diff options
Diffstat (limited to 'tools')
| -rwxr-xr-x | tools/testing/ktest/ktest.pl | 581 | ||||
| -rw-r--r-- | tools/testing/ktest/sample.conf | 65 |
2 files changed, 297 insertions, 349 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 40631569a0fd..55ab700f6ba5 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -72,7 +72,7 @@ my %default = ( "IGNORE_UNUSED" => 0, ); -my $ktest_config; +my $ktest_config = "ktest.conf"; my $version; my $have_version = 0; my $machine; @@ -149,7 +149,6 @@ my $bisect_ret_abort; my $bisect_ret_default; my $in_patchcheck = 0; my $run_test; -my $redirect; my $buildlog; my $testlog; my $dmesg; @@ -522,7 +521,7 @@ sub read_ync { return read_prompt 1, $prompt; } -sub get_ktest_config { +sub get_mandatory_config { my ($config) = @_; my $ans; @@ -553,29 +552,29 @@ sub get_ktest_config { } } -sub get_ktest_configs { - get_ktest_config("MACHINE"); - get_ktest_config("BUILD_DIR"); - get_ktest_config("OUTPUT_DIR"); +sub get_mandatory_configs { + get_mandatory_config("MACHINE"); + get_mandatory_config("BUILD_DIR"); + get_mandatory_config("OUTPUT_DIR"); if ($newconfig) { - get_ktest_config("BUILD_OPTIONS"); + get_mandatory_config("BUILD_OPTIONS"); } # options required for other than just building a kernel if (!$buildonly) { - get_ktest_config("POWER_CYCLE"); - get_ktest_config("CONSOLE"); + get_mandatory_config("POWER_CYCLE"); + get_mandatory_config("CONSOLE"); } # options required for install and more if ($buildonly != 1) { - get_ktest_config("SSH_USER"); - get_ktest_config("BUILD_TARGET"); - get_ktest_config("TARGET_IMAGE"); + get_mandatory_config("SSH_USER"); + get_mandatory_config("BUILD_TARGET"); + get_mandatory_config("TARGET_IMAGE"); } - get_ktest_config("LOCALVERSION"); + get_mandatory_config("LOCALVERSION"); return if ($buildonly); @@ -583,7 +582,7 @@ sub get_ktest_configs { if (!defined($rtype)) { if (!defined($opt{"GRUB_MENU"})) { - get_ktest_config("REBOOT_TYPE"); + get_mandatory_config("REBOOT_TYPE"); $rtype = $entered_configs{"REBOOT_TYPE"}; } else { $rtype = "grub"; @@ -591,16 +590,16 @@ sub get_ktest_configs { } if ($rtype eq "grub") { - get_ktest_config("GRUB_MENU"); + get_mandatory_config("GRUB_MENU"); } if ($rtype eq "grub2") { - get_ktest_config("GRUB_MENU"); - get_ktest_config("GRUB_FILE"); + get_mandatory_config("GRUB_MENU"); + get_mandatory_config("GRUB_FILE"); } if ($rtype eq "syslinux") { - get_ktest_config("SYSLINUX_LABEL"); + get_mandatory_config("SYSLINUX_LABEL"); } } @@ -1090,7 +1089,7 @@ sub read_config { $test_case = __read_config $config, \$test_num; # make sure we have all mandatory configs - get_ktest_configs; + get_mandatory_configs; # was a test specified? if (!$test_case) { @@ -1529,7 +1528,7 @@ sub fail { } sub run_command { - my ($command) = @_; + my ($command, $redirect) = @_; my $dolog = 0; my $dord = 0; my $pid; @@ -2265,9 +2264,7 @@ sub build { # Run old config regardless, to enforce min configurations make_oldconfig; - $redirect = "$buildlog"; - my $build_ret = run_command "$make $build_options"; - undef $redirect; + my $build_ret = run_command "$make $build_options", $buildlog; if (defined($post_build)) { # Because a post build may change the kernel version @@ -2360,9 +2357,7 @@ sub child_run_test { $poweroff_on_error = 0; $die_on_failure = 1; - $redirect = "$testlog"; - run_command $run_test or $failed = 1; - undef $redirect; + run_command $run_test, $testlog or $failed = 1; exit $failed; } @@ -2789,12 +2784,17 @@ my %dependency; sub assign_configs { my ($hash, $config) = @_; + doprint "Reading configs from $config\n"; + open (IN, $config) or dodie "Failed to read $config"; while (<IN>) { + chomp; if (/^((CONFIG\S*)=.*)/) { ${$hash}{$2} = $1; + } elsif (/^(# (CONFIG\S*) is not set)/) { + ${$hash}{$2} = $1; } } @@ -2807,27 +2807,6 @@ sub process_config_ignore { assign_configs \%config_ignore, $config; } -sub read_current_config { - my ($config_ref) = @_; - - %{$config_ref} = (); - undef %{$config_ref}; - - my @key = keys %{$config_ref}; - if ($#key >= 0) { - print "did not delete!