summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2010-12-13ENGR00133595 NAND : fix the wrong position for ONFI-nand's Block-mark swappingHuang Shijie
2010-12-13ENGR00133590 UART: let user control HW flow controlZhang Jiejing
2010-12-13ENGR00133580 PMIC: Configure battery driver as a moduleNancy Chen
2010-12-13ENGR00133380 FEC: Fix dhcp failure at i.MX28 EVKFrank Li
2010-12-13ENGR00133511 MX28: Fixed 1588 clock divider setting errorXie Xiaobo
2010-12-13ENGR00133377 mx28: fix system suspend twice issueZhou Jingyu
2010-12-13ENGR00133489 IMX USB-OTG:usb otg host mode wakeup may not workHu hui
2010-12-13ENGR00132954 - EPDC fb: SET_TEMPERATURE causes hangDanny Nold
2010-12-13ENGR00132537-3 - MSL: Add 6.0" V220 panel, update other E-Ink panelsDanny Nold
2010-12-13ENGR00132537-2 - Firmware: Added new 6.0" V220 waveform file, renamed othersDanny Nold
2010-12-13ENGR00132537-1 - EPDC fb/PxP: Support conversion from grayscale to monochromeDanny Nold
2010-12-13ENGR00133485 mx28: low speed device doesn't be supported at otg portPeter Chen
2010-12-13ENGR00133478-2 IMX USB:move clk_enable from irq context to thread contextHu hui
2010-12-13ENGR00133478-1 IMX USB:move clk_enable from irq context to thread contextHu hui
2010-12-13ENGR00133310 NAND : update the mtd->ecc_stats when reading page failedHuang Shijie
2010-12-13ENGR00133442 NAND : remove redundant clock operationsHuang Shijie
2010-12-13ENGR00133309 NAND : fix compile warnings for GPMIHuang Shijie
2010-12-13ENGR00133178-10 NAND : add ddr_clk for imx50Huang Shijie
2010-12-13ENGR00133178-9 NAND : add ONFI init codeHuang Shijie
2010-12-13ENGR00133178-8 NAND : add ONFI NAND commandsHuang Shijie
2010-12-13ENGR00133178-7 NAND : set proper ECC parameters for ONFI nandHuang Shijie
2010-12-13ENGR00133178-6 NAND : add extra_init() hook for ONFI nandHuang Shijie
2010-12-13ENGR00133178-5 NAND : add device info for ONFI nandHuang Shijie
2010-12-13ENGR00133178-4 NAND : add is_onfi_nand field for nand_device_info{}Huang Shijie
2010-12-13ENGR00133178-3 NAND : add ID infomation for ONFI nandHuang Shijie
2010-12-13ENGR00133178-2 DMA : remove mutex for each channelHuang Shijie
2010-12-13ENGR00133178-1 NAND : add set_parent()/set_rate() for GPMIHuang Shijie
2010-12-13ENGR00133440 mx23/mx28: add CONFIG_I2C_CHARDEV in defconfigAisheng.Dong
2010-12-13ENGR00133429 MX51 DVFS_PER: Set LP voltage to 1.25 VNancy Chen
2010-12-13ENGR00127010-2 mxs: change i2c device addressAisheng.Dong
2010-12-13ENGR00127010-1 mxs i2c: make i2c addr handling be compatible with i2c frameworkAisheng.Dong
2010-12-13ENGR00133268 MX28: DVFS support mDDRFrank Li
2010-12-13ENGR00133034 ipuv3: fix black flash issue during high resolution video playbackJason Chen
2010-12-13ENGR00131983-2 UBIBLOCK: Fix crash when run ubiattachFrank Li
2010-12-13ENGR00131983-1 MTD: Fix wrong check register_blkdev return valueFrank Li
2010-12-13ENGR00133261 MX53 EVK:Correct PWM backlight frequencyLiu Ying
2010-12-13ENGR00133183 MX50 EVK: Support PWM LCD backlightLiu Ying
2010-12-13ENGR00133150: Fix early_param setting for 2.6.35 kernelDinh Nguyen
2010-12-13ENGR00133149 MX50: external speaker amp shutdownAlan Tull
2010-12-13ENGR00122832 MX28: Support for IEEE 1588 interface functionalityXie Xiaobo
2010-12-13ENGR00132538 MX53: Get the CAN clk via dev_id and con_idWilliam Lai
2010-12-13ENGR00132990 MXC V4L2 capture:Check zero width/height in VIDIOC_S_FMTLiu Ying
2010-12-13ENGR00131644 PMIC: Charger removal may not be detectedNancy Chen
2010-12-13ENGR00132971 Workaround for imx5x M4IF burst len errata for armv7 neonSammy He
2010-12-13ENGR00126874 backlight:Fix backlight value can't keep after suspend and resume.Frank Li
2010-12-13ENGR00132776 LDB:Add default 1080P split mode for DI1Liu Ying
2010-12-13ENGR00132882 MXC V4L2 capture:Check slave is present when open devLiu Ying
2010-12-13ENGR00132935-3 MXC PWM:Use gpio when inverted pwm keeps lowLiu Ying
2010-12-13ENGR00132935-2 MX53 ARD:Add pwm enable/disable pad functionsLiu Ying
2010-12-13ENGR00132935-1 fsl dev:Add pwm enable/disable pad functionsLiu Ying