diff options
Diffstat (limited to 'tools/testing/selftests')
19 files changed, 317 insertions, 6 deletions
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc index 231bcd2c4eb5..1e7ac6f3362f 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc @@ -71,8 +71,11 @@ test_badarg "\$stackp" "\$stack0+10" "\$stack1-10" echo "r ${PROBEFUNC} \$retval" > kprobe_events ! echo "p ${PROBEFUNC} \$retval" > kprobe_events +# $comm was introduced in 4.8, older kernels reject it. +if grep -A1 "fetcharg:" README | grep -q '\$comm' ; then : "Comm access" test_goodarg "\$comm" +fi : "Indirect memory access" test_goodarg "+0(${GOODREG})" "-0(${GOODREG})" "+10(\$stack)" \ diff --git a/tools/testing/selftests/kvm/config b/tools/testing/selftests/kvm/config new file mode 100644 index 000000000000..63ed533f73d6 --- /dev/null +++ b/tools/testing/selftests/kvm/config @@ -0,0 +1,3 @@ +CONFIG_KVM=y +CONFIG_KVM_INTEL=y +CONFIG_KVM_AMD=y diff --git a/tools/testing/selftests/net/reuseport_dualstack.c b/tools/testing/selftests/net/reuseport_dualstack.c index 90958aaaafb9..2737d6a595f4 100644 --- a/tools/testing/selftests/net/reuseport_dualstack.c +++ b/tools/testing/selftests/net/reuseport_dualstack.c @@ -128,7 +128,7 @@ static void test(int *rcv_fds, int count, int proto) { struct epoll_event ev; int epfd, i, test_fd; - uint16_t test_family; + int test_family; socklen_t len; epfd = epoll_create(1); @@ -145,6 +145,7 @@ static void test(int *rcv_fds, int count, int proto) send_from_v4(proto); test_fd = receive_once(epfd, proto); + len = sizeof(test_family); if (getsockopt(test_fd, SOL_SOCKET, SO_DOMAIN, &test_family, &len)) error(1, errno, "failed to read socket domain"); if (test_family != AF_INET) diff --git a/tools/testing/selftests/net/run_netsocktests b/tools/testing/selftests/net/run_netsocktests index 16058bbea7a8..c195b4478662 100755 --- a/tools/testing/selftests/net/run_netsocktests +++ b/tools/testing/selftests/net/run_netsocktests @@ -6,7 +6,7 @@ echo "--------------------" ./socket if [ $? -ne 0 ]; then echo "[FAIL]" + exit 1 else echo "[PASS]" fi - diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index c9ff2b47bd1c..a37cb1192c6a 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for netfilter selftests -TEST_PROGS := nft_trans_stress.sh nft_nat.sh +TEST_PROGS := nft_trans_stress.sh nft_nat.sh conntrack_icmp_related.sh include ../lib.mk diff --git a/tools/testing/selftests/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh new file mode 100755 index 000000000000..b48e1833bc89 --- /dev/null +++ b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh @@ -0,0 +1,283 @@ +#!/bin/bash +# +# check that ICMP df-needed/pkttoobig icmp are set are set as related +# state +# +# Setup is: +# +# nsclient1 -> nsrouter1 -> nsrouter2 -> nsclient2 +# MTU 1500, except for nsrouter2 <-> nsclient2 link (1280). +# ping nsclient2 from nsclient1, checking that conntrack did set RELATED +# 'fragmentation needed' icmp packet. +# +# In addition, nsrouter1 will perform IP masquerading, i.e. also +# check the icmp errors are propagated to the correct host as per +# nat of "established" icmp-echo "connection". + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +cleanup() { + for i in 1 2;do ip netns del nsclient$i;done + for i in 1 2;do ip netns del nsrouter$i;done +} + +ipv4() { + echo -n 192.168.$1.2 +} + +ipv6 () { + echo -n dead:$1::2 +} + +check_counter() +{ + ns=$1 + name=$2 + expect=$3 + local lret=0 + + cnt=$(ip netns exec $ns nft list counter inet filter "$name" | grep -q "$expect") + if [ $? -ne 0 ]; then + echo "ERROR: counter $name in $ns has unexpected value (expected $expect)" 1>&2 + ip netns exec $ns nft list counter inet filter "$name" 1>&2 + lret=1 + fi + + return $lret +} + +check_unknown() +{ + expect="packets 0 bytes 0" + for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do + check_counter $n "unknown" "$expect" + if [ $? -ne 0 ] ;then + return 1 + fi + done + + return 0 +} + +for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do + ip netns add $n + ip -net $n link set lo up +done + +DEV=veth0 +ip link add $DEV netns nsclient1 type veth peer name eth1 netns nsrouter1 +DEV=veth0 +ip link add $DEV netns nsclient2 type veth peer name eth1 netns nsrouter2 + +DEV=veth0 +ip link add $DEV netns nsrouter1 type veth peer name eth2 netns nsrouter2 + +DEV=veth0 +for i in 1 2; do + ip -net nsclient$i link set $DEV up + ip -net nsclient$i addr add $(ipv4 $i)/24 dev $DEV + ip -net nsclient$i addr add $(ipv6 $i)/64 dev $DEV +done + +ip -net nsrouter1 link set eth1 up +ip -net nsrouter1 link set veth0 up + +ip -net nsrouter2 link set eth1 up +ip -net nsrouter2 link set eth2 up + +ip -net nsclient1 route add default via 192.168.1.1 +ip -net nsclient1 -6 route add default via dead:1::1 + +ip -net nsclient2 route add default via 192.168.2.1 +ip -net nsclient2 route add default via dead:2::1 + +i=3 +ip -net nsrouter1 addr add 192.168.1.1/24 dev eth1 +ip -net nsrouter1 addr add 192.168.3.1/24 dev veth0 +ip -net nsrouter1 addr add dead:1::1/64 dev eth1 +ip -net nsrouter1 addr add dead:3::1/64 dev veth0 +ip -net nsrouter1 route add default via 192.168.3.10 +ip -net nsrouter1 -6 route add default via dead:3::10 + +ip -net nsrouter2 addr add 192.168.2.1/24 dev eth1 +ip -net nsrouter2 addr add 192.168.3.10/24 dev eth2 +ip -net nsrouter2 addr add dead:2::1/64 dev eth1 +ip -net nsrouter2 addr add dead:3::10/64 dev eth2 +ip -net nsrouter2 route add default via 192.168.3.1 +ip -net nsrouter2 route add default via dead:3::1 + +sleep 2 +for i in 4 6; do + ip netns exec nsrouter1 sysctl -q net.ipv$i.conf.all.forwarding=1 + ip netns exec nsrouter2 sysctl -q net.ipv$i.conf.all.forwarding=1 +done + +for netns in nsrouter1 nsrouter2; do +ip netns exec $netns nft -f - <<EOF +table inet filter { + counter unknown { } + counter related { } + chain forward { + type filter hook forward priority 0; policy accept; + meta l4proto icmpv6 icmpv6 type "packet-too-big" ct state "related" counter name "related" accept + meta l4proto icmp icmp type "destination-unreachable" ct state "related" counter name "related" accept + meta l4proto { icmp, icmpv6 } ct state new,established accept + counter name "unknown" drop + } +} +EOF +done + +ip netns exec nsclient1 nft -f - <<EOF +table inet filter { + counter unknown { } + counter related { } + chain input { + type filter hook input priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "related" counter name "related" accept + counter name "unknown" drop + } +} +EOF + +ip netns exec nsclient2 nft -f - <<EOF +table inet filter { + counter unknown { } + counter new { } + counter established { } + + chain input { + type filter hook input priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" accept + meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" accept + counter name "unknown" drop + } + chain output { + type filter hook output priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" + meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" + counter name "unknown" drop + } +} +EOF + + +# make sure NAT core rewrites adress of icmp error if nat is used according to +# conntrack nat information (icmp error will be directed at nsrouter1 address, +# but it needs to be routed to nsclient1 address). +ip netns exec nsrouter1 nft -f - <<EOF +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + ip protocol icmp oifname "veth0" counter masquerade + } +} +table ip6 nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + ip6 nexthdr icmpv6 oifname "veth0" counter masquerade + } +} +EOF + +ip netns exec nsrouter2 ip link set eth1 mtu 1280 +ip netns exec nsclient2 ip link set veth0 mtu 1280 +sleep 1 + +ip netns exec nsclient1 ping -c 1 -s 1000 -q -M do 192.168.2.2 >/dev/null +if [ $? -ne 0 ]; then + echo "ERROR: netns ip routing/connectivity broken" 1>&2 + cleanup + exit 1 +fi +ip netns exec nsclient1 ping6 -q -c 1 -s 1000 dead:2::2 >/dev/null +if [ $? -ne 