summaryrefslogtreecommitdiff
path: root/tools
diff options
context:
space:
mode:
Diffstat (limited to 'tools')
-rwxr-xr-xtools/testing/ktest/ktest.pl581
-rw-r--r--tools/testing/ktest/sample.conf65
-rwxr-xr-xtools/testing/selftests/rcutorture/bin/kvm-recheck.sh8
-rwxr-xr-xtools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh9
-rw-r--r--tools/testing/selftests/rcutorture/bin/kvm.sh21
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/TREE011
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/TREE021
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/TREE02-T1
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/TREE031
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/TREE041
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/TREE051
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/TREE061
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/TREE071
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/TREE081
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/TREE08-T1
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/TREE091
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp1
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp1
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp1
-rw-r--r--tools/testing/selftests/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp1
-rw-r--r--tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt1
21 files changed, 323 insertions, 377 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 40631569a0fd..55ab700f6ba5 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -72,7 +72,7 @@ my %default = (
"IGNORE_UNUSED" => 0,
);
-my $ktest_config;
+my $ktest_config = "ktest.conf";
my $version;
my $have_version = 0;
my $machine;
@@ -149,7 +149,6 @@ my $bisect_ret_abort;
my $bisect_ret_default;
my $in_patchcheck = 0;
my $run_test;
-my $redirect;
my $buildlog;
my $testlog;
my $dmesg;
@@ -522,7 +521,7 @@ sub read_ync {
return read_prompt 1, $prompt;
}
-sub get_ktest_config {
+sub get_mandatory_config {
my ($config) = @_;
my $ans;
@@ -553,29 +552,29 @@ sub get_ktest_config {
}
}
-sub get_ktest_configs {
- get_ktest_config("MACHINE");
- get_ktest_config("BUILD_DIR");
- get_ktest_config("OUTPUT_DIR");
+sub get_mandatory_configs {
+ get_mandatory_config("MACHINE");
+ get_mandatory_config("BUILD_DIR");
+ get_mandatory_config("OUTPUT_DIR");
if ($newconfig) {
- get_ktest_config("BUILD_OPTIONS");
+ get_mandatory_config("BUILD_OPTIONS");
}
# options required for other than just building a kernel
if (!$buildonly) {
- get_ktest_config("POWER_CYCLE");
- get_ktest_config("CONSOLE");
+ get_mandatory_config("POWER_CYCLE");
+ get_mandatory_config("CONSOLE");
}
# options required for install and more
if ($buildonly != 1) {
- get_ktest_config("SSH_USER");
- get_ktest_config("BUILD_TARGET");
- get_ktest_config("TARGET_IMAGE");
+ get_mandatory_config("SSH_USER");
+ get_mandatory_config("BUILD_TARGET");
+ get_mandatory_config("TARGET_IMAGE");
}
- get_ktest_config("LOCALVERSION");
+ get_mandatory_config("LOCALVERSION");
return if ($buildonly);
@@ -583,7 +582,7 @@ sub get_ktest_configs {
if (!defined($rtype)) {
if (!defined($opt{"GRUB_MENU"})) {
- get_ktest_config("REBOOT_TYPE");
+ get_mandatory_config("REBOOT_TYPE");
$rtype = $entered_configs{"REBOOT_TYPE"};
} else {
$rtype = "grub";
@@ -591,16 +590,16 @@ sub get_ktest_configs {
}
if ($rtype eq "grub") {
- get_ktest_config("GRUB_MENU");
+ get_mandatory_config("GRUB_MENU");
}
if ($rtype eq "grub2") {
- get_ktest_config("GRUB_MENU");
- get_ktest_config("GRUB_FILE");
+ get_mandatory_config("GRUB_MENU");
+ get_mandatory_config("GRUB_FILE");
}
if ($rtype eq "syslinux") {
- get_ktest_config("SYSLINUX_LABEL");
+ get_mandatory_config("SYSLINUX_LABEL");
}
}
@@ -1090,7 +1089,7 @@ sub read_config {
$test_case = __read_config $config, \$test_num;
# make sure we have all mandatory configs
- get_ktest_configs;
+ get_mandatory_configs;