\n"; - exit; - } - open (IN, "$output_config"); - - while (<IN>) { - if (/^(CONFIG\S+)=(.*)/) { - ${$config_ref}{$1} = $2; - } - } - close(IN); -} - sub get_dependencies { my ($config) = @_; @@ -2846,53 +2825,97 @@ sub get_dependencies { return @deps; } +sub save_config { + my ($pc, $file) = @_; + + my %configs = %{$pc}; + + doprint "Saving configs into $file\n"; + + open(OUT, ">$file") or dodie "Can not write to $file"; + + foreach my $config (keys %configs) { + print OUT "$configs{$config}\n"; + } + close(OUT); +} + sub create_config { - my @configs = @_; + my ($name, $pc) = @_; - open(OUT, ">$output_config") or dodie "Can not write to $output_config"; + doprint "Creating old config from $name configs\n"; - foreach my $config (@configs) { - print OUT "$config_set{$config}\n"; - my @deps = get_dependencies $config; - foreach my $dep (@deps) { - print OUT "$config_set{$dep}\n"; + save_config $pc, $output_config; + + make_oldconfig; +} + +# compare two config hashes, and return configs with different vals. +# It returns B's config values, but you can use A to see what A was. +sub diff_config_vals { + my ($pa, $pb) = @_; + + # crappy Perl way to pass in hashes. + my %a = %{$pa}; + my %b = %{$pb}; + + my %ret; + + foreach my $item (keys %a) { + if (defined($b{$item}) && $b{$item} ne $a{$item}) { + $ret{$item} = $b{$item}; } } - # turn off configs to keep off - foreach my $config (keys %config_off) { - print OUT "# $config is not set\n"; - } + return %ret; +} - # turn off configs that should be off for now - foreach my $config (@config_off_tmp) { - print OUT "# $config is not set\n"; - } +# compare two config hashes and return the configs in B but not A +sub diff_configs { + my ($pa, $pb) = @_; + + my %ret; + + # crappy Perl way to pass in hashes. + my %a = %{$pa}; + my %b = %{$pb}; - foreach my $config (keys %config_ignore) { - print OUT "$config_ignore{$config}\n"; + foreach my $item (keys %b) { + if (!defined($a{$item})) { + $ret{$item} = $b{$item}; + } } - close(OUT); - make_oldconfig; + return %ret; } +# return if two configs are equal or not +# 0 is equal +1 b has something a does not +# +1 if a and b have a different item. +# -1 if a has something b does not sub compare_configs { - my (%a, %b) = @_; + my ($pa, $pb) = @_; - foreach my $item (keys %a) { - if (!defined($b{$item})) { - print "diff $item\n"; + my %ret; + + # crappy Perl way to pass in hashes. + my %a = %{$pa}; + my %b = %{$pb}; + + foreach my $item (keys %b) { + if (!defined($a{$item})) { + return 1; + } + if ($a{$item} ne $b{$item}) { return 1; } - delete $b{$item}; } - my @keys = keys %b; - if ($#keys) { - print "diff2 $keys[0]\n"; + foreach my $item (keys %a) { + if (!defined($b{$item})) { + return -1; + } } - return -1 if ($#keys >= 0); return 0; } @@ -2900,24 +2923,13 @@ sub compare_configs { sub run_config_bisect_test { my ($type) = @_; - return run_bisect_test $type, "oldconfig"; -} + my $ret = run_bisect_test $type, "oldconfig"; -sub process_passed { - my (%configs) = @_; - - doprint "These configs had no failure: (Enabling them for further compiles)\n"; - # Passed! All these configs are part of a good compile. - # Add them to the min options. - foreach my $config (keys %configs) { - if (defined($config_list{$config})) { - doprint " removing $config\n"; - $config_ignore{$config} = $config_list{$config}; - delete $config_list{$config}; - } + if ($bisect_manual) { + $ret = answer_bisect; } - doprint "config copied to $outputdir/config_good\n"; - run_command "cp -f $output_config $outputdir/config_good"; + + return $ret; } sub process_failed { @@ -2928,253 +2940,225 @@ sub process_failed { doprint "***************************************\n\n"; } -sub run_config_bisect { +# used for config bisecting +my $good_config; +my $bad_config; - my @start_list = keys %config_list; +sub process_new_config { + my ($tc, $nc, $gc, $bc) = @_; - if ($#start_list < 0) { - doprint "No more configs to test!!!