summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-10rcu: reduce the number of spurious RCU_SOFTIRQ invocationsPaul E. McKenney
Lai Jiangshan noted that up to 10% of the RCU_SOFTIRQ are spurious, and traced this down to the fact that the current grace-period machinery will uselessly raise RCU_SOFTIRQ when a given CPU needs to go through a quiescent state, but has not yet done so. In this situation, there might well be nothing that RCU_SOFTIRQ can do, and the overhead can be worth worrying about in the ksoftirqd case. This patch therefore avoids raising RCU_SOFTIRQ in this situation. Changes since v1 (http://lkml.org/lkml/2010/3/30/122 from Lai Jiangshan): o Omit the rcu_qs_pending() prechecks, as they aren't that much less expensive than the quiescent-state checks. o Merge with the set_need_resched() patch that reduces IPIs. o Add the new n_rp_report_qs field to the rcu_pending tracing output. o Update the tracing documentation accordingly. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: permit discontiguous cpu_possible_mask CPU numberingPaul E. McKenney
TREE_RCU assumes that CPU numbering is contiguous, but some users need large holes in the numbering to better map to hardware layout. This patch makes TREE_RCU (and TREE_PREEMPT_RCU) tolerate large holes in the CPU numbering. However, NR_CPUS must still be greater than the largest CPU number. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: improve RCU CPU stall-warning messagesPaul E. McKenney
The existing RCU CPU stall-warning messages can be confusing, especially in the case where one CPU detects a single other stalled CPU. In addition, the console messages did not say which flavor of RCU detected the stall, which can make it difficult to work out exactly what is causing the stall. This commit improves these messages. Requested-by: Dhaval Giani <dhaval.giani@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: print boot-time console messages if RCU configs out of ordinaryPaul E. McKenney
Print boot-time messages if tracing is enabled, if fanout is set to non-default values, if exact fanout is specified, if accelerated dyntick-idle grace periods have been enabled, if RCU-lockdep is enabled, if rcutorture has been boot-time enabled, if the CPU stall detector has been disabled, or if four-level hierarchy has been enabled. This is all for TREE_RCU and TREE_PREEMPT_RCU. TINY_RCU will be handled separately, if at all. Suggested-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: disable CPU stall warnings upon panicPaul E. McKenney
The current RCU CPU stall warnings remain enabled even after a panic occurs, which some people have found to be a bit counterproductive. This patch therefore uses a notifier to disable stall warnings once a panic occurs. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: enable CPU_STALL_VERBOSE by defaultPaul E. McKenney
The CPU_STALL_VERBOSE kernel configuration parameter was added to 2.6.34 to identify any preempted/blocked tasks that were preventing the current grace period from completing when running preemptible RCU. As is conventional for new configurations parameters, this defaulted disabled. It is now time to enable it by default. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: slim down rcutiny by removing rcu_scheduler_active and friendsPaul E. McKenney
TINY_RCU does not need rcu_scheduler_active unless CONFIG_DEBUG_LOCK_ALLOC. So conditionally compile rcu_scheduler_active in order to slim down rcutiny a bit more. Also gets rid of an EXPORT_SYMBOL_GPL, which is responsible for most of the slimming. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: refactor RCU's context-switch handlingPaul E. McKenney
The addition of preemptible RCU to treercu resulted in a bit of confusion and inefficiency surrounding the handling of context switches for RCU-sched and for RCU-preempt. For RCU-sched, a context switch is a quiescent state, pure and simple, just like it always has been. For RCU-preempt, a context switch is in no way a quiescent state, but special handling is required when a task blocks in an RCU read-side critical section. However, the callout from the scheduler and the outer loop in ksoftirqd still calls something named rcu_sched_qs(), whose name is no longer accurate. Furthermore, when rcu_check_callbacks() notes an RCU-sched quiescent state, it ends up unnecessarily (though harmlessly, aside from the performance hit) enqueuing the current task if it happens to be running in an RCU-preempt read-side critical section. This not only increases the maximum latency of scheduler_tick(), it also needlessly increases the overhead of the next outermost rcu_read_unlock() invocation. This patch addresses this situation by separating the notion of RCU's context-switch handling from that of RCU-sched's quiescent states. The context-switch handling is covered by rcu_note_context_switch() in general and by rcu_preempt_note_context_switch() for preemptible RCU. This permits rcu_sched_qs() to handle quiescent states and only quiescent states. It also reduces the maximum latency of scheduler_tick(), though probably by much less than a microsecond. Finally, it means that tasks within preemptible-RCU read-side critical sections avoid incurring the overhead of queuing unless there really is a context switch. Suggested-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org>
