6 files changed, 503 insertions, 0 deletions

diff --git a/tools/power/cpupower/man/cpupower-frequency-info.1 b/tools/power/cpupower/man/cpupower-frequency-info.1
new file mode 100644
index 000000000000..3194811d58f5
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-frequency-info.1
@@ -0,0 +1,76 @@
+.TH "cpufreq-info" "1" "0.1" "Mattia Dongili" ""
+.SH "NAME"
+.LP 
+cpufreq\-info \- Utility to retrieve cpufreq kernel information
+.SH "SYNTAX"
+.LP 
+cpufreq\-info [\fIoptions\fP]
+.SH "DESCRIPTION"
+.LP 
+A small tool which prints out cpufreq information helpful to developers and interested users.
+.SH "OPTIONS"
+.LP 
+.TP  
+\fB\-e\fR \fB\-\-debug\fR
+Prints out debug information.
+.TP  
+\fB\-f\fR \fB\-\-freq\fR
+Get frequency the CPU currently runs at, according to the cpufreq core.
+.TP  
+\fB\-w\fR \fB\-\-hwfreq\fR
+Get frequency the CPU currently runs at, by reading it from hardware (only available to root).
+.TP  
+\fB\-l\fR \fB\-\-hwlimits\fR
+Determine the minimum and maximum CPU frequency allowed.
+.TP  
+\fB\-d\fR \fB\-\-driver\fR
+Determines the used cpufreq kernel driver.
+.TP  
+\fB\-p\fR \fB\-\-policy\fR
+Gets the currently used cpufreq policy.
+.TP  
+\fB\-g\fR \fB\-\-governors\fR
+Determines available cpufreq governors.
+.TP  
+\fB\-a\fR \fB\-\-related\-cpus\fR
+Determines which CPUs run at the same hardware frequency.
+.TP  
+\fB\-a\fR \fB\-\-affected\-cpus\fR
+Determines which CPUs need to have their frequency coordinated by software.
+.TP  
+\fB\-s\fR \fB\-\-stats\fR
+Shows cpufreq statistics if available.
+.TP  
+\fB\-y\fR \fB\-\-latency\fR
+Determines the maximum latency on CPU frequency changes.
+.TP  
+\fB\-o\fR \fB\-\-proc\fR
+Prints out information like provided by the /proc/cpufreq interface in 2.4. and early 2.6. kernels.
+.TP  
+\fB\-m\fR \fB\-\-human\fR
+human\-readable output for the \-f, \-w, \-s and \-y parameters.
+.TP  
+\fB\-h\fR \fB\-\-help\fR
+Prints out the help screen.
+.SH "REMARKS"
+.LP 
+By default only values of core zero are displayed. How to display settings of
+other cores is described in the cpupower(1) manpage in the \-\-cpu option section.
+.LP 
+You can't specify more than one of the output specific options \-o \-e \-a \-g \-p \-d \-l \-w \-f \-y.
+.LP 
+You also can't specify the \-o option combined with the \-c option.
+.SH "FILES"
+.nf 
+\fI/sys/devices/system/cpu/cpu*/cpufreq/\fP  
+\fI/proc/cpufreq\fP (deprecated) 
+\fI/proc/sys/cpu/\fP (deprecated)
+.fi 
+.SH "AUTHORS"
+.nf
+Dominik Brodowski <linux@brodo.de> \- author 
+Mattia Dongili<malattia@gmail.com> \- first autolibtoolization
+.fi
+.SH "SEE ALSO"
+.LP 
+cpupower\-frequency\-set(1), cpupower(1)
diff --git a/tools/power/cpupower/man/cpupower-frequency-set.1 b/tools/power/cpupower/man/cpupower-frequency-set.1
new file mode 100644
index 000000000000..26e3e13eee3b
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-frequency-set.1
@@ -0,0 +1,54 @@
+.TH "cpufreq-set" "1" "0.1" "Mattia Dongili" ""
+.SH "NAME"
+.LP 
+cpufreq\-set \- A small tool which allows to modify cpufreq settings.