# was a test specified?
if (!$test_case) {
@@ -1529,7 +1528,7 @@ sub fail {
}
sub run_command {
- my ($command) = @_;
+ my ($command, $redirect) = @_;
my $dolog = 0;
my $dord = 0;
my $pid;
@@ -2265,9 +2264,7 @@ sub build {
# Run old config regardless, to enforce min configurations
make_oldconfig;
- $redirect = "$buildlog";
- my $build_ret = run_command "$make $build_options";
- undef $redirect;
+ my $build_ret = run_command "$make $build_options", $buildlog;
if (defined($post_build)) {
# Because a post build may change the kernel version
@@ -2360,9 +2357,7 @@ sub child_run_test {
$poweroff_on_error = 0;
$die_on_failure = 1;
- $redirect = "$testlog";
- run_command $run_test or $failed = 1;
- undef $redirect;
+ run_command $run_test, $testlog or $failed = 1;
exit $failed;
}
@@ -2789,12 +2784,17 @@ my %dependency;
sub assign_configs {
my ($hash, $config) = @_;
+ doprint "Reading configs from $config\n";
+
open (IN, $config)
or dodie "Failed to read $config";
while (<IN>) {
+ chomp;
if (/^((CONFIG\S*)=.*)/) {
${$hash}{$2} = $1;
+ } elsif (/^(# (CONFIG\S*) is not set)/) {
+ ${$hash}{$2} = $1;
}
}
@@ -2807,27 +2807,6 @@ sub process_config_ignore {
assign_configs \%config_ignore, $config;
}
-sub read_current_config {
- my ($config_ref) = @_;
-
- %{$config_ref} = ();
- undef %{$config_ref};
-
- my @key = keys %{$config_ref};
- if ($#key >= 0) {
- print "did not delete!\n";
- exit;
- }
- open (IN, "$output_config");
-
- while (<IN>) {
- if (/^(CONFIG\S+)=(.*)/) {
- ${$config_ref}{$1} = $2;
- }
- }
- close(IN);
-}
-
sub get_dependencies {
my ($config) = @_;
@@ -2846,53 +2825,97 @@ sub get_dependencies {
return @deps;
}
+sub save_config {
+ my ($pc, $file) = @_;
+
+ my %configs = %{$pc};
+
+ doprint "Saving configs into $file\n";
+
+ open(OUT, ">$file") or dodie "Can not write to $file";
+
+ foreach my $config (keys %configs) {
+ print OUT "$configs{$config}\n";
+ }
+ close(OUT);
+}
+
sub create_config {
- my @configs = @_;
+ my ($name, $pc) = @_;
- open(OUT, ">$output_config") or dodie "Can not write to $output_config";
+ doprint "Creating old config from $name configs\n";
- foreach my $config (@configs) {
- print OUT "$config_set{$config}\n";
- my @deps = get_dependencies $config;
- foreach my $dep (@deps) {
- print OUT "$config_set{$dep}\n";
+ save_config $pc, $output_config;
+
+ make_oldconfig;
+}
+
+# compare two config hashes, and return configs with different vals.
+# It returns B's config values, but you can use A to see what A was.
+sub diff_config_vals {
+ my ($pa, $pb) = @_;
+
+ # crappy Perl way to pass in hashes.
+ my %a = %{$pa};
+ my %b = %{$pb};
+
+ my %ret;
+
+ foreach my $item (keys %a) {
+ if (defined($b{$item}) && $b{$item} ne $a{$item}) {
+ $ret{$item} = $b{$item};
}
}
- # turn off configs to keep off
- foreach my $config (keys %config_off) {
- print OUT "# $config is not set\n";
- }
+ return %ret;
+}
- # turn off configs that should be off for now
- foreach my $config (@config_off_tmp) {
- print OUT "# $config is not set\n";
- }
+# compare two config hashes and return the configs in B but not A
+sub diff_configs {
+ my ($pa, $pb) = @_;
+
+ my %ret;
+
+ # crappy Perl way to pass in hashes.
+ my %a = %{$pa};
+ my %b = %{$pb};
- foreach my $config (keys %config_ignore) {
- print OUT "$config_ignore{$config}\n";
+ foreach my $item (keys %b) {
+ if (!defined($a{$item})) {
+ $ret{$item} = $b{$item};
+ }
}
- close(OUT);
- make_oldconfig;
+ return %ret;
}
+# return if two configs are equal or not
+# 0 is equal +1 b has something a does not
+# +1 if a and b have a different item.
+# -1 if a has something b does not
sub compare_configs {
- my (%a, %b) = @_;
+ my ($pa, $pb) = @_;
- foreach my $item (keys %a) {
- if (!defined($b{$item})) {
- print "diff $item\n";
+ my %ret;
+
+ # crappy Perl way to pass in hashes.
