac97_status &= ~SPDIF_ON; - } else { - if ( slots == -1 ) { /* Turn off S/PDIF */ - codec->codec_ops->digital(codec, 0, 0, 0); - /* If the volume wasn't muted before we turned on S/PDIF, unmute it */ - if ( !(state->card->ac97_status & VOL_MUTED) ) { - aud_reg = i810_ac97_get(codec, AC97_MASTER_VOL_STEREO); - i810_ac97_set(codec, AC97_MASTER_VOL_STEREO, (aud_reg & ~VOL_MUTED)); - } - state->card->ac97_status &= ~(VOL_MUTED | SPDIF_ON); - return 0; - } - - vol = i810_ac97_get(codec, AC97_MASTER_VOL_STEREO); - state->card->ac97_status = vol & VOL_MUTED; - - r = codec->codec_ops->digital(codec, slots, rate, 0); - - if(r) - state->card->ac97_status |= SPDIF_ON; - else - state->card->ac97_status &= ~SPDIF_ON; - - /* Mute the analog output */ - /* Should this only mute the PCM volume??? */ - i810_ac97_set(codec, AC97_MASTER_VOL_STEREO, (vol | VOL_MUTED)); - } - return r; -} - -/* i810_set_dac_channels - * - * Configure the codec's multi-channel DACs - * - * The logic is backwards. Setting the bit to 1 turns off the DAC. - * - * What about the ICH? We currently configure it using the - * SNDCTL_DSP_CHANNELS ioctl. If we're turnning on the DAC, - * does that imply that we want the ICH set to support - * these channels? - * - * TODO: - * vailidate that the codec really supports these DACs - * before turning them on. - */ -static void i810_set_dac_channels(struct i810_state *state, int channel) -{ - int aud_reg; - struct ac97_codec *codec = state->card->ac97_codec[0]; - - /* No codec, no setup */ - - if(codec == NULL) - return; - - aud_reg = i810_ac97_get(codec, AC97_EXTENDED_STATUS); - aud_reg |= AC97_EA_PRI | AC97_EA_PRJ | AC97_EA_PRK; - state->card->ac97_status &= ~(SURR_ON | CENTER_LFE_ON); - - switch ( channel ) { - case 2: /* always enabled */ - break; - case 4: - aud_reg &= ~AC97_EA_PRJ; - state->card->ac97_status |= SURR_ON; - break; - case 6: - aud_reg &= ~(AC97_EA_PRJ | AC97_EA_PRI | AC97_EA_PRK); - state->card->ac97_status |= SURR_ON | CENTER_LFE_ON; - break; - default: - break; - } - i810_ac97_set(codec, AC97_EXTENDED_STATUS, aud_reg); - -} - - -/* set playback sample rate */ -static unsigned int i810_set_dac_rate(struct i810_state * state, unsigned int rate) -{ - struct dmabuf *dmabuf = &state->dmabuf; - u32 new_rate; - struct ac97_codec *codec=state->card->ac97_codec[0]; - - if(!(state->card->ac97_features&0x0001)) - { - dmabuf->rate = clocking; -#ifdef DEBUG - printk("Asked for %d Hz, but ac97_features says we only do %dHz. Sorry!\n", - rate,clocking); -#endif - return clocking; - } - - if (rate > 48000) - rate = 48000; - if (rate < 8000) - rate = 8000; - dmabuf->rate = rate; - - /* - * Adjust for misclocked crap - */ - rate = ( rate * clocking)/48000; - if(strict_clocking && rate < 8000) { - rate = 8000; - dmabuf->rate = (rate * 48000)/clocking; - } - - new_rate=ac97_set_dac_rate(codec, rate); - if(new_rate != rate) { - dmabuf->rate = (new_rate * 48000)/clocking; - } -#ifdef DEBUG - printk("i810_audio: called i810_set_dac_rate : asked for %d, got %d\n", rate, dmabuf->rate); -#endif - rate = new_rate; - return dmabuf->rate; -} - -/* set recording sample rate */ -static unsigned int i810_set_adc_rate(struct i810_state * state, unsigned int rate) -{ - struct dmabuf *dmabuf = &state->dmabuf; - u32 new_rate; - struct ac97_codec *codec=state->card->ac97_codec[0]; - - if(!(state->card->ac97_features&0x0001)) - { - dmabuf->rate = clocking; - return clocking; - } - - if (rate > 48000) - rate = 48000; - if (rate < 8000) - rate = 8000; - dmabuf->rate = rate; - - /* - * Adjust for misclocked crap - */ - - rate = ( rate * clocking)/48000; - if(strict_clocking && rate < 8000) { - rate = 8000; - dmabuf->rate = (rate * 48000)/clocking; - } - - new_rate = ac97_set_adc_rate(codec, rate); - - if(new_rate != rate) { - dmabuf->rate = (new_rate * 48000)/clocking; - rate = new_rate; - } -#ifdef DEBUG - printk("i810_audio: called i810_set_adc_rate : rate = %d/%d\n", dmabuf->rate, rate); -#endif - return dmabuf->rate; -} - -/* get current playback/recording dma buffer pointer (byte offset from LBA), - called with spinlock held! */ - -static inline unsigned i810_get_dma_addr(struct i810_state *state, int rec) -{ - struct dmabuf *dmabuf = &state->dmabuf; - unsigned int civ, offset, port, port_picb, bytes = 2; - - if (!dmabuf->enable) - return 0; - - if (rec) - port = dmabuf->read_channel->port; - else - port = dmabuf->write_channel->port; - - if(state->card->pci_id == PCI_DEVICE_ID_SI_7012) { - port_picb = port + OFF_SR; - bytes = 1; - } else - port_picb = port + OFF_PICB; - - do { - civ = GET_CIV(state->card, port); - offset = I810_IOREADW(state->card, port_picb); - /* Must have a delay here! */ - if(offset == 0) - udelay(1); - /* Reread both registers and make sure that that total - * offset from the first reading to the second is 0. - * There is an issue with SiS hardware where it will count - * picb down to 0, then update civ to the next value, - * then set the new picb to fragsize bytes. We can catch - * it between the civ update and the picb update, making - * it look as though we are 1 fragsize ahead of where we - * are. The next to we get the address though, it will - * be back in the right place, and we will suddenly think - * we just went forward dmasize - fragsize bytes, causing - * totally stupid *huge* dma overrun messages. We are - * assuming that the 1us delay is more than long enough - * that we won't have to worry about the chip still being - * out of sync with reality ;-) - */ - } while (civ != GET_CIV(state->card, port) || offset != I810_IOREADW(state->card, port_picb)); - - return (((civ + 1) * dmabuf->fragsize - (bytes * offset)) - % dmabuf->dmasize); -} - -/* Stop recording (lock held) */ -static inline void __stop_adc(struct i810_state *state) -{ - struct dmabuf *dmabuf = &state->dmabuf; - struct i810_card *card = state->card; - - dmabuf->enable &= ~ADC_RUNNING; - I810_IOWRITEB(0, card, PI_CR); - // wait for the card to acknowledge shutdown - while( I810_IOREADB(card, PI_CR) != 0 ) ; - // now clear any latent interrupt bits (like the halt bit) - if(card->pci_id == PCI_DEVICE_ID_SI_7012) - I810_IOWRITEB( I810_IOREADB(card, PI_PICB), card, PI_PICB ); - else - I810_IOWRITEB( I810_IOREADB(card, PI_SR), card, PI_SR ); - I810_IOWRITEL( I810_IOREADL(card, GLOB_STA) & INT_PI, card, GLOB_STA); -} - -static void stop_adc(struct i810_state *state) -{ - struct i810_card *card = state->card; - unsigned long flags; - - spin_lock_irqsave(&card->lock, flags); - __stop_adc(state); - spin_unlock_irqrestore(&card->lock, flags); -} - -static inline void __start_adc(struct i810_state *state) -{ - struct dmabuf *dmabuf = &state->dmabuf; - - if (dmabuf->count < dmabuf->dmasize && dmabuf->ready && !dmabuf->enable && - (dmabuf->trigger & PCM_ENABLE_INPUT)) { - dmabuf->enable |= ADC_RUNNING; - // Interrupt enable, LVI enable, DMA enable - I810_IOWRITEB(0x10 | 0x04 | 0x01, state->card, PI_CR); - } -} - -static void start_adc(struct i810_state *state) -{ - struct i810_card *card = state->card; - unsigned long flags; - - spin_lock_irqsave(&card->lock, flags); - __start_adc(state); - spin_unlock_irqrestore(&card->lock, flags); -} - -/* stop playback (lock held) */ -static inline void __stop_dac(struct i810_state *state) -{ - struct dmabuf *dmabuf = &state->dmabuf; - struct i810_card *card = state->card; - - dmabuf->enable &= ~DAC_RUNNING; - I810_IOWRITEB(0, card, PO_CR); - // wait for the card to acknowledge shutdown - while( I810_IOREADB(card, PO_CR) != 0 ) ; - // now clear any latent interrupt bits (like the halt bit) - if(card->pci_id == PCI_DEVICE_ID_SI_7012) - I810_IOWRITEB( I810_IOREADB(card, PO_PICB), card, PO_PICB ); - else - I810_IOWRITEB( I810_IOREADB(card, PO_SR), card, PO_SR ); - I810_IOWRITEL( I810_IOREADL(card, GLOB_STA) & INT_PO, card, GLOB_STA); -} - -static void stop_dac(struct i810_state *state) -{ - struct i810_card *card = state->card; - unsigned long flags; - - spin_lock_irqsave(&card->lock, flags); - __stop_dac(state); - spin_unlock_irqrestore(&card->lock, flags); -} - -static inline void __start_dac(struct i810_state *state) -{ - struct dmabuf *dmabuf = &state->dmabuf; - - if (dmabuf->count > 0 && dmabuf->ready && !dmabuf->enable && - (dmabuf->trigger & PCM_ENABLE_OUTPUT)) { - dmabuf->enable |= DAC_RUNNING; - // Interrupt enable, LVI enable, DMA enable - I810_IOWRITEB(0x10 | 0x04 | 0x01, state->card, PO_CR); - } -} -static void start_dac(struct i810_state *state) -{ - struct i810_card *card = state->card; - unsigned long flags; - - spin_lock_irqsave(&card->lock, flags); - __start_dac(state); - spin_unlock_irqrestore(&card->lock, flags); -} - -#define DMABUF_DEFAULTORDER (16-PAGE_SHIFT) -#define DMABUF_MINORDER 1 - -/* allocate DMA buffer, playback and recording buffer should be allocated separately */ -static int alloc_dmabuf(struct i810_state *state) -{ - struct dmabuf *dmabuf = &state->dmabuf; - void *rawbuf= NULL; - int order, size; - struct page *page, *pend; - - /* If we don't have any oss frag params, then use our default ones */ - if(dmabuf->ossmaxfrags == 0) - dmabuf->ossmaxfrags = 4; - if(dmabuf->ossfragsize == 0) - dmabuf->ossfragsize = (PAGE_SIZE<<DMABUF_DEFAULTORDER)/dmabuf->ossmaxfrags; - size = dmabuf->ossfragsize * dmabuf->ossmaxfrags; - - if(dmabuf->rawbuf && (PAGE_SIZE << dmabuf->buforder) == size) - return 0; - /* alloc enough to satisfy the oss params */ - for (order = DMABUF_DEFAULTORDER; order >= DMABUF_MINORDER; order--) { - if ( (PAGE_SIZE<<order) > size ) - continue; - if ((rawbuf = pci_alloc_consistent(state->card->pci_dev, - PAGE_SIZE << order, - &dmabuf->dma_handle))) - break; - } - if (!rawbuf) - return -ENOMEM; - - -#ifdef DEBUG - printk("i810_audio: allocated %ld (order = %d) bytes at %p\n", - PAGE_SIZE << order, order, rawbuf); -#endif - - dmabuf->ready = dmabuf->mapped = 0; - dmabuf->rawbuf = rawbuf; - dmabuf->buforder = order; - - /* now mark the pages as reserved; otherwise remap_pfn_range doesn't do what we want */ - pend = virt_to_page(rawbuf + (PAGE_SIZE << order) - 1); - for (page = virt_to_page(rawbuf); page <= pend; page++) - SetPageReserved(page); - - return 0; -} - -/* free DMA buffer */ -static void dealloc_dmabuf(struct i810_state *state) -{ - struct dmabuf *dmabuf = &state->dmabuf; - struct page *page, *pend; - - if (dmabuf->rawbuf) { - /* undo marking the pages as reserved */ - pend = virt_to_page(dmabuf->rawbuf + (PAGE_SIZE << dmabuf->buforder) - 