0 ]; then + echo "ERROR: netns ipv6 routing/connectivity broken" 1>&2 + cleanup + exit 1 +fi + +check_unknown +if [ $? -ne 0 ]; then + ret=1 +fi + +expect="packets 0 bytes 0" +for netns in nsrouter1 nsrouter2 nsclient1;do + check_counter "$netns" "related" "$expect" + if [ $? -ne 0 ]; then + ret=1 + fi +done + +expect="packets 2 bytes 2076" +check_counter nsclient2 "new" "$expect" +if [ $? -ne 0 ]; then + ret=1 +fi + +ip netns exec nsclient1 ping -q -c 1 -s 1300 -M do 192.168.2.2 > /dev/null +if [ $? -eq 0 ]; then + echo "ERROR: ping should have failed with PMTU too big error" 1>&2 + ret=1 +fi + +# nsrouter2 should have generated the icmp error, so +# related counter should be 0 (its in forward). +expect="packets 0 bytes 0" +check_counter "nsrouter2" "related" "$expect" +if [ $? -ne 0 ]; then + ret=1 +fi + +# but nsrouter1 should have seen it, same for nsclient1. +expect="packets 1 bytes 576" +for netns in nsrouter1 nsclient1;do + check_counter "$netns" "related" "$expect" + if [ $? -ne 0 ]; then + ret=1 + fi +done + +ip netns exec nsclient1 ping6 -c 1 -s 1300 dead:2::2 > /dev/null +if [ $? -eq 0 ]; then + echo "ERROR: ping6 should have failed with PMTU too big error" 1>&2 + ret=1 +fi + +expect="packets 2 bytes 1856" +for netns in nsrouter1 nsclient1;do + check_counter "$netns" "related" "$expect" + if [ $? -ne 0 ]; then + ret=1 + fi +done + +if [ $ret -eq 0 ];then + echo "PASS: icmp mtu error had RELATED state" +else + echo "ERROR: icmp error RELATED state test has failed" +fi + +cleanup +exit $ret diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh index 8ec76681605c..f25f72a75cf3 100755 --- a/tools/testing/selftests/netfilter/nft_nat.sh +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -23,7 +23,11 @@ ip netns add ns0 ip netns add ns1 ip netns add ns2 -ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 +ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: No virtual ethernet pair device support in kernel" + exit $ksft_skip +fi ip link add veth1 netns ns0 type veth peer name eth0 netns ns2 ip -net ns0 link set lo up diff --git a/tools/testing/selftests/rseq/settings b/tools/testing/selftests/rseq/settings new file mode 100644 index 000000000000..e7b9417537fb --- /dev/null +++ b/tools/testing/selftests/rseq/settings @@ -0,0 +1 @@ +timeout=0 diff --git a/tools/testing/selftests/timers/adjtick.c b/tools/testing/selftests/timers/adjtick.c index 9887fd538fec..91316ab4b041 100644 --- a/tools/testing/selftests/timers/adjtick.c +++ b/tools/testing/selftests/timers/adjtick.c @@ -147,6 +147,7 @@ int check_tick_adj(long tickval) eppm = get_ppm_drift(); printf("%lld usec, %lld ppm", systick + (systick * eppm / MILLION), eppm); + fflush(stdout); tx1.modes = 0; adjtimex(&tx1); diff --git a/tools/testing/selftests/timers/leapcrash.c b/tools/testing/selftests/timers/leapcrash.c index a1071bdbdeb7..a77c70b47495 100644 --- a/tools/testing/selftests/timers/leapcrash.c +++ b/tools/testing/selftests/timers/leapcrash.c @@ -114,6 +114,7 @@ int main(void) } clear_time_state(); printf("."); + fflush(stdout); } printf("[OK]\n"); return ksft_exit_pass(); diff --git a/tools/testing/selftests/timers/mqueue-lat.c b/tools/testing/selftests/timers/mqueue-lat.c index a2a3924d0b41..efdb62470052 100644 --- a/tools/testing/selftests/timers/mqueue-lat.c +++ b/tools/testing/selftests/timers/mqueue-lat.c @@ -113,6 +113,7 @@ int main(int argc, char **argv) int ret; printf("Mqueue latency : "); + fflush(stdout); ret = mqueue_lat_test(); if (ret < 0) { diff --git a/tools/testing/selftests/timers/nanosleep.c b/tools/testing/selftests/timers/nanosleep.c index ff942ff7c9b3..2e6e94c02a33 100644 --- a/tools/testing/selftests/timers/nanosleep.c +++ b/tools/testing/selftests/timers/nanosleep.c @@ -153,6 +153,7 @@ int main(int argc, char **argv) continue; printf("Nanosleep %-31s ", clockstring(clockid)); + fflush(stdout); length = 10; while (length <= (NSEC_PER_SEC * 10)) { diff --git a/tools/testing/selftests/timers/nsleep-lat.c