summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/hdac_hdmi.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/hdac_hdmi.c')
-rw-r--r--sound/soc/codecs/hdac_hdmi.c94
1 files changed, 42 insertions, 52 deletions
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index 26f9459cb3bc..aaa038ffc8a5 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -1420,32 +1420,39 @@ static int hdmi_codec_remove(struct snd_soc_codec *codec)
}
#ifdef CONFIG_PM
-static int hdmi_codec_resume(struct snd_soc_codec *codec)
+static int hdmi_codec_prepare(struct device *dev)
{
- struct hdac_ext_device *edev = snd_soc_codec_get_drvdata(codec);
+ struct hdac_ext_device *edev = to_hda_ext_device(dev);
+ struct hdac_device *hdac = &edev->hdac;
+
+ pm_runtime_get_sync(&edev->hdac.dev);
+
+ /*
+ * Power down afg.
+ * codec_read is preferred over codec_write to set the power state.
+ * This way verb is send to set the power state and response
+ * is received. So setting power state is ensured without using loop
+ * to read the state.
+ */
+ snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE,
+ AC_PWRST_D3);
+
+ return 0;
+}
+
+static void hdmi_codec_complete(struct device *dev)
+{
+ struct hdac_ext_device *edev = to_hda_ext_device(dev);
struct hdac_hdmi_priv *hdmi = edev->private_data;
struct hdac_hdmi_pin *pin;
struct hdac_device *hdac = &edev->hdac;
- struct hdac_bus *bus = hdac->bus;
- int err;
- unsigned long timeout;
-
- hdac_hdmi_skl_enable_all_pins(&edev->hdac);
- hdac_hdmi_skl_enable_dp12(&edev->hdac);
/* Power up afg */
- if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0)) {
-
- snd_hdac_codec_write(hdac, hdac->afg, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+ snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE,
+ AC_PWRST_D0);
- /* Wait till power state is set to D0 */
- timeout = jiffies + msecs_to_jiffies(1000);
- while (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0)
- && time_before(jiffies, timeout)) {
- msleep(50);
- }
- }
+ hdac_hdmi_skl_enable_all_pins(&edev->hdac);
+ hdac_hdmi_skl_enable_dp12(&edev->hdac);
/*
* As the ELD notify callback request is not entertained while the
@@ -1455,28 +1462,16 @@ static int hdmi_codec_resume(struct snd_soc_codec *codec)
list_for_each_entry(pin, &hdmi->pin_list, head)
hdac_hdmi_present_sense(pin, 1);
- /*
- * Codec power is turned ON during controller resume.
- * Turn it OFF here
- */
- err = snd_hdac_display_power(bus, false);
- if (err < 0) {
- dev_err(bus->dev,
- "Cannot turn OFF display power on i915, err: %d\n",
- err);
- return err;
- }
-
- return 0;
+ pm_runtime_put_sync(&edev->hdac.dev);
}
#else
-#define hdmi_codec_resume NULL
+#define hdmi_codec_prepare NULL
+#define hdmi_codec_complete NULL
#endif
static struct snd_soc_codec_driver hdmi_hda_codec = {
.probe = hdmi_codec_probe,
.remove = hdmi_codec_remove,
- .resume = hdmi_codec_resume,
.idle_bias_off = true,
};
@@ -1561,7 +1556,6 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
struct hdac_ext_device *edev = to_hda_ext_device(dev);
struct hdac_device *hdac = &edev->hdac;
struct hdac_bus *bus = hdac->bus;
- unsigned long timeout;
int err;
dev_dbg(dev, "Enter: %s\n", __func__);
@@ -1570,20 +1564,15 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
if (!bus)
return 0;
- /* Power down afg */
- if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)) {
- snd_hdac_codec_write(hdac, hdac->afg, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
-
- /* Wait till power state is set to D3 */
- timeout = jiffies + msecs_to_jiffies(1000);
- while (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)
- && time_before(jiffies, timeout)) {
-
- msleep(50);
- }
- }
-
+ /*
+ * Power down afg.
+ * codec_read is preferred over codec_write to set the power state.
+ * This way verb is send to set the power state and response
+ * is received. So setting power state is ensured without using loop
+ * to read the state.
+ */
+ snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE,
+ AC_PWRST_D3);
err = snd_hdac_display_power(bus, false);
if (err < 0) {
dev_err(bus->dev, "Cannot turn on display power on i915\n");
@@ -1616,9 +1605,8 @@ static int hdac_hdmi_runtime_resume(struct device *dev)
hdac_hdmi_skl_enable_dp12(&edev->hdac);
/* Power up afg */
- if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0))
- snd_hdac_codec_write(hdac, hdac->afg, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+ snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE,
+ AC_PWRST_D0);
return 0;
}
@@ -1629,6 +1617,8 @@ static int hdac_hdmi_runtime_resume(struct device *dev)
static const struct dev_pm_ops hdac_hdmi_pm = {
SET_RUNTIME_PM_OPS(hdac_hdmi_runtime_suspend, hdac_hdmi_runtime_resume, NULL)
+ .prepare = hdmi_codec_prepare,
+ .complete = hdmi_codec_complete,
};
static const struct hda_device_id hdmi_list[] = {