+.SH "SYNTAX"
+.LP 
+cpufreq\-set [\fIoptions\fP]
+.SH "DESCRIPTION"
+.LP 
+cpufreq\-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all the time.
+.SH "OPTIONS"
+.LP 
+.TP 
+\fB\-d\fR \fB\-\-min\fR <FREQ>
+new minimum CPU frequency the governor may select.
+.TP 
+\fB\-u\fR \fB\-\-max\fR <FREQ>
+new maximum CPU frequency the governor may select.
+.TP 
+\fB\-g\fR \fB\-\-governor\fR <GOV>
+new cpufreq governor.
+.TP 
+\fB\-f\fR \fB\-\-freq\fR <FREQ>
+specific frequency to be set. Requires userspace governor to be available and loaded.
+.TP 
+\fB\-r\fR \fB\-\-related\fR
+modify all hardware-related CPUs at the same time
+.TP 
+\fB\-h\fR \fB\-\-help\fR
+Prints out the help screen.
+.SH "REMARKS"
+.LP 
+By default values are applied on all cores. How to modify single core
+configurations is described in the cpupower(1) manpage in the \-\-cpu option section.
+.LP 
+The \-f FREQ, \-\-freq FREQ parameter cannot be combined with any other parameter.
+.LP 
+FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz by postfixing the value with the wanted unit name, without any space (frequency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).
+.LP 
+On Linux kernels up to 2.6.29, the \-r or \-\-related parameter is ignored.
+.SH "FILES" 
+.nf
+\fI/sys/devices/system/cpu/cpu*/cpufreq/\fP  
+\fI/proc/cpufreq\fP (deprecated) 
+\fI/proc/sys/cpu/\fP (deprecated)
+.fi 
+.SH "AUTHORS"
+.nf 
+Dominik Brodowski <linux@brodo.de> \- author 
+Mattia Dongili<malattia@gmail.com> \- first autolibtoolization
+.fi
+.SH "SEE ALSO"
+.LP 
+cpupower\-frequency\-info(1), cpupower(1)
diff --git a/tools/power/cpupower/man/cpupower-info.1 b/tools/power/cpupower/man/cpupower-info.1
new file mode 100644
index 000000000000..58e21196f17f
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-info.1
@@ -0,0 +1,19 @@
+.TH CPUPOWER\-INFO "1" "22/02/2011" "" "cpupower Manual"
+.SH NAME
+cpupower\-info \- Shows processor power related kernel or hardware configurations
+.SH SYNOPSIS
+.ft B
+.B cpupower info [ \-b ] [ \-s ] [ \-m ]
+
+.SH DESCRIPTION
+\fBcpupower info \fP shows kernel configurations or processor hardware
+registers affecting processor power saving policies.
+
+Some options are platform wide, some affect single cores. By default values
+of core zero are displayed only. cpupower --cpu all cpuinfo will show the
+settings of all cores, see cpupower(1) how to choose specific cores.
+
+.SH "SEE ALSO"
+Options are described in detail in:
+
+cpupower(1), cpupower-set(1)
diff --git a/tools/power/cpupower/man/cpupower-monitor.1 b/tools/power/cpupower/man/cpupower-monitor.1
new file mode 100644
index 000000000000..d5cfa265c3d3
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-monitor.1
@@ -0,0 +1,179 @@
+.TH CPUPOWER\-MONITOR "1" "22/02/2011" "" "cpupower Manual"
+.SH NAME
+cpupower\-monitor \- Report processor frequency and idle statistics
+.SH SYNOPSIS
+.ft B
+.B cpupower monitor
+.RB "\-l"
+
+.B cpupower monitor
+.RB [ "\-m <mon1>," [ "<mon2>,..." ] ]
+.RB [ "\-i seconds" ]
+.br
+.B cpupower monitor
+.RB [ "\-m <mon1>," [ "<mon2>,..." ] ]
+.RB command
+.br
+.SH DESCRIPTION
+\fBcpupower-monitor \fP reports processor topology, frequency and idle power
+state statistics. Either \fBcommand\fP is forked and
+statistics are printed upon its completion, or statistics are printed periodically.