+ my %a = %{$pa};
+ my %b = %{$pb};
+
+ foreach my $item (keys %b) {
+ if (!defined($a{$item})) {
+ return 1;
+ }
+ if ($a{$item} ne $b{$item}) {
return 1;
}
- delete $b{$item};
}
- my @keys = keys %b;
- if ($#keys) {
- print "diff2 $keys[0]\n";
+ foreach my $item (keys %a) {
+ if (!defined($b{$item})) {
+ return -1;
+ }
}
- return -1 if ($#keys >= 0);
return 0;
}
@@ -2900,24 +2923,13 @@ sub compare_configs {
sub run_config_bisect_test {
my ($type) = @_;
- return run_bisect_test $type, "oldconfig";
-}
+ my $ret = run_bisect_test $type, "oldconfig";
-sub process_passed {
- my (%configs) = @_;
-
- doprint "These configs had no failure: (Enabling them for further compiles)\n";
- # Passed! All these configs are part of a good compile.
- # Add them to the min options.
- foreach my $config (keys %configs) {
- if (defined($config_list{$config})) {
- doprint " removing $config\n";
- $config_ignore{$config} = $config_list{$config};
- delete $config_list{$config};
- }
+ if ($bisect_manual) {
+ $ret = answer_bisect;
}
- doprint "config copied to $outputdir/config_good\n";
- run_command "cp -f $output_config $outputdir/config_good";
+
+ return $ret;
}
sub process_failed {
@@ -2928,253 +2940,225 @@ sub process_failed {
doprint "***************************************\n\n";
}
-sub run_config_bisect {
+# used for config bisecting
+my $good_config;
+my $bad_config;
- my @start_list = keys %config_list;
+sub process_new_config {
+ my ($tc, $nc, $gc, $bc) = @_;
- if ($#start_list < 0) {
- doprint "No more configs to test!!!\n";
- return -1;
+ my %tmp_config = %{$tc};
+ my %good_configs = %{$gc};
+ my %bad_configs = %{$bc};
+
+ my %new_configs;
+
+ my $runtest = 1;
+ my $ret;
+
+ create_config "tmp_configs", \%tmp_config;
+ assign_configs \%new_configs, $output_config;
+
+ $ret = compare_configs \%new_configs, \%bad_configs;
+ if (!$ret) {
+ doprint "New config equals bad config, try next test\n";
+ $runtest = 0;
+ }
+
+ if ($runtest) {
+ $ret = compare_configs \%new_configs, \%good_configs;
+ if (!$ret) {
+ doprint "New config equals good config, try next test\n";
+ $runtest = 0;
+ }
}
- doprint "***** RUN TEST ***\n";
+ %{$nc} = %new_configs;
+
+ return $runtest;
+}
+
+sub run_config_bisect {
+ my ($pgood, $pbad) = @_;
+
my $type = $config_bisect_type;
+
+ my %good_configs = %{$pgood};
+ my %bad_configs = %{$pbad};
+
+ my %diff_configs = diff_config_vals \%good_configs, \%bad_configs;
+ my %b_configs = diff_configs \%good_configs, \%bad_configs;
+ my %g_configs = diff_configs \%bad_configs, \%good_configs;
+
+ my @diff_arr = keys %diff_configs;
+ my $len_diff = $#diff_arr + 1;
+
+ my @b_arr = keys %b_configs;
+ my $len_b = $#b_arr + 1;
+
+ my @g_arr = keys %g_configs;
+ my $len_g = $#g_arr + 1;
+
+ my $runtest = 1;
+ my %new_configs;
my $ret;
- my %current_config;
- my $count = $#start_list + 1;
- doprint " $count configs to test\n";
+ # First, lets get it down to a single subset.
+ # Is the problem with a difference in values?
+ # Is the problem with a missing config?
+ # Is the problem with a config that breaks things?
- my $half = int($#start_list / 2);
+ # Enable all of one set and see if we get a new bad
+ # or good config.
- do {
- my @tophalf = @start_list[0 .. $half];
+ # first set the good config to the bad values.