1); - for (page = virt_to_page(dmabuf->rawbuf); page <= pend; page++) - ClearPageReserved(page); - pci_free_consistent(state->card->pci_dev, PAGE_SIZE << dmabuf->buforder, - dmabuf->rawbuf, dmabuf->dma_handle); - } - dmabuf->rawbuf = NULL; - dmabuf->mapped = dmabuf->ready = 0; -} - -static int prog_dmabuf(struct i810_state *state, unsigned rec) -{ - struct dmabuf *dmabuf = &state->dmabuf; - struct i810_channel *c; - struct sg_item *sg; - unsigned long flags; - int ret; - unsigned fragint; - int i; - - spin_lock_irqsave(&state->card->lock, flags); - if(dmabuf->enable & DAC_RUNNING) - __stop_dac(state); - if(dmabuf->enable & ADC_RUNNING) - __stop_adc(state); - dmabuf->total_bytes = 0; - dmabuf->count = dmabuf->error = 0; - dmabuf->swptr = dmabuf->hwptr = 0; - spin_unlock_irqrestore(&state->card->lock, flags); - - /* allocate DMA buffer, let alloc_dmabuf determine if we are already - * allocated well enough or if we should replace the current buffer - * (assuming one is already allocated, if it isn't, then allocate it). - */ - if ((ret = alloc_dmabuf(state))) - return ret; - - /* FIXME: figure out all this OSS fragment stuff */ - /* I did, it now does what it should according to the OSS API. DL */ - /* We may not have realloced our dmabuf, but the fragment size to - * fragment number ratio may have changed, so go ahead and reprogram - * things - */ - dmabuf->dmasize = PAGE_SIZE << dmabuf->buforder; - dmabuf->numfrag = SG_LEN; - dmabuf->fragsize = dmabuf->dmasize/dmabuf->numfrag; - dmabuf->fragsamples = dmabuf->fragsize >> 1; - dmabuf->fragshift = ffs(dmabuf->fragsize) - 1; - dmabuf->userfragsize = dmabuf->ossfragsize; - dmabuf->userfrags = dmabuf->dmasize/dmabuf->ossfragsize; - - memset(dmabuf->rawbuf, 0, dmabuf->dmasize); - - if(dmabuf->ossmaxfrags == 4) { - fragint = 8; - } else if (dmabuf->ossmaxfrags == 8) { - fragint = 4; - } else if (dmabuf->ossmaxfrags == 16) { - fragint = 2; - } else { - fragint = 1; - } - /* - * Now set up the ring - */ - if(dmabuf->read_channel) - c = dmabuf->read_channel; - else - c = dmabuf->write_channel; - while(c != NULL) { - sg=&c->sg[0]; - /* - * Load up 32 sg entries and take an interrupt at half - * way (we might want more interrupts later..) - */ - - for(i=0;i<dmabuf->numfrag;i++) - { - sg->busaddr=(u32)dmabuf->dma_handle+dmabuf->fragsize*i; - // the card will always be doing 16bit stereo - sg->control=dmabuf->fragsamples; - if(state->card->pci_id == PCI_DEVICE_ID_SI_7012) - sg->control <<= 1; - sg->control|=CON_BUFPAD; - // set us up to get IOC interrupts as often as needed to - // satisfy numfrag requirements, no more - if( ((i+1) % fragint) == 0) { - sg->control|=CON_IOC; - } - sg++; - } - spin_lock_irqsave(&state->card->lock, flags); - I810_IOWRITEB(2, state->card, c->port+OFF_CR); /* reset DMA machine */ - while( I810_IOREADB(state->card, c->port+OFF_CR) & 0x02 ) ; - I810_IOWRITEL((u32)state->card->chandma + - c->num*sizeof(struct i810_channel), - state->card, c->port+OFF_BDBAR); - CIV_TO_LVI(state->card, c->port, 0); - - spin_unlock_irqrestore(&state->card->lock, flags); - - if(c != dmabuf->write_channel) - c = dmabuf->write_channel; - else - c = NULL; - } - - /* set the ready flag for the dma buffer */ - dmabuf->ready = 1; - -#ifdef DEBUG - printk("i810_audio: prog_dmabuf, sample rate = %d, format = %d,\n\tnumfrag = %d, " - "fragsize = %d dmasize = %d\n", - dmabuf->rate, dmabuf->fmt, dmabuf->numfrag, - dmabuf->fragsize, dmabuf->dmasize); -#endif - - return 0; -} - -static void __i810_update_lvi(struct i810_state *state, int rec) -{ - struct dmabuf *dmabuf = &state->dmabuf; - int x, port; - int trigger; - int count, fragsize; - void (*start)(struct i810_state *); - - count = dmabuf->count; - if (rec) { - port = dmabuf->read_channel->port; - trigger = PCM_ENABLE_INPUT; - start = __start_adc; - count = dmabuf->dmasize - count; - } else { - port = dmabuf->write_channel->port; - trigger = PCM_ENABLE_OUTPUT; - start = __start_dac; - } - - /* Do not process partial fragments. */ - fragsize = dmabuf->fragsize; - if (count < fragsize) - return; - - /* if we are currently stopped, then our CIV is actually set to our - * *last* sg segment and we are ready to wrap to the next. However, - * if we set our LVI to the last sg segment, then it won't wrap to - * the next sg segment, it won't even get a start. So, instead, when - * we are stopped, we set both the LVI value and also we increment - * the CIV value to the next sg segment to be played so that when - * we call start, things will operate properly. Since the CIV can't - * be written to directly for this purpose, we set the LVI to CIV + 1 - * temporarily. Once the engine has started we set the LVI to its - * final value. - */ - if (!dmabuf->enable && dmabuf->ready) { - if (!(dmabuf->trigger & trigger)) - return; - - CIV_TO_LVI(state->card, port, 1); - - start(state); - while (!(I810_IOREADB(state->card, port + OFF_CR) & ((1<<4) | (1<<2)))) - ; - } - - /* MASKP2(swptr, fragsize) - 1 is the tail of our transfer */ - x = MODULOP2(MASKP2(dmabuf->swptr, fragsize) - 1, dmabuf->dmasize); - x >>= dmabuf->fragshift; - I810_IOWRITEB(x, state->card, port + OFF_LVI); -} - -static void i810_update_lvi(struct i810_state *state, int rec) -{ - struct dmabuf *dmabuf = &state->dmabuf; - unsigned long flags; - - if(!dmabuf->ready) - return; - spin_lock_irqsave(&state->card->lock, flags); - __i810_update_lvi(state, rec); - spin_unlock_irqrestore(&state->card->lock, flags); -} - -/* update buffer manangement pointers, especially, dmabuf->count and dmabuf->hwptr */ -static void i810_update_ptr(struct i810_state *state) -{ - struct dmabuf *dmabuf = &state->dmabuf; - unsigned hwptr; - unsigned fragmask, dmamask; - int diff; - - fragmask = MASKP2(~0, dmabuf->fragsize); - dmamask = MODULOP2(~0, dmabuf->dmasize); - - /* error handling and process wake up for ADC */ - if (dmabuf->enable == ADC_RUNNING) { - /* update hardware pointer */ - hwptr = i810_get_dma_addr(state, 1) & fragmask; - diff = (hwptr - dmabuf->hwptr) & dmamask; -#if defined(DEBUG_INTERRUPTS) || defined(DEBUG_MMAP) - printk("ADC HWP %d,%d,%d\n", hwptr, dmabuf->hwptr, diff); -#endif - dmabuf->hwptr = hwptr; - dmabuf->total_bytes += diff; - dmabuf->count += diff; - if (dmabuf->count > dmabuf->dmasize) { - /* buffer underrun or buffer overrun */ - /* this is normal for the end of a read */ - /* only give an error if we went past the */ - /* last valid sg entry */ - if (GET_CIV(state->card, PI_BASE) != - GET_LVI(state->card, PI_BASE)) { - printk(KERN_WARNING "i810_audio: DMA overrun on read\n"); - dmabuf->error++; - } - } - if (diff) - wake_up(&dmabuf->wait); - } - /* error handling and process wake up for DAC */ - if (dmabuf->enable == DAC_RUNNING) { - /* update hardware pointer */ - hwptr = i810_get_dma_addr(state, 0) & fragmask; - diff = (hwptr - dmabuf->hwptr) & dmamask; -#if defined(DEBUG_INTERRUPTS) || defined(DEBUG_MMAP) - printk("DAC HWP %d,%d,%d\n", hwptr, dmabuf->hwptr, diff); -#endif - dmabuf->hwptr = hwptr; - dmabuf->total_bytes += diff; - dmabuf->count -= diff; - if (dmabuf->count < 0) { - /* buffer underrun or buffer overrun */ - /* this is normal for the end of a write */ - /* only give an error if we went past the */ - /* last valid sg entry */ - if (GET_CIV(state->card, PO_BASE) != - GET_LVI(state->card, PO_BASE)) { - printk(KERN_WARNING "i810_audio: DMA overrun on write\n"); - printk("i810_audio: CIV %d, LVI %d, hwptr %x, " - "count %d\n", - GET_CIV(state->card, PO_BASE), - GET_LVI(state->card, PO_BASE), - dmabuf->hwptr, dmabuf->count); - dmabuf->error++; - } - } - if (diff) - wake_up(&dmabuf->wait); - } -} - -static inline int i810_get_free_write_space(struct i810_state *state) -{ - struct dmabuf *dmabuf = &state->dmabuf; - int free; - - i810_update_ptr(state); - // catch underruns during playback - if (dmabuf->count < 0) { - dmabuf->count = 0; - dmabuf->swptr = dmabuf->hwptr; - } - free = dmabuf->dmasize - dmabuf->count; - if(free < 0) - return(0); - return(free); -} - -static inline int i810_get_available_read_data(struct i810_state *state) -{ - struct dmabuf *dmabuf = &state->dmabuf; - int avail; - - i810_update_ptr(state); - // catch overruns during record - if (dmabuf->count > dmabuf->dmasize) { - dmabuf->count = dmabuf->dmasize; - dmabuf->swptr = dmabuf->hwptr; - } - avail = dmabuf->count; - if(avail < 0) - return(0); - return(avail); -} - -static inline void fill_partial_frag(struct dmabuf *dmabuf) -{ - unsigned fragsize; - unsigned swptr, len; - - fragsize = dmabuf->fragsize; - swptr = dmabuf->swptr; - len = fragsize - MODULOP2(dmabuf->swptr, fragsize); - if (len == fragsize) - return; - - memset(dmabuf->rawbuf + swptr, '\0', len); - dmabuf->swptr = MODULOP2(swptr + len, dmabuf->dmasize); - dmabuf->count += len; -} - -static int drain_dac(struct i810_state *state, int signals_allowed) -{ - DECLARE_WAITQUEUE(wait, current); - struct dmabuf *dmabuf = &state->dmabuf; - unsigned long flags; - unsigned long tmo; - int count; - - if (!dmabuf->ready) - return 0; - if(dmabuf->mapped) { - stop_dac(state); - return 0; - } - - spin_lock_irqsave(&state->card->lock, flags); - - fill_partial_frag(dmabuf); - - /* - * This will make sure that our LVI is correct, that our - * pointer is updated, and that the DAC is running. We - * have to force the setting of dmabuf->trigger to avoid - * any possible deadlocks. - */ - dmabuf->trigger = PCM_ENABLE_OUTPUT; - __i810_update_lvi(state, 0); - - spin_unlock_irqrestore(&state->card->lock, flags); - - add_wait_queue(&dmabuf->wait, &wait); - for (;;) { - - spin_lock_irqsave(&state->card->lock, flags); - i810_update_ptr(state); - count = dmabuf->count; - - /* It seems that we have to set the current state to - * TASK_INTERRUPTIBLE every time to make the process - * really go to sleep. This also has to be *after* the - * update_ptr() call because update_ptr is likely to - * do a wake_up() which will unset this before we ever - * try to sleep, resuling in a tight loop in this code - * instead of actually sleeping and waiting for an - * interrupt to wake us up! - */ - __set_current_state(signals_allowed ? - TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE); - spin_unlock_irqrestore(&state->card->lock, flags); - - if (count <= 0) - break; - - if (signal_pending(current) && signals_allowed) { - break; - } - - /* - * set the timeout to significantly longer than it *should* - * take for the DAC to drain the DMA buffer - */ - tmo = (count * HZ) / (dmabuf->rate); - if (!schedule_timeout(tmo >= 2 ? tmo : 2)){ - printk(KERN_ERR "i810_audio: drain_dac, dma timeout?