+
+\fBcpupower-monitor \fP implements independent processor sleep state and
+frequency counters. Some are retrieved from kernel statistics, some are
+directly reading out hardware registers. Use \-l to get an overview which are
+supported on your system.
+
+.SH Options
+.PP
+\-l
+.RS 4
+List available monitors on your system. Additional details about each monitor
+are shown:
+.RS 2
+.IP \(bu
+The name in quotation marks which can be passed to the \-m parameter.
+.IP \(bu
+The number of different counters the monitor supports in brackets.
+.IP \(bu
+The amount of time in seconds the counters might overflow, due to
+implementation constraints.
+.IP \(bu
+The name and a description of each counter and its processor hierarchy level
+coverage in square brackets:
+.RS 4
+.IP \(bu
+[T] \-> Thread
+.IP \(bu
+[C] \-> Core
+.IP \(bu
+[P] \-> Processor Package (Socket)
+.IP \(bu
+[M] \-> Machine/Platform wide counter
+.RE
+.RE
+.RE
+.PP
+\-m <mon1>,<mon2>,...
+.RS 4
+Only display specific monitors. Use the monitor string(s) provided by \-l option.
+.RE
+.PP
+\-i seconds
+.RS 4
+Measure intervall.
+.RE
+.PP
+command
+.RS 4
+Measure idle and frequency characteristics of an arbitrary command/workload.
+The executable \fBcommand\fP is forked and upon its exit, statistics gathered since it was
+forked are displayed.
+.RE
+.PP
+\-v
+.RS 4
+Increase verbosity if the binary was compiled with the DEBUG option set.
+.RE
+
+.SH MONITOR DESCRIPTIONS
+.SS "Idle_Stats"
+Shows statistics of the cpuidle kernel subsystem. Values are retrieved from
+/sys/devices/system/cpu/cpu*/cpuidle/state*/.
+The kernel updates these values every time an idle state is entered or
+left. Therefore there can be some inaccuracy when cores are in an idle
+state for some time when the measure starts or ends. In worst case it can happen
+that one core stayed in an idle state for the whole measure time and the idle
+state usage time as exported by the kernel did not get updated. In this case
+a state residency of 0 percent is shown while it was 100.
+
+.SS "Mperf"
+The name comes from the aperf/mperf (average and maximum) MSR registers used
+which are available on recent X86 processors. It shows the average frequency
+(including boost frequencies).
+The fact that on all recent hardware the mperf timer stops ticking in any idle
+state it is also used to show C0 (processor is active) and Cx (processor is in
+any sleep state) times. These counters do not have the inaccuracy restrictions
+the "Idle_Stats" counters may show.
+May work poorly on Linux-2.6.20 through 2.6.29, as the \fBacpi-cpufreq \fP
+kernel frequency driver periodically cleared aperf/mperf registers in those
+kernels.
+
+.SS "Nehalem" "SandyBridge"
+Intel Core and Package sleep state counters.
+Threads (hyperthreaded cores) may not be able to enter deeper core states if
+its sibling is utilized.
+Deepest package sleep states may in reality show up as machine/platform wide
+sleep states and can only be entered if all cores are idle. Look up Intel
+manuals (some are provided in the References section) for further details.
+
+.SS "Ontario" "Liano"
+AMD laptop and desktop processor (family 12h and 14h) sleep state counters.
+The registers are accessed via PCI and therefore can still be read out while
+cores have been offlined.
+
+There is one special counter: NBP1 (North Bridge P1).
+This one always returns 0 or 1, depending on whether the North Bridge P1
+power state got entered at least once during measure time.
+Being able to enter NBP1 state also depends on graphics power management.
+Therefore this counter can be used to verify whether the graphics' driver
+power management is working as expected.
+
+.SH EXAMPLES
+
+cpupower monitor -l" may show:
+.RS 4
+Monitor "Mperf" (3 states) \- Might overflow after 922000000 s
+
+   ...
