summaryrefslogtreecommitdiff
path: root/sound/usb
diff options
context:
space:
mode:
Diffstat (limited to 'sound/usb')
-rw-r--r--sound/usb/format.c3
-rw-r--r--sound/usb/midi.c82
-rw-r--r--sound/usb/mixer_quirks.c51
-rw-r--r--sound/usb/quirks.c5
-rw-r--r--sound/usb/usx2y/usbusx2y.c11
-rw-r--r--sound/usb/usx2y/usbusx2y.h26
-rw-r--r--sound/usb/usx2y/usbusx2yaudio.c27
7 files changed, 170 insertions, 35 deletions
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 3b3a5ea6fcbf..f33d25a4e4cc 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -263,7 +263,8 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
}
/* Jabra Evolve 65 headset */
- if (chip->usb_id == USB_ID(0x0b0e, 0x030b)) {
+ if (chip->usb_id == USB_ID(0x0b0e, 0x030b) ||
+ chip->usb_id == USB_ID(0x0b0e, 0x030c)) {
/* only 48kHz for playback while keeping 16kHz for capture */
if (fp->nr_rates != 1)
return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000);
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 9a361b202a09..c6586da43a04 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -489,16 +489,84 @@ static void ch345_broken_sysex_input(struct snd_usb_midi_in_endpoint *ep,
/*
* CME protocol: like the standard protocol, but SysEx commands are sent as a
- * single USB packet preceded by a 0x0F byte.
+ * single USB packet preceded by a 0x0F byte, as are system realtime
+ * messages and MIDI Active Sensing.
+ * Also, multiple messages can be sent in the same packet.
*/
static void snd_usbmidi_cme_input(struct snd_usb_midi_in_endpoint *ep,
uint8_t *buffer, int buffer_length)
{
- if (buffer_length < 2 || (buffer[0] & 0x0f) != 0x0f)
- snd_usbmidi_standard_input(ep, buffer, buffer_length);
- else
- snd_usbmidi_input_data(ep, buffer[0] >> 4,
- &buffer[1], buffer_length - 1);
+ int remaining = buffer_length;
+
+ /*
+ * CME send sysex, song position pointer, system realtime
+ * and active sensing using CIN 0x0f, which in the standard
+ * is only intended for single byte unparsed data.
+ * So we need to interpret these here before sending them on.
+ * By default, we assume single byte data, which is true
+ * for system realtime (midi clock, start, stop and continue)
+ * and active sensing, and handle the other (known) cases
+ * separately.
+ * In contrast to the standard, CME does not split sysex
+ * into multiple 4-byte packets, but lumps everything together
+ * into one. In addition, CME can string multiple messages
+ * together in the same packet; pressing the Record button
+ * on an UF6 sends a sysex message directly followed
+ * by a song position pointer in the same packet.
+ * For it to have any reasonable meaning, a sysex message
+ * needs to be at least 3 bytes in length (0xf0, id, 0xf7),
+ * corresponding to a packet size of 4 bytes, and the ones sent
+ * by CME devices are 6 or 7 bytes, making the packet fragments
+ * 7 or 8 bytes long (six or seven bytes plus preceding CN+CIN byte).
+ * For the other types, the packet size is always 4 bytes,
+ * as per the standard, with the data size being 3 for SPP
+ * and 1 for the others.
+ * Thus all packet fragments are at least 4 bytes long, so we can
+ * skip anything that is shorter; this also conveniantly skips
+ * packets with size 0, which CME devices continuously send when
+ * they have nothing better to do.
+ * Another quirk is that sometimes multiple messages are sent
+ * in the same packet. This has been observed for midi clock
+ * and active sensing i.e. 0x0f 0xf8 0x00 0x00 0x0f 0xfe 0x00 0x00,
+ * but also multiple note ons/offs, and control change together
+ * with MIDI clock. Similarly, some sysex messages are followed by
+ * the song position pointer in the same packet, and occasionally
+ * additionally by a midi clock or active sensing.
+ * We handle this by looping over all data and parsing it along the way.
+ */
+ while (remaining >= 4) {
+ int source_length = 4; /* default */
+
+ if ((buffer[0] & 0x0f) == 0x0f) {
+ int data_length = 1; /* default */
+
+ if (buffer[1] == 0xf0) {
+ /* Sysex: Find EOX and send on whole message. */
+ /* To kick off the search, skip the first
+ * two bytes (CN+CIN and SYSEX (0xf0).