b/tools/testing/selftests/timers/nsleep-lat.c index 2d7898fda0f1..ac06cf10a5c2 100644 --- a/tools/testing/selftests/timers/nsleep-lat.c +++ b/tools/testing/selftests/timers/nsleep-lat.c @@ -166,6 +166,7 @@ int main(int argc, char **argv) continue; printf("nsleep latency %-26s ", clockstring(clockid)); + fflush(stdout); length = 10; while (length <= (NSEC_PER_SEC * 10)) { diff --git a/tools/testing/selftests/timers/raw_skew.c b/tools/testing/selftests/timers/raw_skew.c index 0ab937a17ebb..4e631da7f956 100644 --- a/tools/testing/selftests/timers/raw_skew.c +++ b/tools/testing/selftests/timers/raw_skew.c @@ -124,6 +124,7 @@ int main(int argv, char **argc) printf("WARNING: ADJ_OFFSET in progress, this will cause inaccurate results\n"); printf("Estimating clock drift: "); + fflush(stdout); sleep(120); get_monotonic_and_raw(&mon, &raw); diff --git a/tools/testing/selftests/timers/set-tai.c b/tools/testing/selftests/timers/set-tai.c index dc88dbc8831f..3ae76ab483de 100644 --- a/tools/testing/selftests/timers/set-tai.c +++ b/tools/testing/selftests/timers/set-tai.c @@ -66,6 +66,7 @@ int main(int argc, char **argv) printf("tai offset started at %i\n", ret); printf("Checking tai offsets can be properly set: "); + fflush(stdout); for (i = 1; i <= 60; i++) { ret = set_tai(i); ret = get_tai(); diff --git a/tools/testing/selftests/timers/set-tz.c b/tools/testing/selftests/timers/set-tz.c index f4184928b16b..b038131c9682 100644 --- a/tools/testing/selftests/timers/set-tz.c +++ b/tools/testing/selftests/timers/set-tz.c @@ -76,6 +76,7 @@ int main(int argc, char **argv) printf("tz_minuteswest started at %i, dst at %i\n", min, dst); printf("Checking tz_minuteswest can be properly set: "); + fflush(stdout); for (i = -15*60; i < 15*60; i += 30) { ret = set_tz(i, dst); ret = get_tz_min(); @@ -87,6 +88,7 @@ int main(int argc, char **argv) printf("[OK]\n"); printf("Checking invalid tz_minuteswest values are caught: "); + fflush(stdout); if (!set_tz(-15*60-1, dst)) { printf("[FAILED] %i didn't return failure!\n", -15*60-1); diff --git a/tools/testing/selftests/timers/threadtest.c b/tools/testing/selftests/timers/threadtest.c index e632e116f05e..a4bf736dd842 100644 --- a/tools/testing/selftests/timers/threadtest.c +++ b/tools/testing/selftests/timers/threadtest.c @@ -175,6 +175,7 @@ int main(int argc, char **argv) strftime(buf, 255, "%a, %d %b %Y %T %z", localtime(&start)); printf("%s\n", buf); printf("Testing consistency with %i threads for %ld seconds: ", thread_count, runtime); + fflush(stdout); /* spawn */ for (i = 0; i < thread_count; i++) diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c index 60fe3c569bd9..a747645d79f4 100644 --- a/tools/testing/selftests/timers/valid-adjtimex.c +++ b/tools/testing/selftests/timers/valid-adjtimex.c @@ -134,6 +134,7 @@ int validate_freq(void) /* Set the leap second insert flag */ printf("Testing ADJ_FREQ... "); + fflush(stdout); for (i = 0; i < NUM_FREQ_VALID; i++) { tx.modes = ADJ_FREQUENCY; tx.freq = valid_freq[i]; @@ -261,6 +262,7 @@ int set_bad_offset(long sec, long usec, int use_nano) int validate_set_offset(void) { printf("Testing ADJ_SETOFFSET... "); + fflush(stdout); /* Test valid values */ if (set_offset(NSEC_PER_SEC - 1, 1)) diff --git a/tools/testing/selftests/x86/ptrace_syscall.c b/tools/testing/selftests/x86/ptrace_syscall.c index 1e3da137a8bb..5390c827a359 100644 --- a/tools/testing/selftests/x86/ptrace_syscall.c +++ b/tools/testing/selftests/x86/ptrace_syscall.c @@ -413,8 +413,12 @@ int main() #if defined(__i386__) && (!defined(__GLIBC__) || __GLIBC__ > 2 || __GLIBC_MINOR__ >= 16) vsyscall32 = (void *)getauxval(AT_SYSINFO); - printf("[RUN]\tCheck AT_SYSINFO return regs\n"); - test_sys32_regs(do_full_vsyscall32); + if (vsyscall32) { + printf("[RUN]\tCheck AT_SYSINFO return regs\n"); + test_sys32_regs(do_full_vsyscall32); + } else { + printf("[SKIP]\tAT_SYSINFO is not available\n"); + } #endif test_ptrace_syscall_restart(); |