diff options
Diffstat (limited to 'tools/perf/Documentation/intel-pt.txt')
| -rw-r--r-- | tools/perf/Documentation/intel-pt.txt | 766 |
1 files changed, 766 insertions, 0 deletions
diff --git a/tools/perf/Documentation/intel-pt.txt b/tools/perf/Documentation/intel-pt.txt new file mode 100644 index 000000000000..4a0501d7a3b4 --- /dev/null +++ b/tools/perf/Documentation/intel-pt.txt @@ -0,0 +1,766 @@ +Intel Processor Trace +===================== + +Overview +======== + +Intel Processor Trace (Intel PT) is an extension of Intel Architecture that +collects information about software execution such as control flow, execution +modes and timings and formats it into highly compressed binary packets. +Technical details are documented in the Intel 64 and IA-32 Architectures +Software Developer Manuals, Chapter 36 Intel Processor Trace. + +Intel PT is first supported in Intel Core M and 5th generation Intel Core +processors that are based on the Intel micro-architecture code name Broadwell. + +Trace data is collected by 'perf record' and stored within the perf.data file. +See below for options to 'perf record'. + +Trace data must be 'decoded' which involves walking the object code and matching +the trace data packets. For example a TNT packet only tells whether a +conditional branch was taken or not taken, so to make use of that packet the +decoder must know precisely which instruction was being executed. + +Decoding is done on-the-fly. The decoder outputs samples in the same format as +samples output by perf hardware events, for example as though the "instructions" +or "branches" events had been recorded. Presently 3 tools support this: +'perf script', 'perf report' and 'perf inject'. See below for more information +on using those tools. + +The main distinguishing feature of Intel PT is that the decoder can determine +the exact flow of software execution. Intel PT can be used to understand why +and how did software get to a certain point, or behave a certain way. The +software does not have to be recompiled, so Intel PT works with debug or release +builds, however the executed images are needed - which makes use in JIT-compiled +environments, or with self-modified code, a challenge. Also symbols need to be +provided to make sense of addresses. + +A limitation of Intel PT is that it produces huge amounts of trace data +(hundreds of megabytes per second per core) which takes a long time to decode, +for example two or three orders of magnitude longer than it took to collect. +Another limitation is the performance impact of tracing, something that will +vary depending on the use-case and architecture. + + +Quickstart +========== + +It is important to start small. That is because it is easy to capture vastly +more data than can possibly be processed. + +The simplest thing to do with Intel PT is userspace profiling of small programs. +Data is captured with 'perf record' e.g. to trace 'ls' userspace-only: + + perf record -e intel_pt//u ls + +And profiled with 'perf report' e.g. + + perf report + +To also trace kernel space presents a problem, namely kernel self-modifying +code. A fairly good kernel image is available in /proc/kcore but to get an +accurate image a copy of /proc/kcore needs to be made under the same conditions +as the data capture. A script perf-with-kcore can do that, but beware that the +script makes use of 'sudo' to copy /proc/kcore. If you have perf installed +locally from the source tree you can do: + + ~/libexec/perf-core/perf-with-kcore record pt_ls -e intel_pt// -- ls + +which will create a directory named 'pt_ls' and put the perf.data file and +copies of /proc/kcore, /proc/kallsyms and /proc/modules into it. Then to use +'perf report' becomes: + + ~/libexec/perf-core/perf-with-kcore report pt_ls + +Because samples are synthesized after-the-fact, the sampling period can be +selected for reporting. e.g. sample every microsecond + + ~/libexec/perf-core/perf-with-kcore report pt_ls --itrace=i1usge + +See the sections below for more information about the --itrace option. + +Beware the smaller the period, the more samples that are produced, and the +longer it takes to process them. + +Also note that the coarseness of Intel PT timing information will start to +distort the statistical value of the sampling as the sampling period becomes +smaller. + +To represent software control flow, "branches" samples are produced. By default +a branch sample is synthesized for every single branch. To get an idea what +data is available you can use the 'perf script' tool with no parameters, which +will list all the samples. + + perf record -e intel_pt//u ls + perf script + +An interesting field