+ */
+ uint8_t *tmp_buf = buffer + 2;
+ int tmp_length = remaining - 2;
+
+ while (tmp_length > 1 && *tmp_buf != 0xf7) {
+ tmp_buf++;
+ tmp_length--;
+ }
+ data_length = tmp_buf - buffer;
+ source_length = data_length + 1;
+ } else if (buffer[1] == 0xf2) {
+ /* Three byte song position pointer */
+ data_length = 3;
+ }
+ snd_usbmidi_input_data(ep, buffer[0] >> 4,
+ &buffer[1], data_length);
+ } else {
+ /* normal channel events */
+ snd_usbmidi_standard_input(ep, buffer, source_length);
+ }
+ buffer += source_length;
+ remaining -= source_length;
+ }
}
/*
@@ -1145,7 +1213,7 @@ static int snd_usbmidi_output_close(struct snd_rawmidi_substream *substream)
{
struct usbmidi_out_port *port = substream->runtime->private_data;
- cancel_work_sync(&port->ep->work);
+ flush_work(&port->ep->work);
return substream_open(substream, 0, 0);
}
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index e45f3d3e11b4..5eccc8af839f 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -3553,6 +3553,52 @@ static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer,
}
}
+/*
+ * Some Plantronics headsets have control names that don't meet ALSA naming
+ * standards. This function fixes nonstandard source names. By the time
+ * this function is called the control name should look like one of these:
+ * "source names Playback Volume"
+ * "source names Playback Switch"
+ * "source names Capture Volume"
+ * "source names Capture Switch"
+ * If any of the trigger words are found in the name then the name will
+ * be changed to:
+ * "Headset Playback Volume"
+ * "Headset Playback Switch"
+ * "Headset Capture Volume"
+ * "Headset Capture Switch"
+ * depending on the current suffix.
+ */
+static void snd_fix_plt_name(struct snd_usb_audio *chip,
+ struct snd_ctl_elem_id *id)
+{
+ /* no variant of "Sidetone" should be added to this list */
+ static const char * const trigger[] = {
+ "Earphone", "Microphone", "Receive", "Transmit"
+ };
+ static const char * const suffix[] = {
+ " Playback Volume", " Playback Switch",
+ " Capture Volume", " Capture Switch"
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(trigger); i++)
+ if (strstr(id->name, trigger[i]))
+ goto triggered;
+ usb_audio_dbg(chip, "no change in %s\n", id->name);
+ return;
+
+triggered:
+ for (i = 0; i < ARRAY_SIZE(suffix); i++)
+ if (strstr(id->name, suffix[i])) {
+ usb_audio_dbg(chip, "fixing kctl name %s\n", id->name);
+ snprintf(id->name, sizeof(id->name), "Headset%s",
+ suffix[i]);
+ return;
+ }
+ usb_audio_dbg(chip, "something wrong in kctl name %s\n", id->name);
+}
+
void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
struct usb_mixer_elem_info *cval, int unitid,
struct snd_kcontrol *kctl)
@@ -3570,5 +3616,10 @@ void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
cval->min_mute = 1;
break;
}
+
+ /* ALSA-ify some Plantronics headset control names */
+ if (USB_ID_VENDOR(mixer->chip->usb_id) == 0x047f &&
+ (cval->control == UAC_FU_MUTE || cval->control == UAC_FU_VOLUME))
+ snd_fix_plt_name(mixer->chip, &kctl->id);
}
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 8661399e60d5..10430c76475b 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1502,6 +1502,7 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */
subs->stream_offset_adj = 2;
break;
+ case USB_ID(0x2b73, 0x000a): /* Pioneer DJM-900NXS2 */
case USB_ID(0x2b73, 0x0013): /* Pioneer DJM-450 */
pioneer_djm_set_format_quirk(subs, 0x0082);
break;
@@ -1836,6 +1837,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
QUIRK_FLAG_CTL_MSG_DELAY_1M),
DEVICE_FLG(0x0c45, 0x6340, /* Sonix HD USB Camera */
QUIRK_FLAG_GET_SAMPLE_RATE),
+ DEVICE_FLG(0x0d8c, 0x0014, /* USB Audio Device */
+ QUIRK_FLAG_CTL_MSG_DELAY_1M),
DEVICE_FLG(0x0ecb, 0x205c, /* JBL Quantum610 Wireless */
QUIRK_FLAG_FIXED_RATE),
DEVICE_FLG(0x0ecb, 0x2069, /* JBL Quantum810 Wireless */
@@ -1932,6 +1935,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
QUIRK_FLAG_CTL_MSG_DELAY_1M),
DEVICE_FLG(0x2d95, 0x8021, /* VIVO USB-C-XE710 HEADSET */
QUIRK_FLAG_CTL_MSG_DELAY_1M),
+ DEVICE_FLG(0x2fc6, 0xf0b7, /* iBasso DC07 Pro */
+ QUIRK_FLAG_CTL_MSG_DELAY_1M),
DEVICE_FLG(0x30be, 0x0101, /* Schiit Hel */
QUIRK_FLAG_IGNORE_CTL_ERROR),
DEVICE_FLG(0x413c, 0xa506, /* Dell AE515 sound bar */
diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index c3292afa883e..b8f0c0298f14 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -151,6 +151,12 @@ static int snd_usx2y_card_used[SNDRV_CARDS];
static void snd_usx2y_card_private_free(struct snd_card *card);
static void usx2y_unlinkseq(struct snd_usx2y_async_seq *s);
+#ifdef USX2Y_NRPACKS_VARIABLE
+int nrpacks = USX2Y_NRPACKS; /* number of packets per urb */
+module_param(nrpacks, int, 0444);
+MODULE_PARM_DESC(nrpacks, "Number of packets per URB.");
+#endif
+
/*
* pipe 4 is used for switching the lamps, setting samplerate, volumes ....