- # keep the bottom half off
- if ($half < $#start_list) {
- @config_off_tmp = @start_list[$half + 1 .. $#start_list];
- } else {
- @config_off_tmp = ();
- }
+ doprint "d=$len_diff g=$len_g b=$len_b\n";
- create_config @tophalf;
- read_current_config \%current_config;
-
- $count = $#tophalf + 1;
- doprint "Testing $count configs\n";
- my $found = 0;
- # make sure we test something
- foreach my $config (@tophalf) {
- if (defined($current_config{$config})) {
- logit " $config\n";
- $found = 1;
- }
- }
- if (!$found) {
- # try the other half
- doprint "Top half produced no set configs, trying bottom half\n";
-
- # keep the top half off
- @config_off_tmp = @tophalf;
- @tophalf = @start_list[$half + 1 .. $#start_list];
-
- create_config @tophalf;
- read_current_config \%current_config;
- foreach my $config (@tophalf) {
- if (defined($current_config{$config})) {
- logit " $config\n";
- $found = 1;
- }
- }
- if (!$found) {
- doprint "Failed: Can't make new config with current configs\n";
- foreach my $config (@start_list) {
- doprint " CONFIG: $config\n";
- }
- return -1;
+ # first lets enable things in bad config that are enabled in good config
+
+ if ($len_diff > 0) {
+ if ($len_b > 0 || $len_g > 0) {
+ my %tmp_config = %bad_configs;
+
+ doprint "Set tmp config to be bad config with good config values\n";
+ foreach my $item (@diff_arr) {
+ $tmp_config{$item} = $good_configs{$item};
}
- $count = $#tophalf + 1;
- doprint "Testing $count configs\n";
- }
- $ret = run_config_bisect_test $type;
- if ($bisect_manual) {
- $ret = answer_bisect;
- }
- if ($ret) {
- process_passed %current_config;
- return 0;
+ $runtest = process_new_config \%tmp_config, \%new_configs,
+ \%good_configs, \%bad_configs;
}
+ }
- doprint "This config had a failure.\n";
- doprint "Removing these configs that were not set in this config:\n";
- doprint "config copied to $outputdir/config_bad\n";
- run_command "cp -f $output_config $outputdir/config_bad";
+ if (!$runtest && $len_diff > 0) {
- # A config exists in this group that was bad.
- foreach my $config (keys %config_list) {
- if (!defined($current_config{$config})) {
- doprint " removing $config\n";
- delete $config_list{$config};
- }
+ if ($len_diff == 1) {
+ process_failed $diff_arr[0];
+ return 1;
}
+ my %tmp_config = %bad_configs;
- @start_list = @tophalf;
+ my $half = int($#diff_arr / 2);
+ my @tophalf = @diff_arr[0 .. $half];
- if ($#start_list == 0) {
- process_failed $start_list[0];
- return 1;
+ doprint "Settings bisect with top half:\n";
+ doprint "Set tmp config to be bad config with some good config values\n";
+ foreach my $item (@tophalf) {
+ $tmp_config{$item} = $good_configs{$item};
}
- # remove half the configs we are looking at and see if
- # they are good.
- $half = int($#start_list / 2);
- } while ($#start_list > 0);
+ $runtest = process_new_config \%tmp_config, \%new_configs,
+ \%good_configs, \%bad_configs;
- # we found a single config, try it again unless we are running manually
+ if (!$runtest) {
+ my %tmp_config = %bad_configs;
- if ($bisect_manual) {
- process_failed $start_list[0];
- return 1;
- }
+ doprint "Try bottom half\n";
- my @tophalf = @start_list[0 .. 0];
+ my @bottomhalf = @diff_arr[$half+1 .. $#diff_arr];
- $ret = run_config_bisect_test $type;
- if ($ret) {
- process_passed %current_config;
+ foreach my $item (@bottomhalf) {
+ $tmp_config{$item} = $good_configs{$item};
+ }
+
+ $runtest = process_new_config \%tmp_config, \%new_configs,
+ \%good_configs, \%bad_configs;
+ }
+ }
+
+ if ($runtest) {
+ $ret = run_config_bisect_test $type;
+ if ($ret) {
+ doprint "NEW GOOD CONFIG\n";
+ %good_configs = %new_configs;
+ run_command "mv $good_config ${good_config}.last";
+ save_config \%good_configs, $good_config;
+ %{$pgood} = %good_configs;
+ } else {
+ doprint "NEW BAD CONFIG\n";
+ %bad_configs = %new_configs;
+ run_command "mv $bad_config ${bad_config}.last";
+ save_config \%bad_configs, $bad_config;
+ %{$pbad} = %bad_configs;
+ }
return 0;
}
- process_failed $start_list[0];
- return 1;
+ fail "Hmm, need to do a mix match?\n";
+ return -1;
}
sub config_bisect {
my ($i) = @_;
- my $start_config = $config_bisect;
+ my $type = $config_bisect_type;
+ my $ret;
- my $tmpconfig = "$tmpdir/use_config";
+ $bad_config = $config_bisect;
if (defined($config_bisect_good)) {
- process_config_ignore $config_bisect_good;
- }
-
- # Make the file with the bad config and the min config
- if (defined($minconfig)) {
- # read the min config for things to ignore
- run_command "cp $minconfig $tmpconfig" or
- dodie "failed to copy $minconfig to $tmpconfig";
+ $good_config = $config_bisect_good;
+ } elsif (defined($minconfig)) {
+ $good_config = $minconfig;
} else {
- unlink $tmpconfig;
- }
-
- if (-f $tmpconfig) {
- load_force_config($tmpconfig);
- process_config_ignore $tmpconfig;
- }
-
- # now process the start config
- run_command "cp $start_config $output_config" or
- dodie "failed to copy $start_config to $output_config";
-
- # read directly what we want to check
- my %config_check;
- open (IN, $output_config)
- or dodie "failed to open $output_config";
-
- while (<IN>) {
- if (/^((CONFIG\S*)=.*)/) {
- $config_check{$2} = $1;
+ doprint "No config specified, checking if defconfig works";
+ $ret = run_bisect_test $type, "defconfig";
+ if (!$ret) {
+ fail "Have no good config to compare with, please set CONFIG_BISECT_GOOD";
+ return 1;
}
+ $good_config = $output_config;
}
- close(IN);
- # Now run oldconfig with the minconfig
- make_oldconfig;
+ # we don't want min configs to cause issues here.
