summaryrefslogtreecommitdiff
path: root/sound/pci/hda/alc260_quirks.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/hda/alc260_quirks.c')
-rw-r--r--sound/pci/hda/alc260_quirks.c968
1 files changed, 0 insertions, 968 deletions
diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c
deleted file mode 100644
index 3b5170b9700f..000000000000
--- a/sound/pci/hda/alc260_quirks.c
+++ /dev/null
@@ -1,968 +0,0 @@
-/*
- * ALC260 quirk models
- * included by patch_realtek.c
- */
-
-/* ALC260 models */
-enum {
- ALC260_AUTO,
- ALC260_BASIC,
- ALC260_FUJITSU_S702X,
- ALC260_ACER,
- ALC260_WILL,
- ALC260_REPLACER_672V,
- ALC260_FAVORIT100,
-#ifdef CONFIG_SND_DEBUG
- ALC260_TEST,
-#endif
- ALC260_MODEL_LAST /* last tag */
-};
-
-static const hda_nid_t alc260_dac_nids[1] = {
- /* front */
- 0x02,
-};
-
-static const hda_nid_t alc260_adc_nids[1] = {
- /* ADC0 */
- 0x04,
-};
-
-static const hda_nid_t alc260_adc_nids_alt[1] = {
- /* ADC1 */
- 0x05,
-};
-
-/* NIDs used when simultaneous access to both ADCs makes sense. Note that
- * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
- */
-static const hda_nid_t alc260_dual_adc_nids[2] = {
- /* ADC0, ADC1 */
- 0x04, 0x05
-};
-
-#define ALC260_DIGOUT_NID 0x03
-#define ALC260_DIGIN_NID 0x06
-
-static const struct hda_input_mux alc260_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
-
-/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack,
- * headphone jack and the internal CD lines since these are the only pins at
- * which audio can appear. For flexibility, also allow the option of
- * recording the mixer output on the second ADC (ADC0 doesn't have a
- * connection to the mixer output).
- */
-static const struct hda_input_mux alc260_fujitsu_capture_sources[2] = {
- {
- .num_items = 3,
- .items = {
- { "Mic/Line", 0x0 },
- { "CD", 0x4 },
- { "Headphone", 0x2 },
- },
- },
- {
- .num_items = 4,
- .items = {
- { "Mic/Line", 0x0 },
- { "CD", 0x4 },
- { "Headphone", 0x2 },
- { "Mixer", 0x5 },
- },
- },
-
-};
-
-/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to
- * the Fujitsu S702x, but jacks are marked differently.
- */
-static const struct hda_input_mux alc260_acer_capture_sources[2] = {
- {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- { "Headphone", 0x5 },
- },
- },
- {
- .num_items = 5,
- .items = {
- { "Mic", 0x0 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- { "Headphone", 0x6 },
- { "Mixer", 0x5 },
- },
- },
-};
-
-/* Maxdata Favorit 100XS */
-static const struct hda_input_mux alc260_favorit100_capture_sources[2] = {
- {
- .num_items = 2,
- .items = {
- { "Line/Mic", 0x0 },
- { "CD", 0x4 },
- },
- },
- {
- .num_items = 3,
- .items = {
- { "Line/Mic", 0x0 },
- { "CD", 0x4 },
- { "Mixer", 0x5 },
- },
- },
-};
-
-/*
- * This is just place-holder, so there's something for alc_build_pcms to look
- * at when it calculates the maximum number of channels. ALC260 has no mixer
- * element which allows changing the channel mode, so the verb list is
- * never used.
- */
-static const struct hda_channel_mode alc260_modes[1] = {
- { 2, NULL },
-};
-
-
-/* Mixer combinations
- *
- * basic: base_output + input + pc_beep + capture
- * fujitsu: fujitsu + capture
- * acer: acer + capture
- */
-
-static const struct snd_kcontrol_new alc260_base_output_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
- HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc260_input_mixer[] = {
- HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
- { } /* end */
-};
-
-/* Fujitsu S702x series laptops. ALC260 pin usage: Mic/Line jack = 0x12,
- * HP jack = 0x14, CD audio = 0x16, internal speaker = 0x10.
