diff options
Diffstat (limited to 'tools')
| -rwxr-xr-x | tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh | 95 |
1 files changed, 71 insertions, 24 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh index 0150bb2741eb..117f6f35d72f 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh @@ -25,24 +25,24 @@ # Thus we set MTU to 10K on all involved interfaces. Then both unicast and # multicast traffic uses 8K frames. # -# +-----------------------+ +----------------------------------+ -# | H1 | | H2 | -# | | | unicast --> + $h2.111 | -# | | | traffic | 192.0.2.129/28 | -# | multicast | | | e-qos-map 0:1 | -# | traffic | | | | -# | $h1 + <----- | | + $h2 | -# +-----|-----------------+ +--------------|-------------------+ -# | | -# +-----|-------------------------------------------------|-------------------+ -# | + $swp1 + $swp2 | -# | | >1Gbps | >1Gbps | -# | +---|----------------+ +----------|----------------+ | -# | | + $swp1.1 | | + $swp2.111 | | +# +---------------------------+ +----------------------------------+ +# | H1 | | H2 | +# | | | unicast --> + $h2.111 | +# | multicast | | traffic | 192.0.2.129/28 | +# | traffic | | | e-qos-map 0:1 | +# | $h1 + <----- | | | | +# | 192.0.2.65/28 | | | + $h2 | +# +---------------|-----------+ +--------------|-------------------+ +# | | +# +---------------|---------------------------------------|-------------------+ +# | $swp1 + + $swp2 | +# | >1Gbps | | >1Gbps | +# | +-------------|------+ +----------|----------------+ | +# | | $swp1.1 + | | + $swp2.111 | | # | | BR1 | SW | BR111 | | -# | | + $swp3.1 | | + $swp3.111 | | -# | +---|----------------+ +----------|----------------+ | -# | \_________________________________________________/ | +# | | $swp3.1 + | | + $swp3.111 | | +# | +-------------|------+ +----------|----------------+ | +# | \_______________________________________/ | # | | | # | + $swp3 | # | | 1Gbps bottleneck | @@ -51,6 +51,7 @@ # | # +--|-----------------+ # | + $h3 H3 | +# | | 192.0.2.66/28 | # | | | # | + $h3.111 | # | 192.0.2.130/28 | @@ -59,6 +60,7 @@ ALL_TESTS=" ping_ipv4 test_mc_aware + test_uc_aware " lib_dir=$(dirname $0)/../../../net/forwarding @@ -68,14 +70,14 @@ source $lib_dir/lib.sh h1_create() { - simple_if_init $h1 + simple_if_init $h1 192.0.2.65/28 mtu_set $h1 10000 } h1_destroy() { mtu_restore $h1 - simple_if_fini $h1 + simple_if_fini $h1 192.0.2.65/28 } h2_create() @@ -97,7 +99,7 @@ h2_destroy() h3_create() { - simple_if_init $h3 + simple_if_init $h3 192.0.2.66/28 mtu_set $h3 10000 vlan_create $h3 111 v$h3 192.0.2.130/28 @@ -108,7 +110,7 @@ h3_destroy() vlan_destroy $h3 111 mtu_restore $h3 - simple_if_fini $h3 + simple_if_fini $h3 192.0.2.66/28 } switch_create() @@ -251,7 +253,7 @@ measure_uc_rate() # average ingress rate to somewhat mitigate this. local min_ingress=2147483648 - mausezahn $h2.111 -p 8000 -A 192.0.2.129 -B 192.0.2.130 -c 0 \ + $MZ $h2.111 -p 8000 -A 192.0.2.129 -B 192.0.2.130 -c 0 \ -a own -b $h3mac -t udp -q & sleep 1 @@ -291,7 +293,7 @@ test_mc_aware() check_err $? "Could not get high enough UC-only ingress rate" local ucth1=${uc_rate[1]} - mausezahn $h1 -p 8000 -c 0 -a own -b bc -t udp -q & + $MZ $h1 -p 8000 -c 0 -a own -b bc -t udp -q & local d0=$(date +%s) local t0=$(ethtool_stats_get $h3 rx_octets_prio_0) @@ -311,7 +313,7 @@ test_mc_aware() ret = 100 * ($ucth1 - $ucth2) / $ucth1 if (ret > 0) { ret } else { 0 } ") - check_err $(bc <<< "$deg > 10") + check_err $(bc <<< "$deg > 25") local interval=$((d1 - d0)) local mc_ir=$(rate $u0 $u1 $interval) @@ -335,6 +337,51 @@ test_mc_aware() echo " egress UC throughput $(humanize ${uc_rate_2[1]})" echo " ingress MC throughput $(humanize $mc_ir)" echo " egress MC throughput $(humanize $mc_er)" + echo +} + +test_uc_aware() +{ + RET=0 + + $MZ $h2.111 -p 8000 -A 192.0.2.129 -B 192.0.2.130 -c 0 \ + -a own -b $h3mac -t udp -q & + + local d0=$(date +%s) + local t0=$(ethtool_stats_get $h3 rx_octets_prio_1) + local u0=$(ethtool_stats_get $swp2 rx_octets_prio_1) + sleep 1 + + local attempts=50 + local passes=0 + local i + + for ((i = 0; i < attempts; ++i)); do + if $ARPING -c 1 -I $h1 -b 192.0.2.66 -q -w 0.1; then + ((passes++)) + fi + + sleep 0.1 + done + + local d1=$(date +%s) + local t1=$(ethtool_stats_get $h3 rx_octets_prio_1) + local u1=$(ethtool_stats_get $swp2 rx_octets_prio_1) + + local interval=$((d1 - d0)) + local uc_ir=$(rate $u0 $u1 $interval) + local uc_er=$(rate $t0 $t1 $interval) + + ((attempts == passes)) + check_err $? + + # Suppress noise from killing mausezahn. + { kill %% && wait; } 2>/dev/null + + log_test "MC performace under UC overload" + echo " ingress UC throughput $(humanize ${uc_ir})" + echo " egress UC throughput $(humanize ${uc_er})" + echo " sent $attempts BC ARPs, got $passes responses" } trap cleanup EXIT |