+ doprint "Disabling 'MIN_CONFIG' for this test\n";
+ undef $minconfig;
- # check to see what we lost (or gained)
- open (IN, $output_config)
- or dodie "Failed to read $start_config";
+ my %good_configs;
+ my %bad_configs;
+ my %tmp_configs;
- my %removed_configs;
- my %added_configs;
+ doprint "Run good configs through make oldconfig\n";
+ assign_configs \%tmp_configs, $good_config;
+ create_config "$good_config", \%tmp_configs;
+ assign_configs \%good_configs, $output_config;
- while (<IN>) {
- if (/^((CONFIG\S*)=.*)/) {
- # save off all options
- $config_set{$2} = $1;
- if (defined($config_check{$2})) {
- if (defined($config_ignore{$2})) {
- $removed_configs{$2} = $1;
- } else {
- $config_list{$2} = $1;
- }
- } elsif (!defined($config_ignore{$2})) {
- $added_configs{$2} = $1;
- $config_list{$2} = $1;
- }
- } elsif (/^# ((CONFIG\S*).*)/) {
- # Keep these configs disabled
- $config_set{$2} = $1;
- $config_off{$2} = $1;
- }
- }
- close(IN);
+ doprint "Run bad configs through make oldconfig\n";
+ assign_configs \%tmp_configs, $bad_config;
+ create_config "$bad_config", \%tmp_configs;
+ assign_configs \%bad_configs, $output_config;
- my @confs = keys %removed_configs;
- if ($#confs >= 0) {
- doprint "Configs overridden by default configs and removed from check:\n";
- foreach my $config (@confs) {
- doprint " $config\n";
- }
- }
- @confs = keys %added_configs;
- if ($#confs >= 0) {
- doprint "Configs appearing in make oldconfig and added:\n";
- foreach my $config (@confs) {
- doprint " $config\n";
- }
- }
+ $good_config = "$tmpdir/good_config";
+ $bad_config = "$tmpdir/bad_config";
+
+ save_config \%good_configs, $good_config;
+ save_config \%bad_configs, $bad_config;
- my %config_test;
- my $once = 0;
- @config_off_tmp = ();
+ if (defined($config_bisect_check) && $config_bisect_check ne "0") {
+ if ($config_bisect_check ne "good") {
+ doprint "Testing bad config\n";
- # Sometimes kconfig does weird things. We must make sure
- # that the config we autocreate has everything we need
- # to test, otherwise we may miss testing configs, or
- # may not be able to create a new config.
- # Here we create a config with everything set.