- */
-static const struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT),
- ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT),
- ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT),
- { } /* end */
-};
-
-/* Mixer for Acer TravelMate(/Extensa/Aspire) notebooks. Note that current
- * versions of the ALC260 don't act on requests to enable mic bias from NID
- * 0x0f (used to drive the headphone jack in these laptops). The ALC260
- * datasheet doesn't mention this restriction. At this stage it's not clear
- * whether this behaviour is intentional or is a hardware bug in chip
- * revisions available in early 2006. Therefore for now allow the
- * "Headphone Jack Mode" control to span all choices, but if it turns out
- * that the lack of mic bias for this NID is intentional we could change the
- * mode from ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
- *
- * In addition, Acer TravelMate(/Extensa/Aspire) notebooks in early 2006
- * don't appear to make the mic bias available from the "line" jack, even
- * though the NID used for this jack (0x14) can supply it. The theory is
- * that perhaps Acer have included blocking capacitors between the ALC260
- * and the output jack. If this turns out to be the case for all such
- * models the "Line Jack Mode" mode could be changed from ALC_PIN_DIR_INOUT
- * to ALC_PIN_DIR_INOUT_NOMICBIAS.
- *
- * The C20x Tablet series have a mono internal speaker which is controlled
- * via the chip's Mono sum widget and pin complex, so include the necessary
- * controls for such models. On models without a "mono speaker" the control
- * won't do anything.
- */
-static const struct snd_kcontrol_new alc260_acer_mixer[] = {
- HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
- ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
- HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
- HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2,
- HDA_INPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
- ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
- ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
- { } /* end */
-};
-
-/* Maxdata Favorit 100XS: one output and one input (0x12) jack
- */
-static const struct snd_kcontrol_new alc260_favorit100_mixer[] = {
- HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
- ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
- HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
- ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
- { } /* end */
-};
-
-/* Packard bell V7900 ALC260 pin usage: HP = 0x0f, Mic jack = 0x12,
- * Line In jack = 0x14, CD audio = 0x16, pc beep = 0x17.
- */
-static const struct snd_kcontrol_new alc260_will_mixer[] = {
- HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
- ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
- ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
- { } /* end */
-};
-
-/* Replacer 672V ALC260 pin usage: Mic jack = 0x12,
- * Line In jack = 0x14, ATAPI Mic = 0x13, speaker = 0x0f.
- */
-static const struct snd_kcontrol_new alc260_replacer_672v_mixer[] = {
- HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
- ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
- HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x07, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("ATATI Mic Playback Switch", 0x07, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
- ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
- { } /* end */
-};
-
-/*
- * initialization verbs
- */
-static const struct hda_verb alc260_init_verbs[] = {
- /* Line In pin widget for input */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* CD pin widget for input */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* Mic1 (rear panel) pin widget for input and vref at 80% */
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- /* Mic2 (front panel) pin widget for input and vref at 80% */
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- /* LINE-2 is used for line-out in rear */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* select line-out */
- {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* LINE-OUT pin */
- {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* enable HP */
- {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- /* enable Mono */
- {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* mute capture amp left and right */
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to line in (default select for this ADC) */
- {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
- /* mute capture amp left and right */
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to line in (default select for this ADC) */
- {0x05, AC_VERB_SET_CONNECT_SEL, 0x02},
- /* set vol=0 Line-Out mixer amp left and right */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* unmute pin widget amp left and right (no gain on this amp) */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* set vol=0 HP mixer amp left and right */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* unmute pin widget amp left and right (no gain on this amp) */
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* set vol=0 Mono mixer amp left and right */
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* unmute pin widget amp left and right (no gain on this amp) */
- {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* unmute LINE-2 out pin */
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
- * Line In 2 = 0x03
- */
- /* mute analog inputs */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
- /* mute Front out path */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* mute Headphone out path */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* mute Mono out path */
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- { }
-};
-
-/* Initialisation sequence for ALC260 as configured in Fujitsu S702x
- * laptops. ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD
- * audio = 0x16, internal speaker = 0x10.
- */
-static const struct hda_verb alc260_fujitsu_init_verbs[] = {
- /* Disable all GPIOs */
- {0x01, AC_VERB_SET_GPIO_MASK, 0},
- /* Internal speaker is connected to headphone pin */
- {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- /* Headphone/Line-out jack connects to Line1 pin; make it an output */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* Mic/Line-in jack is connected to mic1 pin, so make it an input */
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* Ensure all other unused pins are disabled and muted. */
- {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-
- /* Disable digital (SPDIF) pins */
- {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
- {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
- /* Ensure Line1 pin widget takes its input from the OUT1 sum bus
- * when acting as an output.
- */
- {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
-
- /* Start with output sum widgets muted and their output gains at min */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Unmute Line1 pin widget output buffer since it starts as an output.