that is not printed by default is 'flags' which can be +displayed as follows: + + perf script -Fcomm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,flags + +The flags are "bcrosyiABEx" which stand for branch, call, return, conditional, +system, asynchronous, interrupt, transaction abort, trace begin, trace end, and +in transaction, respectively. + +While it is possible to create scripts to analyze the data, an alternative +approach is available to export the data to a postgresql database. Refer to +script export-to-postgresql.py for more details, and to script +call-graph-from-postgresql.py for an example of using the database. + +As mentioned above, it is easy to capture too much data. One way to limit the +data captured is to use 'snapshot' mode which is explained further below. +Refer to 'new snapshot option' and 'Intel PT modes of operation' further below. + +Another problem that will be experienced is decoder errors. They can be caused +by inability to access the executed image, self-modified or JIT-ed code, or the +inability to match side-band information (such as context switches and mmaps) +which results in the decoder not knowing what code was executed. + +There is also the problem of perf not being able to copy the data fast enough, +resulting in data lost because the buffer was full. See 'Buffer handling' below +for more details. + + +perf record +=========== + +new event +--------- + +The Intel PT kernel driver creates a new PMU for Intel PT. PMU events are +selected by providing the PMU name followed by the "config" separated by slashes. +An enhancement has been made to allow default "config" e.g. the option + + -e intel_pt// + +will use a default config value. Currently that is the same as + + -e intel_pt/tsc,noretcomp=0/ + +which is the same as + + -e intel_pt/tsc=1,noretcomp=0/ + +Note there are now new config terms - see section 'config terms' further below. + +The config terms are listed in /sys/devices/intel_pt/format. They are bit +fields within the config member of the struct perf_event_attr which is +passed to the kernel by the perf_event_open system call. They correspond to bit +fields in the IA32_RTIT_CTL MSR. Here is a list of them and their definitions: + + $ grep -H . /sys/bus/event_source/devices/intel_pt/format/* + /sys/bus/event_source/devices/intel_pt/format/cyc:config:1 + /sys/bus/event_source/devices/intel_pt/format/cyc_thresh:config:19-22 + /sys/bus/event_source/devices/intel_pt/format/mtc:config:9 + /sys/bus/event_source/devices/intel_pt/format/mtc_period:config:14-17 + /sys/bus/event_source/devices/intel_pt/format/noretcomp:config:11 + /sys/bus/event_source/devices/intel_pt/format/psb_period:config:24-27 + /sys/bus/event_source/devices/intel_pt/format/tsc:config:10 + +Note that the default config must be overridden for each term i.e. + + -e intel_pt/noretcomp=0/ + +is the same as: + + -e intel_pt/tsc=1,noretcomp=0/ + +So, to disable TSC packets use: + + -e intel_pt/tsc=0/ + +It is also possible to specify the config value explicitly: + + -e intel_pt/config=0x400/ + +Note that, as with all events, the event is suffixed with event modifiers: + + u userspace + k kernel + h hypervisor + G guest + H host + p precise ip + +'h', 'G' and 'H' are for virtualization which is not supported by Intel PT. +'p' is also not relevant to Intel PT. So only options 'u' and 'k' are +meaningful for Intel PT. + +perf_event_attr is displayed if the -vv option is used e.g. + + ------------------------------------------------------------ + perf_event_attr: + type 6 + size 112 + config 0x400 + { sample_period, sample_freq } 1 + sample_type IP|TID|TIME|CPU|IDENTIFIER + read_format ID + disabled 1 + inherit 1 + exclude_kernel 1 + exclude_hv 1 + enable_on_exec 1 + sample_id_all 1 + ------------------------------------------------------------ + sys_perf_event_open: pid 31104 cpu 0 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 1 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 2 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 3 group_fd -1 flags 0x8 + ------------------------------------------------------------ + + +config terms +------------ + +The June 2015 version of Intel 64 and IA-32 Architectures Software Developer +Manuals, Chapter 36 Intel Processor Trace, defined new Intel PT features. +Some of the features are reflect in new config terms. All the config terms are +described below. + +tsc Always supported. Produces TSC timestamp packets to provide + timing information. In some cases it is possible to decode + without timing information, for example a per-thread context + that does not overlap executable memory maps. + + The default config selects