- create_config (keys %config_list);
- read_current_config \%config_test;
- foreach my $config (keys %config_list) {
- if (!defined($config_test{$config})) {
- if (!$once) {
- $once = 1;
- doprint "Configs not produced by kconfig (will not be checked):\n";
+ $ret = run_bisect_test $type, "useconfig:$bad_config";
+ if ($ret) {
+ fail "Bad config succeeded when expected to fail!";
+ return 0;
}
- doprint " $config\n";
- delete $config_list{$config};
}
- }
- my $ret;
+ if ($config_bisect_check ne "bad") {
+ doprint "Testing good config\n";
- if (defined($config_bisect_check) && $config_bisect_check) {
- doprint " Checking to make sure bad config with min config fails\n";
- create_config keys %config_list;
- $ret = run_config_bisect_test $config_bisect_type;
- if ($ret) {
- doprint " FAILED! Bad config with min config boots fine\n";
- return -1;
+ $ret = run_bisect_test $type, "useconfig:$good_config";
+ if (!$ret) {
+ fail "Good config failed when expected to succeed!";
+ return 0;
+ }
}
- doprint " Bad config with min config fails as expected\n";
}
do {
- $ret = run_config_bisect;
+ $ret = run_config_bisect \%good_configs, \%bad_configs;
} while (!$ret);
return $ret if ($ret < 0);
@@ -3455,29 +3439,6 @@ sub read_depends {
read_kconfig($kconfig);
}
-sub read_config_list {
- my ($config) = @_;
-
- open (IN, $config)
- or dodie "Failed to read $config";
-
- while (<IN>) {
- if (/^((CONFIG\S*)=.*)/) {
- if (!defined($config_ignore{$2})) {
- $config_list{$2} = $1;
- }
- }
- }
-
- close(IN);
-}
-
-sub read_output_config {
- my ($config) = @_;
-
- assign_configs \%config_ignore, $config;
-}
-
sub make_new_config {
my @configs = @_;
@@ -3863,7 +3824,7 @@ sub make_warnings_file {
success $i;
}
-$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl config-file\n";
+$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl [config-file]\n";
if ($#ARGV == 0) {
$ktest_config = $ARGV[0];
@@ -3873,8 +3834,6 @@ if ($#ARGV == 0) {
exit 0;
}
}
-} else {
- $ktest_config = "ktest.conf";
}
if (! -f $ktest_config) {
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index 172eec4517fb..911e45ad657a 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -1098,49 +1098,35 @@
#
# The way it works is this:
#
-# First it finds a config to work with. Since a different version, or
-# MIN_CONFIG may cause different dependecies, it must run through this
-# preparation.
+# You can specify a good config with CONFIG_BISECT_GOOD, otherwise it
+# will use the MIN_CONFIG, and if that's not specified, it will use
+# the config that comes with "make defconfig".
#
-# Overwrites any config set in the bad config with a config set in
-# either the MIN_CONFIG or ADD_CONFIG. Thus, make sure these configs
-# are minimal and do not disable configs you want to test:
-# (ie. # CONFIG_FOO is not set).
+# It runs both the good and bad configs through a make oldconfig to
+# make sure that they are set up for the kernel that is checked out.
#
-# An oldconfig is run on the bad config and any new config that
-# appears will be added to the configs to test.
+# It then reads the configs that are set, as well as the ones that are
+# not set for both the good and bad configs, and then compares them.
+# It will set half of the good configs within the bad config (note,
+# "set" means to make the bad config match the good config, a config
+# in the good config that is off, will be turned off in the bad
+# config. That is considered a "set").
#
-# Finally, it generates a config with the above result and runs it
-# again through make oldconfig to produce a config that should be
-# satisfied by kconfig.
+# It tests this new config and if it works, it becomes the new good
+# config, otherwise it becomes the new bad config. It continues this
+# process until there's only one config left and it will report that
+# config.
#
-# Then it starts the bisect.
+# The "bad config" can also be a config that is needed to boot but was
+# disabled because it depended on something that wasn't set.
#
-# The configs to test are cut in half. If all the configs in this
-# half depend on a config in the other half, then the other half
-# is tested instead. If no configs are enabled by either half, then
-# this means a circular dependency exists and the test fails.
+# During this process, it saves the current good and bad configs in
+# ${TMP_DIR}/good_config and ${TMP_DIR}/bad_config respectively.
+# If you stop the test, you can copy them to a new location to
+# reuse them again.
#
-# A config is created with the test half, and the bisect test is run.
-#
-# If the bisect succeeds, then all configs in the generated config
-# are removed from the configs to test and added to the configs that
-# will be enabled for all builds (they will be enabled, but not be part
-# of the configs to examine).
-#
-# If the bisect fails, then all test configs that were not enabled by
-# the config file are removed from the test. These configs will not
-# be enabled in future tests. Since current config failed, we consider
-# this to be a subset of the config that we started with.
-#
-# When we are down to one config, it is considered the bad config.
-#
-# Note, the config chosen may not be the true bad config. Due to
-# dependencies and selections of the kbuild system, mulitple
-# configs may be needed to cause a failure. If you disable the
-# config that was found and restart the test, if the test fails
-# again, it is recommended to rerun the config_bisect with a new
-# bad config without the found config enabled.
+# Although the MIN_CONFIG may be the config it starts with, the
+# MIN_CONFIG is ignored.
#
# The option BUILD_TYPE will be ignored.
#
@@ -1160,13 +1146,16 @@
# CONFIG_BISECT_GOOD (optional)
# If you have a good config to start with, then you
# can specify it with CONFIG_BISECT_GOOD. Otherwise
-# the MIN_CONFIG is the base.