- * If the pin mode is changed by the user the pin mode control will
- * take care of enabling the pin's input/output buffers as needed.
- * Therefore there's no need to enable the input buffer at this
- * stage.
- */
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Unmute input buffer of pin widget used for Line-in (no equiv
- * mixer ctrl)
- */
- {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Mute capture amp left and right */
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- /* Set ADC connection select to match default mixer setting - line
- * in (on mic1 pin)
- */
- {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Do the same for the second ADC: mute capture input amp and
- * set ADC connection to line in (on mic1 pin)
- */
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Mute all inputs to mixer widget (even unconnected ones) */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-
- { }
-};
-
-/* Initialisation sequence for ALC260 as configured in Acer TravelMate and
- * similar laptops (adapted from Fujitsu init verbs).
- */
-static const struct hda_verb alc260_acer_init_verbs[] = {
- /* On TravelMate laptops, GPIO 0 enables the internal speaker and
- * the headphone jack. Turn this on and rely on the standard mute
- * methods whenever the user wants to turn these outputs off.
- */
- {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
- {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
- {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
- /* Internal speaker/Headphone jack is connected to Line-out pin */
- {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- /* Internal microphone/Mic jack is connected to Mic1 pin */
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
- /* Line In jack is connected to Line1 pin */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* Some Acers (eg: C20x Tablets) use Mono pin for internal speaker */
- {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- /* Ensure all other unused pins are disabled and muted. */
- {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- /* Disable digital (SPDIF) pins */
- {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
- {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
- /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
- * bus when acting as outputs.
- */
- {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
- {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
-
- /* Start with output sum widgets muted and their output gains at min */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* Unmute Line-out pin widget amp left and right
- * (no equiv mixer ctrl)
- */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Unmute mono pin widget amp output (no equiv mixer ctrl) */
- {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Unmute Mic1 and Line1 pin widget input buffers since they start as
- * inputs. If the pin mode is changed by the user the pin mode control
- * will take care of enabling the pin's input/output buffers as needed.
- * Therefore there's no need to enable the input buffer at this
- * stage.
- */
- {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Mute capture amp left and right */
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- /* Set ADC connection select to match default mixer setting - mic
- * (on mic1 pin)
- */
- {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Do similar with the second ADC: mute capture input amp and
- * set ADC connection to mic to match ALSA's default state.
- */
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Mute all inputs to mixer widget (even unconnected ones) */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-
- { }
-};
-
-/* Initialisation sequence for Maxdata Favorit 100XS
- * (adapted from Acer init verbs).
- */
-static const struct hda_verb alc260_favorit100_init_verbs[] = {
- /* GPIO 0 enables the output jack.
- * Turn this on and rely on the standard mute
- * methods whenever the user wants to turn these outputs off.
- */
- {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
- {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
- {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
- /* Line/Mic input jack is connected to Mic1 pin */
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
- /* Ensure all other unused pins are disabled and muted. */
- {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- /* Disable digital (SPDIF) pins */
- {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
- {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
- /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
- * bus when acting as outputs.
- */
- {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
- {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
-
- /* Start with output sum widgets muted and their output gains at min */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* Unmute Line-out pin widget amp left and right
- * (no equiv mixer ctrl)
- */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Unmute Mic1 and Line1 pin widget input buffers since they start as
- * inputs. If the pin mode is changed by the user the pin mode control
- * will take care of enabling the pin's input/output buffers as needed.
- * Therefore there's no need to enable the input buffer at this
- * stage.
- */
- {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Mute capture amp left and right */
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- /* Set ADC connection select to match default mixer setting - mic
- * (on mic1 pin)
- */
- {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Do similar with the second ADC: mute capture input amp and
- * set ADC connection to mic to match ALSA's default state.