\n"); - count = 0; - break; - } - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&dmabuf->wait, &wait); - if(count > 0 && signal_pending(current) && signals_allowed) - return -ERESTARTSYS; - stop_dac(state); - return 0; -} - -static void i810_channel_interrupt(struct i810_card *card) -{ - int i, count; - -#ifdef DEBUG_INTERRUPTS - printk("CHANNEL "); -#endif - for(i=0;i<NR_HW_CH;i++) - { - struct i810_state *state = card->states[i]; - struct i810_channel *c; - struct dmabuf *dmabuf; - unsigned long port; - u16 status; - - if(!state) - continue; - if(!state->dmabuf.ready) - continue; - dmabuf = &state->dmabuf; - if(dmabuf->enable & DAC_RUNNING) { - c=dmabuf->write_channel; - } else if(dmabuf->enable & ADC_RUNNING) { - c=dmabuf->read_channel; - } else /* This can occur going from R/W to close */ - continue; - - port = c->port; - - if(card->pci_id == PCI_DEVICE_ID_SI_7012) - status = I810_IOREADW(card, port + OFF_PICB); - else - status = I810_IOREADW(card, port + OFF_SR); - -#ifdef DEBUG_INTERRUPTS - printk("NUM %d PORT %X IRQ ( ST%d ", c->num, c->port, status); -#endif - if(status & DMA_INT_COMPLETE) - { - /* only wake_up() waiters if this interrupt signals - * us being beyond a userfragsize of data open or - * available, and i810_update_ptr() does that for - * us - */ - i810_update_ptr(state); -#ifdef DEBUG_INTERRUPTS - printk("COMP %d ", dmabuf->hwptr / - dmabuf->fragsize); -#endif - } - if(status & (DMA_INT_LVI | DMA_INT_DCH)) - { - /* wake_up() unconditionally on LVI and DCH */ - i810_update_ptr(state); - wake_up(&dmabuf->wait); -#ifdef DEBUG_INTERRUPTS - if(status & DMA_INT_LVI) - printk("LVI "); - if(status & DMA_INT_DCH) - printk("DCH -"); -#endif - count = dmabuf->count; - if(dmabuf->enable & ADC_RUNNING) - count = dmabuf->dmasize - count; - if (count >= (int)dmabuf->fragsize) { - I810_IOWRITEB(I810_IOREADB(card, port+OFF_CR) | 1, card, port+OFF_CR); -#ifdef DEBUG_INTERRUPTS - printk(" CONTINUE "); -#endif - } else { - if (dmabuf->enable & DAC_RUNNING) - __stop_dac(state); - if (dmabuf->enable & ADC_RUNNING) - __stop_adc(state); - dmabuf->enable = 0; -#ifdef DEBUG_INTERRUPTS - printk(" STOP "); -#endif - } - } - if(card->pci_id == PCI_DEVICE_ID_SI_7012) - I810_IOWRITEW(status & DMA_INT_MASK, card, port + OFF_PICB); - else - I810_IOWRITEW(status & DMA_INT_MASK, card, port + OFF_SR); - } -#ifdef DEBUG_INTERRUPTS - printk(")\n"); -#endif -} - -static irqreturn_t i810_interrupt(int irq, void *dev_id) -{ - struct i810_card *card = dev_id; - u32 status; - - spin_lock(&card->lock); - - status = I810_IOREADL(card, GLOB_STA); - - if(!(status & INT_MASK)) - { - spin_unlock(&card->lock); - return IRQ_NONE; /* not for us */ - } - - if(status & (INT_PO|INT_PI|INT_MC)) - i810_channel_interrupt(card); - - /* clear 'em */ - I810_IOWRITEL(status & INT_MASK, card, GLOB_STA); - spin_unlock(&card->lock); - return IRQ_HANDLED; -} - -/* in this loop, dmabuf.count signifies the amount of data that is - waiting to be copied to the user's buffer. It is filled by the dma - machine and drained by this loop. */ - -static ssize_t i810_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) -{ - struct i810_state *state = (struct i810_state *)file->private_data; - struct i810_card *card=state ? state->card : NULL; - struct dmabuf *dmabuf = &state->dmabuf; - ssize_t ret; - unsigned long flags; - unsigned int swptr; - int cnt; - int pending; - DECLARE_WAITQUEUE(waita, current); - -#ifdef DEBUG2 - printk("i810_audio: i810_read called, count = %d\n", count); -#endif - - if (dmabuf->mapped) - return -ENXIO; - if (dmabuf->enable & DAC_RUNNING) - return -ENODEV; - if (!dmabuf->read_channel) { - dmabuf->ready = 0; - dmabuf->read_channel = card->alloc_rec_pcm_channel(card); - if (!dmabuf->read_channel) { - return -EBUSY; - } - } - if (!dmabuf->ready && (ret = prog_dmabuf(state, 1))) - return ret; - if (!access_ok(VERIFY_WRITE, buffer, count)) - return -EFAULT; - ret = 0; - - pending = 0; - - add_wait_queue(&dmabuf->wait, &waita); - while (count > 0) { - set_current_state(TASK_INTERRUPTIBLE); - spin_lock_irqsave(&card->lock, flags); - if (PM_SUSPENDED(card)) { - spin_unlock_irqrestore(&card->lock, flags); - schedule(); - if (signal_pending(current)) { - if (!ret) ret = -EAGAIN; - break; - } - continue; - } - cnt = i810_get_available_read_data(state); - swptr = dmabuf->swptr; - // this is to make the copy_to_user simpler below - if(cnt > (dmabuf->dmasize - swptr)) - cnt = dmabuf->dmasize - swptr; - spin_unlock_irqrestore(&card->lock, flags); - - if (cnt > count) - cnt = count; - if (cnt <= 0) { - unsigned long tmo; - /* - * Don't let us deadlock. The ADC won't start if - * dmabuf->trigger isn't set. A call to SETTRIGGER - * could have turned it off after we set it to on - * previously. - */ - dmabuf->trigger = PCM_ENABLE_INPUT; - /* - * This does three things. Updates LVI to be correct, - * makes sure the ADC is running, and updates the - * hwptr. - */ - i810_update_lvi(state,1); - if (file->f_flags & O_NONBLOCK) { - if (!ret) ret = -EAGAIN; - goto done; - } - /* Set the timeout to how long it would take to fill - * two of our buffers. If we haven't been woke up - * by then, then we know something is wrong. - */ - tmo = (dmabuf->dmasize * HZ * 2) / (dmabuf->rate * 4); - /* There are two situations when sleep_on_timeout returns, one is when - the interrupt is serviced correctly and the process is waked up by - ISR ON TIME. Another is when timeout is expired, which means that - either interrupt is NOT serviced correctly (pending interrupt) or it - is TOO LATE for the process to be scheduled to run (scheduler latency) - which results in a (potential) buffer overrun. And worse, there is - NOTHING we can do to prevent it. */ - if (!schedule_timeout(tmo >= 2 ? tmo : 2)) { -#ifdef DEBUG - printk(KERN_ERR "i810_audio: recording schedule timeout, " - "dmasz %u fragsz %u count %i hwptr %u swptr %u\n", - dmabuf->dmasize, dmabuf->fragsize, dmabuf->count, - dmabuf->hwptr, dmabuf->swptr); -#endif - /* a buffer overrun, we delay the recovery until next time the - while loop begin and we REALLY have space to record */ - } - if (signal_pending(current)) { - ret = ret ? ret : -ERESTARTSYS; - goto done; - } - continue; - } - - if (copy_to_user(buffer, dmabuf->rawbuf + swptr, cnt)) { - if (!ret) ret = -EFAULT; - goto done; - } - - swptr = MODULOP2(swptr + cnt, dmabuf->dmasize); - - spin_lock_irqsave(&card->lock, flags); - - if (PM_SUSPENDED(card)) { - spin_unlock_irqrestore(&card->lock, flags); - continue; - } - dmabuf->swptr = swptr; - pending = dmabuf->count -= cnt; - spin_unlock_irqrestore(&card->lock, flags); - - count -= cnt; - buffer += cnt; - ret += cnt; - } - done: - pending = dmabuf->dmasize - pending; - if (dmabuf->enable || pending >= dmabuf->userfragsize) - i810_update_lvi(state, 1); - set_current_state(TASK_RUNNING); - remove_wait_queue(&dmabuf->wait, &waita); - - return ret; -} - -/* in this loop, dmabuf.count signifies the amount of data that is waiting to be dma to - the soundcard. it is drained by the dma machine and filled by this loop. */ -static ssize_t i810_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) -{ - struct i810_state *state = (struct i810_state *)file->private_data; - struct i810_card *card=state ? state->card : NULL; - struct dmabuf *dmabuf = &state->dmabuf; - ssize_t ret; - unsigned long flags; - unsigned int swptr = 0; - int pending; - int cnt; - DECLARE_WAITQUEUE(waita, current); - -#ifdef DEBUG2 - printk("i810_audio: i810_write called, count = %d\n", count); -#endif - - if (dmabuf->mapped) - return -ENXIO; - if (dmabuf->enable & ADC_RUNNING) - return -ENODEV; - if (!dmabuf->write_channel) { - dmabuf->ready = 0; - dmabuf->write_channel = card->alloc_pcm_channel(card); - if(!dmabuf->write_channel) - return -EBUSY; - } - if (!dmabuf->ready && (ret = prog_dmabuf(state, 0))) - return ret; - if (!access_ok(VERIFY_READ, buffer, count)) - return -EFAULT; - ret = 0; - - pending = 0; - - add_wait_queue(&dmabuf->wait, &waita); - while (count > 0) { - set_current_state(TASK_INTERRUPTIBLE); - spin_lock_irqsave(&state->card->lock, flags); - if (PM_SUSPENDED(card)) { - spin_unlock_irqrestore(&card->lock, flags); - schedule(); - if (signal_pending(current)) { - if (!ret) ret = -EAGAIN; - break; - } - continue; - } - - cnt = i810_get_free_write_space(state); - swptr = dmabuf->swptr; - /* Bound the maximum size to how much we can copy to the - * dma buffer before we hit the end. If we have more to - * copy then it will get done in a second pass of this - * loop starting from the beginning of the buffer. - */ - if(cnt > (dmabuf->dmasize - swptr)) - cnt = dmabuf->dmasize - swptr; - spin_unlock_irqrestore(&state->card->lock, flags); - -#ifdef DEBUG2 - printk(KERN_INFO "i810_audio: i810_write: %d bytes available space\n", cnt); -#endif - if (cnt > count) - cnt = count; - if (cnt <= 0) { - unsigned long tmo; - // There is data waiting to be played - /* - * Force the trigger setting since we would - * deadlock with it set any other way - */ - dmabuf->trigger = PCM_ENABLE_OUTPUT; - i810_update_lvi(state,0); - if (file->f_flags & O_NONBLOCK) { - if (!ret) ret = -EAGAIN; - goto ret; - } - /* Not strictly correct but works */ - tmo = (dmabuf->dmasize * HZ * 2) / (dmabuf->rate * 4); - /* There are two situations when sleep_on_timeout returns, one is when - the interrupt is serviced correctly and the process is waked up by - ISR ON TIME. Another is when timeout is expired, which means that - either interrupt is NOT serviced correctly (pending interrupt) or it - is TOO LATE for the process to be scheduled to run (scheduler latency) - which results in a (potential) buffer underrun. And worse, there is - NOTHING we can do to prevent it. */ - if (!schedule_timeout(tmo >= 2 ? tmo : 2)) { -#ifdef DEBUG - printk(KERN_ERR "i810_audio: playback schedule timeout, " - "dmasz %u fragsz %u count %i hwptr %u swptr %u\n", - dmabuf->dmasize, dmabuf->fragsize, dmabuf->count, - dmabuf->hwptr, dmabuf->swptr); -#endif - /* a buffer underrun, we delay the recovery until next time the - while loop begin and we REALLY have data to play */ - //return ret; - } - if (signal_pending(current)) { - if (!ret) ret = -ERESTARTSYS; - goto ret; - } - continue; - } - if (copy_from_user(dmabuf->rawbuf+swptr,buffer,cnt)) { - if (!ret) ret = -EFAULT; - goto ret; - } - - swptr = MODULOP2(swptr + cnt, dmabuf->dmasize); - - spin_lock_irqsave(&state->card->lock, flags); - if (PM_SUSPENDED(card)) { - spin_unlock_irqrestore(&card->lock, flags); - continue; - } - - dmabuf->swptr = swptr; - pending = dmabuf->count += cnt; - - count -= cnt; - buffer += cnt; - ret += cnt; - spin_unlock_irqrestore(&state->card->lock, flags); - } -ret: - if (dmabuf->enable || pending >= dmabuf->userfragsize) - i810_update_lvi(state, 0); - set_current_state(TASK_RUNNING); - remove_wait_queue(&dmabuf->wait, &waita); - - return ret; -} - -/* No kernel lock - we have our own spinlock */ -static unsigned int i810_poll(struct file *file, struct poll_table_struct *wait) -{ - struct i810_state *state = (struct i810_state *)file->private_data; - struct dmabuf *dmabuf = &state->dmabuf; - unsigned long flags; - unsigned int mask = 0; - - if(!dmabuf->ready) - return 0; - poll_wait(file, &dmabuf->wait, wait); - spin_lock_irqsave(&state->card->lock, flags); - if (dmabuf->enable & ADC_RUNNING || - dmabuf->trigger & PCM_ENABLE_INPUT) { - if (i810_get_available_read_data(state) >= - (signed)dmabuf->userfragsize) - mask |= POLLIN | POLLRDNORM; - } - if (dmabuf->enable & DAC_RUNNING || - dmabuf->trigger & PCM_ENABLE_OUTPUT) { - if (i810_get_free_write_space(state) >= - (signed)dmabuf->userfragsize) - mask |= POLLOUT | POLLWRNORM; - } - spin_unlock_irqrestore(&state->card->lock, flags); - return mask; -} - -static int i810_mmap(struct file *file, struct vm_area_struct *vma) -{ - struct i810_state *state = (struct i810_state *)file->private_data; - struct dmabuf *dmabuf = &state->dmabuf; - int ret = -EINVAL; - unsigned long size; - - lock_kernel(); - if (vma->vm_flags & VM_WRITE) { - if (!dmabuf->write_channel && - (dmabuf->write_channel = - state->card->alloc_pcm_channel(state->card)) == NULL) { - ret = -EBUSY; - goto out; - } - } - if (vma->vm_flags & VM_READ) { - if (!dmabuf->read_channel && - (dmabuf->read_channel = - state->card->alloc_rec_pcm_channel(state->card)) == NULL) { - ret = -EBUSY; - goto out; - } - } - if ((ret = prog_dmabuf(state, 0)) != 0) - goto out; - - ret = -EINVAL; - if (vma->vm_pgoff != 0) - goto out; - size = vma->vm_end - vma->vm_start; - if (size > (PAGE_SIZE << dmabuf->buforder)) - goto out; - ret = -EAGAIN; - if (remap_pfn_range(vma, vma->vm_start, - virt_to_phys(dmabuf->rawbuf) >> PAGE_SHIFT, - size, vma->vm_page_prot)) - goto out; - dmabuf->mapped = 1; - dmabuf->trigger = 0; - ret = 0; -#ifdef DEBUG_MMAP - printk("i810_audio: mmap'ed %ld bytes of data space\n", size); -#endif -out: - unlock_kernel(); - return ret; -} - -static int i810_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -{ - struct i810_state *state = (struct i810_state *)file->private_data; - struct i810_channel *c = NULL; - struct dmabuf *dmabuf = &state->dmabuf; - unsigned long flags; - audio_buf_info abinfo; - count_info cinfo; - unsigned int i_glob_cnt; - int val = 0, ret; - struct ac97_codec *codec = state->card->ac97_codec[0]; - void __user *argp = (void __user *)arg; - int __user *p = argp; - -#ifdef DEBUG - printk("i810_audio: i810_ioctl, arg=0x%x, cmd=", arg ? *p : 0); -#endif - - switch (cmd) - { - case OSS_GETVERSION: -#ifdef DEBUG - printk("OSS_GETVERSION\n"); -#endif - return put_user(SOUND_VERSION, p); - - case SNDCTL_DSP_RESET: -#ifdef DEBUG - printk("SNDCTL_DSP_RESET\n"); -#endif - spin_lock_irqsave(&state->card->lock, flags); - if (dmabuf->enable == DAC_RUNNING) { - c = dmabuf->write_channel; - __stop_dac(state); - } - if (dmabuf->enable == ADC_RUNNING) { - c = dmabuf->read_channel; - __stop_adc(state); - } - if (c != NULL) { - I810_IOWRITEB(2, state->card, c->port+OFF_CR); /* reset DMA machine */ - while ( I810_IOREADB(state->card, c->port+OFF_CR) & 2 ) - cpu_relax(); - I810_IOWRITEL((u32)state->card->chandma + - c->num*sizeof(struct i810_channel), - state->card, c->port+OFF_BDBAR); - CIV_TO_LVI(state->card, c->port, 0); - } - - spin_unlock_irqrestore(&state->card->lock, flags); - synchronize_irq(state->card->pci_dev->irq); - dmabuf->ready = 0; - dmabuf->swptr = dmabuf->hwptr = 0; - dmabuf->count = dmabuf->total_bytes = 0; - return 0; - - case SNDCTL_DSP_SYNC: -#ifdef DEBUG - printk("SNDCTL_DSP_SYNC\n"); -#endif - if (dmabuf->enable != DAC_RUNNING || file->f_flags & O_NONBLOCK) - return 0; - if((val = drain_dac(state, 1))) - return val; - dmabuf->total_bytes = 0; - return 0; - - case SNDCTL_DSP_SPEED: /* set smaple rate */ -#ifdef DEBUG - printk("SNDCTL_DSP_SPEED\n"); -#endif - if (get_user(val, p)) - return -EFAULT; - if (val >= 0) { - if (file->f_mode & FMODE_WRITE) { - if ( (state->card->ac97_status & SPDIF_ON) ) { /* S/PDIF Enabled */ - /* AD1886 only supports 48000, need to check that */ - if ( i810_valid_spdif_rate ( codec, val ) ) { - /* Set DAC rate */ - i810_set_spdif_output ( state, -1, 0 ); - stop_dac(state); - dmabuf->ready = 0; - spin_lock_irqsave(&state->card->lock, flags); - i810_set_dac_rate(state, val); - spin_unlock_irqrestore(&state->card->lock, flags); - /* Set S/PDIF transmitter rate. */ - i810_set_spdif_output ( state, AC97_EA_SPSA_3_4, val ); - if ( ! (state->card->ac97_status & SPDIF_ON) ) { - val = dmabuf->rate; - } - } else { /* Not a valid rate for S/PDIF, ignore it */ - val = dmabuf->rate; - } - } else { - stop_dac(state); - dmabuf->ready = 0; - spin_lock_irqsave(&state->card->lock, flags); - i810_set_dac_rate(state, val); - spin_unlock_irqrestore(&state->card->lock, flags); - } - } - if (file->f_mode & FMODE_READ) { - stop_adc(state); - dmabuf->ready = 0; - spin_lock_irqsave(&state->card->lock, flags); - i810_set_adc_rate(state, val); - spin_unlock_irqrestore(&state->card->lock, flags); - } - } - return put_user(dmabuf->rate, p); - - case SNDCTL_DSP_STEREO: /* set stereo or mono channel */ -#ifdef DEBUG - printk("SNDCTL_DSP_STEREO\n"); -#endif - if (dmabuf->enable & DAC_RUNNING) { - stop_dac(state); - } - if (dmabuf->enable & ADC_RUNNING) { - stop_adc(state); - } - return put_user(1, p); - - case SNDCTL_DSP_GETBLKSIZE: - if (file->f_mode & FMODE_WRITE) { - if (!dmabuf->ready && (val = prog_dmabuf(state, 0))) - return val; - } - if (file->f_mode & FMODE_READ) { - if (!dmabuf->ready && (val = prog_dmabuf(state, 1))) - return val; - } -#ifdef DEBUG - printk("SNDCTL_DSP_GETBLKSIZE %d\n", dmabuf->userfragsize); -#endif - return put_user(dmabuf->userfragsize, p); - - case SNDCTL_DSP_GETFMTS: /* Returns a mask of supported sample format*/ -#ifdef DEBUG - printk("SNDCTL_DSP_GETFMTS\n"); -#endif - return put_user(AFMT_S16_LE, p); - - case SNDCTL_DSP_SETFMT: /* Select sample format */ -#ifdef DEBUG - printk("SNDCTL_DSP_SETFMT\n"); -#endif - return put_user(AFMT_S16_LE, p); - - case SNDCTL_DSP_CHANNELS: -#ifdef DEBUG - printk("SNDCTL_DSP_CHANNELS\n"); -#endif - if (get_user(val, p)) - return -EFAULT; - - if (val > 0) { - if (dmabuf->enable & DAC_RUNNING) { - stop_dac(state); - } - if (dmabuf->enable & ADC_RUNNING) { - stop_adc(state); - } - } else { - return put_user(state->card->channels, p); - } - - /* ICH and ICH0 only support 2 channels */ - if ( state->card->pci_id == PCI_DEVICE_ID_INTEL_82801AA_5 - || state->card->pci_id == PCI_DEVICE_ID_INTEL_82801AB_5) - return put_user(2, p); - - /* Multi-channel support was added with ICH2. Bits in */ - /* Global Status and Global Control register are now */ - /* used to indicate this. */ - - i_glob_cnt = I810_IOREADL(state->card, GLOB_CNT); - - /* Current # of channels enabled */ - if ( i_glob_cnt & 0x0100000 ) - ret = 4; - else if ( i_glob_cnt & 0x0200000 ) - ret = 6; - else - ret = 2; - - switch ( val ) { - case 2: /* 2 channels is always supported */ - I810_IOWRITEL(i_glob_cnt & 0xffcfffff, - state->card, GLOB_CNT); - /* Do we need to change mixer settings???? */ - break; - case 4: /* Supported on some chipsets, better check first */ - if ( state->card->channels >= 4 ) { - I810_IOWRITEL((i_glob_cnt & 0xffcfffff) | 0x100000, - state->card, GLOB_CNT); - /* Do we need to change mixer settings??? */ - } else { - val = ret; - } - break; - case 6: /* Supported on some chipsets, better check first */ - if ( state->card->channels >= 6 ) { - I810_IOWRITEL((i_glob_cnt & 0xffcfffff) | 0x200000, - state->card, GLOB_CNT); - /* Do we need to change mixer settings??? */ - } else { - val = ret; - } - break; - default: /* nothing else is ever supported by the chipset */ - val = ret; - break; - } - - return put_user(val, p); - - case SNDCTL_DSP_POST: /* the user has sent all data and is notifying us */ - /* we update the swptr to the end of the last sg segment then return */ -#ifdef DEBUG - printk("SNDCTL_DSP_POST\n"); -#endif - if(!dmabuf->ready || (dmabuf->enable != DAC_RUNNING)) - return 0; - if((dmabuf->swptr % dmabuf->fragsize) != 0) { - val = dmabuf->fragsize - (dmabuf->swptr % dmabuf->fragsize); - dmabuf->swptr += val; - dmabuf->count += val; - } - return 0; - - case SNDCTL_DSP_SUBDIVIDE: - if (dmabuf->subdivision) - return -EINVAL; - if (get_user(val, p)) - return -EFAULT; - if (val != 1 && val != 2 && val != 4) - return -EINVAL; -#ifdef DEBUG - printk("SNDCTL_DSP_SUBDIVIDE %d\n", val); -#endif - dmabuf->subdivision = val; - dmabuf->ready = 0; - return 0; - - case SNDCTL_DSP_SETFRAGMENT: - if (get_user(val, p)) - return -EFAULT; - - dmabuf->ossfragsize = 1<<(val & 0xffff); - dmabuf->ossmaxfrags = (val >> 16) & 0xffff; - if (!dmabuf->ossfragsize || !dmabuf->ossmaxfrags) - return -EINVAL; - /* - * Bound the frag size into our allowed range of 256 - 4096 - */ - if (dmabuf->ossfragsize < 256) - dmabuf->ossfragsize = 256; - else if (dmabuf->ossfragsize > 4096) - dmabuf->ossfragsize = 4096; - /* - * The numfrags could be something reasonable, or it could - * be 0xffff meaning "Give me as much as possible". So, - * we check the numfrags * fragsize doesn't exceed our - * 64k buffer limit, nor is it less than our 8k minimum. - * If it fails either one of these checks, then adjust the - * number of fragments, not the size of them. It's OK if - * our number of fragments doesn't equal 32 or anything - * like our hardware based number now since we are using - * a different frag count for the hardware. Before we get - * into this though, bound the maxfrags to avoid overflow - * issues. A reasonable bound would be 64k / 256 since our - * maximum buffer size is 64k and our minimum frag size is - * 256. On the other end, our minimum buffer size is 8k and - * our maximum frag size is 4k, so the lower bound should - * be 2. - */ - - if(dmabuf->ossmaxfrags > 256) - dmabuf->ossmaxfrags = 256; - else if (dmabuf->ossmaxfrags < 2) - dmabuf->ossmaxfrags = 2; - - val = dmabuf->ossfragsize * dmabuf->ossmaxfrags; - while (val < 8192) { - val <<= 1; - dmabuf->ossmaxfrags <<= 1; - } - while (val > 65536) { - val >>= 1; - dmabuf->ossmaxfrags >>= 1; - } - dmabuf->ready = 0; -#ifdef DEBUG - printk("SNDCTL_DSP_SETFRAGMENT 0x%x, %d, %d\n", val, - dmabuf->ossfragsize, dmabuf->ossmaxfrags); -#endif - - return 0; - - case SNDCTL_DSP_GETOSPACE: - if (!