+# the MIN_CONFIG is the base, if MIN_CONFIG is not set
+# It will build a config with "make defconfig"
#
# CONFIG_BISECT_CHECK (optional)
# Set this to 1 if you want to confirm that the config ktest
# generates (the bad config with the min config) is still bad.
# It may be that the min config fixes what broke the bad config
# and the test will not return a result.
+# Set it to "good" to test only the good config and set it
+# to "bad" to only test the bad config.
#
# Example:
# TEST_START
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
index ee1f6cae3d70..3f6c9b78d177 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
@@ -54,10 +54,16 @@ do
if test -f "$i/qemu-cmd"
then
print_bug qemu failed
+ echo " $i"
+ elif test -f "$i/buildonly"
+ then
+ echo Build-only run, no boot/test
+ configcheck.sh $i/.config $i/ConfigFragment
+ parse-build.sh $i/Make.out $configfile
else
print_bug Build failed
+ echo " $i"
fi
- echo " $i"
fi
done
done
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
index 27e544e29510..0f69dcbf9def 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
@@ -42,6 +42,7 @@ grace=120
T=/tmp/kvm-test-1-run.sh.$$
trap 'rm -rf $T' 0
+touch $T
. $KVM/bin/functions.sh
. $KVPATH/ver_functions.sh
@@ -131,7 +132,10 @@ boot_args=$6
cd $KVM
kstarttime=`awk 'BEGIN { print systime() }' < /dev/null`
-echo ' ---' `date`: Starting kernel
+if test -z "$TORTURE_BUILDONLY"
+then
+ echo ' ---' `date`: Starting kernel
+fi
# Generate -smp qemu argument.
qemu_args="-nographic $qemu_args"
@@ -157,12 +161,13 @@ boot_args="`configfrag_boot_params "$boot_args" "$config_template"`"
# Generate kernel-version-specific boot parameters
boot_args="`per_version_boot_params "$boot_args" $builddir/.config $seconds`"
-echo $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd
if test -n "$TORTURE_BUILDONLY"
then
echo Build-only run specified, boot/test omitted.
+ touch $resdir/buildonly
exit 0
fi
+echo $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd
( $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append "$qemu_append $boot_args"; echo $? > $resdir/qemu-retval ) &
qemu_pid=$!
commandcompleted=0
diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh
index 40285c58653e..589e9c38413b 100644
--- a/tools/testing/selftests/rcutorture/bin/kvm.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm.sh
@@ -340,12 +340,18 @@ function dump(first, pastlast)
for (j = 1; j < jn; j++) {
builddir=KVM "/b" j
print "rm -f " builddir ".ready"
- print "echo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date`";
- print "echo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date` >> " rd "/log";
+ print "if test -z \"$TORTURE_BUILDONLY\""
+ print "then"
+ print "\techo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date`";
+ print "\techo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date` >> " rd "/log";
+ print "fi"
}
print "wait"
- print "echo ---- All kernel runs complete. `date`";
- print "echo ---- All kernel runs complete. `date` >> " rd "/log";
+ print "if test -z \"$TORTURE_BUILDONLY\""
+ print "then"
+ print "\techo ---- All kernel runs complete. `date`";
+ print "\techo ---- All kernel runs complete. `date` >> " rd "/log";
+ print "fi"
for (j = 1; j < jn; j++) {
builddir=KVM "/b" j
print "echo ----", cfr[j], cpusr[j] ovf ": Build/run results:";
@@ -385,10 +391,7 @@ echo
echo
echo " --- `date` Test summary:"
echo Results directory: $resdir/$ds
-if test -z "$TORTURE_BUILDONLY"
-then
- kvm-recheck.sh $resdir/$ds
-fi
+kvm-recheck.sh $resdir/$ds
___EOF___
if test "$dryrun" = script
@@ -403,7 +406,7 @@ then
sed -e 's/:.*$//' -e 's/^echo //'
exit 0
else
- # Not a dryru, so run the script.
+ # Not a dryrun, so run the script.