2010-05-10rcu: rename rcutiny rcu_ctrlblk to rcu_sched_ctrlblkPaul E. McKenney
Make naming line up in preparation for CONFIG_TINY_PREEMPT_RCU. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: shrink rcutiny by making synchronize_rcu_bh() be inlinePaul E. McKenney
Because synchronize_rcu_bh() is identical to synchronize_sched(), make the former a static inline invoking the latter, saving the overhead of an EXPORT_SYMBOL_GPL() and the duplicate code. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: fix now-bogus rcu_scheduler_active comments.Paul E. McKenney
The rcu_scheduler_active check has been wrapped into the new debug_lockdep_rcu_enabled() function, so update the comments to reflect this new reality. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: Fix bogus CONFIG_PROVE_LOCKING in comments to reflect reality.Paul E. McKenney
It is CONFIG_DEBUG_LOCK_ALLOC rather than CONFIG_PROVE_LOCKING, so fix it. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: ignore offline CPUs in last non-dyntick-idle CPU checkLai Jiangshan
Offline CPUs are not in nohz_cpu_mask, but can be ignored when checking for the last non-dyntick-idle CPU. This patch therefore only checks online CPUs for not being dyntick idle, allowing fast entry into full-system dyntick-idle state even when there are some offline CPUs. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: move some code from macro to functionLai Jiangshan
Shrink the RCU_INIT_FLAVOR() macro by moving all but the initialization of the ->rda[] array to rcu_init_one(). The call to rcu_init_one() can then be moved to the end of the RCU_INIT_FLAVOR() macro, which is required because rcu_boot_init_percpu_data(), which is now called from rcu_init_one(), depends on the initialization of the ->rda[] array. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: make dead code really deadLai Jiangshan
cleanup: make dead code really dead Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: substitute set_need_resched for sending resched IPIsPaul E. McKenney
This patch adds a check to __rcu_pending() that does a local set_need_resched() if the current CPU is holding up the current grace period and if force_quiescent_state() will be called soon. The goal is to reduce the probability that force_quiescent_state() will need to do smp_send_reschedule(), which sends an IPI and is therefore more expensive on most architectures. Signed-off-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
2010-05-10rcu: optionally leave lockdep enabled after RCU lockdep splatLai Jiangshan
There is no need to disable lockdep after an RCU lockdep splat, so remove the debug_lockdeps_off() from lockdep_rcu_dereference(). To avoid repeated lockdep splats, use a static variable in the inlined rcu_dereference_check() and rcu_dereference_protected() macros so that a given instance splats only once, but so that multiple instances can be detected per boot. This is controlled by a new config variable CONFIG_PROVE_RCU_REPEATEDLY, which is disabled by default. This provides the normal lockdep behavior by default, but permits people who want to find multiple RCU-lockdep splats per boot to easily do so. Requested-by: Eric Paris <eparis@redhat.com> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Tested-by: Eric Paris <eparis@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-09Linux 2.6.34-rc7v2.6.34-rc7Linus Torvalds
2010-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Retry commands with UNIT_ATTENTION sense codes to fix ext3/ext4 I/O error [SCSI] Enable retries for SYNCRONIZE_CACHE commands to fix I/O error [SCSI] scsi_debug: virtual_gb ignores sector_size [SCSI] libiscsi: regression: fix header digest errors [SCSI] fix locking around blk_abort_request() [SCSI] advansys: fix narrow board error path
2010-05-09cpuidle: Fix incorrect optimizationArjan van de Ven
commit 672917dcc78 ("cpuidle: menu governor: reduce latency on exit") added an optimization, where the analysis on the past idle period moved from the end of idle, to the beginning of the new idle. Unfortunately, this optimization had a bug where it zeroed one key variable for new use, that is needed for the analysis. The fix is simple, zero the variable after doing the work from the previous idle. During the audit of the code that found this issue, another issue was also found; the ->measured_us data structure member is never set, a local variable is always used instead. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Corrado Zoccolo <czoccolo@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-07Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: restore ability of spare drives to spin down. md/raid6: Fix raid-6 read-error correction in degraded state
2010-05-07Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix compilation after 16bit state locking changes pcmcia: order userspace suspend and resume requests pcmcia: avoid pccard_validate_cis failure in resume callpath