tsc (i.e. tsc=1). + +noretcomp Always supported. Disables "return compression" so a TIP packet + is produced when a function returns. Causes more packets to be + produced but might make decoding more reliable. + + The default config does not select noretcomp (i.e. noretcomp=0). + +psb_period Allows the frequency of PSB packets to be specified. + + The PSB packet is a synchronization packet that provides a + starting point for decoding or recovery from errors. + + Support for psb_period is indicated by: + + /sys/bus/event_source/devices/intel_pt/caps/psb_cyc + + which contains "1" if the feature is supported and "0" + otherwise. + + Valid values are given by: + + /sys/bus/event_source/devices/intel_pt/caps/psb_periods + + which contains a hexadecimal value, the bits of which represent + valid values e.g. bit 2 set means value 2 is valid. + + The psb_period value is converted to the approximate number of + trace bytes between PSB packets as: + + 2 ^ (value + 11) + + e.g. value 3 means 16KiB bytes between PSBs + + If an invalid value is entered, the error message + will give a list of valid values e.g. + + $ perf record -e intel_pt/psb_period=15/u uname + Invalid psb_period for intel_pt. Valid values are: 0-5 + + If MTC packets are selected, the default config selects a value + of 3 (i.e. psb_period=3) or the nearest lower value that is + supported (0 is always supported). Otherwise the default is 0. + + If decoding is expected to be reliable and the buffer is large + then a large PSB period can be used. + + Because a TSC packet is produced with PSB, the PSB period can + also affect the granularity to timing information in the absence + of MTC or CYC. + +mtc Produces MTC timing packets. + + MTC packets provide finer grain timestamp information than TSC + packets. MTC packets record time using the hardware crystal + clock (CTC) which is related to TSC packets using a TMA packet. + + Support for this feature is indicated by: + + /sys/bus/event_source/devices/intel_pt/caps/mtc + + which contains "1" if the feature is supported and + "0" otherwise. + + The frequency of MTC packets can also be specified - see + mtc_period below. + +mtc_period Specifies how frequently MTC packets are produced - see mtc + above for how to determine if MTC packets are supported. + + Valid values are given by: + + /sys/bus/event_source/devices/intel_pt/caps/mtc_periods + + which contains a hexadecimal value, the bits of which represent + valid values e.g. bit 2 set means value 2 is valid. + + The mtc_period value is converted to the MTC frequency as: + + CTC-frequency / (2 ^ value) + + e.g. value 3 means one eighth of CTC-frequency + + Where CTC is the hardware crystal clock, the frequency of which + can be related to TSC via values provided in cpuid leaf 0x15. + + If an invalid value is entered, the error message + will give a list of valid values e.g. + + $ perf record -e intel_pt/mtc_period=15/u uname + Invalid mtc_period for intel_pt. Valid values are: 0,3,6,9 + + The default value is 3 or the nearest lower value + that is supported (0 is always supported). + +cyc Produces CYC timing packets. + + CYC packets provide even finer grain timestamp information than + MTC and TSC packets. A CYC packet contains the number of CPU + cycles since the last CYC packet. Unlike MTC and TSC packets, + CYC packets are only sent when another packet is also sent. + + Support for this feature is indicated by: + + /sys/bus/event_source/devices/intel_pt/caps/psb_cyc + + which contains "1" if the feature is supported and + "0" otherwise. + + The number of CYC packets produced can be reduced by specifying + a threshold - see cyc_thresh below. + +cyc_thresh Specifies how frequently CYC packets are produced - see cyc + above for how to determine if CYC packets are supported. + + Valid cyc_thresh values are given by: + + /sys/bus/event_source/devices/intel_pt/caps/cycle_thresholds + + which contains a hexadecimal value, the bits of which represent + valid values e.g. bit 2 set means value 2 is valid. + + The cyc_thresh value represents the minimum number of CPU cycles + that must have passed before a CYC packet can be sent. The + number of CPU cycles is: + + 2 ^ (value - 1) + + e.g. value 4 means 8 CPU cycles must pass before a CYC packet + can be sent. Note a CYC packet is still only sent when another + packet is sent, not at, e.g. every 8 CPU cycles. + + If an invalid value is entered, the error message + will give a list of valid values e.g. + + $ perf record -e intel_pt/cyc,cyc_thresh=15/u uname + Invalid cyc_thresh for intel_pt. Valid values are: 0-12 + + CYC packets are not requested by default. + +no_force_psb This is a driver