(file->f_mode & FMODE_WRITE)) - return -EINVAL; - if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0) - return val; - spin_lock_irqsave(&state->card->lock, flags); - i810_update_ptr(state); - abinfo.fragsize = dmabuf->userfragsize; - abinfo.fragstotal = dmabuf->userfrags; - if (dmabuf->mapped) - abinfo.bytes = dmabuf->dmasize; - else - abinfo.bytes = i810_get_free_write_space(state); - abinfo.fragments = abinfo.bytes / dmabuf->userfragsize; - spin_unlock_irqrestore(&state->card->lock, flags); -#if defined(DEBUG) || defined(DEBUG_MMAP) - printk("SNDCTL_DSP_GETOSPACE %d, %d, %d, %d\n", abinfo.bytes, - abinfo.fragsize, abinfo.fragments, abinfo.fragstotal); -#endif - return copy_to_user(argp, &abinfo, sizeof(abinfo)) ? -EFAULT : 0; - - case SNDCTL_DSP_GETOPTR: - if (!(file->f_mode & FMODE_WRITE)) - return -EINVAL; - if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0) - return val; - spin_lock_irqsave(&state->card->lock, flags); - val = i810_get_free_write_space(state); - cinfo.bytes = dmabuf->total_bytes; - cinfo.ptr = dmabuf->hwptr; - cinfo.blocks = val/dmabuf->userfragsize; - if (dmabuf->mapped && (dmabuf->trigger & PCM_ENABLE_OUTPUT)) { - dmabuf->count += val; - dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize; - __i810_update_lvi(state, 0); - } - spin_unlock_irqrestore(&state->card->lock, flags); -#if defined(DEBUG) || defined(DEBUG_MMAP) - printk("SNDCTL_DSP_GETOPTR %d, %d, %d, %d\n", cinfo.bytes, - cinfo.blocks, cinfo.ptr, dmabuf->count); -#endif - return copy_to_user(argp, &cinfo, sizeof(cinfo)) ? -EFAULT : 0; - - case SNDCTL_DSP_GETISPACE: - if (!(file->f_mode & FMODE_READ)) - return -EINVAL; - if (!dmabuf->ready && (val = prog_dmabuf(state, 1)) != 0) - return val; - spin_lock_irqsave(&state->card->lock, flags); - abinfo.bytes = i810_get_available_read_data(state); - abinfo.fragsize = dmabuf->userfragsize; - abinfo.fragstotal = dmabuf->userfrags; - abinfo.fragments = abinfo.bytes / dmabuf->userfragsize; - spin_unlock_irqrestore(&state->card->lock, flags); -#if defined(DEBUG) || defined(DEBUG_MMAP) - printk("SNDCTL_DSP_GETISPACE %d, %d, %d, %d\n", abinfo.bytes, - abinfo.fragsize, abinfo.fragments, abinfo.fragstotal); -#endif - return copy_to_user(argp, &abinfo, sizeof(abinfo)) ? -EFAULT : 0; - - case SNDCTL_DSP_GETIPTR: - if (!(file->f_mode & FMODE_READ)) - return -EINVAL; - if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0) - return val; - spin_lock_irqsave(&state->card->lock, flags); - val = i810_get_available_read_data(state); - cinfo.bytes = dmabuf->total_bytes; - cinfo.blocks = val/dmabuf->userfragsize; - cinfo.ptr = dmabuf->hwptr; - if (dmabuf->mapped && (dmabuf->trigger & PCM_ENABLE_INPUT)) { - dmabuf->count -= val; - dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize; - __i810_update_lvi(state, 1); - } - spin_unlock_irqrestore(&state->card->lock, flags); -#if defined(DEBUG) || defined(DEBUG_MMAP) - printk("SNDCTL_DSP_GETIPTR %d, %d, %d, %d\n", cinfo.bytes, - cinfo.blocks, cinfo.ptr, dmabuf->count); -#endif - return copy_to_user(argp, &cinfo, sizeof(cinfo)) ? -EFAULT : 0; - - case SNDCTL_DSP_NONBLOCK: -#ifdef DEBUG - printk("SNDCTL_DSP_NONBLOCK\n"); -#endif - file->f_flags |= O_NONBLOCK; - return 0; - - case SNDCTL_DSP_GETCAPS: -#ifdef DEBUG - printk("SNDCTL_DSP_GETCAPS\n"); -#endif - return put_user(DSP_CAP_REALTIME|DSP_CAP_TRIGGER|DSP_CAP_MMAP|DSP_CAP_BIND, - p); - - case SNDCTL_DSP_GETTRIGGER: - val = 0; -#ifdef DEBUG - printk("SNDCTL_DSP_GETTRIGGER 0x%x\n", dmabuf->trigger); -#endif - return put_user(dmabuf->trigger, p); - - case SNDCTL_DSP_SETTRIGGER: - if (get_user(val, p)) - return -EFAULT; -#if defined(DEBUG) || defined(DEBUG_MMAP) - printk("SNDCTL_DSP_SETTRIGGER 0x%x\n", val); -#endif - /* silently ignore invalid PCM_ENABLE_xxx bits, - * like the other drivers do - */ - if (!(file->f_mode & FMODE_READ )) - val &= ~PCM_ENABLE_INPUT; - if (!(file->f_mode & FMODE_WRITE )) - val &= ~PCM_ENABLE_OUTPUT; - if((file->f_mode & FMODE_READ) && !(val & PCM_ENABLE_INPUT) && dmabuf->enable == ADC_RUNNING) { - stop_adc(state); - } - if((file->f_mode & FMODE_WRITE) && !(val & PCM_ENABLE_OUTPUT) && dmabuf->enable == DAC_RUNNING) { - stop_dac(state); - } - dmabuf->trigger = val; - if((val & PCM_ENABLE_OUTPUT) && !(dmabuf->enable & DAC_RUNNING)) { - if (!dmabuf->write_channel) { - dmabuf->ready = 0; - dmabuf->write_channel = state->card->alloc_pcm_channel(state->card); - if (!dmabuf->write_channel) - return -EBUSY; - } - if (!dmabuf->ready && (ret = prog_dmabuf(state, 0))) - return ret; - if (dmabuf->mapped) { - spin_lock_irqsave(&state->card->lock, flags); - i810_update_ptr(state); - dmabuf->count = 0; - dmabuf->swptr = dmabuf->hwptr; - dmabuf->count = i810_get_free_write_space(state); - dmabuf->swptr = (dmabuf->swptr + dmabuf->count) % dmabuf->dmasize; - spin_unlock_irqrestore(&state->card->lock, flags); - } - i810_update_lvi(state, 0); - start_dac(state); - } - if((val & PCM_ENABLE_INPUT) && !(dmabuf->enable & ADC_RUNNING)) { - if (!dmabuf->read_channel) { - dmabuf->ready = 0; - dmabuf->read_channel = state->card->alloc_rec_pcm_channel(state->card); - if (!dmabuf->read_channel) - return -EBUSY; - } - if (!dmabuf->ready && (ret = prog_dmabuf(state, 1))) - return ret; - if (dmabuf->mapped) { - spin_lock_irqsave(&state->card->lock, flags); - i810_update_ptr(state); - dmabuf->swptr = dmabuf->hwptr; - dmabuf->count = 0; - spin_unlock_irqrestore(&state->card->lock, flags); - } - i810_update_lvi(state, 1); - start_adc(state); - } - return 0; - - case SNDCTL_DSP_SETDUPLEX: -#ifdef DEBUG - printk("SNDCTL_DSP_SETDUPLEX\n"); -#endif - return -EINVAL; - - case SNDCTL_DSP_GETODELAY: - if (!(file->f_mode & FMODE_WRITE)) - return -EINVAL; - spin_lock_irqsave(&state->card->lock, flags); - i810_update_ptr(state); - val = dmabuf->count; - spin_unlock_irqrestore(&state->card->lock, flags); -#ifdef DEBUG - printk("SNDCTL_DSP_GETODELAY %d\n", dmabuf->count); -#endif - return put_user(val, p); - - case SOUND_PCM_READ_RATE: -#ifdef DEBUG - printk("SOUND_PCM_READ_RATE %d\n", dmabuf->rate); -#endif - return put_user(dmabuf->rate, p); - - case SOUND_PCM_READ_CHANNELS: -#ifdef DEBUG - printk("SOUND_PCM_READ_CHANNELS\n"); -#endif - return put_user(2, p); - - case SOUND_PCM_READ_BITS: -#ifdef DEBUG - printk("SOUND_PCM_READ_BITS\n"); -#endif - return put_user(AFMT_S16_LE, p); - - case SNDCTL_DSP_SETSPDIF: /* Set S/PDIF Control register */ -#ifdef DEBUG - printk("SNDCTL_DSP_SETSPDIF\n"); -#endif - if (get_user(val, p)) - return -EFAULT; - - /* Check to make sure the codec supports S/PDIF transmitter */ - - if((state->card->ac97_features & 4)) { - /* mask out the transmitter speed bits so the user can't set them */ - val &= ~0x3000; - - /* Add the current transmitter speed bits to the passed value */ - ret = i810_ac97_get(codec, AC97_SPDIF_CONTROL); - val |= (ret & 0x3000); - - i810_ac97_set(codec, AC97_SPDIF_CONTROL, val); - if(i810_ac97_get(codec, AC97_SPDIF_CONTROL) != val ) { - printk(KERN_ERR "i810_audio: Unable to set S/PDIF configuration to 0x%04x.\n", val); - return -EFAULT; - } - } -#ifdef DEBUG - else - printk(KERN_WARNING "i810_audio: S/PDIF transmitter not avalible.\n"); -#endif - return put_user(val, p); - - case SNDCTL_DSP_GETSPDIF: /* Get S/PDIF Control register */ -#ifdef DEBUG - printk("SNDCTL_DSP_GETSPDIF\n"); -#endif - if (get_user(val, p)) - return -EFAULT; - - /* Check to make sure the codec supports S/PDIF transmitter */ - - if(!(state->card->ac97_features & 4)) { -#ifdef DEBUG - printk(KERN_WARNING "i810_audio: S/PDIF transmitter not avalible.\n"); -#endif - val = 0; - } else { - val = i810_ac97_get(codec, AC97_SPDIF_CONTROL); - } - //return put_user((val & 0xcfff), p); - return put_user(val, p); - - case SNDCTL_DSP_GETCHANNELMASK: -#ifdef DEBUG - printk("SNDCTL_DSP_GETCHANNELMASK\n"); -#endif - if (get_user(val, p)) - return -EFAULT; - - /* Based on AC'97 DAC support, not ICH hardware */ - val = DSP_BIND_FRONT; - if ( state->card->ac97_features & 0x0004 ) - val |= DSP_BIND_SPDIF; - - if ( state->card->ac97_features & 0x0080 ) - val |= DSP_BIND_SURR; - if ( state->card->ac97_features & 0x0140 ) - val |= DSP_BIND_CENTER_LFE; - - return put_user(val, p); - - case SNDCTL_DSP_BIND_CHANNEL: -#ifdef DEBUG - printk("SNDCTL_DSP_BIND_CHANNEL\n"); -#endif - if (get_user(val, p)) - return -EFAULT; - if ( val == DSP_BIND_QUERY ) { - val = DSP_BIND_FRONT; /* Always report this as being enabled */ - if ( state->card->ac97_status & SPDIF_ON ) - val |= DSP_BIND_SPDIF; - else { - if ( state->card->ac97_status & SURR_ON ) - val |= DSP_BIND_SURR; - if ( state->card->ac97_status & CENTER_LFE_ON ) - val |= DSP_BIND_CENTER_LFE; - } - } else { /* Not a query, set it */ - if (!(file->f_mode & FMODE_WRITE)) - return -EINVAL; - if ( dmabuf->enable == DAC_RUNNING ) { - stop_dac(state); - } - if ( val & DSP_BIND_SPDIF ) { /* Turn on SPDIF */ - /* Ok, this should probably define what slots - * to use. For now, we'll only set it to the - * defaults: - * - * non multichannel codec maps to slots 3&4 - * 2 channel codec maps to slots 7&8 - * 4 channel codec maps to slots 6&9 - * 6 channel codec maps to slots 10&11 - * - * there should be some way for the app to - * select the slot assignment. - */ - - i810_set_spdif_output ( state, AC97_EA_SPSA_3_4, dmabuf->rate ); - if ( !(state->card->ac97_status & SPDIF_ON) ) - val &= ~DSP_BIND_SPDIF; - } else { - int mask; - int channels; - - /* Turn off S/PDIF if it was on */ - if ( state->card->ac97_status & SPDIF_ON ) - i810_set_spdif_output ( state, -1, 0 ); - - mask = val & (DSP_BIND_FRONT | DSP_BIND_SURR | DSP_BIND_CENTER_LFE); - switch (mask) { - case DSP_BIND_FRONT: - channels = 2; - break; - case DSP_BIND_FRONT|DSP_BIND_SURR: - channels = 4; - break; - case DSP_BIND_FRONT|DSP_BIND_SURR|DSP_BIND_CENTER_LFE: - channels = 6; - break; - default: - val = DSP_BIND_FRONT; - channels = 2; - break; - } - i810_set_dac_channels ( state, channels ); - - /* check that they really got turned on */ - if (!