sh $T/script
fi
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE01 b/tools/testing/selftests/rcutorture/configs/rcu/TREE01
index 9c827ec59a97..063b7079c621 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE01
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE01
@@ -15,7 +15,6 @@ CONFIG_RCU_FANOUT_EXACT=n
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_ZERO=y
CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
CONFIG_RCU_CPU_STALL_INFO=n
CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=n
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE02 b/tools/testing/selftests/rcutorture/configs/rcu/TREE02
index 1a777b5f68b5..ea119ba2f7d4 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE02
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE02
@@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_EXACT=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=n
-CONFIG_PROVE_RCU_DELAY=n
CONFIG_RCU_CPU_STALL_INFO=n
CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_RCU_BOOST=n
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T b/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T
index 61c8d9ce5bb2..19cf9485f48a 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T
@@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_EXACT=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=n
-CONFIG_PROVE_RCU_DELAY=n
CONFIG_RCU_CPU_STALL_INFO=n
CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_RCU_BOOST=n
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE03 b/tools/testing/selftests/rcutorture/configs/rcu/TREE03
index c1f111c1561b..f4567fb3e332 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE03
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE03
@@ -14,7 +14,6 @@ CONFIG_RCU_FANOUT_LEAF=4
CONFIG_RCU_FANOUT_EXACT=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
CONFIG_RCU_CPU_STALL_INFO=n
CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE04 b/tools/testing/selftests/rcutorture/configs/rcu/TREE04
index 7dbd27ce17a4..0a262fbb0c12 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE04
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE04
@@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_LEAF=2
CONFIG_RCU_FANOUT_EXACT=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
CONFIG_RCU_CPU_STALL_INFO=y
CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE05 b/tools/testing/selftests/rcutorture/configs/rcu/TREE05
index d0f32e574743..3a06b97e9a73 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE05
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE05
@@ -18,7 +18,6 @@ CONFIG_RCU_NOCB_CPU_NONE=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
-CONFIG_PROVE_RCU_DELAY=y
CONFIG_RCU_CPU_STALL_INFO=n
CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE06 b/tools/testing/selftests/rcutorture/configs/rcu/TREE06
index 2e477dfb9c57..8f084cca91bf 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE06
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE06
@@ -19,7 +19,6 @@ CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
-CONFIG_PROVE_RCU_DELAY=n
CONFIG_RCU_CPU_STALL_INFO=n
CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE07 b/tools/testing/selftests/rcutorture/configs/rcu/TREE07
index 042f86ef362a..ab6225506909 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE07
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE07
@@ -17,7 +17,6 @@ CONFIG_RCU_FANOUT_LEAF=2
CONFIG_RCU_FANOUT_EXACT=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
CONFIG_RCU_CPU_STALL_INFO=y
CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE08 b/tools/testing/selftests/rcutorture/configs/rcu/TREE08
index 3438cee1e3c5..69a2e255bf98 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE08
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE08
@@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_LEAF=2
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
CONFIG_RCU_CPU_STALL_INFO=n
CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=n
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T b/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T
index bf4523d3e44c..a0f32fb8f17e 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T
@@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_LEAF=2
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
CONFIG_RCU_CPU_STALL_INFO=n
CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=n
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE09 b/tools/testing/selftests/rcutorture/configs/rcu/TREE09
index 81e4f7c0bf0b..b7a62a540ad1 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE09
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE09
@@ -13,7 +13,6 @@ CONFIG_SUSPEND=n
CONFIG_HIBERNATION=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
CONFIG_RCU_CPU_STALL_INFO=n
CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=n
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp
index ef624ce73d8e..a55c00877fe4 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp
+++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp
@@ -13,7 +13,6 @@ CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
#CHECK#CONFIG_TREE_PREEMPT_RCU=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_PROVE_RCU_DELAY=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_RT_MUTEXES=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp
index ef624ce73d8e..a55c00877fe4 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp
+++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp
@@ -13,7 +13,6 @@ CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
#CHECK#CONFIG_TREE_PREEMPT_RCU=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_PROVE_RCU_DELAY=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_RT_MUTEXES=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp
index ef624ce73d8e..a55c00877fe4 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp
+++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp
@@ -13,7 +13,6 @@ CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
#CHECK#CONFIG_TREE_PREEMPT_RCU=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_PROVE_RCU_DELAY=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_RT_MUTEXES=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp
index ef624ce73d8e..a55c00877fe4 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp
+++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp
@@ -13,7 +13,6 @@ CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
#CHECK#CONFIG_TREE_PREEMPT_RCU=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_PROVE_RCU_DELAY=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_RT_MUTEXES=y
diff --git a/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt b/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt
index adbb76cffb49..3e588db86a17 100644
--- a/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt
+++ b/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt
@@ -14,7 +14,6 @@ CONFIG_NO_HZ_FULL_SYSIDLE -- Do one.
CONFIG_PREEMPT -- Do half. (First three and #8.)
CONFIG_PROVE_LOCKING -- Do all but two, covering CONFIG_PROVE_RCU and not.
CONFIG_PROVE_RCU -- Do all but one under CONFIG_PROVE_LOCKING.
-CONFIG_PROVE_RCU_DELAY -- Do one.
CONFIG_RCU_BOOST -- one of TREE_PREEMPT_RCU.
CONFIG_RCU_BOOST_PRIO -- set to 2 for _BOOST testing.
CONFIG_RCU_CPU_STALL_INFO -- do one with and without _VERBOSE.