option and is not in the IA32_RTIT_CTL MSR. + + It stops the driver resetting the byte count to zero whenever + enabling the trace (for example on context switches) which in + turn results in no PSB being forced. However some processors + will produce a PSB anyway. + + In any case, there is still a PSB when the trace is enabled for + the first time. + + no_force_psb can be used to slightly decrease the trace size but + may make it harder for the decoder to recover from errors. + + no_force_psb is not selected by default. + + +new snapshot option +------------------- + +The difference between full trace and snapshot from the kernel's perspective is +that in full trace we don't overwrite trace data that the user hasn't collected +yet (and indicated that by advancing aux_tail), whereas in snapshot mode we let +the trace run and overwrite older data in the buffer so that whenever something +interesting happens, we can stop it and grab a snapshot of what was going on +around that interesting moment. + +To select snapshot mode a new option has been added: + + -S + +Optionally it can be followed by the snapshot size e.g. + + -S0x100000 + +The default snapshot size is the auxtrace mmap size. If neither auxtrace mmap size +nor snapshot size is specified, then the default is 4MiB for privileged users +(or if /proc/sys/kernel/perf_event_paranoid < 0), 128KiB for unprivileged users. +If an unprivileged user does not specify mmap pages, the mmap pages will be +reduced as described in the 'new auxtrace mmap size option' section below. + +The snapshot size is displayed if the option -vv is used e.g. + + Intel PT snapshot size: %zu + + +new auxtrace mmap size option +--------------------------- + +Intel PT buffer size is specified by an addition to the -m option e.g. + + -m,16 + +selects a buffer size of 16 pages i.e. 64KiB. + +Note that the existing functionality of -m is unchanged. The auxtrace mmap size +is specified by the optional addition of a comma and the value. + +The default auxtrace mmap size for Intel PT is 4MiB/page_size for privileged users +(or if /proc/sys/kernel/perf_event_paranoid < 0), 128KiB for unprivileged users. +If an unprivileged user does not specify mmap pages, the mmap pages will be +reduced from the default 512KiB/page_size to 256KiB/page_size, otherwise the +user is likely to get an error as they exceed their mlock limit (Max locked +memory as shown in /proc/self/limits). Note that perf does not count the first +512KiB (actually /proc/sys/kernel/perf_event_mlock_kb minus 1 page) per cpu +against the mlock limit so an unprivileged user is allowed 512KiB per cpu plus +their mlock limit (which defaults to 64KiB but is not multiplied by the number +of cpus). + +In full-trace mode, powers of two are allowed for buffer size, with a minimum +size of 2 pages. In snapshot mode, it is the same but the minimum size is +1 page. + +The mmap size and auxtrace mmap size are displayed if the -vv option is used e.g. + + mmap length 528384 + auxtrace mmap length 4198400 + + +Intel PT modes of operation +--------------------------- + +Intel PT can be used in 2 modes: + full-trace mode + snapshot mode + +Full-trace mode traces continuously e.g. + + perf record -e intel_pt//u uname + +Snapshot mode captures the available data when a signal is sent e.g. + + perf record -v -e intel_pt//u -S ./loopy 1000000000 & + [1] 11435 + kill -USR2 11435 + Recording AUX area tracing snapshot + +Note that the signal sent is SIGUSR2. +Note that "Recording AUX area tracing snapshot" is displayed because the -v +option is used. + +The 2 modes cannot be used together. + + +Buffer handling +--------------- + +There may be buffer limitations (i.e. single ToPa entry) which means that actual +buffer sizes are limited to powers of 2 up to 4MiB (MAX_ORDER). In order to +provide other sizes, and in particular an arbitrarily large size, multiple +buffers are logically concatenated. However an interrupt must be used to switch +between buffers. That has two potential problems: + a) the interrupt may not be handled in time so that the current buffer + becomes full and some trace data is lost. + b) the interrupts may slow the system and affect the performance + results. + +If trace data is lost, the driver sets 'truncated' in the PERF_RECORD_AUX event +which the tools report as an error. + +In full-trace mode, the driver waits for data to be copied out before allowing +the (logical) buffer to wrap-around. If data is not copied out quickly enough, +again 'truncated' is set in the PERF_RECORD_AUX event. If the driver has to +wait, the intel_pt event gets disabled. Because it is difficult to know when +that happens, perf