2010-05-07Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: blk-cgroup: Fix an RCU warning in blkiocg_create() blk-cgroup: Fix RCU correctness warning in cfq_init_queue() drbd: don't expose failed local READ to upper layers
2010-05-07Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/ttm: Remove the ttm_bo_block_reservation() function. drm/ttm: Remove some leftover debug messages. drm/radeon: async event synchronization for drmWaitVblank
2010-05-07virtio: initialize earlierStijn Tintel
Move initialization of the virtio framework before the initialization of mtd, so that block2mtd can be used on virtio-based block devices. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15644 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-07Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Fix RCU issues in the NFSv4 delegation code NFSv4: Fix the locking in nfs_inode_reclaim_delegation()
2010-05-07Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: sleep: init_set_sci_en_on_resume for Dell Studio 155x ACPI: fix acpi_hest_firmware_first_pci() caused oops sbshc: acpi_device_class "smbus_host_controller" too long power_meter: acpi_device_class "power_meter_resource" too long acpi_pad: "processor_aggregator" name too long PNP: don't check for conflicts with bridge windows ACPI: DMI init_set_sci_en_on_resume for multiple Lenovo ThinkPads PNPACPI: compute Address Space length rather than using _LEN ACPI: silence kmemcheck false positive
2010-05-07Merge branch 'v4l_for_2.6.34' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: pxa_camera: move fifo reset direct before dma start V4L/DVB: video: testing unsigned for less than 0 V4L/DVB: mx1-camera: compile fix V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference" V4L/DVB: ngene: Workaround for stuck DiSEqC pin V4L/DVB: saa7146: fix regression of the av7110/budget-av driver V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1 V4L/DVB: feature-removal: announce videotext.h removal V4L/DVB: V4L - vpfe capture - fix for kernel crash V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driver V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driver V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declaration V4L/DVB: saa7146: fix up bytesperline if it is an impossible value V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation fails V4L/DVB: V4L - Makfile:Removed duplicate entry of davinci V4L/DVB: omap24xxcam: potential buffer overflow
2010-05-07Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: create rcu_my_thread_group_empty() wrapper memcg: css_id() must be called under rcu_read_lock() cgroup: Check task_lock in task_subsys_state() sched: Fix an RCU warning in print_task() cgroup: Fix an RCU warning in alloc_css_id() cgroup: Fix an RCU warning in cgroup_path() KEYS: Fix an RCU warning in the reading of user keys KEYS: Fix an RCU warning
2010-05-07md: restore ability of spare drives to spin down.NeilBrown
Some time ago we stopped the clean/active metadata updates from being written to a 'spare' device in most cases so that it could spin down and say spun down. Device failure/removal etc are still recorded on spares. However commit 51d5668cb2e3fd1827a55 broke this 50% of the time, depending on whether the event count is even or odd. The change log entry said: This means that the alignment between 'odd/even' and 'clean/dirty' might take a little longer to attain, how ever the code makes no attempt to create that alignment, so it could take arbitrarily long. So when we find that clean/dirty is not aligned with odd/even, force a second metadata-update immediately. There are already cases where a second metadata-update is needed immediately (e.g. when a device fails during the metadata update). We just piggy-back on that. Reported-by: Joe Bryant <tenminjoe@yahoo.com> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
2010-05-07md/raid6: Fix raid-6 read-error correction in degraded stateGabriele A. Trombetti
Fix: Raid-6 was not trying to correct a read-error when in singly-degraded state and was instead dropping one more device, going to doubly-degraded state. This patch fixes this behaviour. Tested-by: Janos Haar <janos.haar@netcenter.hu> Signed-off-by: Gabriele A. Trombetti <g.trombetti.lkrnl1213@logicschema.com> Reported-by: Janos Haar <janos.haar@netcenter.hu> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
2010-05-07blk-cgroup: Fix an RCU warning in blkiocg_create()Li Zefan
with CONFIG_PROVE_RCU=y, a warning can be triggered: # mount -t cgroup -o blkio xxx /mnt # mkdir /mnt/subgroup ... kernel/cgroup.c:4442 invoked rcu_dereference_check() without protection! ... To fix this, we avoid caling css_depth() here, which is a bit simpler than the original code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-06Merge branches 'bugzilla-14337', 'bugzilla-14998', 'bugzilla-15407', ↵Len Brown
'bugzilla-15903' and 'misc-2.6.34' into release
2010-05-07drm/ttm: Remove the ttm_bo_block_reservation() function.Thomas Hellstrom
It's unused and buggy in its current form, since it can place a bo in the reserved state without removing it from lru lists. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-07drm/ttm: Remove some leftover debug messages.Thomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-07drm/radeon: async event synchronization for drmWaitVblankJerome Glisse