+
+Monitor "Idle_Stats" (3 states) \- Might overflow after 4294967295 s
+
+   ...
+
+.RE
+cpupower monitor \-m "Idle_Stats,Mperf" scp /tmp/test /nfs/tmp
+
+Monitor the scp command, show both Mperf and Idle_Stats states counter
+statistics, but in exchanged order.
+
+
+
+.RE
+Be careful that the typical command to fully utilize one CPU by doing:
+
+cpupower monitor cat /dev/zero >/dev/null
+
+Does not work as expected, because the measured output is redirected to
+/dev/null. This could get workarounded by putting the line into an own, tiny
+shell script. Hit CTRL\-c to terminate the command and get the measure output
+displayed.
+
+.SH REFERENCES
+"BIOS and Kernel Developer’s Guide (BKDG) for AMD Family 14h Processors"
+http://support.amd.com/us/Processor_TechDocs/43170.pdf
+
+"Intel® Turbo Boost Technology
+in Intel® Core™ Microarchitecture (Nehalem) Based Processors"
+http://download.intel.com/design/processor/applnots/320354.pdf
+
+"Intel® 64 and IA-32 Architectures Software Developer's Manual
+Volume 3B: System Programming Guide"
+http://www.intel.com/products/processor/manuals
+
+.SH FILES
+.ta
+.nf
+/dev/cpu/*/msr
+/sys/devices/system/cpu/cpu*/cpuidle/state*/.
+.fi
+
+.SH "SEE ALSO"
+powertop(8), msr(4), vmstat(8)
+.PP
+.SH AUTHORS
+.nf
+Written by Thomas Renninger <trenn@suse.de>
+
+Nehalem, SandyBridge monitors and command passing
+based on turbostat.8 from Len Brown <len.brown@intel.com>
diff --git a/tools/power/cpupower/man/cpupower-set.1 b/tools/power/cpupower/man/cpupower-set.1
new file mode 100644
index 000000000000..c4954a9fe4e7
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-set.1
@@ -0,0 +1,103 @@
+.TH CPUPOWER\-SET "1" "22/02/2011" "" "cpupower Manual"
+.SH NAME
+cpupower\-set \- Set processor power related kernel or hardware configurations
+.SH SYNOPSIS
+.ft B
+.B cpupower set [ \-b VAL ] [ \-s VAL ] [ \-m VAL ]
+
+
+.SH DESCRIPTION
+\fBcpupower set \fP sets kernel configurations or directly accesses hardware
+registers affecting processor power saving policies.
+
+Some options are platform wide, some affect single cores. By default values
+are applied on all cores. How to modify single core configurations is
+described in the cpupower(1) manpage in the \-\-cpu option section. Whether an
+option affects the whole system or can be applied to individual cores is
+described in the Options sections.
+
+Use \fBcpupower info \fP to read out current settings and whether they are
+supported on the system at all.
+
+.SH Options
+.PP
+\-\-perf-bias, \-b
+.RS 4
+Sets a register on supported Intel processore which allows software to convey
+its policy for the relative importance of performance versus energy savings to
+the  processor.
+
+The range of valid numbers is 0-15, where 0 is maximum
+performance and 15 is maximum energy efficiency.
+
+The processor uses this information in model-specific ways
+when it must select trade-offs between performance and
+energy efficiency.
+
+This policy hint does not supersede Processor Performance states
+(P-states) or CPU Idle power states (C-states), but allows
+software to have influence where it would otherwise be unable
+to express a preference.
+
+For example, this setting may tell the hardware how
+aggressively or conservatively to control frequency
+in the "turbo range" above the explicitly OS-controlled
+P-state frequency range.  It may also tell the hardware
+how aggressively it should enter the OS requested C-states.
+
+This option can be applied to individual cores only via the \-\-cpu option,
+cpupower(1).
+
+Setting the performance bias value on one CPU can modify the setting on
+related CPUs as well (for example all CPUs on one socket), because of
+hardware restrictions.