tools always re-enable the intel_pt event after copying out +data. + + +Intel PT and build ids +---------------------- + +By default "perf record" post-processes the event stream to find all build ids +for executables for all addresses sampled. Deliberately, Intel PT is not +decoded for that purpose (it would take too long). Instead the build ids for +all executables encountered (due to mmap, comm or task events) are included +in the perf.data file. + +To see buildids included in the perf.data file use the command: + + perf buildid-list + +If the perf.data file contains Intel PT data, that is the same as: + + perf buildid-list --with-hits + + +Snapshot mode and event disabling +--------------------------------- + +In order to make a snapshot, the intel_pt event is disabled using an IOCTL, +namely PERF_EVENT_IOC_DISABLE. However doing that can also disable the +collection of side-band information. In order to prevent that, a dummy +software event has been introduced that permits tracking events (like mmaps) to +continue to be recorded while intel_pt is disabled. That is important to ensure +there is complete side-band information to allow the decoding of subsequent +snapshots. + +A test has been created for that. To find the test: + + perf test list + ... + 23: Test using a dummy software event to keep tracking + +To run the test: + + perf test 23 + 23: Test using a dummy software event to keep tracking : Ok + + +perf record modes (nothing new here) +------------------------------------ + +perf record essentially operates in one of three modes: + per thread + per cpu + workload only + +"per thread" mode is selected by -t or by --per-thread (with -p or -u or just a +workload). +"per cpu" is selected by -C or -a. +"workload only" mode is selected by not using the other options but providing a +command to run (i.e. the workload). + +In per-thread mode an exact list of threads is traced. There is no inheritance. +Each thread has its own event buffer. + +In per-cpu mode all processes (or processes from the selected cgroup i.e. -G +option, or processes selected with -p or -u) are traced. Each cpu has its own +buffer. Inheritance is allowed. + +In workload-only mode, the workload is traced but with per-cpu buffers. +Inheritance is allowed. Note that you can now trace a workload in per-thread +mode by using the --per-thread option. + + +Privileged vs non-privileged users +---------------------------------- + +Unless /proc/sys/kernel/perf_event_paranoid is set to -1, unprivileged users +have memory limits imposed upon them. That affects what buffer sizes they can +have as outlined above. + +Unless /proc/sys/kernel/perf_event_paranoid is set to -1, unprivileged users are +not permitted to use tracepoints which means there is insufficient side-band +information to decode Intel PT in per-cpu mode, and potentially workload-only +mode too if the workload creates new processes. + +Note also, that to use tracepoints, read-access to debugfs is required. So if +debugfs is not mounted or the user does not have read-access, it will again not +be possible to decode Intel PT in per-cpu mode. + + +sched_switch tracepoint +----------------------- + +The sched_switch tracepoint is used to provide side-band data for Intel PT +decoding. sched_switch events are automatically added. e.g. the second event +shown below + + $ perf record -vv -e intel_pt//u uname + ------------------------------------------------------------ + perf_event_attr: + type 6 + size 112 + config 0x400 + { sample_period, sample_freq } 1 + sample_type IP|TID|TIME|CPU|IDENTIFIER + read_format ID + disabled 1 + inherit 1 + exclude_kernel 1 + exclude_hv 1 + enable_on_exec 1 + sample_id_all 1 + ------------------------------------------------------------ + sys_perf_event_open: pid 31104 cpu 0 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 1 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 2 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 3 group_fd -1 flags 0x8 + ------------------------------------------------------------ + perf_event_attr: + type 2 + size 112 + config 0x108 + { sample_period, sample_freq } 1 + sample_type IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER + read_format ID + inherit 1 + sample_id_all 1 + exclude_guest 1 + ------------------------------------------------------------ + sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 + sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 + sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 + sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 + ------------------------------------------------------------ + perf_event_attr: + type 1 + size 