(state->card->ac97_status & SURR_ON)) - val &= ~DSP_BIND_SURR; - if (!(state->card->ac97_status & CENTER_LFE_ON)) - val &= ~DSP_BIND_CENTER_LFE; - } - } - return put_user(val, p); - - case SNDCTL_DSP_MAPINBUF: - case SNDCTL_DSP_MAPOUTBUF: - case SNDCTL_DSP_SETSYNCRO: - case SOUND_PCM_WRITE_FILTER: - case SOUND_PCM_READ_FILTER: -#ifdef DEBUG - printk("SNDCTL_* -EINVAL\n"); -#endif - return -EINVAL; - } - return -EINVAL; -} - -static int i810_open(struct inode *inode, struct file *file) -{ - int i = 0; - struct i810_card *card = devs; - struct i810_state *state = NULL; - struct dmabuf *dmabuf = NULL; - - /* find an avaiable virtual channel (instance of /dev/dsp) */ - while (card != NULL) { - /* - * If we are initializing and then fail, card could go - * away unuexpectedly while we are in the for() loop. - * So, check for card on each iteration before we check - * for card->initializing to avoid a possible oops. - * This usually only matters for times when the driver is - * autoloaded by kmod. - */ - for (i = 0; i < 50 && card && card->initializing; i++) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ/20); - } - for (i = 0; i < NR_HW_CH && card && !card->initializing; i++) { - if (card->states[i] == NULL) { - state = card->states[i] = (struct i810_state *) - kzalloc(sizeof(struct i810_state), GFP_KERNEL); - if (state == NULL) - return -ENOMEM; - dmabuf = &state->dmabuf; - goto found_virt; - } - } - card = card->next; - } - /* no more virtual channel avaiable */ - if (!state) - return -ENODEV; - -found_virt: - /* initialize the virtual channel */ - state->virt = i; - state->card = card; - state->magic = I810_STATE_MAGIC; - init_waitqueue_head(&dmabuf->wait); - mutex_init(&state->open_mutex); - file->private_data = state; - dmabuf->trigger = 0; - - /* allocate hardware channels */ - if(file->f_mode & FMODE_READ) { - if((dmabuf->read_channel = card->alloc_rec_pcm_channel(card)) == NULL) { - kfree (card->states[i]); - card->states[i] = NULL; - return -EBUSY; - } - dmabuf->trigger |= PCM_ENABLE_INPUT; - i810_set_adc_rate(state, 8000); - } - if(file->f_mode & FMODE_WRITE) { - if((dmabuf->write_channel = card->alloc_pcm_channel(card)) == NULL) { - /* make sure we free the record channel allocated above */ - if(file->f_mode & FMODE_READ) - card->free_pcm_channel(card,dmabuf->read_channel->num); - kfree (card->states[i]); - card->states[i] = NULL; - return -EBUSY; - } - /* Initialize to 8kHz? What if we don't support 8kHz? */ - /* Let's change this to check for S/PDIF stuff */ - - dmabuf->trigger |= PCM_ENABLE_OUTPUT; - if ( spdif_locked ) { - i810_set_dac_rate(state, spdif_locked); - i810_set_spdif_output(state, AC97_EA_SPSA_3_4, spdif_locked); - } else { - i810_set_dac_rate(state, 8000); - /* Put the ACLink in 2 channel mode by default */ - i = I810_IOREADL(card, GLOB_CNT); - I810_IOWRITEL(i & 0xffcfffff, card, GLOB_CNT); - } - } - - /* set default sample format. According to OSS Programmer's Guide /dev/dsp - should be default to unsigned 8-bits, mono, with sample rate 8kHz and - /dev/dspW will accept 16-bits sample, but we don't support those so we - set it immediately to stereo and 16bit, which is all we do support */ - dmabuf->fmt |= I810_FMT_16BIT | I810_FMT_STEREO; - dmabuf->ossfragsize = 0; - dmabuf->ossmaxfrags = 0; - dmabuf->subdivision = 0; - - state->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE); - - return nonseekable_open(inode, file); -} - -static int i810_release(struct inode *inode, struct file *file) -{ - struct i810_state *state = (struct i810_state *)file->private_data; - struct i810_card *card = state->card; - struct dmabuf *dmabuf = &state->dmabuf; - unsigned long flags; - - lock_kernel(); - - /* stop DMA state machine and free DMA buffers/channels */ - if(dmabuf->trigger & PCM_ENABLE_OUTPUT) { - drain_dac(state, 0); - } - if(dmabuf->trigger & PCM_ENABLE_INPUT) { - stop_adc(state); - } - spin_lock_irqsave(&card->lock, flags); - dealloc_dmabuf(state); - if (file->f_mode & FMODE_WRITE) { - state->card->free_pcm_channel(state->card, dmabuf->write_channel->num); - } - if (file->f_mode & FMODE_READ) { - state->card->free_pcm_channel(state->card, dmabuf->read_channel->num); - } - - state->card->states[state->virt] = NULL; - kfree(state); - spin_unlock_irqrestore(&card->lock, flags); - unlock_kernel(); - - return 0; -} - -static /*const*/ struct file_operations i810_audio_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = i810_read, - .write = i810_write, - .poll = i810_poll, - .ioctl = i810_ioctl, - .mmap = i810_mmap, - .open = i810_open, - .release = i810_release, -}; - -/* Write AC97 codec registers */ - -static u16 i810_ac97_get_mmio(struct ac97_codec *dev, u8 reg) -{ - struct i810_card *card = dev->private_data; - int count = 100; - u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f); - - while(count-- && (readb(card->iobase_mmio + CAS) & 1)) - udelay(1); - -#ifdef DEBUG_MMIO - { - u16 ans = readw(card->ac97base_mmio + reg_set); - printk(KERN_DEBUG "i810_audio: ac97_get_mmio(%d) -> 0x%04X\n", ((int) reg_set) & 0xffff, (u32) ans); - return ans; - } -#else - return readw(card->ac97base_mmio + reg_set); -#endif -} - -static u16 i810_ac97_get_io(struct ac97_codec *dev, u8 reg) -{ - struct i810_card *card = dev->private_data; - int count = 100; - u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f); - - while(count-- && (I810_IOREADB(card, CAS) & 1)) - udelay(1); - - return inw(card->ac97base + reg_set); -} - -static void i810_ac97_set_mmio(struct ac97_codec *dev, u8 reg, u16 data) -{ - struct i810_card *card = dev->private_data; - int count = 100; - u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f); - - while(count-- && (readb(card->iobase_mmio + CAS) & 1)) - udelay(1); - - writew(data, card->ac97base_mmio + reg_set); - -#ifdef DEBUG_MMIO - printk(KERN_DEBUG "i810_audio: ac97_set_mmio(0x%04X, %d)\n", (u32) data, ((int) reg_set) & 0xffff); -#endif -} - -static void i810_ac97_set_io(struct ac97_codec *dev, u8 reg, u16 data) -{ - struct i810_card *card = dev->private_data; - int count = 100; - u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f); - - while(count-- && (I810_IOREADB(card, CAS) & 1)) - udelay(1); - - outw(data, card->ac97base + reg_set); -} - -static u16 i810_ac97_get(struct ac97_codec *dev, u8 reg) -{ - struct i810_card *card = dev->private_data; - u16 ret; - - spin_lock(&card->ac97_lock); - if (card->use_mmio) { - ret = i810_ac97_get_mmio(dev, reg); - } - else { - ret = i810_ac97_get_io(dev, reg); - } - spin_unlock(&card->ac97_lock); - - return ret; -} - -static void i810_ac97_set(struct ac97_codec *dev, u8 reg, u16 data) -{ - struct i810_card *card = dev->private_data; - - spin_lock(&card->ac97_lock); - if (card->use_mmio) { - i810_ac97_set_mmio(dev, reg, data); - } - else { - i810_ac97_set_io(dev, reg, data); - } - spin_unlock(&card->ac97_lock); -} - - -/* OSS /dev/mixer file operation methods */ - -static int i810_open_mixdev(struct inode *inode, struct file *file) -{ - int i; - int minor = iminor(inode); - struct i810_card *card = devs; - - for (card = devs; card != NULL; card = card->next) { - /* - * If we are initializing and then fail, card could go - * away unuexpectedly while we are in the for() loop. - * So, check for card on each iteration before we check - * for card->initializing to avoid a possible oops. - * This usually only matters for times when the driver is - * autoloaded by kmod. - */ - for (i = 0; i < 50 && card && card->initializing; i++) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ/20); - } - for (i = 0; i < NR_AC97 && card && !card->initializing; i++) - if (card->ac97_codec[i] != NULL && - card->ac97_codec[i]->dev_mixer == minor) { - file->private_data = card->ac97_codec[i]; - return nonseekable_open(inode, file); - } - } - return -ENODEV; -} - -static int i810_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) -{ - struct ac97_codec *codec = (struct ac97_codec *)file->private_data; - - return codec->mixer_ioctl(codec, cmd, arg); -} - -static /*const*/ struct file_operations i810_mixer_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .ioctl = i810_ioctl_mixdev, - .open = i810_open_mixdev, -}; - -/* AC97 codec initialisation. These small functions exist so we don't - duplicate code between module init and apm resume */ - -static inline int i810_ac97_exists(struct i810_card *card, int ac97_number) -{ - u32 reg = I810_IOREADL(card, GLOB_STA); - switch (ac97_number) { - case 0: - return reg & (1<<8); - case 1: - return reg & (1<<9); - case 2: - return reg & (1<<28); - } - return 0; -} - -static inline int i810_ac97_enable_variable_rate(struct ac97_codec *codec) -{ - i810_ac97_set(codec, AC97_EXTENDED_STATUS, 9); - i810_ac97_set(codec,AC97_EXTENDED_STATUS, - i810_ac97_get(codec, AC97_EXTENDED_STATUS)|0xE800); - - return (i810_ac97_get(codec, AC97_EXTENDED_STATUS)&1); -} - - -static int i810_ac97_probe_and_powerup(struct i810_card *card,struct ac97_codec *codec) -{ - /* Returns 0 on failure */ - int i; - - if (ac97_probe_codec(codec) == 0) return 0; - - /* power it all up */ - i810_ac97_set(codec, AC97_POWER_CONTROL, - i810_ac97_get(codec, AC97_POWER_CONTROL) & ~0x7f00); - - /* wait for analog ready */ - for (i=100; i && ((i810_ac97_get(codec, AC97_POWER_CONTROL) & 0xf) != 0xf); i--) - { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ/20); - } - return i; -} - -static int is_new_ich(u16 pci_id) -{ - switch (pci_id) { - case PCI_DEVICE_ID_INTEL_82801DB_5: - case PCI_DEVICE_ID_INTEL_82801EB_5: - case PCI_DEVICE_ID_INTEL_ESB_5: - case PCI_DEVICE_ID_INTEL_ICH6_18: - return 1; - default: - break; - } - - return 0; -} - -static inline int ich_use_mmio(struct i810_card *card) -{ - return is_new_ich(card->pci_id) && card->use_mmio; -} - -/** - * i810_ac97_power_up_bus - bring up AC97 link - * @card : ICH audio device to power up - * - * Bring up the ACLink AC97 codec bus - */ - -static int i810_ac97_power_up_bus(struct i810_card *card) -{ - u32 reg = I810_IOREADL(card, GLOB_CNT); - int i; - int primary_codec_id = 0; - - if((reg&2)==0) /* Cold required */ - reg|=2; - else - reg|=4; /* Warm */ - - reg&=~8; /* ACLink on */ - - /* At this point we deassert AC_RESET # */ - I810_IOWRITEL(reg , card, GLOB_CNT); - - /* We must now allow time for the Codec initialisation. - 600mS is the specified time */ - - for(i=0;i<10;i++) - { - if((I810_IOREADL(card, GLOB_CNT)&4)==0) - break; - - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ/20); - } - if(i==10) - { - printk(KERN_ERR "i810_audio: AC'97 reset failed.