\n"; - return -1; + my %tmp_config = %{$tc}; + my %good_configs = %{$gc}; + my %bad_configs = %{$bc}; + + my %new_configs; + + my $runtest = 1; + my $ret; + + create_config "tmp_configs", \%tmp_config; + assign_configs \%new_configs, $output_config; + + $ret = compare_configs \%new_configs, \%bad_configs; + if (!$ret) { + doprint "New config equals bad config, try next test\n"; + $runtest = 0; + } + + if ($runtest) { + $ret = compare_configs \%new_configs, \%good_configs; + if (!$ret) { + doprint "New config equals good config, try next test\n"; + $runtest = 0; + } } - doprint "***** RUN TEST ***\n"; + %{$nc} = %new_configs; + + return $runtest; +} + +sub run_config_bisect { + my ($pgood, $pbad) = @_; + my $type = $config_bisect_type; + + my %good_configs = %{$pgood}; + my %bad_configs = %{$pbad}; + + my %diff_configs = diff_config_vals \%good_configs, \%bad_configs; + my %b_configs = diff_configs \%good_configs, \%bad_configs; + my %g_configs = diff_configs \%bad_configs, \%good_configs; + + my @diff_arr = keys %diff_configs; + my $len_diff = $#diff_arr + 1; + + my @b_arr = keys %b_configs; + my $len_b = $#b_arr + 1; + + my @g_arr = keys %g_configs; + my $len_g = $#g_arr + 1; + + my $runtest = 1; + my %new_configs; my $ret; - my %current_config; - my $count = $#start_list + 1; - doprint " $count configs to test\n"; + # First, lets get it down to a single subset. + # Is the problem with a difference in values? + # Is the problem with a missing config? + # Is the problem with a config that breaks things? - my $half = int($#start_list / 2); + # Enable all of one set and see if we get a new bad + # or good config. - do { - my @tophalf = @start_list[0 .. $half]; + # first set the good config to the bad values. - # keep the bottom half off - if ($half < $#start_list) { - @config_off_tmp = @start_list[$half + 1 .. $#start_list]; - } else { - @config_off_tmp = (); - } + doprint "d=$len_diff g=$len_g b=$len_b\n"; - create_config @tophalf; - read_current_config \%current_config; - - $count = $#tophalf + 1; - doprint "Testing $count configs\n"; - my $found = 0; - # make sure we test something - foreach my $config (@tophalf) { - if (defined($current_config{$config})) { - logit " $config\n"; - $found = 1; - } - } - if (!$found) { - # try the other half - doprint "Top half produced no set configs, trying bottom half\n"; - - # keep the top half off - @config_off_tmp = @tophalf; - @tophalf = @start_list[$half + 1 .. $#start_list]; - - create_config @tophalf; - read_current_config \%current_config; - foreach my $config (@tophalf) { - if (defined($current_config{$config})) { - logit " $config\n"; - $found = 1; - } - } - if (!$found) { - doprint "Failed: Can't make new config with current configs\n"; - foreach my $config (@start_list) { - doprint " CONFIG: $config\n"; - } - return -1; + # first lets enable things in bad config that are enabled in good config + + if ($len_diff > 0) { + if ($len_b > 0 || $len_g > 0) { + my %tmp_config = %bad_configs; + + doprint "Set tmp config to be bad config with good config values\n"; + foreach my $item (@diff_arr) { + $tmp_config{$item} = $good_configs{$item}; } - $count = $#tophalf + 1; - doprint "Testing $count configs\n"; - } - $ret = run_config_bisect_test $type; - if ($bisect_manual) { - $ret = answer_bisect; - } - if ($ret) { - process_passed %current_config; - return 0; + $runtest = process_new_config \%tmp_config, \%new_configs, + \%good_configs, \%bad_configs; } + } - doprint "This config had a failure.\n"; - doprint "Removing these configs that were not set in this config:\n"; - doprint "config copied to $outputdir/config_bad\n"; - run_command "cp -f $output_config $outputdir/config_bad"; + if (!