+Use \fBcpupower -c all info -b\fP to verify.
+
+This options needs the msr kernel driver (CONFIG_X86_MSR) loaded.
+.RE
+.PP
+\-\-sched\-mc,  \-m [ VAL ]
+.RE
+\-\-sched\-smt, \-s [ VAL ]
+.RS 4
+\-\-sched\-mc utilizes cores in one processor package/socket first before
+processes are scheduled to other processor packages/sockets.
+
+\-\-sched\-smt utilizes thread siblings of one processor core first before
+processes are scheduled to other cores.
+
+The impact on power consumption and performance (positiv or negativ) heavily
+depends on processor support for deep sleep states, frequency scaling and
+frequency boost modes and their dependencies between other thread siblings
+and processor cores.
+
+Taken over from kernel documentation:
+
+Adjust the kernel's multi-core scheduler support.
+
+Possible values are:
+.RS 2
+0 - No power saving load balance (default value)
+
+1 - Fill one thread/core/package first for long running threads
+
+2 - Also bias task wakeups to semi-idle cpu package for power
+savings
+.RE
+
+sched_mc_power_savings is dependent upon SCHED_MC, which is
+itself architecture dependent.
+
+sched_smt_power_savings is dependent upon SCHED_SMT, which
+is itself architecture dependent.
+
+The two files are independent of each other. It is possible
+that one file may be present without the other.
+
+.SH "SEE ALSO"
+cpupower-info(1), cpupower-monitor(1), powertop(1)
+.PP
+.SH AUTHORS
+.nf
+\-\-perf\-bias parts written by Len Brown <len.brown@intel.com>
+Thomas Renninger <trenn@suse.de>
diff --git a/tools/power/cpupower/man/cpupower.1 b/tools/power/cpupower/man/cpupower.1
new file mode 100644
index 000000000000..78c20feab85c
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower.1
@@ -0,0 +1,72 @@
+.TH CPUPOWER "1" "07/03/2011" "" "cpupower Manual"
+.SH NAME
+cpupower \- Shows and sets processor power related values
+.SH SYNOPSIS
+.ft B
+.B cpupower [ \-c cpulist ] subcommand [ARGS]
+
+.B cpupower \-v|\-\-version
+
+.B cpupower \-h|\-\-help
+
+.SH DESCRIPTION
+\fBcpupower \fP is a collection of tools to examine and tune power saving
+related features of your processor.
+
+The manpages of the subcommands (cpupower\-<subcommand>(1)) provide detailed
+descriptions of supported features. Run \fBcpupower help\fP to get an overview
+of supported subcommands.
+
+.SH Options
+.PP
+\-\-help, \-h
+.RS 4
+Shows supported subcommands and general usage.
+.RE
+.PP
+\-\-cpu cpulist,  \-c cpulist
+.RS 4
+Only show or set values for specific cores.
+This option is not supported by all subcommands, details can be found in the
+manpages of the subcommands.
+
+Some subcommands access all cores (typically the *\-set commands), some only
+the first core (typically the *\-info commands) by default.
+
+The syntax for <cpulist> is based on how the kernel exports CPU bitmasks via
+sysfs files. Some examples:
+.RS 4
+.TP 16
+Input
+Equivalent to
+.TP
+all
+all cores
+.TP
+0\-3
+0,1,2,3
+.TP
+0\-7:2
+0,2,4,6
+.TP
+1,3,5-7
+1,3,5,6,7
+.TP
+0\-3:2,8\-15:4
+0,2,8,12	
+.RE
+.RE
+.PP
+\-\-version,  \-v
+.RS 4
+Print the package name and version number.
+
+.SH "SEE ALSO"
+cpupower-set(1), cpupower-info(1), cpupower-idle(1),
+cpupower-frequency-set(1), cpupower-frequency-info(1), cpupower-monitor(1),
+powertop(1)
+.PP
+.SH AUTHORS
+.nf
+\-\-perf\-bias parts written by Len Brown <len.brown@intel.com>
+Thomas Renninger <trenn@suse.de>