- */
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Mute all inputs to mixer widget (even unconnected ones) */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-
- { }
-};
-
-static const struct hda_verb alc260_will_verbs[] = {
- {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x0b, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
- {0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
- {0x1a, AC_VERB_SET_PROC_COEF, 0x3040},
- {}
-};
-
-static const struct hda_verb alc260_replacer_672v_verbs[] = {
- {0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
- {0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
- {0x1a, AC_VERB_SET_PROC_COEF, 0x3050},
-
- {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
- {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
- {0x01, AC_VERB_SET_GPIO_DATA, 0x00},
-
- {0x0f, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-/* toggle speaker-output according to the hp-jack state */
-static void alc260_replacer_672v_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- /* speaker --> GPIO Data 0, hp or spdif --> GPIO data 1 */
- present = snd_hda_jack_detect(codec, 0x0f);
- if (present) {
- snd_hda_codec_write_cache(codec, 0x01, 0,
- AC_VERB_SET_GPIO_DATA, 1);
- snd_hda_codec_write_cache(codec, 0x0f, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL,
- PIN_HP);
- } else {
- snd_hda_codec_write_cache(codec, 0x01, 0,
- AC_VERB_SET_GPIO_DATA, 0);
- snd_hda_codec_write_cache(codec, 0x0f, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL,
- PIN_OUT);
- }
-}
-
-static void alc260_replacer_672v_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- if ((res >> 26) == ALC_HP_EVENT)
- alc260_replacer_672v_automute(codec);
-}
-
-static const struct hda_verb alc260_hp_dc7600_verbs[] = {
- {0x05, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-/* Test configuration for debugging, modelled after the ALC880 test
- * configuration.
- */
-#ifdef CONFIG_SND_DEBUG
-static const hda_nid_t alc260_test_dac_nids[1] = {
- 0x02,
-};
-static const hda_nid_t alc260_test_adc_nids[2] = {
- 0x04, 0x05,
-};
-/* For testing the ALC260, each input MUX needs its own definition since
- * the signal assignments are different. This assumes that the first ADC
- * is NID 0x04.
- */
-static const struct hda_input_mux alc260_test_capture_sources[2] = {
- {
- .num_items = 7,
- .items = {
- { "MIC1 pin", 0x0 },
- { "MIC2 pin", 0x1 },
- { "LINE1 pin", 0x2 },
- { "LINE2 pin", 0x3 },
- { "CD pin", 0x4 },
- { "LINE-OUT pin", 0x5 },
- { "HP-OUT pin", 0x6 },
- },
- },
- {
- .num_items = 8,
- .items = {
- { "MIC1 pin", 0x0 },
- { "MIC2 pin", 0x1 },
- { "LINE1 pin", 0x2 },
- { "LINE2 pin", 0x3 },
- { "CD pin", 0x4 },
- { "Mixer", 0x5 },
- { "LINE-OUT pin", 0x6 },
- { "HP-OUT pin", 0x7 },
- },
- },
-};
-static const struct snd_kcontrol_new alc260_test_mixer[] = {
- /* Output driver widgets */
- HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT),
-
- /* Modes for retasking pin widgets
- * Note: the ALC260 doesn't seem to act on requests to enable mic
- * bias from NIDs 0x0f and 0x10. The ALC260 datasheet doesn't
- * mention this restriction. At this stage it's not clear whether
- * this behaviour is intentional or is a hardware bug in chip
- * revisions available at least up until early 2006. Therefore for
- * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all
- * choices, but if it turns out that the lack of mic bias for these
- * NIDs is intentional we could change their modes from
- * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
- */
- ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT),
-
- /* Loopback mixer controls */
- HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT),
- HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT),
- HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT),
- HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT),
- HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT),
- HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT),
- HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT),
-
- /* Controls for GPIO pins, assuming they are configured as outputs */
- ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
- ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
- ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
- ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
-
- /* Switches to allow the digital IO pins to be enabled. The datasheet
- * is ambigious as to which NID is which; testing on laptops which
- * make this output available should provide clarification.
- */
- ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01),
- ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01),
-
- /* A switch allowing EAPD to be enabled. Some laptops seem to use
- * this output to turn on an external amplifier.
- */
- ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02),
- ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02),
-
- { } /* end */
-};
-static const struct hda_verb alc260_test_init_verbs[] = {
- /* Enable all GPIOs as outputs with an initial value of 0 */
- {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f},
- {0x01, AC_VERB_SET_GPIO_DATA, 0x00},
- {0x01, AC_VERB_SET_GPIO_MASK, 0x0f},
-
- /* Enable retasking pins as output, initially without power amp */
- {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-
- /* Disable digital (SPDIF) pins initially, but users can enable
- * them via a mixer switch. In the case of SPDIF-out, this initverb
- * payload also sets the generation to 0, output to be in "consumer"
- * PCM format, copyright asserted, no pre-emphasis and no validity
- * control.
- */
- {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
- {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
- /* Ensure mic1, mic2, line1 and line2 pin widgets take input from the
- * OUT1 sum bus when acting as an output.