$runtest && $len_diff > 0) { - # A config exists in this group that was bad. - foreach my $config (keys %config_list) { - if (!defined($current_config{$config})) { - doprint " removing $config\n"; - delete $config_list{$config}; - } + if ($len_diff == 1) { + process_failed $diff_arr[0]; + return 1; } + my %tmp_config = %bad_configs; - @start_list = @tophalf; + my $half = int($#diff_arr / 2); + my @tophalf = @diff_arr[0 .. $half]; - if ($#start_list == 0) { - process_failed $start_list[0]; - return 1; + doprint "Settings bisect with top half:\n"; + doprint "Set tmp config to be bad config with some good config values\n"; + foreach my $item (@tophalf) { + $tmp_config{$item} = $good_configs{$item}; } - # remove half the configs we are looking at and see if - # they are good. - $half = int($#start_list / 2); - } while ($#start_list > 0); + $runtest = process_new_config \%tmp_config, \%new_configs, + \%good_configs, \%bad_configs; - # we found a single config, try it again unless we are running manually + if (!$runtest) { + my %tmp_config = %bad_configs; - if ($bisect_manual) { - process_failed $start_list[0]; - return 1; - } + doprint "Try bottom half\n"; - my @tophalf = @start_list[0 .. 0]; + my @bottomhalf = @diff_arr[$half+1 .. $#diff_arr]; - $ret = run_config_bisect_test $type; - if ($ret) { - process_passed %current_config; + foreach my $item (@bottomhalf) { + $tmp_config{$item} = $good_configs{$item}; + } + + $runtest = process_new_config \%tmp_config, \%new_configs, + \%good_configs, \%bad_configs; + } + } + + if ($runtest) { + $ret = run_config_bisect_test $type; + if ($ret) { + doprint "NEW GOOD CONFIG\n"; + %good_configs = %new_configs; + run_command "mv $good_config ${good_config}.last"; + save_config \%good_configs, $good_config; + %{$pgood} = %good_configs; + } else { + doprint "NEW BAD CONFIG\n"; + %bad_configs = %new_configs; + run_command "mv $bad_config ${bad_config}.last"; + save_config \%bad_configs, $bad_config; + %{$pbad} = %bad_configs; + } return 0; } - process_failed $start_list[0]; - return 1; + fail "Hmm, need to do a mix match?\n"; + return -1; } sub config_bisect { my ($i) = @_; - my $start_config = $config_bisect; + my $type = $config_bisect_type; + my $ret; - my $tmpconfig = "$tmpdir/use_config"; + $bad_config = $config_bisect; if (defined($config_bisect_good)) { - process_config_ignore $config_bisect_good; - } - - # Make the file with the bad config and the min config - if (defined($minconfig)) { - # read the min config for things to ignore - run_command "cp $minconfig $tmpconfig" or - dodie "failed to copy $minconfig to $tmpconfig"; + $good_config = $config_bisect_good; + } elsif (defined($minconfig)) { + $good_config = $minconfig; } else { - unlink $tmpconfig; - } - - if (-f $tmpconfig) { - load_force_config($tmpconfig); - process_config_ignore $tmpconfig; - } - - # now process the start config - run_command "cp $start_config $output_config" or - dodie "failed to copy $start_config to $output_config"; - - # read directly what we want to check - my %config_check; - open (IN, $output_config) - or dodie "failed to open $output_config"; - - while (<IN>) { - if (/^((CONFIG\S*)=.*)/) { - $config_check{$2} = $1; + doprint "No config specified, checking if defconfig works"; + $ret = run_bisect_test $type, "defconfig"; + if (!$ret) { + fail "Have no good config to compare with, please set CONFIG_BISECT_GOOD"; + return 1; } + $good_config = $output_config; } - close(IN); - # Now run oldconfig with the minconfig - make_oldconfig; + # we don't want min configs to cause issues here. + doprint "Disabling 'MIN_CONFIG' for this test\n"; + undef $minconfig; - # check to see what we lost (or gained) - open (IN, $output_config) - or dodie "Failed to read $start_config"; + my %good_configs; + my %bad_configs; + my %tmp_configs; - my %removed_configs; - my %added_configs; + doprint "Run good configs through make oldconfig\n"; + assign_configs \%tmp_configs, $good_config; + create_config "$good_config", \%tmp_configs; + assign_configs \%good_configs, $output_config; - while (<IN>) { - if (/^((CONFIG\S*)=.