*/
@@ -433,6 +439,11 @@ static int snd_usx2y_probe(struct usb_interface *intf,
struct snd_card *card;
int err;
+#ifdef USX2Y_NRPACKS_VARIABLE
+ if (nrpacks < 0 || nrpacks > USX2Y_NRPACKS_MAX)
+ return -EINVAL;
+#endif
+
if (le16_to_cpu(device->descriptor.idVendor) != 0x1604 ||
(le16_to_cpu(device->descriptor.idProduct) != USB_ID_US122 &&
le16_to_cpu(device->descriptor.idProduct) != USB_ID_US224 &&
diff --git a/sound/usb/usx2y/usbusx2y.h b/sound/usb/usx2y/usbusx2y.h
index 8d82f5cc2fe1..0538c457921e 100644
--- a/sound/usb/usx2y/usbusx2y.h
+++ b/sound/usb/usx2y/usbusx2y.h
@@ -7,6 +7,32 @@
#define NRURBS 2
+/* Default value used for nr of packs per urb.
+ * 1 to 4 have been tested ok on uhci.
+ * To use 3 on ohci, you'd need a patch:
+ * look for "0000425-linux-2.6.9-rc4-mm1_ohci-hcd.patch.gz" on
+ * "https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000425"
+ *
+ * 1, 2 and 4 work out of the box on ohci, if I recall correctly.
+ * Bigger is safer operation, smaller gives lower latencies.
+ */
+#define USX2Y_NRPACKS 4
+
+#define USX2Y_NRPACKS_MAX 1024
+
+/* If your system works ok with this module's parameter
+ * nrpacks set to 1, you might as well comment
+ * this define out, and thereby produce smaller, faster code.
+ * You'd also set USX2Y_NRPACKS to 1 then.
+ */
+#define USX2Y_NRPACKS_VARIABLE 1
+
+#ifdef USX2Y_NRPACKS_VARIABLE
+extern int nrpacks;
+#define nr_of_packs() nrpacks
+#else
+#define nr_of_packs() USX2Y_NRPACKS
+#endif
#define URBS_ASYNC_SEQ 10
#define URB_DATA_LEN_ASYNC_SEQ 32
diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c
index c39cc6851e2d..a6ed4f0230b7 100644
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -28,33 +28,6 @@
#include "usx2y.h"
#include "usbusx2y.h"
-/* Default value used for nr of packs per urb.
- * 1 to 4 have been tested ok on uhci.
- * To use 3 on ohci, you'd need a patch:
- * look for "0000425-linux-2.6.9-rc4-mm1_ohci-hcd.patch.gz" on
- * "https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000425"
- *
- * 1, 2 and 4 work out of the box on ohci, if I recall correctly.
- * Bigger is safer operation, smaller gives lower latencies.
- */
-#define USX2Y_NRPACKS 4
-
-/* If your system works ok with this module's parameter
- * nrpacks set to 1, you might as well comment
- * this define out, and thereby produce smaller, faster code.
- * You'd also set USX2Y_NRPACKS to 1 then.
- */
-#define USX2Y_NRPACKS_VARIABLE 1
-
-#ifdef USX2Y_NRPACKS_VARIABLE
-static int nrpacks = USX2Y_NRPACKS; /* number of packets per urb */
-#define nr_of_packs() nrpacks
-module_param(nrpacks, int, 0444);
-MODULE_PARM_DESC(nrpacks, "Number of packets per URB.");
-#else
-#define nr_of_packs() USX2Y_NRPACKS
-#endif
-
static int usx2y_urb_capt_retire(struct snd_usx2y_substream *subs)
{
struct urb *urb = subs->completed_urb;
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-05 21:19:21 +0000