\n"); - return 0; - } - - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ/2); - - /* - * See if the primary codec comes ready. This must happen - * before we start doing DMA stuff - */ - /* see i810_ac97_init for the next 10 lines (jsaw) */ - if (card->use_mmio) - readw(card->ac97base_mmio); - else - inw(card->ac97base); - if (ich_use_mmio(card)) { - primary_codec_id = (int) readl(card->iobase_mmio + SDM) & 0x3; - printk(KERN_INFO "i810_audio: Primary codec has ID %d\n", - primary_codec_id); - } - - if(! i810_ac97_exists(card, primary_codec_id)) - { - printk(KERN_INFO "i810_audio: Codec not ready.. wait.. "); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ); /* actually 600mS by the spec */ - - if(i810_ac97_exists(card, primary_codec_id)) - printk("OK\n"); - else - printk("no response.\n"); - } - if (card->use_mmio) - readw(card->ac97base_mmio); - else - inw(card->ac97base); - return 1; -} - -static int __devinit i810_ac97_init(struct i810_card *card) -{ - int num_ac97 = 0; - int ac97_id; - int total_channels = 0; - int nr_ac97_max = card_cap[card->pci_id_internal].nr_ac97; - struct ac97_codec *codec; - u16 eid; - u32 reg; - - if(!i810_ac97_power_up_bus(card)) return 0; - - /* Number of channels supported */ - /* What about the codec? Just because the ICH supports */ - /* multiple channels doesn't mean the codec does. */ - /* we'll have to modify this in the codec section below */ - /* to reflect what the codec has. */ - /* ICH and ICH0 only support 2 channels so don't bother */ - /* to check.... */ - - card->channels = 2; - reg = I810_IOREADL(card, GLOB_STA); - if ( reg & 0x0200000 ) - card->channels = 6; - else if ( reg & 0x0100000 ) - card->channels = 4; - printk(KERN_INFO "i810_audio: Audio Controller supports %d channels.\n", card->channels); - printk(KERN_INFO "i810_audio: Defaulting to base 2 channel mode.\n"); - reg = I810_IOREADL(card, GLOB_CNT); - I810_IOWRITEL(reg & 0xffcfffff, card, GLOB_CNT); - - for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) - card->ac97_codec[num_ac97] = NULL; - - /*@FIXME I don't know, if I'm playing to safe here... (jsaw) */ - if ((nr_ac97_max > 2) && !card->use_mmio) nr_ac97_max = 2; - - for (num_ac97 = 0; num_ac97 < nr_ac97_max; num_ac97++) { - /* codec reset */ - printk(KERN_INFO "i810_audio: Resetting connection %d\n", num_ac97); - if (card->use_mmio) - readw(card->ac97base_mmio + 0x80*num_ac97); - else - inw(card->ac97base + 0x80*num_ac97); - - /* If we have the SDATA_IN Map Register, as on ICH4, we - do not loop thru all possible codec IDs but thru all - possible IO channels. Bit 0:1 of SDM then holds the - last codec ID spoken to. - */ - if (ich_use_mmio(card)) { - ac97_id = (int) readl(card->iobase_mmio + SDM) & 0x3; - printk(KERN_INFO "i810_audio: Connection %d with codec id %d\n", - num_ac97, ac97_id); - } - else { - ac97_id = num_ac97; - } - - /* The ICH programmer's reference says you should */ - /* check the ready status before probing. So we chk */ - /* What do we do if it's not ready? Wait and try */ - /* again, or abort? */ - if (!i810_ac97_exists(card, ac97_id)) { - if(num_ac97 == 0) - printk(KERN_ERR "i810_audio: Primary codec not ready.\n"); - } - - if ((codec = ac97_alloc_codec()) == NULL) - return -ENOMEM; - - /* initialize some basic codec information, other fields will be filled - in ac97_probe_codec */ - codec->private_data = card; - codec->id = ac97_id; - card->ac97_id_map[ac97_id] = num_ac97 * 0x80; - - if (card->use_mmio) { - codec->codec_read = i810_ac97_get_mmio; - codec->codec_write = i810_ac97_set_mmio; - } - else { - codec->codec_read = i810_ac97_get_io; - codec->codec_write = i810_ac97_set_io; - } - - if(!i810_ac97_probe_and_powerup(card,codec)) { - printk(KERN_ERR "i810_audio: timed out waiting for codec %d analog ready.\n", ac97_id); - ac97_release_codec(codec); - break; /* it didn't work */ - } - /* Store state information about S/PDIF transmitter */ - card->ac97_status = 0; - - /* Don't attempt to get eid until powerup is complete */ - eid = i810_ac97_get(codec, AC97_EXTENDED_ID); - - if(eid==0xFFFF) - { - printk(KERN_WARNING "i810_audio: no codec attached ?\n"); - ac97_release_codec(codec); - break; - } - - /* Check for an AC97 1.0 soft modem (ID1) */ - - if(codec->modem) - { - printk(KERN_WARNING "i810_audio: codec %d is a softmodem - skipping.\n", ac97_id); - ac97_release_codec(codec); - continue; - } - - card->ac97_features = eid; - - /* Now check the codec for useful features to make up for - the dumbness of the 810 hardware engine */ - - if(!(eid&0x0001)) - printk(KERN_WARNING "i810_audio: only 48Khz playback available.\n"); - else - { - if(!i810_ac97_enable_variable_rate(codec)) { - printk(KERN_WARNING "i810_audio: Codec refused to allow VRA, using 48Khz only.\n"); - card->ac97_features&=~1; - } - } - - /* Turn on the amplifier */ - - codec->codec_write(codec, AC97_POWER_CONTROL, - codec->codec_read(codec, AC97_POWER_CONTROL) & ~0x8000); - - /* Determine how many channels the codec(s) support */ - /* - The primary codec always supports 2 */ - /* - If the codec supports AMAP, surround DACs will */ - /* automaticlly get assigned to slots. */ - /* * Check for surround DACs and increment if */ - /* found. */ - /* - Else check if the codec is revision 2.2 */ - /* * If surround DACs exist, assign them to slots */ - /* and increment channel count. */ - - /* All of this only applies to ICH2 and above. ICH */ - /* and ICH0 only support 2 channels. ICH2 will only */ - /* support multiple codecs in a "split audio" config. */ - /* as described above. */ - - /* TODO: Remove all the debugging messages! */ - - if((eid & 0xc000) == 0) /* primary codec */ - total_channels += 2; - - if(eid & 0x200) { /* GOOD, AMAP support */ - if (eid & 0x0080) /* L/R Surround channels */ - total_channels += 2; - if (eid & 0x0140) /* LFE and Center channels */ - total_channels += 2; - printk("i810_audio: AC'97 codec %d supports AMAP, total channels = %d\n", ac97_id, total_channels); - } else if (eid & 0x0400) { /* this only works on 2.2 compliant codecs */ - eid &= 0xffcf; - if((eid & 0xc000) != 0) { - switch ( total_channels ) { - case 2: - /* Set dsa1, dsa0 to 01 */ - eid |= 0x0010; - break; - case 4: - /* Set dsa1, dsa0 to 10 */ - eid |= 0x0020; - break; - case 6: - /* Set dsa1, dsa0 to 11 */ - eid |= 0x0030; - break; - } - total_channels += 2; - } - i810_ac97_set(codec, AC97_EXTENDED_ID, eid); - eid = i810_ac97_get(codec, AC97_EXTENDED_ID); - printk("i810_audio: AC'97 codec %d, new EID value = 0x%04x\n", ac97_id, eid); - if (eid & 0x0080) /* L/R Surround channels */ - total_channels += 2; - if (eid & 0x0140) /* LFE and Center channels */ - total_channels += 2; - printk("i810_audio: AC'97 codec %d, DAC map configured, total channels = %d\n", ac97_id, total_channels); - } else { - printk("i810_audio: AC'97 codec %d Unable to map surround DAC's (or DAC's not present), total channels = %d\n", ac97_id, total_channels); - } - - if ((codec->dev_mixer = register_sound_mixer(&i810_mixer_fops, -1)) < 0) { - printk(KERN_ERR "i810_audio: couldn't register mixer!\n"); - ac97_release_codec(codec); - break; - } - - card->ac97_codec[num_ac97] = codec; - } - - /* tune up the primary codec */ - ac97_tune_hardware(card->pci_dev, ac97_quirks, ac97_quirk); - - /* pick the minimum of channels supported by ICHx or codec(s) */ - card->channels = (card->channels > total_channels)?total_channels:card->channels; - - return num_ac97; -} - -static void __devinit i810_configure_clocking (void) -{ - struct i810_card *card; - struct i810_state *state; - struct dmabuf *dmabuf; - unsigned int i, offset, new_offset; - unsigned long flags; - - card = devs; - /* We could try to set the clocking for multiple cards, but can you even have - * more than one i810 in a machine? Besides, clocking is global, so unless - * someone actually thinks more than one i810 in a machine is possible and - * decides to rewrite that little bit, setting the rate for more than one card - * is a waste of time. - */ - if(card != NULL) { - state = card->states[0] = (struct i810_state *) - kzalloc(sizeof(struct i810_state), GFP_KERNEL); - if (state == NULL) - return; - dmabuf = &state->dmabuf; - - dmabuf->write_channel = card->alloc_pcm_channel(card); - state->virt = 0; - state->card = card; - state->magic = I810_STATE_MAGIC; - init_waitqueue_head(&dmabuf->wait); - mutex_init(&state->open_mutex); - dmabuf->fmt = I810_FMT_STEREO | I810_FMT_16BIT; - dmabuf->trigger = PCM_ENABLE_OUTPUT; - i810_set_spdif_output(state, -1, 0); - i810_set_dac_channels(state, 2); - i810_set_dac_rate(state, 48000); - if(prog_dmabuf(state, 0) != 0) { - goto config_out_nodmabuf; - } - if(dmabuf->dmasize < 16384) { - goto config_out; - } - dmabuf->count = dmabuf->dmasize; - CIV_TO_LVI(card, dmabuf->write_channel->port, -1); - local_irq_save(flags); - start_dac(state); - offset = i810_get_dma_addr(state, 0); - mdelay(50); - new_offset = i810_get_dma_addr(state, 0); - stop_dac(state); - local_irq_restore(flags); - i = new_offset - offset; -#ifdef DEBUG_INTERRUPTS - printk("i810_audio: %d bytes in 50 milliseconds\n", i); -#endif - if(i == 0) - goto config_out; - i = i / 4 * 20; - if (i > 48500 || i < 47500) { - clocking = clocking * clocking / i; - printk("i810_audio: setting clocking to %d\n", clocking); - } -config_out: - dealloc_dmabuf(state); -config_out_nodmabuf: - state->card->free_pcm_channel(state->card,state->dmabuf.write_channel->num); - kfree(state); - card->states[0] = NULL; - } -} - -/* install the driver, we do not allocate hardware channel nor DMA buffer now, they are defered - until "ACCESS" time (in prog_dmabuf called by open/read/write/ioctl/mmap) */ - -static int __devinit i810_probe(struct pci_dev *pci_dev, const struct pci_device_id *pci_id) -{ - struct i810_card *card; - - if (pci_enable_device(pci_dev)) - return -EIO; - - if (pci_set_dma_mask(pci_dev, I810_DMA_MASK)) { - printk(KERN_ERR "i810_audio: architecture does not support" - " 32bit PCI busmaster DMA\n"); - return -ENODEV; - } - - if ((card = kzalloc(sizeof(struct i810_card), GFP_KERNEL)) == NULL) { - printk(KERN_ERR "i810_audio: out of memory\n"); - return -ENOMEM; - } - - card->initializing = 1; - card->pci_dev = pci_dev; - card->pci_id = pci_id->device; - card->ac97base = pci_resource_start (pci_dev, 0); - card->iobase = pci_resource_start (pci_dev, 1); - - if (!