*)/) { - # save off all options - $config_set{$2} = $1; - if (defined($config_check{$2})) { - if (defined($config_ignore{$2})) { - $removed_configs{$2} = $1; - } else { - $config_list{$2} = $1; - } - } elsif (!defined($config_ignore{$2})) { - $added_configs{$2} = $1; - $config_list{$2} = $1; - } - } elsif (/^# ((CONFIG\S*).*)/) { - # Keep these configs disabled - $config_set{$2} = $1; - $config_off{$2} = $1; - } - } - close(IN); + doprint "Run bad configs through make oldconfig\n"; + assign_configs \%tmp_configs, $bad_config; + create_config "$bad_config", \%tmp_configs; + assign_configs \%bad_configs, $output_config; - my @confs = keys %removed_configs; - if ($#confs >= 0) { - doprint "Configs overridden by default configs and removed from check:\n"; - foreach my $config (@confs) { - doprint " $config\n"; - } - } - @confs = keys %added_configs; - if ($#confs >= 0) { - doprint "Configs appearing in make oldconfig and added:\n"; - foreach my $config (@confs) { - doprint " $config\n"; - } - } + $good_config = "$tmpdir/good_config"; + $bad_config = "$tmpdir/bad_config"; + + save_config \%good_configs, $good_config; + save_config \%bad_configs, $bad_config; - my %config_test; - my $once = 0; - @config_off_tmp = (); + if (defined($config_bisect_check) && $config_bisect_check ne "0") { + if ($config_bisect_check ne "good") { + doprint "Testing bad config\n"; - # Sometimes kconfig does weird things. We must make sure - # that the config we autocreate has everything we need - # to test, otherwise we may miss testing configs, or - # may not be able to create a new config. - # Here we create a config with everything set. - create_config (keys %config_list); - read_current_config \%config_test; - foreach my $config (keys %config_list) { - if (!defined($config_test{$config})) { - if (!$once) { - $once = 1; - doprint "Configs not produced by kconfig (will not be checked):\n"; + $ret = run_bisect_test $type, "useconfig:$bad_config"; + if ($ret) { + fail "Bad config succeeded when expected to fail!"; + return 0; } - doprint " $config\n"; - delete $config_list{$config}; } - } - my $ret; + if ($config_bisect_check ne "bad") { + doprint "Testing good config\n"; - if (defined($config_bisect_check) && $config_bisect_check) { - doprint " Checking to make sure bad config with min config fails\n"; - create_config keys %config_list; - $ret = run_config_bisect_test $config_bisect_type; - if ($ret) { - doprint " FAILED! Bad config with min config boots fine\n"; - return -1; + $ret = run_bisect_test $type, "useconfig:$good_config"; + if (!$ret) { + fail "Good config failed when expected to succeed!"; + return 0; + } } - doprint " Bad config with min config fails as expected\n"; } do { - $ret = run_config_bisect; + $ret = run_config_bisect \%good_configs, \%bad_configs; } while (!$ret); return $ret if ($ret < 0); @@ -3455,29 +3439,6 @@ sub read_depends { read_kconfig($kconfig); } -sub read_config_list { - my ($config) = @_; - - open (IN, $config) - or dodie "Failed to read $config"; - - while (<IN>) { - if (/^((CONFIG\S*)=.*)/) { - if (!defined($config_ignore{$2})) { - $config_list{$2} = $1; - } - } - } - - close(IN); -} - -sub read_output_config { - my ($config) = @_; - - assign_configs \%config_ignore, $config; -} - sub make_new_config { my @configs = @_; @@ -3863,7 +3824,7 @@ sub make_warnings_file { success $i; } -$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl config-file\n"; +$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl [config-file]\n"; if ($#ARGV == 0) { $ktest_config = $ARGV[0]; @@ -3873,8 +3834,6 @@ if ($#ARGV == 0) { exit 0; } } -} else { - $ktest_config = "ktest.conf"; } if (! -f $ktest_config) { diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 172eec4517fb..911e45ad657a 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -1098,49 +1098,35 @@ # # The way it works is this: # -# First it finds a config to work with. Since a different version, or -# MIN_CONFIG may cause different dependecies, it must run through this -# preparation. +# You