112 + config 0x9 + { sample_period, sample_freq } 1 + sample_type IP|TID|TIME|IDENTIFIER + read_format ID + disabled 1 + inherit 1 + exclude_kernel 1 + exclude_hv 1 + mmap 1 + comm 1 + enable_on_exec 1 + task 1 + sample_id_all 1 + mmap2 1 + comm_exec 1 + ------------------------------------------------------------ + sys_perf_event_open: pid 31104 cpu 0 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 1 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 2 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 3 group_fd -1 flags 0x8 + mmap size 528384B + AUX area mmap length 4194304 + perf event ring buffer mmapped per cpu + Synthesizing auxtrace information + Linux + [ perf record: Woken up 1 times to write data ] + [ perf record: Captured and wrote 0.042 MB perf.data ] + +Note, the sched_switch event is only added if the user is permitted to use it +and only in per-cpu mode. + +Note also, the sched_switch event is only added if TSC packets are requested. +That is because, in the absence of timing information, the sched_switch events +cannot be matched against the Intel PT trace. + + +perf script +=========== + +By default, perf script will decode trace data found in the perf.data file. +This can be further controlled by new option --itrace. + + +New --itrace option +------------------- + +Having no option is the same as + + --itrace + +which, in turn, is the same as + + --itrace=ibxe + +The letters are: + + i synthesize "instructions" events + b synthesize "branches" events + x synthesize "transactions" events + c synthesize branches events (calls only) + r synthesize branches events (returns only) + e synthesize tracing error events + d create a debug log + g synthesize a call chain (use with i or x) + +"Instructions" events look like they were recorded by "perf record -e +instructions". + +"Branches" events look like they were recorded by "perf record -e branches". "c" +and "r" can be combined to get calls and returns. + +"Transactions" events correspond to the start or end of transactions. The +'flags' field can be used in perf script to determine whether the event is a +tranasaction start, commit or abort. + +Error events are new. They show where the decoder lost the trace. Error events +are quite important. Users must know if what they are seeing is a complete +picture or not. + +The "d" option will cause the creation of a file "intel_pt.log" containing all +decoded packets and instructions. Note that this option slows down the decoder +and that the resulting file may be very large. + +In addition, the period of the "instructions" event can be specified. e.g. + + --itrace=i10us + +sets the period to 10us i.e. one instruction sample is synthesized for each 10 +microseconds of trace. Alternatives to "us" are "ms" (milliseconds), +"ns" (nanoseconds), "t" (TSC ticks) or "i" (instructions). + +"ms", "us" and "ns" are converted to TSC ticks. + +The timing information included with Intel PT does not give the time of every +instruction. Consequently, for the purpose of sampling, the decoder estimates +the time since the last timing packet based on 1 tick per instruction. The time +on the sample is *not* adjusted and reflects the last known value of TSC. + +For Intel PT, the default period is 100us. + +Also the call chain size (default 16, max. 1024) for instructions or +transactions events can be specified. e.g. + + --itrace=ig32 + --itrace=xg32 + +To disable trace decoding entirely, use the option --no-itrace. + + +dump option +----------- + +perf script has an option (-D) to "dump" the events i.e. display the binary +data. + +When -D is used, Intel PT packets are displayed. The packet decoder does not +pay attention to PSB packets, but just decodes the bytes - so the packets seen +by the actual decoder may not be identical in places where the data is corrupt. +One example of that would be when the buffer-switching interrupt has been too +slow, and the buffer has been filled completely. In that case, the last packet +in the buffer might be truncated and immediately followed by a PSB as the trace +continues in the next buffer. + +To disable the display of Intel PT packets, combine the -D option with +--no-itrace. + + +perf report +=========== + +By default, perf report will decode trace data found in the perf.data file. +This can be further controlled by new option --itrace exactly the same as +perf script, with the exception that the default is --itrace=igxe. + + +perf inject +=========== + +perf inject also accepts the --itrace option in which case tracing data is +removed and replaced with the synthesized events. e.g. + + perf inject --itrace -i perf.data -o perf.data.new |