Bring radeon up to speed with the async event synchronization for drmWaitVblank. See c9a9c5e02aedc1a2815877b0268f886d2640b771 for more information. Without this patch event never get delivered to userspace client. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-06V4L/DVB: pxa_camera: move fifo reset direct before dma startStefan Herbrechtsmeier
Move the fifo reset from pxa_camera_start_capture to pxa_camera_irq direct before the dma start after an end of frame interrupt to prevent images from shifting because of old data at the begin of the frame. Signed-off-by: Stefan Herbrechtsmeier <hbmeier@hni.uni-paderborn.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: video: testing unsigned for less than 0Dan Carpenter
soc_mbus_bytes_per_line() returns -EINVAL on error but we store it in an unsigned int so the test for less than zero doesn't work. I think it always returns "small" positive values so we can just cast it to int here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: mx1-camera: compile fixUwe Kleine-König
This fixes a regression of 7d58289 (mx1: prefix SOC specific defines with MX1_ and deprecate old names) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference"Bjørn Mork
Never call dvb_frontend_detach if we failed to attach a frontend. This fixes the following oops, which will be triggered by a missing stv090x module: [ 8.172997] DVB: registering new adapter (TT-Budget S2-1600 PCI) [ 8.209018] adapter has MAC addr = 00:d0:5c:cc:a7:29 [ 8.328665] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.328753] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 8.562047] DVB: Unable to find symbol stv090x_attach() [ 8.562117] BUG: unable to handle kernel NULL pointer dereference at 000000ac [ 8.562239] IP: [<e08b04a3>] dvb_frontend_detach+0x4/0x67 [dvb_core] Ref http://bugs.debian.org/575207 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: ngene: Workaround for stuck DiSEqC pinOliver Endriss
Send one DiSEqC byte to make sure that the pin is set to low level. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Reviewed-by: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: saa7146: fix regression of the av7110/budget-av driverHans Verkuil
An earlier regression fix for the mxb driver (V4L/DVB: saa7146_vv: fix regression where v4l2_device was registered too late) caused a new regression in the av7110 driver. Reverted the old fix and fixed the problem in the mxb driver instead. Tested on mxb and budget-av cards. The real problem is that the saa7146 framework has separate probe() and attach() driver callbacks which should be rolled into one. This is now done for the mxb driver, but others should do the same. Lack of hardware makes this hard to do, though. I hope to get hold of some hexium cards and then I can try to improve the framework to prevent this from happening again. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not ↵Hans Verkuil
V4L1 v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1 Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: feature-removal: announce videotext.h removalHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: V4L - vpfe capture - fix for kernel crashMuralidharan Karicheri
As part of upstream merge, set_params() function was removed from isif.c. This requires removal of BUG_ON() and check for set_params ptr in vpfe_capture.c. Without this kernel crash dump is seen while bootup on DM365 Also made following changes:- 1) converted error messages to debug messages since it is not right to flood the console with error messages for user mistakes. 2) returns -EINVAL if ioctl is not supported Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driverJohn Ellson
The 0461:0815 camera is spca561 based not spca508 Signed-off-by: John Ellson <john.ellson@comcast.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driverErik Andrén
The 046d:08da usb id shouldn't be associated with the stv06xx driver as they're not compatible with each other. This fixes a bug where Quickcam Messenger cams fail to use its proper driver (gspca-zc3xx), rendering the camera inoperable. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Tested-by: Gabriel Craciunescu <nix.or.die@googlemail.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declarationYong Zhang
Use DECLARE_WAIT_QUEUE_HEAD_ONSTACK to make lockdep happy Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> CC: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: saa7146: fix up bytesperline if it is an impossible valueMichael Hunold
xawtv using DGA on a Radeon graphics card provides bogus values to S_FBUF, which will then screw up overlay video: https://bugs.launchpad.net/ubuntu/+source/xawtv/+bug/499734 This fixes the bytesperline value if it is off completely. Signed-off-by: Michael Hunold <michael@mihu.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation failsMurali Karicheri
This patch fixes a bug in vpfe_probe() that doesn't call mutex_unlock() if memory allocation for ccdc_cfg fails. See also the smatch warning report from Dan Carpenter that shows this as an issue. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-17 04:32:13 +0000