can specify a good config with CONFIG_BISECT_GOOD, otherwise it +# will use the MIN_CONFIG, and if that's not specified, it will use +# the config that comes with "make defconfig". # -# Overwrites any config set in the bad config with a config set in -# either the MIN_CONFIG or ADD_CONFIG. Thus, make sure these configs -# are minimal and do not disable configs you want to test: -# (ie. # CONFIG_FOO is not set). +# It runs both the good and bad configs through a make oldconfig to +# make sure that they are set up for the kernel that is checked out. # -# An oldconfig is run on the bad config and any new config that -# appears will be added to the configs to test. +# It then reads the configs that are set, as well as the ones that are +# not set for both the good and bad configs, and then compares them. +# It will set half of the good configs within the bad config (note, +# "set" means to make the bad config match the good config, a config +# in the good config that is off, will be turned off in the bad +# config. That is considered a "set"). # -# Finally, it generates a config with the above result and runs it -# again through make oldconfig to produce a config that should be -# satisfied by kconfig. +# It tests this new config and if it works, it becomes the new good +# config, otherwise it becomes the new bad config. It continues this +# process until there's only one config left and it will report that +# config. # -# Then it starts the bisect. +# The "bad config" can also be a config that is needed to boot but was +# disabled because it depended on something that wasn't set. # -# The configs to test are cut in half. If all the configs in this -# half depend on a config in the other half, then the other half -# is tested instead. If no configs are enabled by either half, then -# this means a circular dependency exists and the test fails. +# During this process, it saves the current good and bad configs in +# ${TMP_DIR}/good_config and ${TMP_DIR}/bad_config respectively. +# If you stop the test, you can copy them to a new location to +# reuse them again. # -# A config is created with the test half, and the bisect test is run. -# -# If the bisect succeeds, then all configs in the generated config -# are removed from the configs to test and added to the configs that -# will be enabled for all builds (they will be enabled, but not be part -# of the configs to examine). -# -# If the bisect fails, then all test configs that were not enabled by -# the config file are removed from the test. These configs will not -# be enabled in future tests. Since current config failed, we consider -# this to be a subset of the config that we started with. -# -# When we are down to one config, it is considered the bad config. -# -# Note, the config chosen may not be the true bad config. Due to -# dependencies and selections of the kbuild system, mulitple -# configs may be needed to cause a failure. If you disable the -# config that was found and restart the test, if the test fails -# again, it is recommended to rerun the config_bisect with a new -# bad config without the found config enabled. +# Although the MIN_CONFIG may be the config it starts with, the +# MIN_CONFIG is ignored. # # The option BUILD_TYPE will be ignored. # @@ -1160,13 +1146,16 @@ # CONFIG_BISECT_GOOD (optional) # If you have a good config to start with, then you # can specify it with CONFIG_BISECT_GOOD. Otherwise -# the MIN_CONFIG is the base. +# the MIN_CONFIG is the base, if MIN_CONFIG is not set +# It will build a config with "make defconfig" # # CONFIG_BISECT_CHECK (optional) # Set this to 1 if you want to confirm that the config ktest # generates (the bad config with the min config) is still bad. # It may be that the min config fixes what broke the bad config # and the test will not return a result. +# Set it to "good" to test only the good config and set it +# to "bad" to only test the bad config. # # Example: # TEST_START |