(card->ac97base) || !(card->iobase)) { - card->ac97base = 0; - card->iobase = 0; - } - - /* if chipset could have mmio capability, check it */ - if (card_cap[pci_id->driver_data].flags & CAP_MMIO) { - card->ac97base_mmio_phys = pci_resource_start (pci_dev, 2); - card->iobase_mmio_phys = pci_resource_start (pci_dev, 3); - - if ((card->ac97base_mmio_phys) && (card->iobase_mmio_phys)) { - card->use_mmio = 1; - } - else { - card->ac97base_mmio_phys = 0; - card->iobase_mmio_phys = 0; - } - } - - if (!(card->use_mmio) && (!(card->iobase) || !(card->ac97base))) { - printk(KERN_ERR "i810_audio: No I/O resources available.\n"); - goto out_mem; - } - - card->irq = pci_dev->irq; - card->next = devs; - card->magic = I810_CARD_MAGIC; -#ifdef CONFIG_PM - card->pm_suspended=0; -#endif - spin_lock_init(&card->lock); - spin_lock_init(&card->ac97_lock); - devs = card; - - pci_set_master(pci_dev); - - printk(KERN_INFO "i810: %s found at IO 0x%04lx and 0x%04lx, " - "MEM 0x%04lx and 0x%04lx, IRQ %d\n", - card_names[pci_id->driver_data], - card->iobase, card->ac97base, - card->ac97base_mmio_phys, card->iobase_mmio_phys, - card->irq); - - card->alloc_pcm_channel = i810_alloc_pcm_channel; - card->alloc_rec_pcm_channel = i810_alloc_rec_pcm_channel; - card->alloc_rec_mic_channel = i810_alloc_rec_mic_channel; - card->free_pcm_channel = i810_free_pcm_channel; - - if ((card->channel = pci_alloc_consistent(pci_dev, - sizeof(struct i810_channel)*NR_HW_CH, &card->chandma)) == NULL) { - printk(KERN_ERR "i810: cannot allocate channel DMA memory\n"); - goto out_mem; - } - - { /* We may dispose of this altogether some time soon, so... */ - struct i810_channel *cp = card->channel; - - cp[0].offset = 0; - cp[0].port = 0x00; - cp[0].num = 0; - cp[1].offset = 0; - cp[1].port = 0x10; - cp[1].num = 1; - cp[2].offset = 0; - cp[2].port = 0x20; - cp[2].num = 2; - } - - /* claim our iospace and irq */ - if (!request_region(card->iobase, 64, card_names[pci_id->driver_data])) { - printk(KERN_ERR "i810_audio: unable to allocate region %lx\n", card->iobase); - goto out_region1; - } - if (!request_region(card->ac97base, 256, card_names[pci_id->driver_data])) { - printk(KERN_ERR "i810_audio: unable to allocate region %lx\n", card->ac97base); - goto out_region2; - } - - if (card->use_mmio) { - if (request_mem_region(card->ac97base_mmio_phys, 512, "ich_audio MMBAR")) { - if ((card->ac97base_mmio = ioremap(card->ac97base_mmio_phys, 512))) { /*@FIXME can ioremap fail? don't know (jsaw) */ - if (request_mem_region(card->iobase_mmio_phys, 256, "ich_audio MBBAR")) { - if ((card->iobase_mmio = ioremap(card->iobase_mmio_phys, 256))) { - printk(KERN_INFO "i810: %s mmio at 0x%04lx and 0x%04lx\n", - card_names[pci_id->driver_data], - (unsigned long) card->ac97base_mmio, - (unsigned long) card->iobase_mmio); - } - else { - iounmap(card->ac97base_mmio); - release_mem_region(card->ac97base_mmio_phys, 512); - release_mem_region(card->iobase_mmio_phys, 512); - card->use_mmio = 0; - } - } - else { - iounmap(card->ac97base_mmio); - release_mem_region(card->ac97base_mmio_phys, 512); - card->use_mmio = 0; - } - } - } - else { - card->use_mmio = 0; - } - } - - /* initialize AC97 codec and register /dev/mixer */ - if (i810_ac97_init(card) <= 0) - goto out_iospace; - pci_set_drvdata(pci_dev, card); - - if(clocking == 0) { - clocking = 48000; - i810_configure_clocking(); - } - - /* register /dev/dsp */ - if ((card->dev_audio = register_sound_dsp(&i810_audio_fops, -1)) < 0) { - int i; - printk(KERN_ERR "i810_audio: couldn't register DSP device!\n"); - for (i = 0; i < NR_AC97; i++) - if (card->ac97_codec[i] != NULL) { - unregister_sound_mixer(card->ac97_codec[i]->dev_mixer); - ac97_release_codec(card->ac97_codec[i]); - } - goto out_iospace; - } - - if (request_irq(card->irq, &i810_interrupt, IRQF_SHARED, - card_names[pci_id->driver_data], card)) { - printk(KERN_ERR "i810_audio: unable to allocate irq %d\n", card->irq); - goto out_iospace; - } - - - card->initializing = 0; - return 0; - -out_iospace: - if (card->use_mmio) { - iounmap(card->ac97base_mmio); - iounmap(card->iobase_mmio); - release_mem_region(card->ac97base_mmio_phys, 512); - release_mem_region(card->iobase_mmio_phys, 256); - } - release_region(card->ac97base, 256); -out_region2: - release_region(card->iobase, 64); -out_region1: - pci_free_consistent(pci_dev, sizeof(struct i810_channel)*NR_HW_CH, - card->channel, card->chandma); -out_mem: - kfree(card); - return -ENODEV; -} - -static void __devexit i810_remove(struct pci_dev *pci_dev) -{ - int i; - struct i810_card *card = pci_get_drvdata(pci_dev); - /* free hardware resources */ - free_irq(card->irq, devs); - release_region(card->iobase, 64); - release_region(card->ac97base, 256); - pci_free_consistent(pci_dev, sizeof(struct i810_channel)*NR_HW_CH, - card->channel, card->chandma); - if (card->use_mmio) { - iounmap(card->ac97base_mmio); - iounmap(card->iobase_mmio); - release_mem_region(card->ac97base_mmio_phys, 512); - release_mem_region(card->iobase_mmio_phys, 256); - } - - /* unregister audio devices */ - for (i = 0; i < NR_AC97; i++) - if (card->ac97_codec[i] != NULL) { - unregister_sound_mixer(card->ac97_codec[i]->dev_mixer); - ac97_release_codec(card->ac97_codec[i]); - card->ac97_codec[i] = NULL; - } - unregister_sound_dsp(card->dev_audio); - kfree(card); -} - -#ifdef CONFIG_PM -static int i810_pm_suspend(struct pci_dev *dev, pm_message_t pm_state) -{ - struct i810_card *card = pci_get_drvdata(dev); - struct i810_state *state; - unsigned long flags; - struct dmabuf *dmabuf; - int i,num_ac97; -#ifdef DEBUG - printk("i810_audio: i810_pm_suspend called\n"); -#endif - if(!card) return 0; - spin_lock_irqsave(&card->lock, flags); - card->pm_suspended=1; - for(i=0;i<NR_HW_CH;i++) { - state = card->states[i]; - if(!state) continue; - /* this happens only if there are open files */ - dmabuf = &state->dmabuf; - if(dmabuf->enable & DAC_RUNNING || - (dmabuf->count && (dmabuf->trigger & PCM_ENABLE_OUTPUT))) { - state->pm_saved_dac_rate=dmabuf->rate; - stop_dac(state); - } else { - state->pm_saved_dac_rate=0; - } - if(dmabuf->enable & ADC_RUNNING) { - state->pm_saved_adc_rate=dmabuf->rate; - stop_adc(state); - } else { - state->pm_saved_adc_rate=0; - } - dmabuf->ready = 0; - dmabuf->swptr = dmabuf->hwptr = 0; - dmabuf->count = dmabuf->total_bytes = 0; - } - - spin_unlock_irqrestore(&card->lock, flags); - - /* save mixer settings */ - for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) { - struct ac97_codec *codec = card->ac97_codec[num_ac97]; - if(!codec) continue; - for(i=0;i< SOUND_MIXER_NRDEVICES ;i++) { - if((supported_mixer(codec,i)) && - (codec->read_mixer)) { - card->pm_saved_mixer_settings[i][num_ac97]= - codec->read_mixer(codec,i); - } - } - } - pci_save_state(dev); /* XXX do we need this? */ - pci_disable_device(dev); /* disable busmastering */ - pci_set_power_state(dev,3); /* Zzz. */ - - return 0; -} - - -static int i810_pm_resume(struct pci_dev *dev) -{ - int num_ac97,i=0; - struct i810_card *card=pci_get_drvdata(dev); - pci_enable_device(dev); - pci_restore_state (dev); - - /* observation of a toshiba portege 3440ct suggests that the - hardware has to be more or less completely reinitialized from - scratch after an apm suspend. Works For Me. -dan */ - - i810_ac97_power_up_bus(card); - - for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) { - struct ac97_codec *codec = card->ac97_codec[num_ac97]; - /* check they haven't stolen the hardware while we were - away */ - if(!codec || !i810_ac97_exists(card,num_ac97)) { - if(num_ac97) continue; - else BUG(); - } - if(!i810_ac97_probe_and_powerup(card,codec)) BUG(); - - if((card->ac97_features&0x0001)) { - /* at probe time we found we could do variable - rates, but APM suspend has made it forget - its magical powers */ - if(!i810_ac97_enable_variable_rate(codec)) BUG(); - } - /* we lost our mixer settings, so restore them */ - for(i=0;i< SOUND_MIXER_NRDEVICES ;i++) { - if(supported_mixer(codec,i)){ - int val=card-> - pm_saved_mixer_settings[i][num_ac97]; - codec->mixer_state[i]=val; - codec->write_mixer(codec,i, - (val & 0xff) , - ((val >> 8) & 0xff) ); - } - } - } - - /* we need to restore the sample rate from whatever it was */ - for(i=0;i<NR_HW_CH;i++) { - struct i810_state * state=card->states[i]; - if(state) { - if(state->pm_saved_adc_rate) - i810_set_adc_rate(state,state->pm_saved_adc_rate); - if(state->pm_saved_dac_rate) - i810_set_dac_rate(state,state->pm_saved_dac_rate); - } - } - - - card->pm_suspended = 0; - - /* any processes that were reading/writing during the suspend - probably ended up here */ - for(i=0;i<NR_HW_CH;i++) { - struct i810_state *state = card->states[i]; - if(state) wake_up(&state->dmabuf.wait); - } - - return 0; -} -#endif /* CONFIG_PM */ - -MODULE_AUTHOR("The Linux kernel team"); -MODULE_DESCRIPTION("Intel 810 audio support"); -MODULE_LICENSE("GPL"); -module_param(ftsodell, int, 0444); -module_param(clocking, uint, 0444); -module_param(strict_clocking, int, 0444); -module_param(spdif_locked, int, 0444); - -#define I810_MODULE_NAME "i810_audio" - -static struct pci_driver i810_pci_driver = { - .name = I810_MODULE_NAME, - .id_table = i810_pci_tbl, - .probe = i810_probe, - .remove = __devexit_p(i810_remove), -#ifdef CONFIG_PM - .suspend = i810_pm_suspend, - .resume = i810_pm_resume, -#endif /* CONFIG_PM */ -}; - - -static int __init i810_init_module (void) -{ - int retval; - - printk(KERN_INFO "Intel 810 + AC97 Audio, version " - DRIVER_VERSION ", " __TIME__ " " __DATE__ "\n"); - - retval = pci_register_driver(&i810_pci_driver); - if (retval) - return retval; - - if(ftsodell != 0) { - printk("i810_audio: ftsodell is now a deprecated option.\n"); - } - if(spdif_locked > 0 ) { - if(spdif_locked == 32000 || spdif_locked == 44100 || spdif_locked == 48000) { - printk("i810_audio: Enabling S/PDIF at sample rate %dHz.\n", spdif_locked); - } else { - printk("i810_audio: S/PDIF can only be locked to 32000, 44100, or 48000Hz.\n"); - spdif_locked = 0; - } - } - - return 0; -} - -static void __exit i810_cleanup_module (void) -{ - pci_unregister_driver(&i810_pci_driver); -} - -module_init(i810_init_module); -module_exit(i810_cleanup_module); - -/* -Local Variables: -c-basic-offset: 8 -End: -*/ |