- */
- {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
- {0x0c, AC_VERB_SET_CONNECT_SEL, 0},
- {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
- {0x0e, AC_VERB_SET_CONNECT_SEL, 0},
-
- /* Start with output sum widgets muted and their output gains at min */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* Unmute retasking pin widget output buffers since the default
- * state appears to be output. As the pin mode is changed by the
- * user the pin mode control will take care of enabling the pin's
- * input/output buffers as needed.
- */
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Also unmute the mono-out pin widget */
- {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* Mute capture amp left and right */
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- /* Set ADC connection select to match default mixer setting (mic1
- * pin)
- */
- {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Do the same for the second ADC: mute capture input amp and
- * set ADC connection to mic1 pin
- */
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Mute all inputs to mixer widget (even unconnected ones) */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-
- { }
-};
-#endif
-
-/*
- * ALC260 configurations
- */
-static const char * const alc260_models[ALC260_MODEL_LAST] = {
- [ALC260_BASIC] = "basic",
- [ALC260_FUJITSU_S702X] = "fujitsu",
- [ALC260_ACER] = "acer",
- [ALC260_WILL] = "will",
- [ALC260_REPLACER_672V] = "replacer",
- [ALC260_FAVORIT100] = "favorit100",
-#ifdef CONFIG_SND_DEBUG
- [ALC260_TEST] = "test",
-#endif
- [ALC260_AUTO] = "auto",
-};
-
-static const struct snd_pci_quirk alc260_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER),
- SND_PCI_QUIRK(0x1025, 0x007f, "Acer", ALC260_WILL),
- SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER),
- SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100),
- SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC),
- SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
- SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
- SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X),
- SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
- SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_REPLACER_672V),
- SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_WILL),
- {}
-};
-
-static const struct alc_config_preset alc260_presets[] = {
- [ALC260_BASIC] = {
- .mixers = { alc260_base_output_mixer,
- alc260_input_mixer },
- .init_verbs = { alc260_init_verbs },
- .num_dacs = ARRAY_SIZE(alc260_dac_nids),
- .dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
- .adc_nids = alc260_dual_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .input_mux = &alc260_capture_source,
- },
- [ALC260_FUJITSU_S702X] = {
- .mixers = { alc260_fujitsu_mixer },
- .init_verbs = { alc260_fujitsu_init_verbs },
- .num_dacs = ARRAY_SIZE(alc260_dac_nids),
- .dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
- .adc_nids = alc260_dual_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources),
- .input_mux = alc260_fujitsu_capture_sources,
- },
- [ALC260_ACER] = {
- .mixers = { alc260_acer_mixer },
- .init_verbs = { alc260_acer_init_verbs },
- .num_dacs = ARRAY_SIZE(alc260_dac_nids),
- .dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
- .adc_nids = alc260_dual_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources),
- .input_mux = alc260_acer_capture_sources,
- },
- [ALC260_FAVORIT100] = {
- .mixers = { alc260_favorit100_mixer },
- .init_verbs = { alc260_favorit100_init_verbs },
- .num_dacs = ARRAY_SIZE(alc260_dac_nids),
- .dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
- .adc_nids = alc260_dual_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources),
- .input_mux = alc260_favorit100_capture_sources,
- },
- [ALC260_WILL] = {
- .mixers = { alc260_will_mixer },
- .init_verbs = { alc260_init_verbs, alc260_will_verbs },
- .num_dacs = ARRAY_SIZE(alc260_dac_nids),
- .dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
- .adc_nids = alc260_adc_nids,
- .dig_out_nid = ALC260_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .input_mux = &alc260_capture_source,
- },
- [ALC260_REPLACER_672V] = {
- .mixers = { alc260_replacer_672v_mixer },
- .init_verbs = { alc260_init_verbs, alc260_replacer_672v_verbs },
- .num_dacs = ARRAY_SIZE(alc260_dac_nids),
- .dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
- .adc_nids = alc260_adc_nids,
- .dig_out_nid = ALC260_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .input_mux = &alc260_capture_source,
- .unsol_event = alc260_replacer_672v_unsol_event,
- .init_hook = alc260_replacer_672v_automute,
- },
-#ifdef CONFIG_SND_DEBUG
- [ALC260_TEST] = {
- .mixers = { alc260_test_mixer },
- .init_verbs = { alc260_test_init_verbs },
- .num_dacs = ARRAY_SIZE(alc260_test_dac_nids),
- .dac_nids = alc260_test_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids),
- .adc_nids = alc260_test_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources),
- .input_mux = alc260_test_capture_sources,
- },
-#endif
-};
-