diff options
Diffstat (limited to 'sound')
| -rw-r--r-- | sound/pci/hda/hda_intel.c | 38 |
1 files changed, 36 insertions, 2 deletions
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 20512fe32a97..e2212830df0c 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -179,7 +179,7 @@ static const struct kernel_param_ops param_ops_xint = { }; #define param_check_xint param_check_int -static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; +static int power_save = -1; module_param(power_save, xint, 0644); MODULE_PARM_DESC(power_save, "Automatic power-saving timeout " "(in second, 0 = disable)."); @@ -2055,6 +2055,24 @@ out_free: return err; } +#ifdef CONFIG_PM +/* On some boards setting power_save to a non 0 value leads to clicking / + * popping sounds when ever we enter/leave powersaving mode. Ideally we would + * figure out how to avoid these sounds, but that is not always feasible. + * So we keep a list of devices where we disable powersaving as its known + * to causes problems on these devices. + */ +static struct snd_pci_quirk power_save_blacklist[] = { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0), + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0), + /* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */ + SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0), + {} +}; +#endif /* CONFIG_PM */ + /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */ static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = { [AZX_DRIVER_NVIDIA] = 8, @@ -2067,6 +2085,7 @@ static int azx_probe_continue(struct azx *chip) struct hdac_bus *bus = azx_bus(chip); struct pci_dev *pci = chip->pci; int dev = chip->dev_index; + int val; int err; hda->probe_continued = 1; @@ -2142,7 +2161,22 @@ static int azx_probe_continue(struct azx *chip) chip->running = 1; azx_add_card_list(chip); - snd_hda_set_power_save(&chip->bus, power_save * 1000); + + val = power_save; +#ifdef CONFIG_PM + if (val == -1) { + const struct snd_pci_quirk *q; + + val = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; + q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist); + if (q && val) { + dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n", + q->subvendor, q->subdevice); + val = 0; + } + } +#endif /* CONFIG_PM */ + snd_hda_set_power_save(&chip->bus, val * 1000); if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo) pm_runtime_put_noidle(&pci->dev); |